Guide to help choose Grouts and Flexible Joints · 2011-01-18 · Guide to help choose Grouts and...
Transcript of Guide to help choose Grouts and Flexible Joints · 2011-01-18 · Guide to help choose Grouts and...
CEMENTITIOUS GROUTS
Residential
Industrial
Commercial
Mapei has a complete range of grouts for all types of internal and external
ceramic, cotto, stone and glass mosaic floors and coatings.
For example, cementitious grouts are particularly suitable for residential use
such as bathrooms, kitchens, swimming pools, external façades, balconies and
terraces, for commercial environments such as grouting tiles in supermarkets,
restaurants, airports and public buildings and for floors in industrial environments.
CEMENTITIOUS GROUTS▶ High-performance mortar for joints from 2 to
20 mm▶ Anti-efflorescence and anti-mould (BioBlock®)▶ Water-repellent (DropEffect®)▶ Polymer-modified▶ Available in 26 different colours▶ For internal and external use
▶ For all types of ceramic, stone, glass mosaic and marble floors and coatings
▶ High-performance mortar for joints up to 6 mm
▶ Water-repellent (DropEffect®)▶ Polymer-modified▶ Available in 18 different colours▶ For internal and external use
▶ For all types of ceramic, stone, glass mosaic and marble floors and coatings
▶ High-performance mortar for joints up to 4 mm
▶ Smooth, white, compact and super fine
▶ Polymer-modified▶ For internal and external use
▶ For all types of pre-polished ceramic, terracotta, glass mosaic, stone and marble floors and coated surfaces
▶ Ideal for grouting thin joints
▶ High-performance mortar for joints from 4 to 15 mm
▶ Polymer-modified▶ Available in 18 different colours▶ For internal and external use
▶ For all types of ceramic, terracotta, natural brick and stone floors and coatings
CEMENTITIOUS GROUTS
01
▶ Ready-to-use paint to rejuvenate the colour of cementitious grouts
▶ Available in 26 different colours
▶ High-performance mortar for joints from 4 to 20 mm
▶ High mechanical strength▶ Available in cement dark grey▶ For internal and external use
▶ For ceramic, terracotta, and stone floors, including those subject to heavy loads
▶ Liquid polymer admix for Keracolor FF and Keracolor GG
▶ Acid-based cleaning solution for ceramic tiles with cementitious joints
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
EPOXY GROUTS
Residential
Industrial
Commercial
Thanks to their technical characteristics, the range of grouting materials for epoxy
joints is particularly suitable when particular requirements for hygiene and
resistance to aggressive chemicals are required.
They are used, therefore, in residential and commercial environments to
guarantee a highly attractive and decorative finish along with their good
performance figures, and in all industrial environments where very high resistance
to chemicals and high strength are required, together with resistance to acids
and hydrocarbons, such as for floors in the foodstuffs industries (meat factories,
oil mills, etc.).
02
EPOXY GROUTS▶ Two-component anti-acid mortar for joints of at
least 3 mm▶ Very high strength and chemical resistance▶ Resistance to oily acids and aromatic
hydrocarbons, including at high temperatures
▶ Smooth, compact, non-absorbent, easy-to-clean surface
▶ Available in colours 113 and 130 from the standard range
▶ For ceramic floors in the foodstuffs industries (ham curers, meat factories, oil mills, etc.)
