GUJARAT WATER SUPPLY SEWERAGE BOARD PSUs as …GUJARAT WATER SUPPLY & SEWERAGE BOARD Govt. PSUs as...
Transcript of GUJARAT WATER SUPPLY SEWERAGE BOARD PSUs as …GUJARAT WATER SUPPLY & SEWERAGE BOARD Govt. PSUs as...
GUJARAT WATER SUPPLY & SEWERAGE BOARD
Govt. PSUs as Approved Vendors of GWSSB for Civil Materials
All the products (related to water supply & Sewerage schemes) manufactured by Government PSUs shall be accepted as Approved Vendors.
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
PE- 80 up to 315 mm up to PN -10
PE-100 up to 315 mm up to PN -10
90 to 315 mm & 355 to 1000 mm
PN - 2.5
50 to 315 mm & 355 to 1000 mm
PN - 4
40 to 315 mm & 355 to 1000 mm
PN - 6
32 to 110 mm & 125 to 180 mm &
200 to 710 mmPN -8
32 to 110 mm & 125 to 315 mm &
355 to 630 mmPN -10
25 to 110 mm & 200 to 315 mm
PN -12.5
20 to 110 mm PN - 1650 to 315 mm & 355 to 1000 mm
PN - 6
40 to 180 mm & 200 to 900 mm
PN -8
32 to 315 mm & 355 to 800 mm
PN -10
25 to 110 mm & 200 to 315 mm
PN -12.5
20 to 110 mm PN - 16
90 to 1000 mm PN - 2.550 to 1000 mm PN - 432 to 1000 mm PN - 632 to 180 mm PN -820 to 450 mm PN -1020 to 180 mm PN -12.5
50 to 1000 mm PN - 640 to 315 mm PN -8
32 to 500 mm & 800 mm
PN -10
20 to 180 mm & 200 to 500 mm
PN - 16
PE-80 20 to 400 mmPN - 2.5 to PN
16
PE-100 20 to 400 mmPN - 6 to
PN 16
4M/s. Reliance Industries
Ltd., Hazira
Reliance Industries Ltd, Relpipe Plant, Village-Mora, Post-Bhatha, Hazira,
1/31/2019(5 yrs
Approval over)
3
M/s. Parixit Irrigation Limited, Sanand
(Formerly known as M/s. Emtelle India Limited,
Sanand)
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand,
Ahmedabad - 382 [email protected]
PE-80
1/31/2019(5 yrs
Approval over)
Name changed
vide letter no. 369
dtd.30-8-2018
PE-100
B-494, RICCO Industrial Area, Bhiwadi, Dist. Alwar, Rajasthan-301019
PE-80
1/31/2019(5 yrs
Approval over)
PE-100
1M/s. Aerochem Piping Pvt. Ltd., Ahmedabad
Plot No. 258, Road No. 1/B, Phase-I, Kathwada, GIDC, Ahmedabad-382430
[email protected]@parthvalves.com
1/31/2019(5 yrs
Approval over)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of HDPE (PE-80 & 100) Pipes (IS-4984) with ISI mark as per
Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
2M/s. Purma Plast Pvt.
Ltd., Bhiwadi
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16
50 to 1000 mm PN - 640 to 800 mm PN -832 to 800 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 110 mm PN -12.590 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 180 mm PN -12.520 to 180 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 180 mm PN -12.520 to 180 mm PN - 16
90 to 1000 mm PN - 2.550 to 1000 mm PN - 440 to 1000 mm PN - 632 to 710 mm PN -825 to 630 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 16
50 to 1000 mm PN - 640 to 900 mm PN -832 to 800 mm PN -1025 to 630 mm PN -12.520 to 500 mm PN - 16
PE- 80 40 to 140 mm PN - 6PE-100 50 to 180 mm PN - 6PE-100 32 to 160 mm PN -10
9M/s. Mayfair Polymers Pvt. Ltd., Himmatnagar
Mayfair Compound, N.H.No.8, Himmatnagar - 383 001
12/31/2019(Renewed for 2 yrs)
-
PE-100
7M/s kelvin Plastics Private Ltd.,Rajkot
Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27
(Old-8B), Bhunava, Gondal, Rajkot-360311
PE-801/31/2019
(5 yrs Approval
over)
PE-100
8M/s. Jain Irrigation
Systems Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,
PE-801/31/2019
(5 yrs Approval
over)
6M/s Krishna Plastics,
Rajkot
Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,
[email protected][email protected]
PE-801/31/2019
(5 yrs Approval
over)PE-100
PE-100
5M/s Time technoplast
Ltd. Silvasa
Survey No. 326/1/1 (Part) & 328, Unit-2, Dhodharoada, Village-Velugam,
Silavassa- U.T. of D & N. H. -396230
PE-801/31/2019
(5 yrs Approval
over)
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 315 mm (Except 125 mm)
PN - 2.5
50 to 315 mm (Except 125 mm)
PN - 4
40 to 315 mm (Except 125 mm)
PN - 6
32 to 315 mm (Except 125 mm)
PN -8
25 to 315 mm (Except 125 mm)
PN -10
50 to 315 mm (Except 125 mm)
PN - 6
40 to 315 mm (Except 125 mm)
PN -8
32 to 315 mm (Except 125 mm)
PN -10
200 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1032 to 355 mm PN -12.532 to 355 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1020 to 180 mm PN -12.5
110 to 180 mm PN - 1650 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -1025 to 250 mm PN -12.5110 to 180 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 500 mm PN - 640 to 315 mm PN -825 to 315 mm PN -1025 to 200 mm PN -12.550 to 630 mm PN - 640 to 315 mm PN -832 to 630 mm PN -1025 to 200 mm PN -12.5
125 to 200 mm PN - 2.5125 to 200 mm PN - 440 to 200 mm PN - 632 to 200 mm PN -825 to 200 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 200 mm PN - 640 to 200 mm PN -832 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16
-
PE-100
14M/s. Dolphin Poly Plast
pvt. Ltd., Rajkot
Plot No. G/1/C, Near Gate no. 2, Ta:- Lodhika, GIDC Metoda, Rajkot-360021
[email protected]@dolphinpipe.com
PE- 80
12/31/2019(Renewed for 2 yrs)
-
PE-100
13M/s. Dutron Polymers
Ltd., Kheda
Bolck No. 642, N.H. 8, At-Hariyala, Kheda
PE-8012/31/2019(Renewed for 2 yrs)
-
PE-100
12M/s. Kisan Moulding Ltd.,
Silavasa
108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli,
[email protected]@kisangroup.com
PE-80
12/31/2019(Renewed for 2 yrs)
-
PE-100
11M/s. Nimbus Pipes Ltd.,
Jaipur
SP2-123/123A, RIICO Industrial Area, Manda Near Kaladera, Chomu, Jaipur-
302023, [email protected]
PE-80
12/31/2019(Renewed for 2 yrs)
-
PE-100
10M/s. Kothari Agritech Pvt.
Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-
413 213, [email protected]@kotharipipes.co.in
PE-80
12/31/2019(Renewed for 2 yrs)
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 140 mm & 160 to 400 mm
PN - 2.5
50 to 140 mm & 160 to 400 mm
PN - 4
40 to 400 mm PN - 632 to 400 mm PN -825 to 400 mm PN -1020 to 200 mm PN -12.520 to 200 mm PN - 1650 to 400 mm PN - 640 to 400 mm PN -832 to 400 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 1690 to 250 mm PN - 2.550 to 250 mm PN - 440 to 250 mm PN - 632 to 250 mm PN -825 to 250 mm PN -1050 to 250 mm PN - 640 to 250 mm PN -832 to 250 mm PN -10
500, 630 & 710 mm
PN - 2.5
50 to 110 mm, 355 to 400 mm, 500, 630 & 710
mm
PN - 4
40 to 400 mm, 450, 500, 630 &
710 mm PN - 6
32 to 110 mm, 355 to 400 mm, 450, 500, & 630
mm
PN -8
25, 32 to 200 mm (Except 125 mm), 450, 500, & 630
mm
PN -10
20 to 180 mm PN -12.550 to 500 mm &
630, 710 mmPN - 6
40 to 500 mm & 630, 710 mm
PN -8
32 to 500 mm & 630, 710 mm
PN -10
25 to 400 mm PN -12.5
-
PE-100
17M/s. Kriti Industries (India) Ltd., Indore
13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP
PE- 80
12/31/2019(Renewed for 2 yrs)
-
PE-100
16M/s. Meghdoot Polypipes, Jaipur
G-1-198, Road No. 10, Bindayaka Industrial Area, Phase-II, Jaipur-302012
PE- 8012/31/2019(Renewed for 2 yrs)
15M/s. Kisan Irrigation &
Infrastructure ltd., Mumbai
Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 [email protected]
[email protected]@kisanirrigation.com
PE- 80
12/31/2019(Renewed for 2 yrs)
-
PE-100
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 450 mm PN - 2.550 to 450 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 450 mm PN -12.520 to 450 mm PN - 1690 to 630 mm PN - 2.550 to 630 mm PN - 440 to 630 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 400 mm PN -12.520 to 315 mm PN - 1650 to 630 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 400 mm PN -12.520 to 315 mm PN - 1640 to 315 mm PN - 6
125 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -1050 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1090 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1063 to 110 mm PN - 2.563 to 110 mm PN - 463 to 125 mm PN - 6
125 mm PN -8125 mm PN -10
20 to 125 mm PN -12.520 to 125 mm PN - 1663 to 125 mm PN - 6
125 mm PN -8125 mm PN -10
20 to 125 mm PN -12.520 to 125 mm PN - 16
22M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar
Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,
Talod, [email protected]
PE-8031/12/2020(Renewed for 2 yrs)
-
PE-100
23M/s. Vishakha Irrigation
Pvt. Ltd., Ahmedabad
Block No. 792, Nr. Monik Ind. Sadaspur Road, Village:- Moti Bhoyan, Kalol,
PE-80
31/12/2018 -
PE-100
20M/s. Elegant Polymers,
Rajkot
Elegant Polymers, At-Navagam (Bamanbore), Taluka:- Chotila,
PE- 8031/12/2020(Renewed for 2 yrs)
-
PE-100
21M/s. Signet Industries
Ltd., Dhar (MP)
Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar,
Madhya [email protected]
PE-8031/12/2020(Renewed for 2 yrs)
-
PE-100
19M/s. Noble Polymers,
Silvassa
Sr. No. 132/1/1/4, 96/2/2 & 95/1/2, B/H. Prince Pipes, Village :- Athal,
Silvassa-396230, UT of Dadra & Nagar Haveli.
PE-80
12/31/2019(Renewed for 2 yrs)
DELETED
PE -100
18M/s. Rungta Irrigation
Ltd., Ghaziabad
C-165, Bulandshahar Road, Industrial Area, Ghaziabad (U.P.)
[email protected]@rungtairrigation.in
PE-80
31-12-2017
-
PE-100
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 180 mm PN - 2.550 to 180 mm PN - 440 to 180 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 180 mm PN -12.550 to 180 mm PN - 640 to 180 mm PN -832 to 180 mm PN -1025 to 180 mm PN -12.540 to 315 mm PN - 632 to 315 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN -1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10
125 to 315 mm PN - 2.5125 to 315 mm PN - 6125 to 315 mm PN -8125 to 315 mm PN -1020 to 315 mm PN -12.520 to 315 mm PN -16200 to 315 mm PN - 6200 to 315 mm PN -8200 to 315 mm PN -10125 to 315 mm PN -12.520 to 315 mm PN -1690 to 400 mm PN - 2.550 to 315 mm PN - 440 to 400 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 400 mm PN - 640 to 315 mm PN -832 to 315 mm PN -10
125 to 450 mm PN - 2.550 to 450 mm PN - 440 to 630 mm PN - 632 to 630 mm PN -825 to 630 mm PN -1020 to 450 mm PN -12.520 to 400 mm PN - 1650 to 630 mm PN - 640 to 630 mm PN -832 to 630 mm PN -1025 to 450 mm PN -12.520 to 400 mm PN - 1690 to 180 mm PN - 2.540 to 180 mm PN - 432 to 180 mm PN - 632 to 180 mm PN -832 to 180 mm PN -10
50 to 110 mm & 200 to 400 mm
PN - 6
40 to 110 mm & 200 to 400 mm
PN -8
32 to 110 mm & 200 to 400 mm
PN -10
20 to 50 mm PN -12.520 to 50 mm PN - 16
30/11/2019(Approval for
3 years)
30/11/2019(Approval for
3 years)
27M/s. Jet Fibre India Pvt.
Ltd., Ahmedabad
Shed No. 658, Suvey No. 909/1 & 2, Pursottam farm, (Bhudarpura) Mahij,
Kheda-387 [email protected],[email protected]
PE-8030/11/2019
(Approval for 3 years)
PE-100
PE-80
M/s. Kataria Plastics Pvt. Ltd., Ratlam
28
PE-80
PE-100
29M/s. Miraj Pipes &
Fittings Pvt. Ltd., Udaipur
Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan
26M/s Krishna Plastics,
Rajkot
Plot no. G-926, GIDC Lodhika, Kishan Gate, Kalawad Road, At. Metoda,
[email protected][email protected]
PE-80
30/06/2019(Approval for
3 years)-
PE-100
30/06/2019(Approval for
3 years)
30/06/2019(Approval for
3 years)
-
-
PE-100
PE-80 Survey no.3, Plot no. 76-79, B/h Kisan Dhydration, NH-27, Village-Bhojpara,
Taluka- Gondal, [email protected]
M/s. Capital Polyplast (Guj.) Pvt. Ltd., Rajkot
24
PE-80
PE-100
Plot no. G-922, Lodhika GIDC, Gate no.3, Kishan Gate Main Road, Kalavad
Road, Metoda, Rajkot-360 021
M/s. Khyati Polymers, Rajkot
25
PE-100
39-44 A, Industrial Area, Ratlam-457001, Madhya [email protected]
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
90 to 315 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 632 to 315 mm PN -825 to 315 mm PN -1050 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1090 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 400 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 500 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 180 mm PN - 2.550 to 315 mm PN - 440 to 315 mm PN - 6
125 to 200 mm PN -8125 to 200 mm PN -10125 to 200 mm PN -12.5125 to 200 mm PN - 1650 to 315 mm PN - 6
125 to 200 mm PN -8125 to 200 mm PN -1025 to 200 mm PN -12.520 to 200 mm PN - 16
PE-80
PE-100
30/06/2020(Approval for
3 years)
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331
M/s. Texmo Pipes & Products Ltd., Burhanpur
(MP)34
PE-100
30/06/2020(Approval for
3 years)
SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., Jaipur-302022
[email protected]@tijaria-pipes.com
M/s. Tijaria Polypipes Limited, Jaipur
32
33M/s. Sagar Polytechnik
Ltd., Chotila (Surendranagar)
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,
PE-80
PE-100
30/06/2020(Approval for
3 years)
PE-100
PE-80
30/06/2020(Approval for
3 years)31
M/s. Dinesh Irrigation Pvt. Ltd., Jaipur
86B & 86B-II, Jhotwara Industrial Area, Jaipur-302012
[email protected]@dineshirrigation.com
PE-80
PE-8030/11/2019
(Approval for 3 years)
PE-100
30M/s. Mohit Polytech Pvt.
