Gutmann Curtain Wall Systems f50 Plus f60 Plus En
-
Upload
nacer-izri -
Category
Documents
-
view
168 -
download
14
Transcript of Gutmann Curtain Wall Systems f50 Plus f60 Plus En
![Page 1: Gutmann Curtain Wall Systems f50 Plus f60 Plus En](https://reader035.fdocuments.us/reader035/viewer/2022071700/55cf9c9c550346d033aa6b6b/html5/thumbnails/1.jpg)
4342
Curtain Wall SystemsGUT�ANN F50+ | F60+
GUTMANN F50+ | F60+
Curtain Wall SystemsGUT�ANN F50+ | F60+
• System Description
Standard curtain wall system with 50 or 60 mm face width→ Ucw values 0.76 to1.8 W/m2K in accordance with DIN EN ISO 10077-2 standard→ Identical profiles for mullion and transom, straight cutting, no transom profile notching: minimal
off-cuts, rational manufacture and installation→ Patented joint connector technology for gap-free connection between transom and mullion → Identical widths of inner glass gaskets at mullions and transoms → Low edge radius for visually flawless transom connection→ Version with Structural Glazing (SG), semi-SG and as visual SG variant→ Maximum glass loads up to 600 kg, depending on wind loads→ Glass thickness up to 52 mm
• System Cross Section
• System Properties of Classes
Water tightness RE 1500 2.0 kN/m2 3.0 kN/m2Wind load
Air permeability AE E 5/I 5Operating forces
• Thermal Insulation
1 Psi value of glass edge seal: Thermix TX.N 0.070 W/mK; Ug value: 1.0 W/m²K; Element size: 1230 x 1480 mm2 Psi value of glass edge seal: Swisspacer V 0.055 W/mK; Ug value: 0.6 W/m²K; Element size: 1230 x 1480 mm
PB 1083668; Element size: 3,498 x 3,099 mm
Um,t
Ucw double1
Ucw triple2
1.2
0.80
1.5