EPOXY GROUTS
03
▶ Two-component anti-acid mortar for joints of at least 2 mm
▶ Very high strength and chemical resistance▶ Excellent workability and easy to clean▶ Excellent resistance to heavy traffic▶ Available in colours 113, 114 and 132 from
the standard range and the special colours bardiglio grey (282), sea blue (283) and cream (290)
▶ For industrial ceramic floors and coatings where high strength and a high level of hygiene are required
▶ Two-component anti-acid mortar for joints of at least 3 mm
▶ Very high strength and chemical resistance
▶ Suitable for large surfaces▶ Easy to apply by trowel▶ Available in colours 113 and 130 from the
standard range
▶ For industrial ceramic floors and coatings, including particularly large spreads
▶ Three-component anti-acid mortar for joints of at least 5 mm
▶ Very high strength and chemical resistance
▶ Extremely high resistance to acids▶ Available in a neutral colour▶ For industrial ceramic floors
▶ Two-component anti-acid mortar for joints of at least 3 mm
▶ Available in 26 different colours▶ For internal and external use
▶ For ceramic tiles, stone, cement-fibre and concrete
▶ Ideal for commercial environments▶ Suitable for work-tops▶ May also be used as adhesive
▶ Two-component anti-acid mortar▶ Highly attractive finish▶ Translucent finish
▶ Available in 14 different colours and translucent
▶ For internal and external use
▶ For all types of ceramic and stone with a decorative, attractive finish for floors and coatings
▶ Ideal for glass mosaic▶ May also be used as adhesive▶ May be mixed with MapeGlitter for a wider
range of colours and special ornamental finishes
▶ Metallic coloured glitter▶ Added to Kerapoxy Design up to 10% in
weight, to make grouting mortar with a shiny, metallic finish
▶ Available in Light Gold and Silver▶ Ideal for metal tiles, mosaic and glass tiles
▶ Cleaning residues of epoxy grout from the surface of ceramic and glass coatings
▶ Cleaning the surface of coatings grouted with Kerapoxy, Kerapoxy P, Kerapoxy Design, etc. after completing laying operations
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
REACTION RESIN ADHESIVE FOR CERAMIC T
ILES
EN 12004
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
REACTION RESIN ADHESIVE FOR CERAMIC T
ILES
EN 12004
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
EN 13888
REACTION RESIN GRO
UT
IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
REACTION RESIN ADHESIVE FOR CERAMIC T
ILES
EN 12004
04
READY-TO-USE PRODUCTS IN PASTE FORM
Residential
Urban
Commercial
Mapei has developed a range of paste products which, because of their nature,
are particularly easy to use. The range includes a flexible polymer grout suitable
for coatings on façades, including those applied on flexible substrates, and a
highly thixotropic adhesive paste which bonds immediately with no slip.
05
▶ Paste filler for joints from 2 to 10 mm▶ Ready to use▶ Anti-mould (BioBlock®)
▶ Water-repellent (DropEffect®)
▶ Available in white (100), silver grey (111) and beige 2000 (132)
▶ For internal floors and internal and external walls
▶ For ceramic tiles and mosaic▶ Ideal for flexible substrates
READY-TO-USE PRODUCTS IN PASTE FORM ▶ Adhesive paste for internal and external
bonding
▶ Ready to use▶ Easy to apply, guaranteed laying
▶ Anti-mould with BioBlock® technology
▶ Highly flexible, excellent bond, good resistance to UV rays and ageing
▶ Resistant to temperatures up to +70°C▶ Thixotropic consistency for an immediate
bond with no slip▶ Particularly suitable for brick slips and
cementitious conglomerate elements lightened with synthetic resin
READY-TO-USE PRODUCTS IN PASTE FORM
Flexcolor Fix & Grout Brick
Urban features
Residential
Public
Mapei has developed a system of drainage products for laying and grouting
porphyry and paving stones which, according to the characteristics, are more
suitable for bearing either heavy loads or intense traffic. Paving stones have
been used to make the most beautiful squares and ancient town centres, but are
also used for pedestrian areas, pavements, cycle lanes and heavily trafficked
roads, as well as in residential buildings such as external courtyards, stairways
and landings.
06
SYSTEMS FOR LAYING PORPHYRY AND ROUGH-CUT STONE
07
▶ One-component polybutadiene drainage mortar for grouting paved surfaces with joints of at least 5 mm
▶ Ready to use▶ Ideal for residential environments with
lightweight traffic, such as terraces, courtyards and garden paths
▶ Good strength and excellent drainage properties
Mapedrain 1K Grout
▶ Three-component epoxy drainage mortar for grouting paved surfaces with joints of at least 5 mm
▶ Ideal for public areas with low intensity vehicle traffic, such as pedestrian areas, public areas and pavements
▶ High permeability
▶ One-component polyurethane binder for drainage mortar and grout for joints of at least 10 mm
▶ Contains no solvents▶ Ideal for use with common aggregates▶ Resistant to normal cleaning equipment for
external surfaces▶ Resistant to freeze/thaw cycles
SYSTEMS FOR LAYING PORPHYRY AND ROUGH-CUT STONE
SYSTEMS FOR LAYING PORPHYRY AND ROUGH-CUT STONE
Mapedrain 3K Grout
Mapedrain Binder
▶ Quick-setting pozzolan mortar for grouting paved floors with joints from 5 to 30 mm
▶ Very low water absorption▶ High mechanical strength▶ Ideal for stone floors subjected to heavy
loads and intense traffic, such as courtyards in commercial centres, car-parks and public squares and roads with urban traffic
Keracolor PPN
▶ Alkaline treatment to make cleaning of porous paved surfaces easier during grouting operations
▶ Ready to use▶ Applied by roller or spray▶ High yield
Mapedrain Easy CleanCG2 IN
COM
PLIAN
CE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
CG2 IN C
OMPL
IANCE WITH EUROPEAN STANDARDS
CEM
ENTITIOUS GROUT
EN 13888
FLEXIBLE JOINTS
Residential
Industrial
Commercial
Mapei has a complete range of sealants developed through constant research
with the aim of introducing high quality products on the market to make application
easy, quick and guaranteed. Only a few of the products from the range are
presented in this document, and their characteristics make them suitable for
specific applications for ceramic, natural and glass floor coatings. In particular,
several one and two-component acrylic, silicon and polyurethane sealants will be
presented.