Ltd., Jaipur
F-139, Road no. 6, RIICO Industrial Area, Bindayaka, [email protected]@[email protected]
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
125 to 180 mm PN - 2.540 to 110 mm PN - 632 to 180 mm PN -825 to 110 mm PN -1020 to 110 mm PN -12.5
125 to 180 mm PN - 640 to 180 mm PN -832 to 110 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 1690 to 500 mm PN - 2.550 to 500 mm PN - 440 to 500 mm PN - 632 to 500 mm PN -825 to 500 mm PN -1020 to 500 mm PN -12.520 to 450 mm PN - 1650 to 500 mm PN - 640 to 500 mm PN -832 to 500 mm PN -1025 to 500 mm PN -12.520 to 500 mm PN - 1690 to 800 mm PN - 2.550 to 800 mm PN - 440 to 800 mm PN - 6
32 to 500 mm & 630 mm
PN -8
25 to 500 mm PN -1020 to 315 mm PN -12.550 to 800 mm PN - 640 to 800 mm PN -8
32 to 500 mm, 630 mm & 710
mmPN -10
25 to 315 mm PN -12.520 to 315 mm PN - 16
110 mm PN - 2.5110 mm PN - 4
40 to 110 mm PN - 632 to 110 mm PN -825 to 110 mm PN -1050 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1090 to 315 mm PN - 2.550 to 315 mm PN - 440 to 450 mm PN - 632 to 450 mm PN -825 to 450 mm PN -1020 to 250 mm PN -12.520 to 250 mm PN - 1650 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1025 to 250 mm PN -12.520 to 250 mm PN - 16
PE-80
PE-100
R.S. No. 13/2P1, Plot no. 4, NH 27, Opp. Sadak Pipaliya Gate, Village:- Sadak Pipaliya, Ta. Gondal, [email protected]
M/s. Balson Polyplast Pvt. Ltd., Rajkot
3506/03/2021
(Approval for 3 years)
39
M/s. Tufropes Private Limited, Silvassa
(Formerly known as M/s. Polysil Irrigation Systems
Pvt. Ltd., Silvassa)
Survey No. 137/1, Madhuban Road, Village:- Karad, Silvassa-396 230,
[email protected][email protected]
PE-80
06/03/2021(Approval for
3 years)
Name chanded vide letter no.89
dtd.7-3-2019
PE-100
06/03/2021(Approval for
3 years)
PE-80
PE-100
Survey no. 146/P2, Behind Raymond Ltd., At & Po. Motiwada, Taluka:-
Killapardi, District:- Valsad -396125, Gujarat
[email protected]@sangir.in
M/s. Sangir Plastics Pvt. Ltd., Valsad
37
PE-80
PE-100
UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli,
M/s. Parvati Agro Plast, Sangli (Maharashtra)
3606/03/2021
(Approval for 3 years)
PE-8006/03/2021
(Approval for 3 years)
PE-100
38M/s. Duke Pipes Pvt. Ltd.,
Palanpur
Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,
[email protected]@dukepipes.com
Material Grade
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Date
Remarks
40 to 315 mm PN - 632 to 180 mm PN -825 to 180 mm PN -1020 to 110 mm PN -12.520 to 110 mm PN - 1650 to 315 mm PN - 640 to 315 mm PN -832 to 315 mm PN -1025 to 110 mm PN -12.520 to 110 mm PN - 1690 to 450 mm PN - 2.550 to 450 mm PN - 440 to 200 mm PN - 632 to 450 mm PN -832 to 450 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16
50 to 450 mm PN - 640 to 450 mm PN -832 to 450 mm PN -1032 to 90 mm PN -12.550 to 90 mm PN - 16
90 to 110 mm PN - 2.550 to 110 mm PN - 440 to 110 mm PN - 632 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 1650 to 110 mm PN - 640 to 110 mm PN -832 to 110 mm PN -1032 to 110 mm PN -12.532 to 110 mm PN - 16
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
PE-80
06/03/2021(Approval for
3 years)
PE-100
40M/s. Sarovar Polymers
Pvt. Ltd., Rajkot
27/28, Atul Industrial Estate, Opp. Jyoti CNC & Pathak School, B/h. Akshar
Weight Bridge, Kalawad Road, Metoda GIDC, Rajkot-360021
PE-80
PE-100
Survey No. 156/157. Ribda Lodhika Road, Near Makhawad Chokdi,
Makhavad, [email protected]
M/s. Nataraj Polyplast Pvt. Ltd., Rajkot
4111/02/2022
(Approval for 3 years)
PE-80
PE-100
11/02/2022(Approval for
3 years)
Near Murakhda's Patiya, At- Murakhda, Tal.:- Upleta, Rajkot
M/s. Shrinathji Polyplast, Rajkot
42
Size (mm) Class1 2 3 5 6 7 8
75 to 500 mm SN : 4 & 8
600 to 1000 mm SN: 2, 4, 6 & 8
2M/s. Prince Pipes &
Fittings Ltd., Haridwar (Uttarakhand)
Khasra No. 1548/49- 4 & 5, Salempur. Mehdood, 2, Bahadrabad, Haridwar-
249 402, Uttarakhand
75 to 500 mm(Except 225 mm)
SN : 4 & 811/02/2022
(Approval for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1M/s. Alom Poly
Extrusions Ltd., Kolkata
Banganagar, Falta, 24 Parganas (South), West Bengal
[email protected]@alom.in
30/06/2020(Approval for
3 years)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of DWC (HDPE) Pipes (IS-16098 Part -2) with ISI mark as per
Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)Sr. No.
Name of Agency Adress/E-mail AddressApproved Sizes & Class Approval
Valid up to Remarks
Size (mm) Class1 2 3 4 5 6 7
63 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 110 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm263 to 110 mm Class II- 4.0 kg/cm263 to 250 mm Class III- 6.0 kg/cm263 to 250 mm Class IV- 8.0 kg/cm263 to 250 mm Class V- 10.0 kg/cm2
3
M/s. Emtelle India Limited, Sanand (Formerly known as M/s. Parixit Industries LTd.,
Sanand)
Survey NO. 214/1, 214/2, Virpura Bus Stop, P.O.Iyava, Ta. Sanand, Ahmedabad - 382 [email protected]
63 to 315 mm Class III- 6.0 kg/cm2
31/01/2019(5 yrs
Approval over)
Name changed
vide letter no. 28
dtd.12-2-2016
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
25 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 200 mm Class II- 4.0 kg/cm2
40 to 200 mm Class III- 6.0 kg/cm2
6M/s. Jain Irrigation Systems
Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001, Maharastra
[email protected]@jains.com
63 to 630 mm Class II to VI
( 4.0 to 12.5 kg/cm2)
31/01/2019(5 yrs
Approval over)
90 to 250 mm (Except 125 mm)
Class II- 4.0 kg/cm2
63 to 315 mm (Except 280 mm)
Class III- 6.0 kg/cm2
90 to 250 mm (Except 125 mm)
Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
32 to 315 mm Class V- 10.0 kg/cm2
M/s. The Supreme Industries Ltd., Jalgaon
4 M/s. Polysil Pipes, Silvassa
Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D & N.H.
[email protected]@tufropes.com
[email protected][email protected]
31/01/2019(5 yrs
Approval over)
2M/s. Super Industrial Corp.,
PatialaC-67, Focal Point, Patiala-147004
31/01/2019(5 yrs
Approval over)
5 M/s Sumo Polyplast Pvt.Ltd.Plot no. G-925, GIDC Lodhika, Kishan Gate,
Kalawad Road, At. Metoda, [email protected]
31/01/2019(5 yrs
Approval over)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Ringfit UPVC Pipes (IS-4985) with ISI mark as per Vendor Selection
Report submitted by Different TPI (As on dt. 15-5-2019)Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
1The supreme Industries Ltd.,
At: Gadegaon, PO: Neri. Dist: [email protected]
31/01/2019(5 yrs
Approval over)
7M/s. Mayfair Polymers Pvt.
Ltd., Himmatnagar
Mayfair Compound, N.H.No.8, Himmatnagar - 383 001
[email protected]@gmail.com
31/12/2019(Renewed for 2 yrs)
-
8M/s. Kisan Moulding Ltd.,
Silavasa
108/1/6, Surangi Road, Opp. Khadoli Power House sub station, Khadoli, Silvassa-396230
[email protected]@gmail.com
31/12/2019(Renewed for 2 yrs)
-
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
9M/s. Dutron Polymers Ltd.,
KhedaBolck No. 642, N.H. 8, At-Hariyala, Kheda
[email protected] to 315 mm Class III- 6.0 kg/cm2
31/12/2019(Renewed for 2 yrs)
-
90 to 315 mm (Except 125 mm)
Class I- 2.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm2
25 to 315 mm (Except 125 mm)
Class IV- 8.0 kg/cm2
20 to 315 mm (Except 125 mm)
Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
25 to 315 mm Class IV- 8.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2140 to 315 mm Class VI- 12.5 kg/cm2
13M/s. AKG Extrusion Pvt. Ltd.,
NoidaB-39, Sector-80, Noida, Uttar Pradesh-201305
[email protected] to 315 mm Class III- 6.0 kg/cm2 31-12-2017 DELETED
14M/s. Stuti Pipes Pvt. Ltd.,
Sabarkantha
Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:- Sabarkantha-
63 to 200 mm (Except 125 mm)
Class III- 6.0 kg/cm231/12/2020(Renewed for 2 yrs)
-
63 to 200 mm Class II- 4.0 kg/cm2
63 to 200 mm Class III- 6.0 kg/cm2
63 to 200 mm Class IV- 8.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class II- 4.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class III- 6.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class V- 10.0 kg/cm2
16M/s. Vinayak Polypipes Pvt.
Ltd., Himmatnagar
Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol, Talod, Sabarkantha
31/12/2020(Renewed for 2 yrs)
-
12M/s. Kriti Industries (India)
Ltd., Indore
13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, [email protected]
31/12/2019(Renewed for 2 yrs)
-
10M/s. Kothari Agritech Pvt.
Ltd., Solapur
Plot no. 185 to 193, Chandramauli industrial co-op estate, Mohol, Solapur-413 213,
[email protected]@kotharipipes.co.in
31/12/2019(Renewed for 2 yrs)
-
11M/s. Kisan Irrigation &
Infrastructure ltd., Mumbai
Unit -2 , Plot No. 91-110, Sector -3, Pithampur, Dist- Dhar (MP)-454 775
[email protected][email protected]
31/12/2019(Renewed for 2 yrs)
-
15M/s. Signet Industries Ltd.,
Dhar (MP)
Plot no. 462-465 & 476-478, Sector-3, Industrial Area, Pithampur, Dhar, Madhya
31/12/2020(Renewed for 2 yrs)
-
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
17M/s. Swastik Krushi Polypipes Pvt. LTD.,
Dahegam
Plot No. 314, Zak Industrial Area, Vahelal Road, Village- Zak, Post- Paradhol, Dahegam,
[email protected]@swastikkrushi.com
63 to 160 mm (Except 125 mm)
Class III- 6.0 kg/cm231/12/2020(Renewed for 2 yrs)
-
110 to 250 mm (Except 125 mm)
Class III- 6.0 kg/cm2
110 to 250 mm (Except 125 mm)
Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm240 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
20 to 315 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
90 to 315 mm Class I- 2.5 kg/cm2125 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm2
125 to 180 mm Class IV- 8.0 kg/cm290 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm225 to 315 mm Class IV- 8.0 kg/cm220 to 315 mm Class V- 10.0 kg/cm2
75 to 315 mm Class II- 4.0 kg/cm2
75 to 315 mm Class III- 6.0 kg/cm2
125 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 280 mm Class V- 10.0 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
27M/s. Prince Pipes & Fittings
Pvt. Ltd., Dadra & Nagar Haveli
Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D & N.H. -
396 [email protected]@[email protected]
30/06/2020(Approval
for 3 years)
30/06/2020(Approval
for 3 years)28
M/s. Elegant Polymers, Rajkot
6, Rajputpara, Lohana Boarding, Rajkot-360 001
[email protected]@gmail.com
N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat
30/06/2020(Approval
for 3 years)
30/06/2020(Approval
for 3 years)
Rajkot Ahmedabad N.H. No. 8-B, Wankaner Chowkdi, Survey no.552, Opp. Kuvadava High
School, Kuvadava, Rajkot-360 [email protected]
M/s. Idol Plasto Pvt. Ltd., Rajkot
25
30/06/2020(Approval
for 3 years)26 M/s. Kamdhenu Pipe, Rajkot
Near Murakhda's Patiya, At- Murakhda, Taluka:- Upleta, Rajkot
[email protected]@kamdhenupipe.com
30/06/2019(Approval
for 3 years)-
Survey No.149/1, Dholka-Kheda Road, Opp. GIDC Estate, Dholka-382225, Dist. Ahmedabad
[email protected]@astralcpvc.com
M/s. Astral Polytechnik Ltd., Ahmedabad
18
19M/s. Godavari Pipes Pvt.
Ltd., Rajkot
Survey No. 26 & 27, Plot no.6 To 10, N.H.8-B, Shapar (Veraval), Dist. Rajkot.
30/06/2019(Approval
for 3 years)-
30/11/2019(Approval
for 3 years)23
M/s. Borana Industries, Jodhpur
E-39, M.I.A. Basni 2nd Phase, Jodhpur, Rajasthan
30/11/2019(Approval
for 3 years)
24M/s. Duke Plasto Tech.Pvt.
Ltd., Palanpur
22
21M/s. Kataria Plastics Pvt.
