GUARNIZIONI SPIROMETALLICHE IES-BRA SPIRALWOUND GASKETS ... · Dimension Table 1.01 Dimension Table...
Transcript of GUARNIZIONI SPIROMETALLICHE IES-BRA SPIRALWOUND GASKETS ... · Dimension Table 1.01 Dimension Table...
GUARNIZIONI SPIROMETALLICHE IES-BRASPIRALWOUND GASKETS IES-BRA
Le guarnizioni spirometalliche nascono nel 1912 e ancora oggi rappresentano una delle soluzioni più versatili e performanti nel campo dei sistemi di tenuta per flange.La spirometallica è costruita con una striscia continua di metallo (winding) alternata a strisce di materiale di riempimento (filler), con uno speciale profilo a “V” che garantisce un effetto molla, ovvero un buon ritorno elastico.Le guarnizioni sono di diverso tipo a seconda dell’alloggiamento e della flangia dove devono essere impiegate.
The spiralwound gaskets were born in 1912 and today still represent one of most adaptable and well performing solution in the sealing systems range for flanges.The spiralwound is manufactured with a continuous metal strip (winding) alternating with filler material strips, with a special “V” shape, that guarantees a spring effect, or better, a good spring back.The gaskets are of different type according to the housing and the flange where they must be used.
MATERIALI DISPONIBILI
Industrial Service ha un magazzino fornito di guarnizioni in pronta consegna. In particolare IES (spirale con anello esterno), IES-IR (spirale con anello interno ed esterno), con GRAFITE e PTFE abbinati a AISI 316L come elemento di tenuta, anelli esterni in AISI 316 e CARBON STEEL, e anelli interni in AISI 316.Il magazzino Industrial Service è completo per le misure in millimetri da DN 10 a DN 600 per PN 10 fino a PN 250 e per le misure in polici da ½” a 24” per pressioni da 150LBS a 2500LBS.
AVAILABLE MATERIALS
Industrial Service has a warehouse stocked up with various type of ready gaskets, in particular IES (winding with external ring) and IES-IR (winding with inner and outer ring), with GRAPHITE and PTFE matched with AISI 316L as sealing element, AISI 316 and CARBON STEEL outer rings and AISI 316 inner rings.The Industrial Service warehouse is complete for the millimetre sizes from DN 10 to DN 600 for PN 10 up to PN 250 and for the inch size from ½” to 24” for pressures from 150 lbs to 2500 lbs.
Anello di centraggioCentering Ring
Elemento di tenutaSpiral Winding
Anello internoInner Ring
TIPO IESTYPE IES
FLANGE RASATE / FLANGE PIANERAISED FLANGES / FACED FLANGES
FLANGE RASATE / FLANGE PIANERAISED FLANGES / FACED FLANGES
FLANGE MASCHIO E FEMMINAFLANGE LINGUA E GOLA
MALE AND FEMALE FLANGESTOUNGE AND GROOVE FLANGES
FLANGE MASCHIO E FEMMINAFLANGE LINGUA E GOLA
MALE AND FEMALE FLANGESTOUNGE AND GROOVE FLANGES
TIPO IES-IRTYPE IES-IR
TIPO IES-INTYPE IES-IN
TIPO IES-RTYPE IES-R
Le guarnizioni spirometalliche sono fornibili anche nei seguenti metalli:The spiralwound gaskets can be supplied also in the following metals:
AISI DIN CODICE COLORE/COLOUR CODE304 1.4301 GIALLO/YELLOW316L 1.4404 VERDE/GREEN316Ti 1.4571 VERDE/GREEN321 1.4541 TURCHESE/TORQUOISE
CARBON STEEL St37 ARGENTO/SILVERALLOY 20 - NERO/BLACK
INCOLOY 800 1.4876 BIANCO/WHITEHASTELLOY B 2.4615 MARRONE/BROWNHASTELLOY C 2.4819 BEIGE/BEIGEINCONEL 600 2.4816 ORO/GOLDMONEL 400 2.4360 ARANCIO/ORANGE
INCOLOY 825 2.4858 BIANCO/WHITETITANIUM 3.7025 VIOLA/PURPLE
I materiali fornibili come riempimento (filler material) sono GRAFITE, PTFE, ESENTE AMIANTO (NON-ASBESTOS) E CERAMICA.Le guarnizioni spirometalliche possono essere costruite con vari disegni come evidenziato nel disegno di seguito:
Le spirometalliche possono presentare barre di separazione per poter trovare applicazione nei macchinari come gli scambiatori di calore. I limiti di applicazione per questa guarnizione sono date dai limiti dei materiali che la compongono, comunque in linea generale può arrivare a resistere a pressioni di 2500psi e temperature di 815°C.