08
Classification according to ISO 11600: F-25LM
Classification according to ISO 11600: F-20HM
FLEXIBLE JOINTS ▶ Pure acetic silicon sealant▶ Contains no solvents▶ Low modulus of elasticity▶ Resistant to mould▶ High strength, high thermal and chemical
resistance▶ Available in 26 different colours and
transparent▶ For glass, ceramic, sanitary wares and
varnished surfaces▶ Ideal for floor joints and grouting tiles in
damp environments and swimming pools▶ May be used on concrete, wood, metal, plastics
and rubber after treating with Primer FD
▶ Neutral silicon sealant▶ Odourless▶ Does not stain stone surfaces
▶ High bond strength with no primer on a wide range of substrates
▶ Excellent resistance to inclement weather and ageing
▶ Available in white (100), Manhattan 2000 grey (110), mid-grey (112), anthracite (114), black (120), beige 2000 (132) and transparent
▶ Ideal for natural stone and ceramic tiles on façades
▶ Two-component, high flow epoxy-polyurethane sealant
▶ High modulus of elasticity, high strength
▶ High chemical resistance▶ High flow, quick and easy application on floors
▶ Pre-dosed two-component product▶ Available in grey 113▶ Ideal for industrial floors, car-parks,
garages, courtyards, commercial areas, warehouses and production areas
▶ Two-component, thixotropic epoxy-polyurethane sealant
▶ High modulus of elasticity, high strength
▶ High chemical resistance▶ Thixotropic consistency for application on
vertical surfaces▶ Pre-dosed two-component product▶ Available in grey 113▶ Ideal for vertical and horizontal joints in car-
parks, garages, commercial areas, warehouses and production areas
▶ One-component thixotropic polyurethane sealant
▶ Low modulus of elasticity to avoid detachment from the edges of joints
▶ Paintable▶ High bond strength, no primer required
▶ Highly flexible even at low temperatures
▶ Available in white and grey▶ For expansion and fillet joints on pre-
fabricated buildings, traditional and ventilated façades, sealing cracks
▶ One-component castable polyurethane sealant
▶ High flow, quick and easy application on floors
▶ Low modulus of elasticity to avoid detachment from the edges of joints
▶ Paintable▶ High bond strength, no primer required
▶ Highly flexible even at low temperatures
▶ Available in grey▶ Ideal for civil and industrial floors, shopping
centres, car-parks and runways subjected to large movements and with a slope up to 2%
▶ One-component, thixotropic polyurethane sealant and adhesive
▶ Single product for flexible bonds and seals▶ High modulus of elasticity, high resistance
to traffic
▶ High sucker effect for bonding on vertical surfaces and ceilings
▶ Paintable▶ High bond strength, no primer required
▶ Compatible with all absorbent mineral substrates, metal surfaces, varnished surfaces, wood, stone, brickwork and glass
▶ Available in white, grey and black▶ Ideal for sealing civil and industrial floors
and flexible bonding of construction features instead of using screws, nails and lightweight fittings
FLEXIBLE JOINTS
09