Ltd., Ratlam
39-44 A, Industrial Area, Ratlam-457001, Madhya Pradesh
30/11/2019(Approval
for 3 years)
M/s. Miraj Pipes & Fittings Pvt. Ltd., Udaipur
Opp. Gangotri, Badi Thur Road, Feniyon ka Guda, Udaipur, Rajasthan
30/06/2019(Approval
for 3 years)
Survey no.257, Plot No.23 to 28, NH-27, Shapar (Veraval), [email protected]
M/s. Captain Pipes Ltd., Rajkot
20
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
63 to 315 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 400 mm Class III- 6.0 kg/cm2
25 to 400 mm Class IV- 8.0 kg/cm2
20 to 400 mm Class V- 10.0 kg/cm2
25 to 180 mm Class VI- 12.5 kg/cm2
90 to 180 mm Class I- 2.5 kg/cm263 to 315 mm Class II- 4.0 kg/cm263 to 315 mm Class III- 6.0 kg/cm263 to 315 mm Class IV- 8.0 kg/cm263 to 315 mm Class V- 10.0 kg/cm2
90 to 315 mm Class I- 2.5 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 315 mm Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 400 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
125 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
35M/s. Apollo Pipes Ltd., Uttar
Pradesh
Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam Budh Nagar,
Uttar [email protected]
63 to 315 mm Class III- 6.0 kg/cm206/03/2021
(Approval for 3 years)
63 to 315 mm (Except 125 mm)
Class II- 4.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class III- 6.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class IV- 8.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class V- 10.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
90 to 315 mm Class V- 10.0 kg/cm2
90 to 250 mm Class II- 4.0 kg/cm290 to 200 mm (Excluding 180
mm)Class III- 6.0 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class IV- 8.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
30/06/2020(Approval
for 3 years)29
M/s. Skipper Limited, Ahmedabad
Survey No. 823, Village: Rajoda, Ahmedabad-Rajkot Highway, Taluka: Bavla, Ahmedabad-
[email protected]@skipperlimited.com
32M/s. Aron Pipes Pvt. Ltd.,
Surat
Block No. 187, Plot No. 1 to 21, Kim-Mandvi Highway, Kim, [email protected]
30/06/2020(Approval
for 3 years)
30M/s. Tijaria Polypipes
Limited, Jaipur
SP-1-2316, Ramchandrapura industrial area, Sitapura Extn., [email protected]
[email protected]@tijaria-pipes.com
30/06/2020(Approval
for 3 years)
31M/s. Texmo Pipes &
Products Ltd., Burhanpur (MP)
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331
30/06/2020(Approval
for 3 years)
36M/s. Parvati Agro Plast,
Sangli (Maharashtra)
UNIT-II, Gate NO. 11/1, Bamnoli, Taluka: Miraj, District:- Sangli, Maharshtra
06/03/2021(Approval
for 3 years)
06/03/2021(Approval
for 3 years)
06/03/2021(Approval
for 3 years)
Survey no. 108/P, Near Toll Plaza, Rajkot-Gondal National Highway-27 (Old-8B),
Bhunava, Gondal, [email protected]
M/s kelvin Plastics Private Ltd.,Rajkot
33
34M/s. Duke Pipes Pvt. Ltd.,
Palanpur
Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001, Banaskantha
[email protected]@dukepipes.com
06/03/2021(Approval
for 3 years)
06/03/2021(Approval
for 3 years)
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila, [email protected]
M/s. Sagar Polytechnik Ltd., Rajkot
39
Block No. 792, Near Monik Industries, Sadaspur road, Vill. Moti Bhoyan, Tal. Kalol,
Dist. [email protected]@vishakhairrigation.com
M/s. Vishakha Irrigation Pvt. Ltd., Ahmedabad
37
38M/s. Guru Polyplast,
Palanpur
4/11 & 4/12, GIDC Chandisar, Palanpur, Banaskantha-385510
06/03/2021(Approval
for 3 years)
Size (mm) Class1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Remarks
63 to 315 mm (Except 125 mm)
Class II- 4.0 kg/cm2
63 to 315 mm (Except 125 mm)
Class III- 6.0 kg/cm2
125 to 400 mm Class I- 2.5 kg/cm2
63 to 400 mm Class II- 4.0 kg/cm2
40 to 400 mm Class III- 6.0 kg/cm2
25 to 400 mm Class IV- 8.0 kg/cm2
20 to 400 mm Class V- 10.0 kg/cm2
20 to 400 mm Class VI- 12.5 kg/cm2
63 to 315 mm Class II- 4.0 kg/cm2
63 to 315 mm Class III- 6.0 kg/cm2
63 to 315 mm Class V- 10.0 kg/cm2
M/s. Godavari Pipes Pvt. Ltd., Rajkot
Survey No. 137/1, Plot no.8 & 9, Veraval Padvala Main Road, Ta.;- Kotda Sangani, Dist.:-
Rajkot- [email protected]
11/02/2022(Approval
for 3 years)42
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
40M/s. Active Pipe Industries,
Dhoraji
Nr. Railway crossing, Junagadh Road, Dhoraji-360410
11/02/2022(Approval
for 3 years)
41M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215
11/02/2022(Approval
for 3 years)
Size (mm) (NM) Class
1 2 3 4 5 6 740 to 200 mm RMS40 to 200 mm CM
150 to 200 mm CS200 to 400 mm CD
40 to 250 mm CM
150 to 250 mm CS
150 to 400 mm CS 40 to 400 mm CM40 to 400 mm RMS
250 to 400 mm PMS115 to 400 mm CD115 to 175 mm RDS
125, 175, 200, 250 mm
CM
175, 200, 250 mm CS
100 to 150 mm , 175 mm & 200 mm
CM
150 mm, 175 mm & 200 mm
CS
125 mm, 150 mm & 200 mm
RS
125, 150, 175, 200 mm
CM
150, 175, 200, 250 mm
CS
100, 115, 125, 150, 175, 200, 250 mm
CM
150, 175, 200, 250 mm
CS
150 mm to 250 mm CS40 mm to 300 mm CM
100 mm to 300 mm CD40 mm to 200 mm RMS
150 mm to 400 mm CS
40 mm to 400 mm CM
7M/s. Vinayak Polypipes Pvt. Ltd., Himmatnagar
Survey no.-589, 590/2, Harsol-Ahmedabad Road, At & PO- Harsol,
Talod, [email protected]
31/12/2020(Renewed for 2 yrs)
-
8M/s. Skipper Limited,
Kolkata
Ububeria Unit, N.H. No.-6, Village:- Madhabpur, PO:- Mahishrekha, PS:-
Uluberia, Howrah-711 [email protected]
30/06/2019(Approval
for 3 years)-
30/06/2019(Approval
for 3 years)
Survey no.257, Plot No.23 to 28, NH-27, Shapar (Veraval), [email protected]
M/s. Captain Pipes Ltd., Rajkot
9 -
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of uPVC Screen & Casing Pipes (IS-12818) with ISI mark
as per Vendor Selection Report submitted by Different TPI(As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
2M/s. Polysil Pipes,
Silvassa
Survey No. 103/1/2, Rakholi Industrial Estate, Village-Rakholi, Silvassa, D &
[email protected][email protected]
31/01/2019(5 yrs
Approval over)
1M/s. Super Industrial
Corp., PatialaC-67, Focal Point, Patiala-147004
31/01/2019(5 yrs
Approval over)
3M/s. Jain Irrigation
Systems Ltd., Jalgaon
Jain Plastics Park, N.H. no. 6, P.O. Box 72, Bambhori, Jalgaon-425001,
31/01/2019(5 yrs
Approval over)
4M/s. Dutron Polymers
Ltd., Kheda
Bolck No. 642, N.H. 8, At-Hariyala, Kheda
31/12/2019(Renewed for 2 yrs)
-
5M/s. Kriti Industries (India) Ltd., Indore
13/1, Tarapura, Plot no. 75-86, Sector-2, Pithampur, Dist. Dhar, MP
31/12/2019(Renewed for 2 yrs)
-
6M/s. Stuti Pipes Pvt. Ltd.,
Sabarkantha
Block no. 433, Tajpur Oran road, Village:- Prantij, Taluka:- Prantij, Dist.:-
31/12/2020(Renewed for 2 yrs)
-
Size (mm) (NM) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
150 to 350 mm CS
100 to 350 mm CM
150 to 300 mm CS40 to 300 mm CM
100 to 400 mm CD250 to 300 mm PMS100 to 300 mm RMS
40 to 250 mm CM
150 to 250 mm CS
40 to 250 mm RS
150 to 200 mm CS
100 to 250 mm CM
100 to 250 mm RS
150 to 250 mm CS
40 to 250 mm CM
175 to 300 mm CS100 to 300 mm CM100 to 300 mm CD200 to 300 mm PMS200 to 300 mm PDS100 to 175 mm RMS100 to 175 mm RDS150 to 250 mm CS40 to 250 mm
(Except 115 mm)CM
50 to 200 mm (Except 115 mm)
RMS
150 to 200 mm CS
100 to 200 mm CM
14M/s. Kisan Irrigation &
Infrastructure Ltd., Dhar (MP)
Factory:- Unit II, Plot No. 91-110, Sector no. 3, Pithampur, Dhar, Madhya
[email protected]@kisanirrigation.com
30/06/2020(Approval
for 3 years)
M/s. Texmo Pipes & Products Ltd., Burhanpur
(MP)
98, Bahadarpur Road, Burhanpur, Madhya Pradesh-450331
30/06/2020(Approval
for 3 years)13
M/s. Prince Pipes & Fittings Pvt. Ltd., Dadra &
Nagar Haveli
Survey No. 53 & 85, Jayant Desai Marg, Waghdhara Road, Dadra, Silvassa, D &
N.H. - 396 [email protected]@princepipes.com
30/06/2020(Approval
for 3 years)12
11M/s. Duke Plasto
Tech.Pvt. Ltd., Palanpur
N.H. 27, Deesa Highway, Badarpura, Palanpur-385511, North Gujarat
30/06/2020(Approval
for 3 years)
10M/s. Sagar Polytechnik
Ltd., Rajkot
Plot no. 109/110/111, Old highway, Bamnbore GIDC, Bamnbore, Chotila,
30/11/2019(Approval
for 3 years)
15M/s. Duke Pipes Pvt. Ltd.,
Palanpur
Survey No.365/1, At & post : Chadotar, Gadh Road, Palanpur-385001,
[email protected]@dukepipes.com
06/03/2021(Approval
for 3 years)
16M/s. Apollo Pipes Ltd.,
Uttar Pradesh
Plot (Khasra ) No. 2928 (JHA) & 2938, Dhoom Manikpur, Dadri, Dist. Guatam
Budh Nagar, Uttar [email protected]
06/03/2021(Approval
for 3 years)
17M/s. C.R.I. Pumps Pvt.
Ltd., Kalol
Block NO. 56, B/H Jhonson Screen, Khatraj-Kalol Road, Khatraj, Kalol,
11/02/2022(Approval
for 3 years)
Size (mm) (NM) Class
1 2 3 4 5 6 7
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks
150, 175, 200 & 250 mm
CS
100, 125, 150, 175, 200 & 250 mm
CM
18M/s. Vasani Polymer Pvt. Ltd., Talod (Sabarkantha)
Survey no. 488/P & 519/P, GIDC Talod, Post box no. 31, Sabarkantha-383215
11/02/2022(Approval
for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1 2 3 4 5 6
1M/s. Samshi Pipe
Industries Ltd., Vadodara
Plot No. E-9, Savli GIDC Estate, Manjusar, Savli, Vadodara-391165
hitesh [email protected]
MS Helical Seam Submerge Arc Welded Pipe :-Size range 18' (457 mm) to 100" (2540 mm) and thickness 5 mm to 20 mm in length 6 mtr to 12 mtr.
31/01/2017 DELETED
2M/s. Bhushan Steel Ltd.,
Raigadh
Nigan-savroli, Isamba Phata khopoli, Tal;- Khalapur, Dist:- Raigad, Maharastra-
ERW Pipes of range:- Dia- 3" to 8" (80 NB to 200 NB), 8" to 24" maximum thickness up to 12.7 mm.
31/01/2019(5 yrs
Approval over)
3M/s. Ratnamani Metals &
Tubes Ltd., Chhatral
Plot no. 3306 to 3309, GIDC Estate, Chhatral Phase IV, Ahmedabad-Mehasana
Highway, Chhatral, kadi, Mehasana-382729
OD:- 355.6 mm to 1219 mm (14" to 48" N.B.)Wall thickness:- 5 mm to 28 mm
31/01/2019(5 yrs
Approval over)
4M/s. Ratnamani Metals &
Tubes Ltd., Kutch
Survey No. 474, Bhimasar road, Vill. Bhimasar, Tal. Anjar, Dist. Kutch -370201
OD:- 457 mm to 2540 mm (18" to 100" )Wall thickness:- 5 mm to 20 mm
31/01/2019(5 yrs
Approval over)
5M/s. Jindal Saw Limited,
Kutch
Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road,
Tal: Mundra, Dist: Kutch-370415
[email protected]@jindalsaw.com
OD:- 457.2 mm to 2540 mm (18" to 100" )Wall thickness:- 6 mm to 25 mm
31/01/2019(5 yrs
Approval over)
6M/s. Asian Mills Pvt. Ltd.,
Ahmedabad
Asian Mills PVt. Ltd., Plot NO. 1, Phase-1, GIDC Chhatral, Kalol, Mehsana
(1) IS: 1239 (Part-1)2004:- 15 mm to 80 mm Nominal Bore, Light, Medium, Heavy Class and 100 mm to 150 mm Nominal Bore Medium & Heavy Class, 100 mm NB Light Class Black plain end and screwed & socketed pipes.(2) IS : 3589-2001:- 168.3 mm OD to 508 mm OD (Except 244.5 mm OD) Blakc plain end and Beveled end Pipes Gr.Fe:330 & Fe:410(3) IS:4270-2001: 100 mm NB to 400 mm NB (Except 225 mm NB) Black Beveled End pipes Gr. Fe:410
31/01/2019(5 yrs
Approval over)
7M/s. Welspun corp ltd.,
Dahej (Bharuch)
Unit-I (Dahej Plant), Welspun Corp. Ltd., Village: Jolva & vadadla, Tal: Vagra, Dahej
Road, Bharuch, Gujarat-392 130
(1) M.S. Pipe from size :-457 mm to 1930 mm & thickness 5 mm to 14 mm(2) 3LPE/LPP coating for pipe size:- 4 inch to 64 inch OD(3) External coating FBE/CFBE for pipe size:- 4 inch to 64 inch OD(4) Internal liquid Epoxy for pipe size:- 20 inch to 64 inch ID
31/01/2019(5 yrs
Approval over)
8 M/s. PSL Ltd., Anjar
Village varsana, Survey no. 39,40,42, Bhachau - Bhimasha road/ Nr.
Gandhidham Varsana, taluka- Anjar, Kutch-370240
(1) Helical Seam Submerged Arc Welded Pipes:- ( IS 3589; Grade 330 & 410 IS 5504);-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 5 mm to 25 mm(2) 3LPE, 3LPP, CWC, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, ICP, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.3 mm to 2540 mm OD(b) Thickness Range:- 2 mm to 50 mm
31/01/2019(5 yrs
Approval over)
Approved Size & Thickness
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of MILD STEEL (M.S.) Pipes (IS 3589) with ISI mark as per Vendor Selection
Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
1 2 3 4 5 6
Approved Size & Thickness Sr. No.
Name of Agency Adress/E-mail AddressApproval
Valid up to Date
Remarks
9M/s. Welspun Corp Ltd, Anjar
Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar,
Kutch-370110(1) [email protected]
(2) Sanjay_raghavan @ welspun.com
(1) Helical Seam Submerged Arc Welded Pipes:- (a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 4 mm to 25 mm(2) 3LPE, Coaltar Tape, CTE, CML, Liquid Food Grade Internal Epoxy Coating, DFBE, Coating on Pipes:-(a) Outside Dia. Range:- 168.1 mm to 3556 mm OD(b) Thickness Range:- 0.1 mm to 50 mm
31/01/2019(5 yrs
Approval over)
10M/s. Essar Steel India Ltd.,
Hazira
Essar Steel India Ltd., (pipe mill Division), 27th Kms Surat Hazira road, Surat, Gujarat-
406 mm to 2540 mm in thickness 6 to 25.4 mm WT.
31/12/2019(Renewed for 2 yrs)
-
11
M/s. Surya Roshni Limited, Kutch
(Formerly Known as M/s. Surya Global steel tubes
Ltd.)
Survey No.188, Anjar-Mundra highway, Village:-Bhuvad, Kutch-370130
[email protected][email protected]
(A) MS ERW pipe:- 15 to 400 mm NB, up to 12.70 mm WT, Grade Fe 330 & 410 (B) MS Spiral Welded pipe:- From 457.2 mm to 2540 mm OD, up to 25 mm WT, Grade Fe 330 & 410
31/12/2019(Renewed for 2 yrs)
Name Changed
vide letter No.218
dtd. 4-4-2018
12 M/s. SAIL Bokaro Steel City, Bokaro, Jharkhand
M.S. pipe of IS 3589:-2001 (ISI mark) 406 mm to 1626mm in thickness 6 to 25.4 mm WT.
