h h 2ç ñ P IP C.M. Lamp A25 - BLTC

調光

PAR38 1000lm

S - type聚光燈 & 泛光燈 - 高效能

可調光

Certificated Mark EMC LVD ErPCertificate Approval

Certificate Approval : ● : Completed : In Progress

Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw

Safety & Environment SpecificationsV series -C.M. Lamp are manufactured to conform to the following safety approbation.

APP Dimming

Base Type : E27 Input Voltage : 100~240VLED Source : OsramBeam Angle : 220∘Total Power Consumption :14W±10%Power output : 12W±10%(Camera : 5W ; LED : 7W)Smart device requirement :To make sure the APP to operate smoothly, it is recommended to use with quad-core processor with 2G RAM and up.APP operating system : iOS 8.0 and up、Android 4.4 and up

V series

IP C.M. Lamp A25

Feature• Easy set-up• 1.0mm Board Fisheye Lens for 360° panorama. • 2 Megapixel CMOS Progressive Sensor• Up to 30 fps at 1280x1024 pixel Resolution• Support Micro SDXC card 64GB for long time

recording.• Built-in Microphone, to audio record.• Support 802.11b/g/n, 300Mbps wireless

Read the following guidelines before installing : • Avoid covering the front of the camera to ensure

the view can be captured completely. One third of the lamp needs be exposed outside of

the fixture to allow enough view and light.• Keep the power of the Device and the Router on in

order to monitor through the use of APP remotely.• Network bandwidth upload speed is 10Mb or

above, to keep the system stability.• Disable Router firewall before use.• Please set the Router to a fixed channel, to

improve Internet stability.

2

仕樣仕樣


V series IP C.M. Lamp

Specification

Polar Diagram Part Number LED Source Input Voltage CCTC.R.I.(RA)

Beam Angle(°)

CBCP Candela

(cd)

Total Pow.+/-10%

Typical Lumens

(lm)

Efficiency(lm/W)

DimmingPower Factor(PF)

BLV8026P25-OVW3602HWF Osram 3030 100~240V 2700K 80 220 155 14 1000lm 73 APP Dimming 0.8

Option 1 : Lamp base: E27 Option 2 : Input Voltage: 100~240VOption 3 : The above CCT. is defined based on ANSI standard. Specific color temperature can be done upon customer request. For instance 2700K could be assigned as 2580~2725K or 2725~2870K, the same can be accomplished for 3500K and 5500K as well but shall be withdifferent price. 2200K is also available upon request.

Genral Specification

Storage Micro-SDXC 64GBRecording time is about 5-10 days (recording time depends on the recording environment)

Network

Interface 802.11b/g/n

Range Up to 10 meters

Wireless Security WPA, WPA2, WPA+WPA2 Password protected access

Video

Compression format H.264

Image sensor HD 1/3" 3M progressive scan CMOS sensor, 2 Megapixel

Board Lens 5M Fisheye

fixed focus Fixed Focal Length 1.0mm/ F2.2

Resolution 1280 X 1024

Max. Frame Max. 30fps at 1280x1024

Maximum FOV (Field of View) 360° panorama : 180°(diagonal)/180°(vertical)/ 180° (horizontal)

Motion Detection Three-zone for detection, sensitivity Adjustable

Sensor/Control

Light Sensor Build-in Ambient Light Sensor

Lighting Control Support APP for Light Control

Audio

Audio Capability Built-in Microphone

Device Specification

3

仕樣

V series IP C.M. LampRev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.tw

IP C.M. Lamp Connection Mode

P2P (peer-to-peer) connection is to exchange information between peers and without the need to go through a middle server.Through this type of connection mode, the device and user can exchange information directly without a middle server to increase security and to ensure the information can be protected.

4Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp

Overview of APP

Connection status

Device Connection

Connect the device to the Router.

Turn off the power before installation, gently twist the devise into the socket and turn on the power.Device will light up within 45 seconds to complete initialization; the devise will flash one time and brightness adjusted to 50% of the total light output and to be ready to use.

ConnectedConnecting

Not connected

Record Options

Default setting in off. Adjust the recording options based on your needs.Video saved in [Record List]

Record type ● Off(Default) ●Fulltime ● Event

Video Overview

Look up the saved video anytimeSearch by date (each video is 5 mins)


Overview of APP

Brightness adjustment

ON/OFF control, 0-100% brightness adjustment.