Classified according to ISO 11600:F-25LM DIN 18540, BS 5889, ASTM C 920, TT S 00230C and TT S 001543A
Classification according to ISO 11600: F-25LM,G-25LM, ASTM C920, ASTM C1248, DIN 18540,DIN 18545-2, BS 5889, TTS 001543A, TTS 00230C
Classification according to ISO 11600: F-7.5 P
Classification according to ISO 11600: F-7.5 P
Classification according to ISO 11600: F-25LM
▶ Two-component, thixotropic epoxy-polyurethane sealant
▶ High modulus of elasticity, high strength
▶ High surface hardness, good resistance to vehicle traffic
▶ Good chemical resistance▶ High flow, quick and easy application on
floors▶ Available in grey 113▶ Ideal for internal joints in covered car-parks,
supermarkets, warehouses and store rooms
CERTIFIED QUALITYand ENVIRONMENTAL COMMITMENT
MAPEI is
f o r t h e ENVIRONMENTG D
United States Italy Canada
* Il nostro impegno per l’ambientePiù di 150 prodotti MAPEI aiutano i progettisti e i contractor per realizzare progetti innovativi LEED(The Leadership in Energy and Environmental Design) in accordo al U.S. Green Building Council
Scegli MAPEI per il tuo progetto eco-sostenibile certificato LEED*
Mapei aiuta a realizzare progetti innovativi LEED con:
Oltre il 70% degli investimenti Mapei in Ricerca&Sviluppo è destinato allo studio e alla formulazione di prodotti eco-sostenibili
• Prodotti contenenti materiali riciclati e ultraleggeri Massimo utilizzo di materiali riciclati nella composizione e nell’imballaggio dei prodotti Mapei
• Prodotti a basso contenuto di VOC Gli adesivi Mapei sono certificati Green Label Plus, EC1
• Attenzione alla qualità dell’aria La tecnologia Mapei Low Dust riduce fino al 90%, rispetto agli adesivi cementizi tradizionali, la quantità di polvere rilasciata
nell’aria indoor durante la miscelazione e l’utilizzo dei prodotti interessati
• Produzione locale Riduzione dell’impatto ambientale, attraverso la riduzione del trasporto su gomma
10
MAPEI ADHESIVES AND GROUTS FOR CERAMIC TILES AND STONE MATERIALS, PRE-BLENDED MORTARS FOR SCREEDS AND FOR REPAIRING CONCRETE, ECO ADHESIVES AND ADMIXTURES FOR CONCRETE ARE CE MARKED AND CERTIFIED IN COMPLIANCE WITH THE EUROPEAN STANDARDS
ADHESIVE AND GROUTSFOR CERAMIC TILES
All Mapei adhesives for ceramics and stone materialconform to Standard EN 12004.
All Mapei grouting mortars for ceramics and stone material conform to Standard EN 13888.
All Mapei adhesives have been awarded the CE mark in compliance with EN 12004 Annex ZA, Standard EN 12004
ADHESIVES FOR RESILIENT, TEXTILES, WOOD AND CERAMIC FLOOR AND WALL COVERINGS
Mapei ECO products bear the EMICODE EC1, “very low emission level of volatile organic compounds” mark awarded by GEV association®EMICODE
GEV
MAPEI PRODUCTS ARE BASED ON THE MOST INNOVATIVE TECHNOLOGIES FOR ENVIRONMENTAL AND HUMAN WELLBEING
BioBlock® This Mapei technology blocks various types of mould from forming and proliferating in humid conditions
DropEffect®
Mapei technology based on the use of special hydrophobic additives, to obtain water-repellent surfaces, less prone to dirtiness and with excellent durabilità