31/12/2019(Renewed for 2 yrs)
Recommended by
TCEL
13M/s. Riddhi Steel &
Tubes (P) Ltd., Ahmedabad
83-84, Village- Piplaj, Pirana Road, Ahmedabad-382 [email protected]
(1) M.S. ERW Steel Pipe conforms IS :1239: Part-1:2004- (Black & Galvanised) With ISI Mark - Size :- 15 to 150 mm NB(2) M.S. ERW Steel Pipe conforms IS :3589:2001- (Black ) With ISI Mark - Size :- 150 to 300 mm NB
30/06/2019(Approval
for 3 years)-
14M/s. Surindra Engineering Company Limited, Gandhinagar
Factory;- Block No.1517, Village;- Moti Bhoyan, Kalol-Khatraj Road, Kalol,
M.S. Pipe as per IS 3589-2001(1) Spiral Saw Pipes:- OD 16 inch to 100 inch with pipe thickness from 5 mm to 16 mm(2) L Saw Pipes:- OD 36 inch to 100 inch with pipe thickness from 6 mm to 16 mm
30/06/2020(Approval
for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1 2 3 4 5 6
1M/s. Welspun Corp Ltd, Anjar
Welspun Corp Ltd., Survey No. 659, Welspun city, versamedi, Anjar, Kutch-370110(1) [email protected](2) Sanjay_raghavan @ welspun.com
(1) Hot Rolled Plates:- 8 mm to 140 mm thickness in all national & international Grades.(2) Hot Rolled Coils:- 6 mm to 25 mm thickness in all national & international Grades
31/01/2019(5 yrs
Approval over)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Mild Steel Hot Rolled Plates & Coils as per Vendor Selection
Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail Address Approved Size & Thickness Approval
Valid up to date
Remarks
Size (mm) Class
1 2 3 4 5 6 7
1M/s. Jai Balaji Industries,
Burdwan (W.B)
Unit-3, Vill. Banskopa, P.O. Rajbandh, Dist. Bardwan, West [email protected]
80 to 1200 mm (Except 125 & 750
mm)K-7 & K-9
31/01/2019(5 yrs Approval
over)
2M/s. Jindal Saw Limited,
Kutch
Jindal Saw Ltd., Integrated Pipe Unit (PIU), Vill: Samaghoda, Paragpar-Mandvi Road, Tal: Mundra, Dist: [email protected]@jindalsaw.com
80 to 1000 mm K-7 & K-931/01/2019
(5 yrs Approval over)
3
M/s. Srikalahasthi Pipes Ltd., A.P.
( Formerly known as M/s. Lanco Industries
Ltd., AP)
Rachagunneri-517641, Srikalahasthi Mandal, Chittor District, [email protected]@srikalahasthipipes.com
100 to 1100 mm ( Except 125 mm)
K-7 & K-931/01/2019
(5 yrs Approval over)
Name changed vide letter no. 299 dtd.17-10-2015
4M/s. Electrotherm (I) Ltd.,
Kutch
Survey no. 325, 310 KM Stone, Nr. Tollnaka, Village:- Samakhiyali, Ta:-
Bhachau, [email protected]
80 to 1200 mm K-7 & K-931/12/2019
(Renewed for 2 years)
-
80 to 1000 mmK-7 , K-8, K-10 &
K-12
80 to 1100 mm K-9
6
M/s. Tata Metaliks Limited, Medinapur
(WB)(Formerly known as Tata Metaliks DI Pipes Ltd.,)
P.O.- Samraipur, Kharagpur, Dist.: Medinapur(West) -721301, West
80 mm to 800 mm (Except 125 & 750
mm) K-7 & K-9
31/12/2019(Renewed for
2 years)
Name changed vide letter no. 217 dtd.4-4-2018
7M/s. Rashmi Metaliks Ltd., Medinipore (WB)
Village:- Gokulpur, P.O. Shyamraipur, Dist. Paschim Medinipore, Pin-721 304, West [email protected]@rashmigroup.com
80 to 1000 mm (Except 125 & 750
mm) K-7 & K-9
31/12/2019(Renewed for 2 years)
-
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of DI Pipes (IS 8329) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval Valid
up to DateRemarks
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
5M/s. Electrosteel Castings
Ltd., Kolakatta
30, B.T. Road, Khardah, P.O. Sukchar, Dist. 24 Parganas (North)
[email protected]@electrosteel.com
31/12/2019(Renewed for
2 years)-
Size (mm) Class
1 2 3 4 5 6 780 to 150 mm
(Except 125 mm)Class-10
80 to 700 mm (Except 125 mm)
Class-15
80 to 150 mm (Except 125 mm) & 200 to 600 mm &
700 mm
Class-20
80 to 150 mm (Except 125 mm) & 200 to 350 mm, 400 to 600 mm & 700
mm
Class-25
80 to 150 mm , Class -1080 to 700 mm, & 800mm, 900mm,
1000 mmClass -15
80 to 700 mm & 900mm,
Class -20
80 to 700 mm & 800mm
Class -25
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of A.C. Pressure Pipes (IS 1592-2003) with ISI mark (Mazza Process) as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
1M/s. Apurva Vinimaya Pvt.
Ltd., Ahmedabad
P.O. Digvijay nagar, Ranip, Ahmedabad-382470
31/12/2019(Renewed for
2 years)-
2A Infrastructure Ltd., Bhilwara (Rajsthan)
P.O. Hamirgarh-311025, Dist:- Bhilwara, Rajasthan
[email protected]@kanoria.org
31/12/2019(Renewed for
2 years)-
Size (mm) Class Type
1 2 3 4 5 6 7 8
1M/s. Navkar Builders Ltd.,
Kheda
Village- Sandhana, Block C.K.no:- 1160 & 1161A, Taluka-Matar, [email protected]
300, 450, 500, 600, 900, 1000, 1200 &
1400 mmNP-3 & NP-4
Vertical Vibrated cast
31-12-2017 DELETED
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of RCC pipe (IS:- 458:1989) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
Remarks
Sr. No.
Name of Agency Adress/E-mail Address Type GradeApproval
Valid up to Date
Remarks
1 2 3 4 6 7
Ordinary Portland cement
53 grade
Portland Pozzolana cement
-
Ordinary Portland cement
53 grade
Portland Pozzolana cement
-
Ordinary Portland cement
53 grade
Portland Pozzolana cement
-
Ordinary Portland cement
53 grade
Portland Pozzolana cement
-
Ordinary Portland cement
53 grade
Portland Pozzolana cement (Fly ash
based -15 to 35%)-
Ordinary Portland cement
53 grade
Ordinary Portland cement
43 GradeAs per IS 8112-
2013With ISI mark
Portland Pozzolana cement (Fly ash
based -15 to 35%)-
Ordinary Portland cement
53 grade
Portland Slag cement -As per IS 455:1989
With ISI mark
6M/s. Gujarat Sidhee Cement Ltd., Veraval
Gujarat Sidhee cement ltd., opp. Veraval Kodinar Highway, Veraval,
31/12/2020(Renewed for
2 years)
7M/s. Hi-Bond Cement (India) Pvt. Ltd., Rajkot
Survey no. 315,316,317, Patidad Gomta Chowkdi, Village Patidad,
Taluka:- Gondal, [email protected]@[email protected]
31/12/2020(Renewed for
2 years)
5M/s. J. K. Laxmi Cement
Ltd., Kalol
Village:- Moti Bhoyan, Taluka:- Kalol, Gandhinagar-382721
31/12/2020(Renewed for
2 yrs)-
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Cement (as per IS 269-2015) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
1M/s. Saurastra Cement
Ltd., Porbandar
Saurashtra Cement Ltd., Nr. Railway Station, Ranavav- 360 560, [email protected]
31/12/2019(Renewed for
2 years)-
4 M/s. Ultratech Ultratech cement, B-wing, 2nd floor, Ahura centre, Mahakali Caves road,
Andheri east, Mumbai-400093
31/12/2019(Renewed for
2 years)
Recommended by TCEL
2 M/s. ACC Ltd. ACC ltd., Cement House, 121,
Maharishi karve road, Mumbai-400020
31/12/2019(Renewed for
2 years)
3 M/s. AmbujaElegant Business park, MIDC Cross
road-B, Off Andheri-Kurla road, Andheri East , Mumbai-400059
31/12/2019(Renewed for
2 years)
Sr. No.
Name of Agency Adress/E-mail Address Type GradeApproval
Valid up to Date
Remarks
1 2 3 4 6 7Ordinary Portland
cement 53 grade
Ordinary Portland cement
43 Grade
Portland Pozzolana cement
-
9M/s. Tata Chemicals Limited, Devbhumi
DwarkaMithapur, Devbhumi Dwarka-361345
Ordinary Portland cement
53 Grade06/03/2021
(Approval for 3 years)
Ordinary Portland cement
43 & 53 Grade
Portland Slag cement -
Portland Pozzolana cement (Fly ash
Based)-
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
30/06/2020(Approval for
3 years)8
M/s. Wonder Cement Ltd., Chittorgarh (Rajasthan)
R.K. Nagar, Taluka- Nimbahera, District;- Chittorgarh, [email protected]
10M/s. Sanghi Industries
Ltd., Kutch
P.O. Sanghipuram-370511, Taluka- Abdasa, Kutch
[email protected]@sanghicement.com
11/02/2022(Approval for
3 years)
Approved Size & Class
Size (mm)
1 2 3 4 6 7
1M/s. Aashiana Rolling Mills
Ltd., Ahmedabad
Survey No.136, Nr. Friends Ispat, Kerala GIDC, Bavla, Ahmedabad-
Fe 415, Fe 500 & Fe 500 D
8 mm to 32 mm 31/12/2019
(Renewed for 2 years)
-
2M/s. Electrotherm (I) Ltd.,
Kutch
Survey No. 325, N.H.No. 8A, 310 KM stone, Nr. Toll Naka, Village:-
Samakhiyali, Ta.: Bhachchau, Kutch-370140
Fe 415, Fe 500 & Fe 550
8 mm to 36 mm 31/12/2019
(Renewed for 2 years)
-
3M/s. Vinayak TMT bars Pvt. Ltd., Dahegam
Survey No. 25/1, 25/2, 24/P, Barot na Mosampur, Bayad Road, Post. Sampa,
Dahegam-382305, [email protected]
Fe 415 & Fe 500 8 mm to 36 mm 31/12/2019(Renewed for 2 years)
-
4M/s. Shree Parmeshwar
Steel Pvt. Ltd., Ahmedabad
220/E, Gujarat Vepari Maha Mandal, A.V. Ltd., Odhav, [email protected]
Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,
Fe 550 D
8 mm to 32 mm 31/12/2019
(Renewed for 2 years)
-
5 M/s. TATA Steel Tata nagar, Jamshedpur, JharkhandFe 415, Fe 500 & Fe
5508 mm to 36 mm
31/12/2019(Renewed for
2 years)
6 M/s. ESSARFe 415, Fe 500 & Fe
5508 mm to 36 mm
31/12/2019(Renewed for
2 years)
7 M/s. SAIL Bokaro Steel City, Bokaro, JharkhandFe 415, Fe 500 & Fe
5508 mm to 36 mm
31/12/2019(Renewed for
2 years)
8 M/s. JINDALFe 415, Fe 500 & Fe
5508 mm to 36 mm
31/12/2019(Renewed for
2 years)
9M/s. Utkarsh Bars Pvt.
Ltd., Surendranagar
Plot no. 725, Bamanbore GIDC, Bamanbore, Taluka:- Chotila, Dist.
[email protected]@aryagroup.co.in
Fe 415, Fe 500 8 mm to 32 mm (Except 22 mm)
31/12/2020(Renewed for
2 yrs)-
10M/s. Gallantt Metal
Limited, Kutch
Nr. Toll Gate, Village:- Samakhyali, Bhachau, Kutch.
Fe 415, Fe 500 & Fe 500 D
8 mm to 32 mm (Except 18 mm & 22
mm)
30/06/2019(Approval for
3 Years)-
11M/s. Akshar Ispat Ltd.,
Himmatnagar
Block No. 158, Nr. GEB Sub-Station, Nikoda Chokdi, At PO Bavsar,
Fe 415, Fe 500 & Fe 500 D
8 mm to 32 mm 30/06/2019
(Approval for 3 Years)
-
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of TMT/HSD Bars (IS 1786:2008) with ISI mark as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail Address Material GradeApproval
Valid up to Date
Remarks
Recommended by
TCEL
Approved Size & Class
Size (mm)
1 2 3 4 6 7
Sr. No.
