G.W.Emrich 2008 06 What has been changed... All models have a built-in waveform monitor 4 screen...
-
Upload
joanna-moody -
Category
Documents
-
view
214 -
download
0
Transcript of G.W.Emrich 2008 06 What has been changed... All models have a built-in waveform monitor 4 screen...
G.W.Emrich 2008 06
What has been changed ... All models have a built-in waveform monitor
4 screen positions selectable Filter Mode (Flat/Low pass) Gain adjustable High gain warning (2 colour section) Gain adjust for high level
Low latency mode switchable (< 1 Frame) To come closer to „lip-sync“ issues, by
holding image processing quality
4:3 SD Vertical full screen mode Special set-up for SD-Users to use the max.
resolution of the native panel
Additional marker features Center Marker Frame on/off More safety marker line-outs
New Colour Calibration Tool Version 1.04
Standard Image Full Size Image
G.W.Emrich 2008 06
●Summary of Function・Display only brightness signal (Y signal) from input signal.
*SYNC function is not available.
・Supported input signal for WFM ; Video/Component (w/o RGB)/SDI/ DVI input
*Go to other sheet for detail of compatible input signals.
・Detect only from V cycle.(Won't detect by line select)・Cannot display trace of brightness changing points.
・Able to select ON/OFF from front control button.
・Color of Wave form : White (Over Peak -Red)
・Ruled line from range of 0% to 100% and step by 20%. (Min:-7% , Max 109%)
DT-V**L3D Introduction of Wave Form Monitor Function
G.W.Emrich 2008 06
●Details of Function (Function on Menu)
Menu Detail of function Comment
1 POSITION Select position. Able to select from 4 positions.
2 FILTER Low pass filter function ON(LOWPASS)/OFF(FLAT) Able to reduce noises in signal.
3 GAIN Set GAIN level of wave form data
Correct signal level if signal level is lost in cable.
(Spread or reduce the displayed wave form vertically.)
OVER LEVEL Setting the peak level of brightness signal
・MARKINGSelect ON/OFF of red color when input signal is over the peak from which has setted.
・LEVEL Set minimum value of peak levelColor over peak portion of the wave in red if setted.
・AUTO OFF Auto off setting of wave form monitor by ON/OFFON : Auto off after 15minutesOFF : Keep wave form displayed
4
G.W.Emrich 2008 06
Signal Name Format WFM
60Hz(59.94Hz)
NTSC, BW/60 480/60i Yes
50Hz PAL, BW/50 576/50i Yes
480/60i 480/60i Yes
576/50i 576/50i Yes
480/60p 480/60p Yes
576/50p 576/60p Yes
720/60p 720/60p Yes
720/50p 720/50p Yes
720/30p 720/30p Yes
720/25p 720/25p Yes
720/24p 720/24p Yes
1035/60i 1035/60i Yes
1080/60i 1080/60i Yes
1080/50i 1080/50i Yes
1080/60p 1080/60p No
1080/50p 1080/50p No
1080/30p 1080/30p Yes
1080/25p 1080/25p Yes
1080/24p 1080/24p Yes
1080/30psF 1080/30psF Yes
1080/24psF 1080/24psF Yes
480/60i 480/60i No
576/50i 576/50i No
480/60p 480/60p No
576/50p 576/60p No
720/60p 720/60p No
720/50p 720/50p No
720/30p 720/30p No
720/25p 720/25p No
720/24p 720/24p No
1035/60i 1035/60i No
1080/60i 1080/60i No
1080/50i 1080/50i No
1080/60p 1080/60p No
1080/50p 1080/50p No
1080/30p 1080/30p No
1080/25p 1080/25p No
1080/24p 1080/24p No
1080/30psF 1080/30psF No
1080/24psF 1080/24psF No
YPbPr4:2:2
TypeA
NA
LO
G
COMPOSITEY /C
SD
HD
AN
AL
OG
RGB4:4:4
SD
HD
Signal Name Format WFM
480/60i 480/60i DVI: No SDI:Yes
576/50i 576/50i DVI:No SDI:Yes
480/60i-double 480/60i DVI:Yes SDI:No
576/50i-double 576/50i DVI:Yes SDI:No
480/60p 480/60p Yes
576/50p 576/50p Yes
640*480/60p 640*480@60Hz No
720/60p 720/60p Yes
720/50p 720/50p Yes
720/30p 720/30p Yes
720/25p 720/25p Yes
720/24p 720/24p Yes
1035/60i 1035/60i Yes
1080/60i 1080/60i Yes
1080/50i 1080/50i Yes
1080/60p 1080/60p No
1080/50p 1080/50p No
1080/30p 1080/30p Yes
1080/25p 1080/25p Yes
1080/24p 1080/24p Yes
1080/30psF 1080/30psF Yes
1080/24psF 1080/24psF Yes
480/60i 480/60i No
576/50i 576/50i No
480/60i-double 480/60i No
576/50i-double 576/50i No
480/60p 480/60p No
576/50p 576/50p No
640*480/60p 640*480@60Hz No
720/60p 720/60p No
720/50p 720/50p No
720/30p 720/30p No
720/25p 720/25p No
720/24p 720/24p No
1035/60i 1035/60i No
1080/60i 1080/60i No
1080/50i 1080/50i No
1080/60p 1080/60p No
1080/50p 1080/50p No
1080/30p 1080/30p No
1080/25p 1080/25p No
1080/24p 1080/24p No
DIG
ITA
L
Type
SD
(SDI,DVI)
HD
(SDI,DVI)
RGB4:4:4
SD
(SDI,DVI)
HD
(SDI,DVI)
YPbPr4:2:24:4:4
720/60p 720/60p No
1080/60p 1080/60p No
VGA/60 640*480@60Hz No
WideVGA/60 852*480@60Hz No
SVGA/60 800*600@60Hz No
XGA/60 1024*768@60Hz No
WideXGA/60(1280)1280*768@60Hz No
WXGA+/60 1440*900@60Hz No
SXGA/60 1280*1024@60Hz No
SXGA+/60-A 1400*1050@60Hz No
SXGA+/60-B 1400*1050@60Hz No
WSXGA+/60 1680*1050@60Hz No
UXGA/60 1600*1200@60Hz No
WUXGA/60 1920*1200@60Hz No
MAC13/66 640*480@66Hz No
MAC16 832*624 No
MAC19 1024*768 No
MAC21 1152*870 No
PC(DVI)
DIG
ITA
L
RGB4:4:4
G.W.Emrich 2008 06
Evolution of Feature: MARKER function
Improve convenient of Marker function to fill up some kind of Marker and Setting menu.
1 Type of SAFETY MARKER filled up
2 Border Line
3 Showing center position
4Selectable brightness of indication and depth of Half tone
A example of various combination;pattern of 16:9 picture, 4:3 AREA MARKER, andSAFETY MARKER of 90% shadow
Like a UNDER SCAN (Tele-frame) indication available, as a combination
FRAME:Border line, divided blank area and dark picture
CENTER MARKER:Marker shown center position is able to beindicate.
BRIGHTNESS:Selectable HIGH / LOW of brightness adjust surroundings.
HALF TONE LEVEL:Selectable depth of half tone from 50% / 25% / 12.5%.
G.W.Emrich 2008 06
Hidden Function: 4:3 SIZE
Concept Expand 4:3 picture to Full size (especially effective for Studio Monitor Wall)
Use condition-Become to be selectable in OSD menu - Various information is overlapped on picture ( Available indication OFF )- 17, 20, 24inch
Standard Image Full Size Image by service menu
Maximum indication to keep blank area Maximum indication to use height