The materials that can be supplied as filler material are GRAPHITE, PTFE, NON ASBESTOS andCERAMIC.The spiralwound gaskets can be manufactured according to various drawings, as pointed out in thefollowing drawing:
The spiralwound gaskets can have partition bars to be used in the machineries like heat exchangers.The applications limits for this gasket are the ones of the materials it is made up of, however ingeneral it can withstand pressures of 2500psi and temperatures of 815°C.
CircolareCircular
OblungoOblong
RettangolareRectangle
OvaleOval
DiamanteDiamond
GocciaPeca
Dimension Table 1.01
Dimension Table 1.02
For Raised Faced Flanges DIN Flanges DN 10 to DN 800.
For Raised Faced Flanges DIN Flanges DN 900 to DN 3000
Dimensions in mm
10-320910
10101210142016301830202022302430263028303030
10-320930
10301230145016601860205022602460266028603060
10-40974
10781280151017201920212023302530273029303130
64-320982
10861290
---------
10101711241341154817721972218223842594279430143228
1610111128134215421764196421682378
----
251042115413641578179820002230
-----
4010841194139816181830
-------
64110812201452
---------
d1 d2 d3 d4
PNDN 900
10001200140016001800200022002400260028003000
Dimensions in mm
10-320182227344348577386
108134162183213267318363414518618718818
10-320242833404954668295
120146174195225279330375426530630730830
10-4036404754657084
102115140168196221251307358405458566666770874
64-32036404754657084
104119144172200227257315366413466574674778882
10465161718292
107127142162192217247272327377437488593695810917
16465161718292
107127142162192217247272328383443495617734804911
25465161718292
107127142168194224254284340400457514624731833942
40465161718292
107127142168194224265290352417474546628747852974
645661
-82
-103113137148174210247277309364424486543657764879988
1005661
-82
-103119143154180217257287324391458512572704813950
-
1605661
-82
-103119143154180217257284324388458
------
2506772
-83
-109124153170202242284316358442538
------
3206772
-92
-119134170190229274311358398488
-------
d1 d2 d3 d4
PNDN 10
1520253240506580
100125150175200250300350400500600700800
Dimension Table 1.03
To ASME B 16.20 for Raised Faced Flanges per ASME B16.5.
Dimensions in mm
150 -300 14,320,627,038,144,555,666,781,0
106,4131,8157,2215,9268,3317,5349,3400,1449,3500,1603,3
400 - 600 14,320,627,038,144,555,666,781,0
106,4131,8157,2209,6260,4317,5349,3400,1449,3500,1603,3
900 14,320,627,0
----
81,0106,4131,8157,2209,6260,4314,3342,9393,7444,5495,3603,3
150014,320,627,033,341,352,463,581,0
106,4131,8157,2206,4258,0314,3339,7387,4438,2489,0577,9
250014,320,627,033,341,352,463,581,0
106,4131,8157,2200,0247,7292,1
-----
150 -300 19,025,431,847,654,069,982,6
101,6127,0155,6182,6233,4287,4339,7371,5422,3474,7525,5628,7
400 - 600 19,025,431,847,654,069,982,6
101,6120,7147,6174,6225,4274,6327,0362,0412,8469,9520,7628,7
900 -------
95,3120,7147,6174,6222,3276,3323,9355,6412,8463,6520,7628,7
1500 -2500 19,025,431,839,747,758,769,992,1
117,5142,9171,5215,9269,9323,9362,0406,4463,6514,4616,0
150 -600
31,839,747,660,369,985,798,4
120,7149,2177,8209,6263,5317,5374,7406,4463,6527,0577,9685,8
900 - 250031,839,747,660,369,985,798,4
120,7149,2177,8209,6257,2311,2368,3400.0457,2520,7571,5679,5
150 47,657,266,776,285,7
104,8123,8136,5174,6196,9222,3279,4339,7409,6450,9514,4549,3606,4717,6
30054,066,773,0
82,695,3
111,1 130,2149,2181,0
215,9250,8308,0
362,0422,3485,8
539,8596,9654,0 774,7
40054,066,773,0
82,695,3
111,1 130,2149,2177,8
212,7247,7304,8
358,8419,1482,6
536,6593,7647,7 768,4
600 54,066,773,0
82,695,3
111,1 130,2149,2193,7
241,3266,7320,7
400,0457,2492,1
565,2612,8682,6 790,6
90063,569,979,4
88,998,4
142,9 165,1168,3206,4
247,7288,9358,8
435,0498,5520,7
574,7638,2698,5 838,2
150063,569,979,4
88,998,4
142,9 165,1174,6209,6
254,0282,6352,4
435,0520,7577,9
641,4704,9755,7 901,7
2500 69,976,285,7
104,8117,5146,0 168,3196,9235,0 279,4317,5387,4 476,3549,3
- --- -
d1 d2 d3 d4
DN(in.)