Our Commitment To The EnvironmentMore than 150 MAPEI products assist Project Designers and Contractors create innovative LEED (The Leadership in Energy and Environmental Design) certified projects, in compliance with the U.S. Green Building Council
IN C
OMPL
IA
NCE WITH EUROPEAN STANDARDS
ADHESIVES FOR CERAMIC TILE
S
IN C
OMPL
IA
NCE WITH EUROPEAN STANDARDS
GROUT
11
CERTIFICATION OF GROUTS AND FLEXIBLE JOINTS
GR
OU
TS
FIX & GROUT BRICK EN 12004 D2T • 2 points
FLEXCOLOR • • 2 points
KERACOLOR FF CG2 EC1 R • 3 points
KERACOLOR GG CG2 EC1 R 3 points
KERACOLOR PPN CG2 3 points
KERACOLOR SF CG2 EC1 R 3 points
KERAPOXY EN 12004 R2T RG 2 points
KERAPOXY CQ RG 2 points
KERAPOXY DESIGN EN 12004 R2 RG 2 points
KERAPOXY IEG RG 2 points
KERAPOXY P RG 2 points
KERAPOXY SP RG 2 points
MAXIFUGA CG2 2 points
ULTRACOLOR PLUS CG2 EC1 • • 3 points
FLE
XIB
LE J
OIN
TS
MAPEFLEX PU20 F-7.5-PISO 11600 2 points
MAPEFLEX PU30 F-7.5ISO 11600 2 points
MAPEFLEX PU40 EC1 R F-25-LMISO 11600 3 points
MAPEFLEX PU45 EC1 R F-20-HMISO 11600 3 points
MAPEFLEX PU50 SL F-25-LMISO 11600 2 points
MAPESIL AC
F-25-LMISO 11600/DIN 18540BS 5889/ASTM C920
TTS 00230CTTS 001543A
MAPESIL LM
F-25-LMISO 11600
G-25-LM/ISO 11600ASTM C 248
DIN 18540/DIN 18545BS 5889
TTS 001543ATTS 00230C
OTHERIN C
OMPL
IA
NCE WITH EUROPEAN STANDARDS
ADHESIVES FOR CERAMIC TILE
S
IN C
OMPL
IA
NCE WITH EUROPEAN STANDARDS
GROUT
12
SELECTION CHART
TYPE OF COATING MATERIAL WHERE TO USE
Mos
aic
Cotto
Cera
mic
tile
s
Ston
e
Deco
rativ
e el
emen
ts
in li
ghtw
eigh
t ce
men
titio
us
cong
lom
erat
e
Porp
hyry
and
roug
h-cu
t sto
ne
Resi
dent
ial
envi
ronm
ents
Bath
room
s an
d ki
tche
ns
Balc
onie
s an
d te
rrac
es
Swim
min
g po
ols
Saun
as a
nd
Turk
ish
bath
s
Supe
rmar
kets
Publ
ic b
uild
ings
Faça
de c
oatin
gs
Food
stuf
fs in
dust
ries
Mea
t fac
torie
s an
d oi
l mill
s
Foot
path
s an
d co
urty
ards
Road
s an
d sq
uare
s w
ith li
mite
d tr
affic
Road
s an
d sq
uare
s fo
r veh
icle
s
CEMENTITIOUS GROUTS
ULTRACOLOR PLUS(joints from 2 to 20 mm) ■ ■ • • • • • • • • • • ■
KERACOLOR SF(joints up to 4 mm) ■ ■ ■ ■ ■ ■* ■* ■*
KERACOLOR FF (joints up to 6 mm) ■ ■ ■ ■ ■ ■* ■* ■*
KERACOLOR GG(joints from 4 to 15 mm) ■ ■ ■ ■ ■ ■* ■* ■* ■ - •* ■ - •* ■* ■
MAXIFUGA(joints from 4 to 20 mm) ■ ■ ■ ■
EPOXY GROUTS
KERAPOXY (joints of at least 3 mm) ■ ■ ■ • ■ • • ■ ■ •KERAPOXY DESIGN (joints from 2 to 7 mm) • ■ • • • •KERAPOXY P ■ ■ ■ • • •KERAPOXY CQ ■ ■ ■ • • •KERAPOXY IEG ■ •KERAPOXY SP ■ •
READY-TO-USE PASTEPRODUCTS
FLEXCOLOR ■ ■ •FIX & GROUT BRICK • ■ ■
PRODUCTS FOR LAYING PORPHYRY AND ROUGH-CUT STONE
MAPEDRAIN 1K GROUT ■ ■
MAPEDRAIN 3K GROUT ■ ■
MAPEDRAIN BINDER ■ ■ ■
KERACOLOR PPN • ■ • • •
FLEXIBLE JOINTS
MAPESIL AC • ■ • • • ■ • • ■ ■
MAPESIL LM ■ • ■ • • ■ ■ • ■ ■ ■ • ■
MAPEFLEX PU21 ■ ■ ■ ■ ■
MAPEFLEX PU20 ■ • • • •MAPEFLEX PU30 ■ ■ ■ ■ ■
MAPEFLEX PU40 ■ ■ ■ ■ ■ ■ ■ ■
MAPEFLEX PU45 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
MAPEFLEX PU50SL ■ ■ • ■ ■ ■ ■ • • •■ = fit for use • = particularly recommended by Mapei * = with FUGOLASTIC
SELECTION CHART
13
