Guide for Configuring WB-AMR_Ran.doc

download Guide for Configuring WB-AMR_Ran.doc

of 2

Transcript of Guide for Configuring WB-AMR_Ran.doc

  • 8/11/2019 Guide for Configuring WB-AMR_Ran.doc

    1/2

    Guide for Configuring AMR-WB (Adaptive Multi Rate Wide Band)

    Internal

    Guide for Configuring AMR-WB (Adaptive Multi Rate Wide Band)

    This section describes how to activate verif! and deactivate the optional feature for AMR-

    WB (Adaptive Multi Rate Wide Band)"

    Prerequisite

    #- $ependencies on %ardwareThe C& supports associated specifications"

    '- $ependencies on ther eaturesThis feature does not depend on other features"

    *- +icenseThe license controlling this feature has been activated"

    ,- ther rere.uisitesThe /0 supports associated specifications"

    The AMR-WB function is enabled on the M1C and /MG"

    Context

    This feature provides AMR-WB services which help i2prove the 3o1 of voice services

    when resources are sufficient"

    CAUT!"

    #- This feature is an integrated solution" To enable this feature specific para2eters 2ust

    be configured based on the actual networ4 conditions"

    '- $ont activate the feature without co2plete configuration changes reco22ended

    otherwise the networ4 capacit! and 56 values 2a! be affected"

    Pro#edure

    A#tivation Pro#edure

    $- !ptional% Run the B1C7899 MM+ co22and &'T UAMRCWB to set the R&C

    level speech rates for the gold silver and bron:e users"

    - !ptional% Run the B1C7899 MM+ co22and A UC'**AMRCWB to set cell

    level1peech rates for the gold silver and bron:e users"

    +erifi#ation Pro#edure

    $- !ptional% Run the B1C7899 MM+ co22and *&T UAMRCWB to .uer! the

    AMRWB speech rates of the gold silver and bron:e users"

    - !ptional% Run the B1C7899 MM+ co22and *&T UC'**AMRCWB to .uer! the

    AMR-WB speech rates for the gold silver and bron:e users"

    2014-08-27 Huawei Proprietary - Restricted Distribution Page1, otal2

  • 8/11/2019 Guide for Configuring WB-AMR_Ran.doc

    2/2

    Guide for Configuring AMR-WB (Adaptive Multi Rate Wide Band)

    Internal

    ,- n the B1C7899 +MT open the Monitor tab page choose Monitor ; Monitor ;

    UMT& Monitoring ; Cell Perforan#e Monitoring and create a tas4 of AMR

    Mode"

    .- 0nable the AMR-WB function on /0# and /0' and enable the /0s to ca2p on the

    cell C0++