Name of Agency Adress/E-mail Address Material GradeApproval
Valid up to Date
Remarks
Fe 415, Fe 500 8 mm to 32 mm
Fe 415D, Fe 500D & Fe 550 D
8 mm to 32 mm (Except 18 mm )
13M/s. M.D. Inducto Cast Ltd.,Bhavnagar
survey no.144, Paiki 1 & 2, Nesada, Sihor, Bhavnagar
[email protected]@rudratmx.com
Fe 415, Fe 415 D, Fe 415 S, Fe 500, Fe 500 D, Fe 500 S, Fe 550,
Fe 550 D, Fe 600
8 mm to 32 mm 30/06/2020
(Approval for 3 Years)
14M/s. Diamond TMT & Procon Pvt. Ltd., Bhavnagar
468 & 469-1/2, Village:- Sanodar, Talaja highway, Taluka"- Ghogha,
Fe 415, Fe 500 8 mm to 32 mm 30/06/2020
(Approval for 3 Years)
15 M/s. Vishal Ispat, Valsad
Survey No.39/4P1, 39/5P1, 39/6, 4/1P, 2 & 3, Vatar Road, Village:- Morai,
Taluka;- Pardi, Valsad-396191 [email protected]
Fe 415, Fe 415D, Fe 500, Fe 500D, Fe 500S, Fe 550, Fe
550D
8 mm to 32 mm 11/02/2022
(Approval for 3 years)
16M/s. Nilkanth Concast Pvt. Ltd., Kutch
Survey No. 221, Vadala, Mundra, [email protected]
Fe 500 & Fe 500D 8 mm to 32 mm 11/02/2022
(Approval for 3 years)
17M/s. Balbir Rolling Mills Pvt. Ltd., Vapi (Unit-II)
38/2P, 39/4 & 5 4/1, Morai Vatar Road, Village- Morai, Taluka: Pardi,
Vapi, [email protected]
Fe 415, Fe 415D, Fe 500, Fe 500D, Fe 550,
Fe 550D8 mm to 32 mm
11/02/2022(Approval for
3 years)
Fe 415 & Fe 5008, 10, 12, 16, 20, 28,
32 mm
Fe 415D, Fe 500D 8, 10, 12, 16, 20, 25,
28, 32 mmFusion Bonded Epoxy
Coated8 to 32 mm IS 1620
11/02/2022(Approval for
3 years)
Plot no. 59, 60 & 61, Light Industrial Area, Bhilai, Chhattisgarh-490026
M/s. Hariom Ingots & Power Pvt. Ltd.,
Chhattisgarh18
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
12M/s. Shreeyam Power and
Steel Industries ltd., Gandhidham (Kutch)
Plot no. 332, GIDC, Industrial Estate, Phase-2, Village;- Mithirahar, Taluka:-
Gandhidham, [email protected]
30/11/2019(Approval for
3 Years)
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013
[email protected]@kartarvalves.com
50 to 600 mmPN 1.0 &
1.6With ISI mark
31/01/2019(5 Years Approval
Over)
50 to 1200 mm PN 1.050 to 600 mm PN 1.6
50 to 1000 mm (SGI)
PN 1.0
50 to 600 mm (SGI)
PN 1.6
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
4M/s. Bharat Engineering
Works, Dhrangadhra
Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road,
Dhrangadhra-363310, [email protected]
50 to 600 mmPN 1.0 &
1.6With ISI mark
31/01/2019(5 Years Approval
Over)
5M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,
Medak [email protected]
50 to 600 mm (DI)
PN 1.0 & 1.6
Without ISI Mark
31/01/2019(5 Years Approval
Over)
6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 1600 mm
PN 0.6 to 3.0
Without ISI mark
31/12/2019(Renewed
for 2 years)-
7M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected] to 1200 mm
PN 1.0, 1.6, 2.0 &
2.5
Without ISI mark
31/12/2019(Renewed
for 2 years)
Cast steel/S.G. Iron/ DI
(Without ISI Mark)
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
31/01/2019(5 Years Approval
Over)
Balitikuri, Bakultala, via Dasnagar, Howrah-711113
M/s. H.Sarker & Company, Howrah
3 With ISI mark
-8M/s. Calsens Pvt. Ltd.,
Howrah
Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-
With ISI Mark
31/12/2019(Renewed
for 2 years)
2M/s. Sachdeva Metal
works, Jalandhar
C-33, Focal Point Extension, Jalandhar City-144001
31/01/2019(5 Years Approval
Over)
With ISI mark
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of C.I. Sluice Valves (IS-14846) as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
Up to 600 mm PN 1.0 Up to 300 mm PN 1.6Up to 1200 mm PN 0.6Up to 1500 mm PN 1.0 Up to 1300 mm PN 1.6
Up to 500 mm PN 2.0
50 to 900 mm PN 1.0
50 to 600 mm PN 1.6
11M/s. Bikaner Engineering
Works , Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
[email protected] to 300 mm 1.0 & 1.6
With ISI Mark
31/12/2019(Renewed for 2 years)
-
50 to 600 mmPN 1.0 &
1.6With ISI
Mark
31/12/2019(Renewed for 2 years)
-
700 mmPN 1.0 &
1.6Without ISI
Mark
30/06/2020(Approved for 3 years)
PD type Short Body
(D/F)
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
14M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026
[email protected] to 400 mm - With ISI mark
31/12/2020(Renewed for 2 yrs)
-
15M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M-64, Additional M.I.D.C., Satara-415 004, Maharashtra
[email protected] to 400 mm
up to PN 1.6
Without ISI mark
31/12/2018 DELETED
16M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, [email protected]
50 to 300 mmPN 1.0 &
PN 1.6 With ISI
Mark
31/12/2020(Renewed for 2 yrs)
Pressure Rating
ammended vide letter no. 301 dt. 19-10-2015
9M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,
Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
With ISI Mark
31/12/2019(Renewed
for 2 years)
SG Iron/ Cast steel
(without ISI Mark)
Without ISI Mark
-
13M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021
With ISI Mark
31/12/2019(Renewed
for 2 years)-
10M/s. Upadhaya Valves
Manufacturers Pvt. Ltd., Kolkatta
P 280 Benaras road, [email protected]
[email protected]@upadhayavalves.net
With ISI Mark
31/12/2019(Renewed
for 2 years)
12M/s. Shiva Industries,
Jaipur
Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo
Road, Jhotawara, [email protected]
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
17M/s. Fouress Engineering
(I) Ltd., Aurangabad
C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148
[email protected]@fouressind.com
Up to 750 mmUp to PN
1.6Without ISI
Mark31/12/2018 DELETED
18M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 1000 mmup to PN
1.6Without ISI
Mark
30/06/2019(Approval
for 3 years)-
19M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab
[email protected] to 600 mm
up to PN 1.6
With ISI Mark
30/06/2019(Approval
for 3 years)-
20M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711 108
[email protected] to 1200 mm
PN 1.0 & PN 1.6
With ISI mark30/11/2019
(Approval for 3 years)
-
21M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
1300 to 1600 mm
PN 0.6, PN 1.0, PN 1.6, PN 2.0, PN
2.5 & PN 3.0
Without ISI Mark
30/11/2019(Approval
for 3 years)-
Up to 900 mm PN 1.0 With ISI mark
Up to 500 mm PN 1.6 With ISI mark
Up to 1200 mm PN 1.0Without ISI
mark
Up to 600 mm PN 1.6Without ISI
mark
Up to 1200 mm PN 1.0 With ISI mark
Up to 600 mm PN 1.6 With ISI mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
Up to 1200 mmUp to PN
2.5Without ISI
Mark
50 to 300 mmPN 1.0 &
PN 1.6 With ISI mark
06/03/2021(Approval
for 3 years)
300 to 1200 mm PN 1.0 &
PN 1.6 Without ISI
Mark
06/03/2021(Approval
for 3 years)
50 to 300 mmUp to PN
1.6With ISI mark
350 to 600 mmUp to PN
1.6Without ISI
Mark
25
06/03/2021(Approval
for 3 years)
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004
[email protected]@nvrfittings.com
M/s. Mac International, Jalandhar
26
22M/s. Kalpana valves
Manufacturing co. (P) Ltd., Howrah
Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113
30/06/2020(Approval
for 3 years)D/F
23M/s. Shree Balaji
Industries, Howrah
Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105
30/06/2020(Approval
for 3 years)
30/06/2020(Approval
for 3 years)
Kashi pur, Das nagar, Howrah-711105 (WB)
M/s. Jupiter Engineering Co., Howrah
24 C.I /D.I.
D/F
With ISI Mark
M/s. Sigma Flow Control India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mmPN 1.0 &
PN 1.6 With ISI mark
1300 to 1600 mmUp to PN
2.0Without ISI
Mark
up to 800 mmUp to PN
1.6Without ISI
MarkResilient Seated
50 to 1200 mm PN 1.050 to 600 mm PN 1.6
Up to 1400 mmUp to PN
1.6Without ISI
Mark
50 to 600 mmUp to PN
1.6Without ISI
MarkResilient Seated
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
50 to 1500 mmUp to PN
1.6Without ISI
Mark
30M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
[email protected] to 1000 mm
PN 1.0 & PN 1.6
Without ISI Mark
06/03/2021(Approval
for 3 years)DI
50 to 600 mmUp to PN
1.6With ISI mark
700 to 1500 mmUp to PN
1.6Without ISI
Mark
50 to 1200 mmUp to PN
1.6With ISI mark
50 to 1600 mmUp to PN
1.0Without ISI
Mark
50 to 300 mmPN 1.0 &
PN 1.6 With ISI mark
350 to 600 mmPN 1.0 &
PN 1.6 Without ISI
Mark
50 to 1200 mm PN 1.0 With ISI mark
50 to 600 mm PN 1.6 With ISI mark
600 mm Up to PN
2.5Without ISI
Mark
50 to 600 mmPN 1.0 &
PN 1.6 With ISI mark
Up to 1000 mmUp to PN
1.6Without ISI
Mark
36M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 600 mmUp to PN
1.6Without ISI
Mark
11/02/2022(Approval
for 3 years)
With ISI mark06/03/2021
(Approval for 3 years)
MH-6 Chamrail, Near Kona Express Highway, Howrah-711323
M/s. Kejriwal Castings Ltd., Howrah
28
06/03/2021(Approval
for 3 years)
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402
[email protected]@[email protected],
M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
27
29
06/03/2021(Approval
for 3 years)
69A, Balitikuri Industrial Estate, Howrah-711113
M/s. Indian Valve International, Howrah
31
With ISI mark 06/03/2021(Approval
for 3 years)
Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal
[email protected], [email protected]
M/s. Durga Valves PVt. Ltd., Howrah
06/03/2021(Approval
for 3 years)
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
M/s. Bir Industries, Jalandhar
33
06/03/2021(Approval
for 3 years)
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah32
06/03/2021(Approval
for 3 years)
P-261/1, Benaras Road, Belgachia, Howrah-711108
M/s. Shree Krishna Industries, Howrah
34
35M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -144012
[email protected]@aarko.in
11/02/2022(Approval
for 3 years)
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 1200 mm PN 1.0
50 to 600 mm PN 1.6
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
37M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, Howrah-711108
11/02/2022(Approval
for 3 years)With ISI mark
Size (mm) Class
1 2 3 4 5 6 7 8
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013
[email protected]@kartarvalves.com
50 to 600 mmPN 1.0 &
1.6With ISI Mark
31/01/2019(5 years
approval over)
2M/s. Sachdeva Metal
works, Jalandhar
C-33, Focal Point Extension, Jalandhar City-144001
[email protected] to 350 mm
PN 1.0 & 1.6
Without ISI Mark
31/01/2019(5 years
approval over)
3M/s. H.Sarker &
Company, Howrah
Balitikuri, Bakultala, via Dasnagar, Howrah-711113
[email protected] to 600 mm
PN 1.0 & 1.6
With ISI Mark31/01/2019
(5 years approval over)
4M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal, Medak [email protected]
50 to 1000 mm (DI)
PN 1.0 & 1.6
Without ISI Mark
31/01/2019(Renewed for
2 years)
5M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 600 mm
PN 0.6 to 3.0
Without ISI Mark
31/12/2019(Renewed for
2 years)
As per IS 5312 (part 1 )
6M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected] to 600 mm
PN 1.0 & 1.6
With ISI Mark31/12/2019
(Renewed for 2 years)
Cast steel/S.G. Iron/ DI
(without ISI Mark)
50 to 300 mm PN 1.0
50 to 600 mm PN 1.6
Upto 800 mm PN 0.6
Upto 1500 mm PN 1.0
Upto 1500 mm PN 1.6
Upto 900 mm PN 2.0
Upto 1200 mm PN 3.0
9M/s. Bikaner Engineering
Works, Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
[email protected] to 300 mm
PN 1.0 & 1.6
Without ISI mark31/12/2019(Renewed for 2 years)
As per IS 5312 (part 1 )
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Non Return (Reflux) Valves (IS:5312) as per Vendor Selection
Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
-
8M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,
Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
Without ISI Mark
31/12/2019(Renewed for
2 years)
S.G. Iron/ Cast Iron
7M/s. Calsens Pvt. Ltd.,
Howrah
Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101
[email protected] ISI Mark
31/12/2019(Renewed for
2 years)
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 300 mmPN 1.0 &
1.6Without ISI mark
31/12/2019(Renewed for 2 years)
As per IS 5312 (part 1 )
350 to 600 mmPN 1.0 &
1.6Without ISI mark
30/06/2020 (Approval for
3 years)
As per IS 5312 (part 1 )
11M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021
[email protected] to 600 mm
PN 1.0 & PN 1.6
Without ISI mark31/12/2019(Renewed for 2 years)
As per IS 5312 (part 1 )
12M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026
[email protected] to 300 mm
Without ISI Mark
31/12/2020(Renewed for
2 yrs)
13M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M-64, Additional M.I.D.C., Satara-415 004, Maharashtra
[email protected] to 250 mm
up to PN 1.6
Without ISI Mark
31/12/2018 DELETED
14M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, [email protected]
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark
31/12/2020(Renewed for
2 yrs)-
15M/s. Fouress
Engineering (I) Ltd., Banglore
Plot-2, Phase-II, Peanga Industrial Area, [email protected]
450 to 1800 mm
Up to PN 16 (16 bar)
Without ISI Mark
31/12/2020(Renewed for
2 yrs)
Single Door & Multi door
16M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114
[email protected] to 600 mm
up to 24 kg/sqcm
Without ISI Mark
31/12/2020(Renewed for 2 yrs)
-
up to 1200 mm
up to PN 1.6
Without ISI Mark
Dual plate check valve
up to 500 mmup to PN
1.6Without ISI
MarkSwing Type check valve
30/06/2019(Approval for
3 years)17
M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
10M/s. Shiva Industries,
Jaipur
Kh. No. 518, Near Vaidh Ji ka Chouraha, Gram Niwaroo, Niwaroo
Road, Jhotawara, [email protected]
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
150 to 300 mm PN 1.0
50 to 125 mm PN 1.6
350 to 400 mm Up to PN
1.6 Without ISI
Mark
19M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711 108
[email protected] to 900 mm
PN 1.0 & PN 1.6
Without ISI Mark
30/11/2019(Approval for
3 years)
20M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
650 to 1200 mm
PN 2.0, PN 2.5 & PN
3.0
Without ISI Mark
30/11/2019(Approval for
3 years)
Up to 500 mmUp to PN
1.6With ISI Mark
CI D/F Swing Check
Up o 1000 mm PN 1.0Without ISI
Mark
CI D/F Multi door Swing
Check
22M/s. Shree Balaji
Industries, Howrah
Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105
[email protected] to 600 mm
Up to PN 1.6
With ISI Mark30/06/2020
(Approval for 3 years)
CI D/F Swing Check
Up to 600 mm PN 1.0 &
PN 1.6With ISI Mark
up to 1200 mm
PN 1.6Without ISI
Mark
50 to 900 mmPN 1.0 &
PN 1.6Without ISI
Mark
40 to 300 mm -Without ISI
MarkDI Resilient
Seated
50 to 300 mmUp to PN
1.6With ISI Mark
350 to 450 mmUp to PN
1.6Without ISI
Mark
Up to 600 mm As per IS 5312
(part 1 ) Up to 1400
mm As per IS 5312
(part 2)
50 to 600 mm PN 1.0 &
PN 1.6With ISI Mark Single Door
Up to 1500 mm
UP to PN 1.6
Without ISI markSingle/ Multi
Door
Up to 600 mm PN 1.0 With ISI Mark
50 to 1200 mmUp to PN
1.6Without ISI mark
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark
350 to 500 mmPN 1.0 &
PN 1.6Without ISI mark
50 to 600 mm UP to PN
1.6With ISI Mark
500 to 1000 mm
UP to PN 1.6
Without ISI mark
With ISI MarkSwing Check
type
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab
M/s. Sondhi Industries,Jalandhar
1830/06/2019
(Approval for 3 years)
21M/s. Kalpana valves
Manufacturing co. (P) Ltd., Howrah
Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113
Swing Check 06/03/2021
(Approval for 3 years)
25
Swing Check type
30/06/2020(Approval for
3 years)
23M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
30/06/2020(Approval for
3 years)
M/s. Sigma Flow Control India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403
06/03/2021(Approval for
3 years)
M/s. Mac International, Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004
[email protected]@nvrfittings.com
Swing Check06/03/2021
(Approval for 3 years)
28
26
M/s. Kejriwal Castings Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-711323
06/03/2021(Approval for
3 years)
M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402
[email protected]@cal2.vsnl.net.in
Up to PN 1.6
Without ISI Mark
06/03/2021(Approval for
3 years)
M/s. Durga Valves PVt. Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal
[email protected], [email protected]
30
29M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
06/03/2021(Approval for
3 years)
DISwing Check
M/s. Indian Valve International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
06/03/2021(Approval for
3 years)Swing Check
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
31M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
50 to 800 mmUP to PN
1.6Without ISI mark
06/03/2021(Approval for
3 years)Swing Check
32M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
[email protected] to 300 mm
PN 1.0 & PN 1.6
With ISI Mark06/03/2021
(Approval for 3 years)
Swing Check
50 to 600 mm PN 1.0 &
PN 1.6With ISI Mark
Up to 700 mm PN 1.0 Without ISI mark
50 to 300 mmPN 1.0 &
PN 1.6With ISI Mark
Up to 600 mm Up to PN
1.6Without ISI mark
26M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 900 mmUp to PN
2.5without ISI mark
11/02/2022(Approval for
3 years)Swing Check
27M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, Howrah-711108
[email protected] to 600 mm
PN 1.0 & PN 1.6
With ISI Mark11/02/2022
(Approval for 3 years)
34M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -144012
[email protected]@aarko.in
11/02/2022(Approval for
3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
06/03/2021(Approval for
3 years)33
M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711108
Size (mm) Class
1 2 3 4 5 6 7 8
40 to 600 mm PN 1.0
40 to 300 mm PN 1.6
2M/s. Sachdeva Metal
works, Jalandhar
C-33, Focal Point Extension, Jalandhar City-144001
[email protected] to 450 mm
PN 1.0 & 1.6
Without ISI mark
31/01/2019(5 years approval
over)
40 to 2600 mm 150#Without ISI
mark
31/01/2019(5 years approval
over)
Class as per API Standard
40 to 2000 mmPN 1.0 &
PN 1.6With ISI Mark
31/12/2019(Renewed
for 2 years)-
4M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,
Medak [email protected]
200 to 4000 mm (DI)
PN 1.0 & 1.6
Without ISI mark
31/01/2019(5 years approval
over)
-
5M/s. Delval Flow
Controls Pvt. Ltd., Pune
GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka Khandala, District-
80 to 2200 mm PN 10
Without ISI mark
(As per BS EN 593/API 609
Specification)
31/12/2019(Renewed
for 2 years)-
6M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant-I)
Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, Gujarat
[email protected]@gmail.com
50 to 1000 mmPN 0.6 to
3.0Without ISI
Mark
31/12/2019(Renewed
for 2 years)
As per IS 13095/ BS 5155-593 / AWWA C 504
7M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
[email protected] to 2400 mm
PN 0.6 to 3.0
Without ISI Mark
31/12/2019(Renewed
for 2 years)
As per IS 13095/ BS 5155-593 / AWWA C 504
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Butterfly Valves (IS 13095) as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013
[email protected]@kartarvalves.com
31/01/2019(5 years approval
over)
With ISI mark
3M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
40 to 600 mm PN 1.0 With ISI Mark
Wafer Short, Double flangedCS/S.G. Iron/M.S. Fabricated/DI
40 to 300 mm PN 1.6 With ISI Mark
CS/S.G. Iron/M.S. Fabricated/DI Wafer Short
650 to 2000 mmPN 1.0 &
PN 1.6
Without ISI Mark
2100 to 2600 mmPN 1.0 &
PN 1.6
Without ISI Mark
( As per AWWA C504 )
40 to 300 mmPN 1.0 &
1.6Wafer Type
40 to 1200 mmPN 1.0 &
1.6Double Flange
upto 3800 mm PN 0.6
upto 3000 mm PN 1.0
upto 2700 mm PN 1.6
upto 2600 mm PN 2.0
upto 800 mm PN 2.5
upto 1200 mm PN 3.0
upto 650 mm PN 4.0
50 to 300 mmPN 1.0 to
1.6
Wafer Short (resilient Seated)
200 to 1200 mmPN 1.0 to
1.6
Double flange short, (resilient
Seated)
12M/s. Intervalve (India)
Ltd., Pune
94/1 Manjari, Off Soli, Poonawalla Road, Pune-412307
[email protected] to 2400 mm
PN 0.6, PN 1.0, PN 1.6
Without ISI mark
(As per IS 13095/ BSEN
593/API -609 / AWWA C 504)
31/12/2020(Renewed for 2 yrs)
CI, SGI (DI), M.S. Fabricated
13M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road, Jalandhar-144026
[email protected] to 600 mm -
Without ISI Mark
31/12/2020(Renewed for 2 yrs)
-
14M/s. Joshijampala
Engineering Pvt. Ltd., Satara
M-64, Additional M.I.D.C., Satara-415 004, Maharashtra
[email protected] to 2800 mm
up to PN 1.6
Without ISI Mark
31/12/2018 DELETED
CS/S.G. Iron/M.S.