TYPE OF COATING MATERIAL WHERE TO USE
Mos
aic
Cotto
Cera
mic
tile
s
Ston
e
Deco
rativ
e el
emen
ts
in li
ghtw
eigh
t ce
men
titio
us
cong
lom
erat
e
Porp
hyry
and
roug
h-cu
t sto
ne
Resi
dent
ial
envi
ronm
ents
Bath
room
s an
d ki
tche
ns
Balc
onie
s an
d te
rrac
es
Swim
min
g po
ols
Saun
as a
nd
Turk
ish
bath
s
Supe
rmar
kets
Publ
ic b
uild
ings
Faça
de c
oatin
gs
Food
stuf
fs in
dust
ries
Mea
t fac
torie
s an
d oi
l mill
s
Foot
path
s an
d co
urty
ards
Road
s an
d sq
uare
s w
ith li
mite
d tr
affic
Road
s an
d sq
uare
s fo
r veh
icle
s
CEMENTITIOUS GROUTS
ULTRACOLOR PLUS(joints from 2 to 20 mm) ■ ■ • • • • • • • • • • ■
KERACOLOR SF(joints up to 4 mm) ■ ■ ■ ■ ■ ■* ■* ■*
KERACOLOR FF (joints up to 6 mm) ■ ■ ■ ■ ■ ■* ■* ■*
KERACOLOR GG(joints from 4 to 15 mm) ■ ■ ■ ■ ■ ■* ■* ■* ■ - •* ■ - •* ■* ■
MAXIFUGA(joints from 4 to 20 mm) ■ ■ ■ ■
EPOXY GROUTS
KERAPOXY (joints of at least 3 mm) ■ ■ ■ • ■ • • ■ ■ •KERAPOXY DESIGN (joints from 2 to 7 mm) • ■ • • • •KERAPOXY P ■ ■ ■ • • •KERAPOXY CQ ■ ■ ■ • • •KERAPOXY IEG ■ •KERAPOXY SP ■ •
READY-TO-USE PASTEPRODUCTS
FLEXCOLOR ■ ■ •FIX & GROUT BRICK • ■ ■
PRODUCTS FOR LAYING PORPHYRY AND ROUGH-CUT STONE
MAPEDRAIN 1K GROUT ■ ■
MAPEDRAIN 3K GROUT ■ ■
MAPEDRAIN BINDER ■ ■ ■
KERACOLOR PPN • ■ • • •
FLEXIBLE JOINTS
MAPESIL AC • ■ • • • ■ • • ■ ■
MAPESIL LM ■ • ■ • • ■ ■ • ■ ■ ■ • ■
MAPEFLEX PU21 ■ ■ ■ ■ ■
MAPEFLEX PU20 ■ • • • •MAPEFLEX PU30 ■ ■ ■ ■ ■
MAPEFLEX PU40 ■ ■ ■ ■ ■ ■ ■ ■
MAPEFLEX PU45 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
MAPEFLEX PU50SL ■ ■ • ■ ■ ■ ■ • • •
14
CONSUPTION TABLETile size(mm)
Joint(mm)
Ultracolor Pluskg/m2
Keracolor SFkg/m2
Keracolor FFkg/m2
Keracolor GGkg/m2
Maxifugakg/m2
KerapoxyKerapoxy DesignKerapoxy PKerapoxy CQkg/m2
KerapoxyIEGkg/m2
Kerapoxy SPkg/m2
Flexcolor
20x20x4 2 1.3 1.2 1.2 1.3 1.3
50x50x4 2 0.5 0.5 0.5 0.5 0.5
100x100x6 3 0.6 0.6 0.6 0.6 0.6 0.6
75x150x6 3 0.6 0.6 0.6 0.6 0.6 0.6
100x200x6 3 0.5 0.4 0.4 0.5 0.5 0.5
150x150x6 3 0.4 0.4 0.4 0.4 0.4 0.4
200x200x8 3 0.4 0.4 0.4 0.4 0.4 0.4
100x200x6 5 0.8 0.7 0.8 0.8 0.6 0.8
200x200x8 5 0.7 0.6 0.7 0.7 0.6 0.7
250x330x8 8 0.8 0.8 0.8 0.6 1.0 0.8
300x300x8 8 0.7 0.7 0.7 0.6 1.0 0.7
120x240x12 8 2.0 2.0 2.0 2.0 1.7 2.7 2.0
400x400x10 10 0.8 0.8 0.9 0.8 0.7 1.1 0.8
300x600x10 10 0.8 0.8 0.9 0.8 0.7 1.1 0.8
450x450x12 10 0.9 0.9 0.9 0.9 0.8 1.2 0.9
500x500x12 10 0.8 0.8 0.9 0.8 0.7 1.1 0.8
600x600x12 10 0.7 0.7 0.7 0.7 0.6 0.9 0.7
120x240x18 10 3.6 3.6 3.8 3.6 3.2 5.0 3.6
150x300x20 15 4.8 4.8 5.1 4.8 4.2 6.6
300x300x20 15 3.2 3.2 3.4 3.2 2.8 4.4
120x240x20 20 8.0 8.5 8.0 7.0 11
250x250x20 20 5.2 5.5 5.2 4.5 7.1
kgK
K values:ULTRACOLOR PLUS 1.6KERACOLOR SF 1.5KERACOLOR FF 1.5KERACOLOR GG 1.6MAXIFUGA 1.7KERAPOXY 1.6KERAPOXY P 1.6KERAPOXY CQ 1.6KERAPOXY IEG 1.4KERAPOXY SP 2.2KERAPOXY DESIGN 1.6FLEXCOLOR 1.6
A = tile lengthB = tile widthC = tile thicknessD = joint widthK = function of the mix density
in mm
COLOURING: THE CHOISE
The chart contains all of the existing available colours of the standard range and three additional colours exclusive to Kerapoxy CQ.