Viewing angle adjustment

Multiple-Angle

Viewing angle adjustment

Flip vertically360∘

360∘

Fisheye mode

Panorama VR mode

Split mode

Snapshot / on time recording

Instant monitor, snapshot and watch recording.(Files will be saved in your smart device)

Flip

6

Please keep the QR code for future re-configuration

IP C.M. LAMP QRCODE

Place

1111

00123A

Rev:01 2018 B.L.T.C. RESERVES ALL RIGHTS |www.bltc.com.twV series IP C.M. Lamp

Overview of APP

Push Nofications

Sensor light

CM Lamp time setting

When IP C.M. Lamp detects any motion,App will send push notification, user can watch the scene of home immediately.

Under the mode of Sensor Light on (light off and night light off ),when the CM Lamp detcects object,sensor light will be triggered , and light will be turn on, and then light will be turned off automatically after 5 mins.

While CM Lamp connects to internet, video will show the time as user’s locating time zone.

While CM Lamp does not connect to internet,video will follow the time of smart phone.

[setting] -[Unit detail]-[Record type]choose [Event]

Notification function shows SSID

[setting] -[sensor Light Setting] -[ON]


Overview of APP

Video download

Night light setting

Each video is 5 mins, you can download the specific period of r ecording

ClickChoose the video you wantClickIt take 2 mins to download each videoDo not close the APP between While downloadingIt will show " video is saved " after download successful.”

When the light turn off and the Ambient light less than 6lx,Nightlight will turn onautomatic.According to the local time zone at 7:00 AM, the night light will turn off automatically,and will turn on while the ambient light less than 6lux .

2D Drawing

V series IP C.M. Lamp


Product Packing C.M. Lamp

Lamp body material Dimension (mm)- Ø:80mmNet Weight (g):

COVER:PC

CAMERA:Fisheye lens

HEAT SINK:Aluminum

BASE:NPB

Base: E27Net Weight (g): 495

No sealed fixtures Not for outdoor fixtures

Luminaire NoticeThe LED Lamp is not compatible with all luminaires for halogen lamps. Before installation, please read following guidelines:-No sealed fixtures.-Not for outdoor fixtures.-Not for wet environment.

Ø80

142

Step 1 Step 2

Gife Box 1Pc of Lamp Outerior Box 10 gift BoxesDimensions(mm) L: 146*W:85* H:222 Dimensions(mm) L:449*W:240*H:314


Safety Label & Warning• Do not cover lamp with paper, fabric, or any flammable material to avoid burning.• Working Environmental Temperature: -10 ~ +40°• Do not insert metal objects into the gap of lamp base.• The appropriate combination of lamp and lamp base should be carefully selected for different voltage and wattage.• Do not use in high-humidity environment or near water to avoid damage. (Except B.L.T.C. Outdoor IP65 version)• Not suitable for use in automatic light sensor system, emergency lighting fixture and mercury fixture to avoid damage and burning.• Do not use near flammable objects such as gasoline, spray, chemicals, paints, oil…etc.• Do not use in place that is likely to be impacted by force or vibration.• Do not use in acidic environment.• Please turn the light off when installing or cleaning to avoid electrical shock.• Please handle with care to avoid damage and collision.• Do not touch any powered-on lamps or lamps that have just been turned off to avoid burning.• Please ensure the lamp is tightly installed into the socket to avoid dropping.• Please select the appropriate fixture based on lamp size and weight.

General Guideline• Please use power supply 100~240V, Frequency 50/60 Hz for the product.• Slight difference of color temperature and brightness is likely to occur for the same part number due to the difference of LED chips.• Brightness, color temperature, and light distribution may vary with different types of bulbs.• To avoid heat build-up and the shortening of product lifetime, sealed fixture is not recommended.• Keep the lamp away from radio, video and television for a distance of 1 meter to avoid noise caused by interference.• Do not install lamp in heal insulated fixture.• Do not disassemble or reconstruct the lamp.• Do not stare directly at the lamp to avoid eye injury.• The light distribution may vary with different type of fixtures.• Do not wash the lamp with water.• Do not use the lamp outdoor if it is not marked as IP65.• To avoid damage and poor insulation, do not use the lamp near water or in frosted environment if it is not marked as IP65.• For lamps with a weight significantly higher than that of the lamps for which they are a replacement, attention should be drawn to

the fact that the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.

h h 2ç ñ P IP C.M. Lamp A25 - BLTC

Documents

Transcript of h h 2ç ñ P IP C.M. Lamp A25 - BLTC