Fabricated/DI Double flange
With ISI Mark
With ISI Mark31/12/2019(Renewed
for 2 years)
8M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
31/12/2019(Renewed
for 2 years)
9M/s. Calsens Pvt. Ltd.,
Howrah
Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-
Without ISI Mark
31/12/2019(Renewed
for 2 years)
11M/s. Upadhaya valves
Manufacturers Pvt. Ltd., Kolkatta
P 280 Benaras road, [email protected]
[email protected]@upadhayavalves.net
10M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,
Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
31/12/2019(Renewed
for 2 years)
SG Iron/ Cast steel
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
15M/s. Perfect valves Pvt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex, [email protected]
40 to 300 mm & 350 to 600 mm
PN 1.0 & PN 1.6
With ISI Mark31/12/2020(Renewed for 2 yrs)
16M/s. Fouress Engineering
(I) Ltd., Banglore
Plot-2, Phase-II, Peanga Industrial Area, [email protected]
100 to 4000 mmUp to PN
40 (40 Bar)
Without ISI Mark
31/12/2020(Renewed for 2 yrs)
17M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
up to 900 mmup to PN
1.6Without ISI
Mark
30/06/2019(Approval for
3 years)-
40 to 300 mmup to PN
1.6With ISI Mark
350 to 700 mmup to PN
1.6Without ISI
Mark
19M/s. Dynamic Valves Pvt.
Ltd., Mumbai
R-353, Rabale MIDC, Navi Mumbai-400701
[email protected] to 1800 mm
up to PN 1.6
Without ISI Mark
30/06/2019(Approval for
3 years)-
20M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711 108
[email protected] to 2000 mm
PN 1.0 & PN 1.6
Without ISI Mark
30/11/2019(Approval for
3 years)-
350 to 600 mm PN 1.6
40 to 1200 mmPN 2.0, PN 2.5 & PN
3.0
2700 to 3000 mmPN 1.0 &
PN 1.6
22M/s. Shiva Industries,
Jaipur
Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,
50 to 700 mmPN 1.0 &
PN 1.6Without ISI
mark
30/06/2020(Approval for
3 years)
Up to 900 mm PN 1.0 With ISI mark
Up to 950 mmUp to PN
2.5Without ISI
mark
Up to 300 mmUp to PN
1.6With ISI mark
Up to 1100 mmUp to PN
1.6Without ISI
mark
25
M/s. Rotex Manufacturers &
Engineering Pvt. Ltd., Thane (Maharashtra)
Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra
[email protected]@rotexindia.com
Up to 2600 mmUp to PN
16Without ISI
mark
30/06/2020(Approval for
3 years)
40 to 1200 mm PN 1.040 to 2000 mm PN 1.6
Up to 1800 mmUp to PN
2.5Without ISI
mark
27M/s. Sigma Flow Control
India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403
[email protected] to 1500 mm
PN 1.0 & PN 1.6
Without ISI mark
06/03/2021(Approval for
3 years)
21M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab
30/06/2019(Approval for
3 years)-18
C.I./ D.I.30/06/2020(Approval for
3 years)
30/06/2020(Approval for
3 years)
30/06/2020(Approval for
3 years)24
M/s. Shree Balaji Industries, Howrah
Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105
M/s. Kalpana valves Manufacturing co. (P)
Ltd., Howrah
Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113
Without ISI mark
-30/11/2019
(Approval for 3 years)
M/s. Sondhi Industries, Jalandhar
26M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
With ISI mark
Size (mm) Class
1 2 3 4 5 6 7 8
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI Mark
50 to 300 mmUp to PN
1.6With ISI mark
350 to 500 mmUp to PN
1.6Without ISI
mark
350 to 2000 mm PN 1.0 &
PN 1.6 With ISI mark CL-125/ CL-150
2000 to 2400 mmUp to PN
2.0Without ISI
mark
80 to 1200 mmPN 1.0 &
PN 1.6With ISI mark
Up to 2500 mmUp to PN
1.6Without ISI
markDouble Flange
40 to 1200 mmPN 1.0 &
PN 1.6
1400 to 2000 mm PN 1.6
40 to 1800 mmUp to PN
2.0Without ISI
Mark
40 to 600 mmPN 1.0 &
PN 1.6 With ISI mark
700 to 2000 mmPN 1.0, PN 1.6 & PN
2.5
Without ISI mark
250 to 1000 mmUp to PN
1.6With ISI mark
250 to 1400 mmUp to PN
1.6Without ISI
mark
40 to 1200 mmUp to PN
1.6With ISI mark
40 to 1900 mmUp to PN
1.6Without ISI
mark
35M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
[email protected] to 600 mm
PN 1.0 & PN 1.6
Without ISI mark
06/03/2021(Approval for
3 years)
50 to 1200 mm PN 1.0 With ISI mark50 to 600 mm PN 1.6 With ISI mark
Up to 1800 mmUp to PN
2.5Without ISI
mark
40 to 300 mm PN 1.0 With ISI mark
Up to 1000 mmUp to PN
1.6without ISI
mark
38M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 1000 mmup to PN
1.0Without ISI
mark
11/02/2022(Approval for
3 years)
39M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, Howrah-711108
[email protected] to 1200 mm
PN 1.0 & PN 1.6
With ISI mark11/02/2022
(Approval for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
37M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -144012
[email protected]@aarko.in
11/02/2022(Approval for
3 years)
28M/s. Mac International,
Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004
[email protected]@nvrfittings.com
06/03/2021(Approval for
3 years)
M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402
[email protected]@[email protected],
06/03/2021(Approval for
3 years)29
M/s. Indian Valve International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
06/03/2021(Approval for
3 years)
31
30
M/s. McWane Services Pvt. Ltd., Coimbatore
32143/2A, Anna Nagar Road, Neelambur,
06/03/2021(Approval for
3 years)DI
M/s. Kejriwal Castings Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-711323
M/s. Durga Valves PVt. Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West
06/03/2021(Approval for
3 years)
With ISI mark 06/03/2021(Approval for
3 years)
06/03/2021(Approval for
3 years)
M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711108
M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
06/03/2021(Approval for
3 years)34
Size (mm) Class
1 2 3 4 5 6 7 8 9
15 to 50 mmPN 1.0 &
1.6With ISI mark
50 to 200 mmPN 1.0 &
1.6Kinetic Air
valveWithout ISI
mark
15 to 50 mmPN 1.0 &
1.6Without ISI
mark
50 to 200 mmPN 1.0 &
1.6Kinetic Air
valveWithout ISI
mark
3M/s. VAG Valves India Pvt. Ltd., Hyderabad
Plot no.57 &56, Phase -III, APIIC, Pashamylaram, Patancheru Mandal,
Medak [email protected]
32 to 200 mm (D.I.)
PN 1.0 & 1.6
Without ISI mark
31/01/2019(5 years Approval
over)
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
25 to 50 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper
ProofWithout ISI
mark
20 to 200 mmPN 0.6 to
3.0-
Without ISI mark
-
20 to 300 mmPN 0.6 to
3.0Kinetic
Without ISI mark
As per AWWA C-
512
31/01/2019(5 years Approval
over)
Plot No. 67, Phase-K, Mayurnagar, B/h. T.V. Station, Halvad Road, Dhrangadhra-
363310, [email protected]
M/s. Bharat Engineering Works, Dhrangadhra
4
5M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad, Gujarat.
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of C.I. Air Valves (IS 14845) as per Vendor Selection Report submitted by
Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-144013
[email protected]@kartarvalves.com
31/01/2019(5 years Approval
over)
31/01/2019(5 years Approval
over)
C-33, Focal Point Extension, Jalandhar City-144001
M/s. Sachdeva Metal works, Jalandhar
2
31/12/2019(renewed for
2 years)
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 50 mmPN 1.0,
1.6, 2.0 & 2.5
S-1 & S-2Without ISI
markCS/S.G. Iron/DI
25 to 200 mmPN 1.0,
1.6, 2.0 & 2.5
DS-2 Without ISI
markCS/S.G. Iron/DI
25 to 200 mmPN 1.0,
1.6, 2.0 & 2.5
Double Acting
Kinetic DK Type
Without ISI mark
CS/S.G. Iron/DI
25 to 200 mmPN 1.0,
1.6, 2.0 & 2.5
Double Acting
Temper Proof
Without ISI mark
As per AWWA C-
512-92CS/S.G. Iron/DI
7M/s. Calsens Pvt. Ltd.,
Howrah
Unit-I, Calsens Pvt. Ltd.,40/1, Makardah Road, Howrah-711101
[email protected] to 200 mm
PN 1.0 & 1.6
DS1, DS2 & DK
Without ISI mark
31/12/2019(renewed for
2 years)-
upto 200 mmPN 16, PN
20 , PN 30
upto 250 mm PN 10
upto 200 mm PN 4.0
upto 40 mmPN 1.0 &
1.6S1
upto 50 mmPN 1.0 &
1.6S2
50 to 200 mmPN 1.0 &
1.6DS2 & DK
15 to 80 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper
ProofWithout ISI
mark
As per AWWA C -
512
6M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
31/12/2019(renewed for
2 years)
Resilient Seated
SG iron/ Cast steel
-
9M/s. Upadhaya valves
Manufacturers Pvt. Ltd., Kolkatta
P 280 Benaras road, [email protected]
[email protected]@upadhayavalves.net
With ISI mark
31/12/2019(renewed for
2 years)
10M/s. Bikaner Engineering
Works, Jaipur
F-445, Road No. 12, V.K.I. Area, Jaipur-302013
31/12/2019(renewed for
2 years)
8M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri,
Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
KineticWithout ISI
mark
31/12/2019(renewed for
2 years)
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
15 to 80 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Temper
ProofWithout ISI
mark
As per AWWA C -
512
25 to 50 mmPN 1.0 &
1.6Single Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Double Acting
Without ISI mark
40 to 200 mmPN 1.0 &
1.6Kinetic
Without ISI mark
13M/s. Fouress Engineering
(I) Ltd., Aurangabad
C-2, MIDC industrial Area, Paithan, Dist. Aurangabad- 431148
[email protected]@fouressind.com
up to 300 mmUp to PN
2.5-
Without ISI mark
31/12/2018 DELETED
14M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade, Pune-412114
[email protected] to 400 mm
Up to 24 kg/sqcm
-Without ISI
mark
31/12/2020(Renewed for
2 yrs)-
15M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 200 mmUp to PN
1.6-
Without ISI mark
30/06/2019(Approval for
3 years)-
16M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-144004, Punjab
[email protected] to 200 mm
Up to PN 1.6
-Without ISI
mark
30/06/2019(Approval for
3 years)-
17M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711 108
[email protected] to 200 mm - -
Without ISI mark
30/11/2019(Approval for
3 years)-
15 to 40 mmPN 1.0 &
PN 1.6S1
25 to 50 mmPN 1.0 &
PN 1.6S2
40 to 200 mmPN 1.0 &
PN 1.6DK Type
40 to 200 mmPN 1.0 &
PN 1.6DS1
40 to 200 mmPN 1.0 &
PN 1.6DS2
15 to 200 mmPN 2.0 &
PN 2.5-
Without ISI mark
19M/s. Kalpana valves
Manufacturing co. (P) Ltd., Howrah
Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113
[email protected] to 150 mm PN 1.0 -
Without ISI mark
30/06/2020(Approval for
3 years)
20M/s. Shree Balaji
Industries, Howrah
Shibtala, Kalitala, Baltikuri, Howrah, West Bengal-711105
[email protected] to 200 mm
Up to PN 1.6
- With ISI mark30/06/2020
(Approval for 3 years)
-With ISI mark
18M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
-
11M/s. Shiva Industries,
Jaipur
-
Plot No. 2632, GIDC Lodhika, Metoda, Rajkot-360021
31/12/2019(renewed for
2 years)
30/11/2019(Approval for
3 years)
Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara,
31/12/2019(renewed for
2 years)
12M/s. G.M. Engineering
Pvt. Ltd., Rajkot
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
21
M/s. Rotex Manufacturers &
Engineering Pvt. Ltd., Thane (Maharashtra)
Manpada Road, Near Bhopar Village, Dombivli (E), Dist. Thane, Maharshtra
[email protected]@rotexindia.com
Up to 200 mmUp to PN
25-
Without ISI mark
30/06/2020(Approval for
3 years)
40 to 200 mmPN 1.0 &
PN 1.6S1, S2, DS1, DS2 & DK
With ISI mark -
Up to 200 mmUp to PN
2.5Temper
ProofWithout ISI
mark
As per AWWA C -
512
23M/s. Sigma Flow Control
India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-711 403
[email protected] to 200 mm -
Temper Proof
Without ISI mark
06/03/2021(Approval for
3 years)
As per AWWA C -
512
24M/s. Mac International,
Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-144004
[email protected]@nvrfittings.com
15 to 200 mmUp to PN
1.6-
Without ISI mark
06/03/2021(Approval for
3 years)
50 to 200 mmPN 1.0 &
PN 1.6- With ISI Mark
25 to 40 mmPN 1.0 &
PN 1.6-
Without ISI mark
50 to 200 mmPN 1.0 &
PN 1.6Temper
ProofWithout ISI
mark
As per AWWA C -512
15 to 40 mmPN 1.0 &
PN 1.6S-1
25 to 50 mmPN 1.0 &
PN 1.6S-2
40 to 200 mmPN 1.0 &
PN 1.6DS-1, DS-2 ,
DK
40 to 200 mmUp to PN
1.6
Temper Proof
(Kinetic Type)
Without ISI mark
As per AWWA C -
512
40 to 200 mmPN 1.0 &
PN 1.6DK Type With ISI mark
40 to 200 mmUp to PN
1.6-
Without ISI mark
40 to 300 mm PN 1.0Temper
ProofWithout ISI
mark
As per AWWA C -
512
Up to 200 mmPN 1.0 &
PN 1.6-
Without ISI mark
DI
Up to 200 mmPN 1.0 &
PN 1.6Temper
ProofWithout ISI
mark
DI (As per AWWA C -
512)
15 to 25 mm PN 1.0 Single ActingWithout ISI
mark
40 to 200 mmUp to PN
1.6DS1, DS2 &
KineticWithout ISI
mark
Up to 200 mmUp to PN
1.6
Temper Proof
(kinetic)
Without ISI mark
26M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-711323
06/03/2021(Approval for
3 years)
With ISI mark
06/03/2021(Approval for
3 years)
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-711402
[email protected]@[email protected],
M/s. G.M. Dalui & Sons (Pvt.) Ltd., Howrah
25
30/06/2020(Approval for
3 years)22
M/s. Jupiter Engineering Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
M/s. Durga Valves PVt. Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104, West Bengal
[email protected], [email protected]
2706/03/2021
(Approval for 3 years)
-69A, Balitikuri Industrial Estate, Howrah-
M/s. Indian Valve International, Howrah
29
28M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
06/03/2021(Approval for
3 years)
06/03/2021(Approval for
3 years)
Size (mm) Class
1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to Date
RemarksISI MarkType
40 to 200 mmUp to PN
1.6DS 1, DS 2 &
DKWith ISI mark
15 to 200 mmUp to PN
1.6Single & Double
Without ISI mark
40 to 150 mmUp to PN
1.6Temper
Proof Without ISI
mark
31M/s. Bir Industries,
Jalandhar
G.T. Road, Bye Pass, Maqsoodan, Jalandhar-144008
[email protected] to 200 mm
PN 1.0 & PN 1.6
Temper Proof
Without ISI mark
06/03/2021(Approval for
3 years)
As per AWWA C -
512
15 to 200 mmPN 1.0 &
PN 1.6- With ISI mark
06/03/2021(Approval for
3 years)
Up to 200 mmUp to PN
2.5Temper
Proof Without ISI
mark
06/03/2021(Approval for
3 years)
As per AWWA C -
512
Up to 50 mmUp to PN
1.6Screwed
SingleWithout ISI
mark
Up to 200 mmUp to PN
1.6Flanged Double
Without ISI mark
34M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage, Kurichi, Coimbatore-
641021, [email protected]@gmail.com
Up to 200 mmUp to PN
1.0-
Without ISI mark
11/02/2022(Approval for
3 years)
15 to 200 mmPN 1.0 &
PN 1.6- With ISI mark
Up to 200 mm -Temper
proofWithout ISI
mark
33M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -144012
[email protected]@aarko.in
11/02/2022(Approval for
3 years)
M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711108
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
35M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, Howrah-711108
11/02/2022(Approval for
3 years)
06/03/2021(Approval for
3 years)
As per AWWA C -
512
M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
30
Size (mm) Class1 2 3 4 5 6 7 8 9
15 mm to 600 mm
150# to 2500#
SluiceWithout ISI
mark
15 mm to 600 mm
150# to 2500#
ConduitWithout ISI
mark
upto 700 mm 150# -
Up to 500 mm
300# & 600#
-
Up to 100 mm
900# -
3M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road,
50 to 300 mm
- SluiceWithout ISI
mark
31/12/2020(Renewed for
2 yrs)-
4M/s. Fouress
Engineering (I) Ltd., Banglore
Plot-2, Phase-II, Peanga Industrial Area, Banglore-
50 to 3600 mm
Up to PN 16 (16
bar)Knife Edge
Without ISI mark
31/12/2020(Renewed for
2 yrs)-
5M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 300 mm
Up To PN 1.6
Knife EdgeWithout ISI
mark
30/06/2019(Approval for
3 years)-
6M/s. Orbinox India Pvt.