1/23/4
1 1 1/41 1/2
2 2 1/2
34 568
101214 161820 24
Dimension Table 1.04
Dimension Table 1.05
For (MSS SP44) Raised Faced Flanges per ASME B16.47 series A.
For (API 605) Raised Faced Flanges per ASME B16.47 series B
Dimensions in mm
(psi)
150
654,1
704,9
755,7
806,5
857,3
908,1
958,9
1009,7
1060,5
1111,3
1162,1
1212,9
1263,7
1314,5
1358,9
1409,7
1460,5
1511,3
300
654,1
704,9
755,7
806,5
857,3
908,1
952,5
1003,3
1054,1
1104,9
1152,6
1209,8
1244,6
1320,8
1352,6
1403,4
1447,8
1524,0
400
660,4
711,2
755,7
812,8
863,6
917,7
952,5
1000,3
1051,1
1104,9
1168,4
1206,5
1257,3
1308,1
1352,6
1403,4
1454,2
1517,7
600
647,7
698,5
755,7
812,8
863,6
917,7
952,5
1009,7
1066,8
1111,3
1162,1
1219,2
1270,0
1320,8
1378,0
1428,8
1473,2
1530,4
900
666,8
711,2
774,7
812,8
863,6
920,8
1009,7
1060,5
1111,3
1155,7
1219,2
1270,0
-
-
-
-
-
-
(psi)
150
673,1
723,9
774,7
825,5
876,6
927,1
977,9
1028,7
1079,5
1130,3
1181,1
1231,9
1282,7
1333,5
1384,3
1435,1
1485,9
1536,7
300
685,8
736,6
793,8
850,9
901,7
955,8
977,9
1022,4
1073,2
1130,3
1178,1
1235,2
1295,4
1346,2
1403,4
1454,2
1511,3
1562,1
400
685,8
736,6
793,8
850,9
901,7
955,8
971,6
1025,7
1076,5
1130,3
1193,8
1244,6
1295,4
1346,2
1403,4
1454,2
1505,0
1568,5
600
685,8
736,6
793,8
850,9
901,7
955,8
990,6
1047,8
1104,9
1162,1
1212,9
1270,0
1320,8
1371,6
1428,8
1479,6
1536,7
1593,9
900
685,8
736,6
793,8
850,9
901,7
958,9
1035,1
1098,6
1149,4
1206,5
1270,0
1320,8
-
-
-
-
-
-
(psi)
150
704,9
755,7
806,5
860,6
911,4
968,5
1019,3
1070,1
1124,0
1178,1
1228,9
1279,7
1333,5
1384,3
1435,1
1485,9
1536,7
1587,5
300
736,6
787,4
844,6
901,7
952,5
1006,6
1016,0
1070,1
1120,9
1181,1
1228,9
1286,0
1346,2
1397,0
1454,2
1505,0
1562,1
1612,9
400
736,6
787,4
844,6
901,7
952,5
1006,6
1022,4
1076,5
1127,3
1181,1
1244,6
1295,4
1346,2
1397,0
1454,2
1505,0
1555,8
1619,3
600
736,6
787,4
844,6
901,7
952,5
1006,6
1041,4
1098,6
1155,7
1212,9
1263,7
1320,8
1371,6
1422,4
1479,6
1530,4
1587,5
1644,7
900
736,6
787,4
844,6
901,7
952,5
1009,7
1085,9
1149,4
1200,2
1257,3
1320,8
1371,6
-
-
-
-
-
-
(psi)
150
774,7
831,9
882,7
939,8
990,6
1047,8
1111,3
1162,1
1219,2
1276,4
1327,2
1384,3
1435,1
1492,3
1549,4
1606,6
1663,7
1714,5
300
835,2
898,7
952,5
1006,6
1057,4
1117,6
1054,1
1114,6
1165,4
1219,2
1273,3
1324,1
1378,0
1428,8
1492,3
1543,1
1593,9
1644,7
400
831,9
892,3
946,2
1003,3
1054,1
1117,6
1073,2
1127,3
1178,1
1231,9
1289,1
1346,2
1403,4
1454,2
1517,7
1568,5
1619,3
1682,8
600
866,9
914,4
971,6
1022,4
1073,2
1130,3
1104,9
1155,7
1219,2
1270,0
1327,2
1390,7
1447,8
1498,6
1555,8
1612,9
1663,7
1733,6
900
882,7
946,2
1009,7
1073,2
1136,7
1200,2
1200,2
1251,0
1301,8
1368,6
1435,1
1485,9
-
-
-
-
-
-
d1 d2 d3 d4
DN(in.)
