Guide to Assembly & Usage
Transcript of Guide to Assembly & Usage
1
Guide to Assembly & Usage
Shelving is safe when used responsibly. If in doubt, contact the supplier.
If you have any missing components please take note of the part name and contact your supplier
COMPONENT CHECK LISTComponent Quantity
A Upright 4 or 8 split uprights
B Front & Back Beam 2 per level
C Side Beam 2 per level
D Center Support 1 or 2 per level
dependent on width of Front & Back Beam
E Upright Connector 4 if product has split uprights
F Plastic Foot 4
G Chipboard Shelves 1 perlevel
Shelf load capacitiesMaximum permitted shelf capacities are based on UDL†. Please note that the bay capacity may limit the maximum load per shelf:
LOADING INFORMATION
IF YOU ARE IN ANY DOUBT REGARDING LOAD CAPACITIES, PLEASE CONTACT YOUR SUPPLIER†UDL = Uniformly Distributed Load
Newpo Industrial Shelving UnitMaximum load per shelf Maximum load per bay
300kg 1200kg
Capacities are common for all standard shelf depths.
Industrial Shelving Unit
A
B
C
D
G
InformationIf in doubt, contact the supplier
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Read this guide thoroughly before commencing assembly and retain for future reference
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Before commencing assembly, unpack carefully and check that all components ordered are included
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Tools – Small rubber mallet, flat head screwdriver
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Assess for floor fixing. Tall narrow bays may require this to ensure stability
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
We recommend products over 2000mm high are fixed to the wall where possible
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Dispose of packaging materials responsibly
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Build on a suitable level floor, which is strong enough to support the load and allow adequate working space
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
WarningRules for the safe use of shelving:
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Assembly should be undertaken by a minimum of two competent people
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Never climb on the structure or stand on the shelving
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Do not lean or support ladders, steps, or other objects against shelving
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Ensure these instructions are retained for reference and that users are aware of the rules for safe use
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Take care during assembly and in use, particularly when lifting or stretching and when using tools
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Wear appropriate safety clothing – protective gloves and footwear are recommended
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
CautionDuring assembly, ensure to:
Do not use in damp or wet conditions
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Load heavy items on the lower shelves and lighter items on the higher shelves
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Always use safety steps to reach high shelves
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Ensure that the maximum load carrying capacities are not exceeded
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
Please refer to the loading information supplied for details
Wear appropriate clothing, protective gloves and footwear are recommended
If in doubt pleasecontact yoursupplier
Please read these instructions
Inspect all packagesfor damage and checkthat all the components orderedare included
Assembly should be undertakenby at least 2 competent persons
Tools required
We recommendthis product is�xed to the �oor
Caution! During assembly
Take care when handling heavy objects
Build on a suitable level �oor surface
Allow adequate working space and be aware of othersworking around you
Dispose of packagingmaterials responsibly
Warning
Never climb on the structure
Do no lean ladders, steps or other objects against the shelving
Always use safetysteps to reach highshelves
Load heavy itemson the lower shelves
This product is designed for hand loading only
Do not use in dampor wet environments
Ensure that maximumload carrying capacitiesare not exceeded
Please referto the loadingchart suppliedfor details
This product is designed for hand loading only
1 2 3
4 5 6
7 8 9
10 11 12
2 Note: Illustrations not to scale
Assembly - Industrial Shelving UnitAdd plastic foot F onto bottom of upright A . Where required, join two split uprights A together using an upright connector E . Knock into place with a rubber mallet if needed.
Bend over the tabs with a screwdriver to hold supports in place
Insert a short side beam C into the slot in the uprights A at the lowest level required
Tap the beam C down with a rubber mallet ensuring that the beam tongues are fully located at the bottom of the slot
Repeat steps 2-3 until you have a ladder style frame
Tip: Now is a good time to check the space between the beams suits the items you want to store on the shelves and adjust are required
Repeat steps 2-4 to make a second ladder style frame
Tip: Use the first frame as a template to get the correct spacing
Take two long beams B and insert them into slots in the frame at the same height as the short beams CUsing a rubber mallet tap the beams into place.
Insert the other end of the long beam B into the second frame as per step 6
Repeat steps 6-7 to add the remaining beams
Bend the centre supports beam E tabs at right angles then slide the centre support beams B into the slots in the long beams
8180°
Please ensure tab is folded flat as shown
1 2
3
Slide in Bend to
P
Insert the chipboard decks G onto each level