Ltd., Coimbatore
S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641
[email protected]@orbi
nox.com
50 to 1200 mm
- Knife EdgeWithout ISI
mark
30/06/2019(Approval for
3 years)-
7M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
40 to 1000 mm
PN 1.0 & PN 1.6
Knife EdgeWithout ISI
mark
30/11/2019(Approval for
3 years)-
8M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
Up to 800 mm
PN 1.0 Knife EdgeWithout ISI
mark
30/06/2020(Approval for
3 years)
as per MSS SP -81 / AWWA C520
Class AS per API Standard1
M/s. GM Engineering , Rajkot
Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021
31/01/2019(5 years approval
over)
31/12/2019(Renewed for
2 years)
As per API 600(SG Iron/ Cast
steel)2
M/s. Kirloskar Brothers Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no.
252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune, [email protected]
[email protected]@kbl.co.in
Without ISI mark
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Gate Valves as per Vendor Selection Report submitted by
Different TPI (As on dt. 15-5-2019)Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to RemarksType ISI Mark
Size (mm) Class1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class Approval
Valid up to RemarksType ISI Mark
9M/s. Sigma Flow Control
India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-
40 to 1000 mm
-Resilient Seated
Without ISI mark
06/03/2021(Approval for
3 years)-
10M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
50 to 1200 mm
Up to PN 1.6
Knife EdgeWithout ISI
mark
06/03/2021(Approval for
3 years)-
11M/s. Durga Valves PVt.
Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104,
West [email protected],
Up to 900 mm
PN 1.6 Knife EdgeWithout ISI
mark
06/03/2021(Approval for
3 years)as per MSS SP -81
12M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -
[email protected]@aarko.in
Up to 1000 mm
Up to PN 1.6
Resilient Seated
(DI)
Without ISI mark
11/02/2022(Approval for
3 years)as per BS 5163
13M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
up to 1200 mm
Up to PN 2.5
Knife EdgeWithout ISI
mark
11/02/2022(Approval for
3 years)
As per AWWa C520-10 & MSS
Sp 81
14M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
up to 1200 mm
- -Without ISI
mark
11/02/2022(Approval for
3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size Class1 2 3 4 5 6 7 8 9
1M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,
Up to 1500 x 1500 mm
PN 0.6 to 3.0
Sluice (Single faced
circular/Rectangular
Without ISI mark
31/12/2019(Renewed for
2 years)
As per BS 5155-593/ AWWA C
504
2M/s. Jash Engineering Ltd., Indore (Unit-II)
Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo
Hospital, sanwer Road, Indore-453111 (MP)
150 x 150 mm to 3000 x 5000 mm
- -Without ISI
mark
31/12/2019(Renewed for 2 years)
As per IS 13349
3M/s. S & M Industrial Valves Ltd., Kolkata
Sadananda Industrial Estate, Balitikuri, Bakultala,
Howrah-711 [email protected]
Up to 1200 x 1200 mm
- Sluice Without ISI
mark
30/06/2019(Approval for 3 years)
-
4M/s. Bharat Industrial corporation, Ghaziabad (UP)
D-131, Industrial Area, Bulandshahr Road, Ghaziabad-
201 009, Uttar [email protected]
Up to 2500 x 3000 mm
- SluiceWithout ISI
mark
30/06/2019(Approval for 3 years)
As per IS 13349
5M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
Up to 2000 mm
III SluiceWithout ISI
mark
30/06/2020(Approval for 3 years)
As per IS 13349
6M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
150 x 150 mm to 1500 x 1500 mm
Up to PN 1.6
SluiceWithout ISI
mark
06/03/2021(Approval for 3 years)
7M/s. Durga Valves PVt.
Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104,
West [email protected],
2400 mm x 2800 mm
- SluiceWithout ISI
mark
06/03/2021(Approval for 3 years)
As per IS 13349
8M/s. Indian Valve
International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
Up to 1200 mm x 1200
mm- Sluice
Without ISI mark
06/03/2021(Approval for 3 years)
As per IS 13349
9M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
800 mm x 800 mm
- SluiceWithout ISI
mark
06/03/2021(Approval for 3 years)
As per IS 13349
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Sluice Gate as per Vendor Selection Report submitted by TPI (As on
dt. 15-5-2019)Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Type ISI MarkApproval Valid
up to Date Remarks
Size Class1 2 3 4 5 6 7 8 9
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Class
Type ISI MarkApproval Valid
up to Date Remarks
10M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 1800 x 1900 mm
Up to PN 1.0
SluiceWithout ISI
mark
11/02/2022(Approval for 3 years)
As per IS 13349
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8
6 mm to 700 mm
150# to 900#
Without ISI mark
31/01/2019(5 years Approval
over)
Class AS per API Standard
50 to 1500 mm
PN 1.6Without ISI
mark
31/12/2019(Renewed
for 2 years)
Dual plateAs per API 594
2M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant-I)
Plant I- A 1/17, GIDC, Pardi, Dist. Valsad, [email protected]@gmail.com
50 to 1000 mm
PN 0.6 to 3.0
Without ISI mark
31/12/2019(Renewed for 2 years)
Dual plateAs per API 594
1000 to 2400 mm
PN 0.6 to 3.0
Without ISI mark
Dual plateAs per API 594
600 to 1200 mm
PN 0.6 to 3.0
Without ISI mark
Multi Door
4M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, [email protected]
50 to 2000 mm
PN 1.0, 1.6, 2.0 &
2.5
Without ISI mark
31/12/2019(Renewed for 2 years)
Dual plate (Double Flange)As per API 594
upto 1500 mm
PN 6
upto 1100 mm
PN 10
upto 1500 mm
PN 16
upto 900 mm
PN 20
upto 600 mm
PN 40
upto 750 mm
150# & 300#
upto 300 mm
600#
upto 100 mm
900#
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Check Valves as per Vendor Selection Report
submitted by Different TPI(As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail AddressApproved Size & Approval
Valid up to Date
RemarksISI Mark
31/12/2019(Renewed
for 2 years)
5M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist.
Pune, [email protected]
[email protected]@kbl.co.in
Without ISI mark
31/12/2019(Renewed
for 2 years)
1M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-360021
3M/s. R & D Multiples (Metal Cast) Pvt. Ltd.,
Valsad (Plant -2)
Plant no. II, Survey No. 304, Village Balada, pardi, Valsad,
Dual plateAs per API 594 (SG Iron/ Cast
steel)
Without ISI mark
Check valveBS:-1868
50 to 500 mm
PN 1.0 & PN 1.6
Without ISI mark
31/12/2019(Renewed
for 2 years)
Dual PlateAs per API 594
600 to 700 mm
PN 1.0 & PN 1.6
Without ISI mark
30/06/2020(Approval
for 3 years)
Dual PlateAs per API 594
up to 800 mm
up to PN 1.6
Without ISI mark
up to 1300 mm
up to PN 1.6
Without ISI mark
8M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar Road,
15 to 100 mm
-with ISI
mark
31/12/2020(Renewed for 2 yrs)
As per IS 778
9M/s. Sondhi
Industries,Jalandhar
C-9 & C-11, Canal Road, Insustrial Area, Jalandhar-
144004, [email protected]
Up to 400 mm
-Without ISI
mark
30/06/2019(Approval
for 3 years)
Dual Plate AS per API 594 &
598
10M/s. Orbinox India Pvt.
Ltd., Coimbatore
S.F. No.680/3A2B, 608/3A1B, Eachanari-Chettipalayam Road, Eachanari Post, Coimbtore-641
[email protected]@orbin
ox.com
50 to 800 mm
-Without ISI
mark
30/06/2019(Approval
for 3 years)-
11M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711 108
50 to 700 mm
-Without ISI
mark
30/11/2019(Approval
for 3 years)
Dual Plate AS per API 594
12M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, Ahmedabad
[email protected]@hawaengltd.com
2100 to 2400 mm
PN 1.0 & PN 1.6
Without ISI mark
30/11/2019(Approval
for 3 years)
Dual Plate
13M/s. Kalpana valves
Manufacturing co. (P) Ltd., Howrah
Balitikuri, Ghosh Para, P.O. Balitikuri, Howrah-711113
Up to 600 mm
up to PN 1.6
Without ISI mark
30/06/2020(Approval
for 3 years)
Dual Plate AS per API 594 &
598
14M/s. Shree Balaji
Industries, Howrah
Shibtala, Kalitala, Baltikuri, Howrah, West [email protected]
Up to 600 mm
up to PN 1.6
Without ISI mark
30/06/2020(Approval
for 3 years)
Dual Plate AS per API 594 &
598
15M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
Up to 1400 mm
Up to PN 2.5
Without ISI mark
30/06/2020(Approval
for 3 years)
Dual Plate AS per API 594
16M/s. Sigma Flow Control
India Ltd., Kolkata
Chatterjee Industrial Estate, Bankra, Jhilpar, Domjur, Howrah-
50 to 300 mm
-Without ISI
mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
17M/s. Mac International,
Jalandhar
Industrial Enclave, V.P.O. Randhawa Masandan, Jalandhar-
50 to 450 mm
Up to PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
18M/s. G.M. Dalui & Sons
(Pvt.) Ltd., Howrah
Vivekanand industrial estate, Balitikuri, Bakultala, Howrah-
711402 [email protected]
[email protected]@gmail.com,
Up to 3000 mm
Up to PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
7M/s. Fouress Engineering
(I) Ltd., Aurangabad
C-2, MIDC industrial Area, Paithan, Dist. Aurangabad-
31/12/2018 DELETED
6M/s. Shiva Industries,
Jaipur
Kh. No.:- 518, Near Vaidh Ji ka Chouraha, Newaroo Road, Jhotwara, [email protected]
19M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
50 to 1200 mm
Up to PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
20M/s. Durga Valves PVt.
Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104,
West [email protected],
50 to 1400 mm
Up to PN 2.0
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
21M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-641062
50 to 700 mm
PN 1.0, PN 1.6 &
PN 2.5
Without ISI mark
06/03/2021(Approval
for 3 years)
DI Dual Plate AS per API 594
22M/s. Indian Valve
International, Howrah
69A, Balitikuri Industrial Estate, Howrah-711113
50 to 1200 mm
Up to PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
23M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West Bengal
[email protected]@vsnl.net
50 to 800 mm
Up to PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
24M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711108
Up to 900 mm
Up to PN 2.5
Without ISI mark
06/03/2021(Approval
for 3 years)
Dual Plate AS per API 594
25M/s. Aarko
Manufacturing co., Jalandhar
75, Industrial Estate Extention, Behind Sharp Chucks, Jalandhar -
[email protected]@aarko.in
up to 300 mm
Up to PN 1.6
Without ISI mark
11/02/2022(Approval
for 3 years)
Dual Plate AS per API 594
26M/s. V-Tork Controls,
Coimbatore
SF 652/4A, SIR C.V. Raman Layout, Near Rathinam Collage,
Kurichi, Coimbatore-641021, Tamilnadu
[email protected]@gmail.com
Up to 80 mm
Up to PN 1.6
Without ISI mark
11/02/2022(Approval
for 3 years)
Dual PlateAs per API 594
27M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
Up to 1000 mm
Without ISI mark
11/02/2022(Approval
for 3 years)Dual Plate
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Approved Size
Size (mm)
1 2 3 4 5 7 8 9
Zero Velocity100 mm to 2400
mm-
Air cushion valve 100 to 300 mm -
Zero velocity valve (PSLC)
500 to 2350 mm -
Air Cushion valves (QRDA)
100 to 400 mm -
Zero Velocity Up to 2700 mmup to 30 kg./sqcm
Air cushion valve up to 400 mmup to 30 kg./sqcm
Zero Velocity Up to 1000 mm up to 2.5
Air cushion valve up to 300 mm up to 1.6
Zero Velocity Up to 1400 mm up to PN 1.6
Air cushion valve up to 300 mm up to PN 1.6
Zero Velocity Up to 1000 mm up to PN 2.5
Air cushion valve up to 200 mm up to PN 2.5
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Water Hammer Devices (Zero Velocity Valves & Air cushion valves) as per Vendor Selection Report submitted by TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail Address Type of Valves ISI MarkApproval
Valid up to Date
Remarks
1M/s Jash Engineering Ltd., Indore (Unit-II)
Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind Aurobindo
Hospital, sanwer Road, Indore-453111 (MP)
31/12/2019(Renewed
for 2 years)-
2M/s. Megha Engineering
& Infrastructure Ltd., Hyderabad
Plot No. 34/B, IDA Jeedimetla, Hyderabad-500055, AP
[email protected]@meil.in
31-12-2017 DELETED
3M/s. Flownix valves Pvt.