WH
ITE
WH
ITE
MAN
HAT
TAN
200
0
SILV
ER G
REY
MED
IUM
GR
EY
CEM
ENT
GR
EY
ANTH
RAC
ITE
BLA
CK
JASM
INE
VAN
ILLA
BEI
GE
2000
CO
RAL
RED
CAR
AMEL
BR
OW
N
TER
RAC
OTT
A
CH
OC
OLA
TE
TER
RA
DI S
IEN
A
YELL
OW
MAG
NO
LIA
MAU
VE
VIO
LET
CR
OC
US
BLU
E
TUR
QU
OIS
E
SPAC
E B
LUE
MIN
T
JAD
E G
REE
N
TOR
MAL
INE
BAR
DIG
LIO
GR
EY
SEA
BLU
CR
EAM
TRAN
SPAR
ENT
0 100
110
111
112
113
114
120
130
131
132
140
141
142
143
144
145
150
160
161
162
170
171
172
180
181
182
282
283
290
999
THE CEMENTITIOUS GROUTS
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Ultracolor Plus
Keracolor SF ●Keracolor FF ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Keracolor GG ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●THE POLYMERIC GROUTS
● ● ●FlexcolorTHE EPOXY GROUTS
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Kerapoxy
Kerapoxy P ● ●Kerapoxy IEG ● ●Kerapoxy CQ ● ● ● ● ● ● THE SEALANTS
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●Mapesil AC
Mapesil LM ● ● ● ● ● ● ●
The chart contains the 15 colours of the Kerapoxy Design range.Kerapoxy Design can be mixed with MapeGlitter creating a larger range of colours.
N.B.: Due to the printing processes involved, the colours in the two tables should be taken as merely indicative of the shades of the actual product.
TRAN
SLUC
ENT
SILV
ER G
REY
ICE
WHI
TE
PINK
PEAR
L GR
EY
DARK
GRE
Y
SAHA
RA Y
ELLO
W
TURQ
UOIS
E
DARK
BRO
WN
BLUE
MAN
DARI
N OR
ANGE
RED
GOLD
ANTH
RACI
TE
WHI
TE
LIGH
T GO
LD
SILV
ER
700
702
710
716
720
728
729
730
731
740
744
750
760
770
799
u u u u u u u u u u u u u u u
15
GROUTS and SEALANTSfor layingCERAMIC
16
GROUTS AND SEALANTS FOR LAYING CERAMIC
MAPEI supplies their sales personnel and
authorised showrooms with a series of
useful instruments to help choose the most
suitable colour.
Display banner with samplesof the standard colours
from the Coloured Grouts range
Practical binder with samplesof the standard colours from the Coloured Grouts range
Colour fan with 26 standard colours from the Coloured Grouts range and 15 different colours for Kerapoxy Design
Display box with removable samples of Ultracolor Plus in the 26 standard colours from the Coloured Grouts range
Display box with 25 removable samples of Kerapoxy Design
HEADQUARTERSMAPEI Spa Via Cafiero, 22 - 20158 MilanTel. +39-02-37673.1 Fax +39-02-37673.214Internet: www.mapei.comE-mail: [email protected]
C.P
. MK
7282
30 (G
B) 0
9/10