Ltd., Pune
Gate no.1, Plot No. 24, Atul Industrial Premises, Talawade,
31/12/2020(Renewed for 2 yrs)
-
4M/s. Jupiter Engineering
Co., Howrah
Kashi pur, Das nagar, Howrah-711105 (WB)
30/06/2020(Approval for
3 years)
06/03/2021(Approval for
3 years)5
M/s. Durga Valves PVt. Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711 104,
West [email protected],
06/03/2021(Approval for
3 years)6
M/s. Shree Krishna Industries, Howrah
P-261/1, Benaras Road, Belgachia, Howrah-711108
7M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
Zero Velocity Valve
Up to 900 mm -11/02/2022
(Approval for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Sr. No.
Name of Agency Adress/E-mail Address Approved Size & ClassApproval
Valid up to Date
Remarks
1 2 3 4 5 6
1M/s. Cair Euromatic
Automation Pvt. Ltd., Ahmedabad
Plot No. 178/179, Shiv Shakti Estate, Nr. V-Trans, Narol Road, Ahmedabad-
(A) Rotary Electrical Actuators:- Rotary Electrical Actuator for AWWA Butterfly Valve Double flanged, High-Performance Butterfly valve, Ball vale, 2-way ball valve, 3-way ball valve, and rotary Electrical Actuator for 4-way ball valve, fire safe design ball valve, fabricated butterfly valve
(B) Multi-turn Electrical Actuators:- Multi turn actuator operated sluice valve double flanged, gate valve double flanged, knife-gate valve, globe valve, control valve
Item Range:- (i) Three phase, single phase electrical actuators quarter turn (WP & Ex proof) Torque range:- 35 NM to 5000 NM (ii) Multi turn electrical actuators (WP & Flame proof) torque range;- 100 NM to 24000 NM(iii) Single phase electrical actuators (Linear) torque range:-150 kgf to 2500 kgf
31-1-2019(5 years
Approval over)
2M/s. Rotork Control (I)
Pvt. Ltd., Chennai
28-B, Ambattur Industrial Estate (North) Chennai-
mkumar.mahalingam@rotor
k.com
(A) Single Phase Actuator with electrically operated and remotely controlled quarter turn & multi turnCapacity:- 30 Nm to 300 Nm (3 kgm to 30 kgm)(B) Three Phase Actuators with electrically operated and remotely controlled quarter turn & multi turn Capacity:- 30 Nm to 1000 Nm (3 kgm to 102 kgm)
31-12-2019(Renewed for 2 years)
-
3M/s. Auma India Pvt.
Ltd., Banglore
Plot no. 39-B Phase, Pennya Industrial Area,
Electric Actuators:-(a) Range From 30 Nm to 1000 Nm(b) 2000 Nm to 16000 Nm with electronic control. (Optional)
31/12/2020(Renewed for 2 yrs)
-
4M/s. Marsh Automation
Pvt. Ltd., Pune
98A/25A, Hadapsar Industrial Estate, Pune-411
013rsdeshpande@marshauto
Three Phase Electrical Actuators of Torque Output Upto:- 1000 NM
03/06/2021(Approval for 3 years)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Motorized Valve Actuators as per Vendor Selection Report
submitted by Different TPI (As on dt. 15-5-2019)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Size (mm) Class
1 2 3 4 5 6 7 8 9
1M/s. Kartar Valves Pvt.
Ltd., Jalandhar
Village Variana, Kapurthala Road, P.O. Nagra, Jalandhar-
Ball Valve15 to 100
mmCL-125 &
CL-250With ISI mark
31/01/2019(5 years Approval
over)
Ball Valve6 mm to 300
mm150# to 2500#
Ball Valve6 mm to 600
mm150# to
600#
Globe Valve15 mm to 300 mm
150# to 900#
Strainer Valve15 mm to 300 mm
-
Plug valve15 mm to 200 mm
150#
Needle Valve6 mm to 50
mm150# to
900#
Floating Ball Valve 15 to 300
mm600#
Without ISI mark
AS per API 609
Trunnion Mounted Ball
vales
up to 400 mm
600#Without ISI
mark
AS per API 609
upto 600 mm
PN 0.2
up to 400 mm
PN 1.0
upto 200 mm125#
upto 500 mm150#
upto 200 mm300#
2M/s. GM Engineering ,
Rajkot
Plot No.2632, GIDC, Lodhika, village- Metoda, Rajkot-
31/01/2019(5 years Approval
over)
AS per API Standard
Without ISI mark
3M/s. Delval Flow
Controls Pvt. Ltd., Pune
GAT No. 25+37+43/1A, At-Kavathe, Post Javale, Taluka
Khandala, District-Satara-412801
31/12/2019(Renewed
for 2 years)
4M/s. Kirloskar Brothers
Ltd., Pune
Kirloskar Brothers Ltd., Valve Business Unit, Gate no. 252/253, Kondhapuri, Taluka-Shirpur, Dist. Pune,
Foot valveWithout ISI
mark
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGAR
List of Approved Vendors of GWSSB for supply of Other Valves as per Vendor Selection Report submitted by Different TPI (As on dt. 15-5-2019)
Sr. No.
Name of Agency Adress/E-mail Address
Approved Size & Class Approval Valid up to
Date Remarks Type of Valves ISI Mark
CI/ S.G. Iron / Cast steel As per IS:
4038
Globe valveWithout ISI
mark
As per BS: 1873 ( CI/ SG Iron /
Cast Steel)
31/12/2019(Renewed
for 2 years)
Pressure Relief valves/ Safety
Valves
Up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Pressure Reducing valve
up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Float Valvesup to 600
mmPN 0.6 to
PN 3.0Without ISI
mark
Pressure Sustaining Valves
up to 600 mm
PN 0.6 to PN 3.0
Without ISI mark
Ball valve15 to 100
mmWithout ISI
mark
Gun metal Gate valve, Globe valve
15 to 100 mm
With ISI markAs per IS
778
7M/s. Perfect Valves PVt.
Ltd., Jalandhar
Waryana Industrial Complex, Sangal Sohal Road, Adjoining Leather Complex,
Ball valve 1/2" to 4" Class 125 With ISI mark31/12/2020(Renewed for 2 yrs)
AS per IS 9890:1981
8M/s. Hawa Engineering
Ltd., Ahmedabad
129, B/h. Kashiram Textile mill, Narol road, [email protected]
Foot valve15 to 600
mm
PN 1.0. PN 1.6 &
PN 2.0
Without ISI mark
30/11/2019(Approval
for 3 years)-
9
M/s. Rotex Manufacturers &
Engineering Pvt. Ltd., Thane (Maharashtra)
Manpada Road, Near Bhopar Village, Dombivli (E),
Dist. Thane, [email protected]@rotexindia.com
Ball ValveUp to 600
mmUp to PN
21Without ISI
mark
30/06/2020(Approval
for 3 years)-
10M/s. Kejriwal Castings
Ltd., Howrah
MH-6 Chamrail, Near Kona Express Highway, Howrah-
Foot valve50 to 1200
mmup to PN
1.6Without ISI
mark
06/03/2021(Approval
for 3 years)
Pressure RElief valves
up to 200 mm
up to PN 1.6
Without ISI mark
Float Valvesup to 200
mm-
Without ISI mark
12M/s. McWane Services Pvt. Ltd., Coimbatore
143/2A, Anna Nagar Road, Neelambur, Coimbatore-
m
Pressure RElief valves (Flow
Control Valve)
Up to 300 mm
PN 1.0 & PN 1.6
Without ISI mark
06/03/2021(Approval
for 3 years)DI
06/03/2021(Approval
for 3 years)11
5M/s. Aira Euro
Automation Pvt. Ltd., Ahmedabad
Plot no. 123-124, Aira Estate, B/h. Security Estate, Nr. Kashiram Textile Mills, Narol Road, Ahmedabad-
380 028airaeuroautomation@gmail
.com
31/12/2020(Renewed for 2 yrs)
31/12/2020(Renewed for 2 yrs)
6M/s. Zoloto Industries,
Jalandhar
Zoloto house, 11th Milestone, Lambra, Nakodar
Road, [email protected]
M/s. Durga Valves PVt. Ltd., Howrah
Ichhapur road, Canal Side, Santragachi, Howrah-711
104, West [email protected],
13M/s. Kamala Valves & Engineering Pvt. Ltd.,
Howrah
41/2. "Q" Road, Belgachia, Howrah-711108, West
Float ValvesUp to 300
mm-
Without ISI mark
06/03/2021(Approval
for 3 years)
Flow Control valveup to 400
mm150# &
300#Without ISI
mark
Altitude Control valve
up to 400 mm
150# & 300#
Without ISI mark
Altitude cum Flow Control Valve
up to 400 mm
150# & 300#
Without ISI mark
Flow Cum Pressure Control
Valve
up to 400 mm
150# & 300#
Without ISI mark
Pressure reducing Valve
up to 400 mm
150# & 300#
Without ISI mark
Liquid Service Relief Valve
up to 400 mm
150# & 300#
Without ISI mark
Ball ValveS/E
15 to 100 mm
150 & 250 With ISI mark
Ball ValveF/E
15 to 150 mm
150 & 250 With ISI mark
Foot valveScrewed
Up to 150 mm
Up to PN 1.0
Without ISI mark
Foot Valve Flanged
Up to 300 mm
Up to PN 1.0
Without ISI mark
26M/s. Kamala Valves
Manufacturing Concern, Howrah
31/2, Y road, Belgachia, Kazipara, [email protected]
Pressure reducing Valve
50 to 300 mm
-Without ISI
mark
11/02/2022(Approval
for 3 years)
14M/s. Darling Muesco
(India) Pvt. Ltd., Ahmedabad
Plot no. 97/A, Phase-1, GIDC, Vatva, Ahmedabad-
11/02/2022(Approval
for 3 years)
IS 989075, Industrial Estate Extention, Behind Sharp
Chucks, Jalandhar [email protected]@aarko.in
M/s. Aarko Manufacturing co.,
Jalandhar25
11/02/2022(Approval
for 3 years)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.
Sr. No.
Name of Agency Adress/E-mail Address Approved Size & ClassApproval
Valid up to Date
Remarks
1 2 3 4 5 6
1M/s Jash Engineering Ltd., Indore (Unit-II)
Jash Engg. Ltd., Unit-II, Survey No.74, Bardari, Road, Gram Bardari, Behind
Aurobindo Hospital, sanwer Road, Indore-453111 (MP)
Screens:- (i) Fine & Course Multi Rake Course Bar: 1 to 100 MLD(ii) Track rack screen
31-12-2019(Renewed
for 2 years)
2
M/s. Gardner Denver Engineered Products India pvt. Ltd., Ahmedabad
Plot No.878, Opp. Gallops Industrial Park, Sarkhej-Bavla Road, Village;- Rajoda, Bavla, Ahmedabad-382220krutesh,[email protected]@gardnerdenver.com
Air Blower:- Screw Type And Tri-Lobe Type11/02/2022(Approval for 3 years)
3M/s. Jash Engineering Ltd., Indore
Survey No. 74, Gram Bardari, Near Sanwer Road, Sanwer, Indore-452015
(1) Grit Seperator (Detritor):- 10.5 m dia x 10.5 m x 1.5 m depth(2) Thickener (Sludge Thickener):- 26 m dia x 3.5 m depth
11/02/2022(Approval for 3 years)
4M/s. Micro
Transmission Systems, Uttar Pradesh
C-23, Sector 85, Noida, Gautam Budh Nagar-201305, Uttar [email protected]
(1) Screens:- Coarse Mechanical upto 1.600 m width x 10.8 m deep & fine up to 1.6 m x 3.6 m deep(2) Detritor/Grit Seperator:- upto 10.0 m x 10.0m x 1.0 m deep(3) Thickener (sludge Thickener):- upto 11 m dia x 4.0 m depth(4) Sludge Dewatering machine:- upto 60 meter cube per hour
11/02/2022(Approval for 3 years)
5M/s. Triveni
Engineering & Industries Ltd., Noida
Water Business Group, A-44, Hosiery Complex, Phase-II Extn., Noida-201305,
Uttar [email protected]
(1) Screens:- Coarse Mechanical upto 4.1 m width x 2.3 m deep (2) Detritor/Grit Seperator:- upto 13.0 m x 10.0 m x 1.0 m deep(3) Thickener (Sludge Thickener) :- upto 20.3 m dia x 4.0 m depth
11/02/2022(Approval for 3 years)
6M/s. Apollo Screens PVt. LTd., Chhatral (Gandhinagar)
Plot No. B-8 & 9, Dharti Apollo Ind Park, Chhatral- Kadi Road, Chhatral, [email protected]@apolloscreens.com
(1) Screens:(i)Fine mechanical screen step type(ii)) Fine mechanical screen multi rack bar type(iii) Fine manual screen(iv) Multi rack bar screen for deep chaneel(v) Coarse manual screen(vi) Rotary drum screen(vii) Static Screen(viii) MBBR Screen for media retention(2) sludge thickener(3) Grit Seperator/ Detritor
11/02/2022(Approval for 3 years)
7M/s. Aqseptence Group (I) Pvt. Ltd., Ahmedabad
Plot No. E-540, GIDC, Sanand -II Industrial Estate, Village:- Bol, Sanand, [email protected]
(A) Screens:-(i) Coarse screen Mechanical & Manual(ii) Fine screen Mechanical & Manual(B) Vortex grit Separator
11/02/2022(Approval for 3 years)
8M/s. Purchure
Engineers Pvt. Ltd., Pune
Plot no. C 4-23 MIDC Jejuri, Village:- Jejuri, Taluka:- Purandar, Pune,
(A) Sluice Gate: 2.4 m x 2.6 m(B) Screens:-(i) Mechanical Fine Screen:- 3.6 m x 1.55 m(ii) Mechanical Coarse screen :- 9.5 m x 0.5 m(iii) Manual Bar Screen: 3.6 m x 1.5 m(C) Thickener:- 6.5 m dia x 2.5 m depth(D) Grit Seperator:- 0.4 m dia Screw x 10 m (L)
11/01/2022(Approval for 3 years)
GUJARAT WATER SUPPLY & SEWERAGE BOARD, GANDHINAGARList of Approved Vendors of GWSSB for supply of Different STP items as per Vendor Selection Report submitted by Different TPI
(As on dt. 15-5-2019)
Note:- It is advisable to use this information as a reference only & kindly confirm it with concern authority before use.