262830323436384042444648505254565860
Dimensions in mm
(psi)
150
654,1
704,9
755,7
806,5
857,3
908,1
958,9
1009,7
1060,5
1111,3
1162,1
1212,9
1263,7
1314,5
1365,3
1412,7
1463,5
1514,3
300
654,1
704,9
755,7
806,5
857,3
908,1
971,6
1022,4
1054,1
1124,0
1178,1
1200,2
1267,0
1317,8
1346,2
1428,8
1484,4
1505,0
400
654,1
701,8
752,6
800,1
850,9
898,7
952,5
1000,3
1051,1
1104,9
1168,4
1206,5
1257,3
1308,1
1352,6
1403,4
1454,2
1517,7
600
644,7
692,2
752,6
793,8
850,9
901,7
952,5
1009,7
1066,8
1111,3
1162,1
1219,2
1270,0
1320,8
1378,0
1428,8
1473,2
1530,4
900
673,1
723,9
787,4
838,2
895,4
927,1
1009,7
1060,5
1111,3
1155,7
1219,2
1270,0
-
-
-
-
-
-
(psi)
150
673,1
723,9
774,7
825,5
876,3
927,1
974,6
1022,4
1079,5
1124,0
1181,1
1231,9
1282,7
1333,5
1384,3
1435,1
1485,9
1536,7
300
673,1
723,9
774,7
825,5
876,3
927,1
1009,7
1060,5
1079,5
1162,1
1216,2
1231,9
1317,8
1368,6
1384,3
1479,6
1535,2
1536,7
400
666,8
714,5
765,3
812,8
866,9
917,7
971,6
1025,7
1076,5
1130,3
1193,8
1244,6
1295,4
1346,2
1403,4
1454,2
1505,0
1568,5
600
663,7
704,9
778,0
831,9
889,0
939,8
990,6
1047,8
1104,9
1162,1
1212,9
1270,0
1320,8
1371,6
1428,8
1479,6
1536,7
1593,9
900
692,2
743,0
806,5
863,6
920,8
946,2
1035,1
1098,6
1149,4
1206,5
1270,0
1320,8
-
-
-
-
-
-
(psi)
150
698,5
749,3
800,1
850,9
908,1
958,9
1009,7
1063,8
1114,6
1165,4
1224,0
1270,0
1325,6
1376,4
1422,4
1472,2
1522,5
1573,3
300
711,2
762,0
812,8
863,6
914,4
965,2
1047,8
1098,6
1117,6
1200,2
1254,3
1270,0
1355,9
1406,7
1422,4
1524,0
1573,3
1574,8
400
698,5
749,3
806,5
860,6
911,4
965,2
1022,4
1076,5
1127,3
1181,1
1244,6
1295,4
1346,2
1397,0
1454,2
1505,0
1555,8
1619,3
600
714,5
755,7
828,8
882,7
939,8
990,6
1041,4
1098,6
1155,7
1212,9
1263,7
1320,8
1371,6
1422,4
1479,6
1530,4
1587,5
1644,7
900
749,3
800,1
857,3
914,4
971,6
997,0
1085,9
1149,4
1200,2
1257,3
1320,8
1371,6
-
-
-
-
-
-
(psi)
150
725,4
776,2
827,0
881,1
935,0
987,6
1044,7
1095,5
1146,3
1197,1
1255,8
1306,6
1357,4
1408,2
1463,8
1514,6
1579,6
1630,4
300
771,7
825,5
886,0
939,8
993,9
1047,8
1098,6
1149,4
1200,2
1251,0
1317,8
1368,6
1419,4
1470,2
1530,4
1593,9
1655,8
1706,6
400
746,3
800,1
857,3
911,4
962,2
1022,4
1073,2
1127,3
1178,1
1231,9
1289,1
1346,2
1403,4
1454,2
1517,7
1568,5
1619,3
1682,8
600
765,3
819,2
879,6
933,5
997,0
1047,8
1104,9
1155,7
1219,2
1270,0
1327,2
1390,7
1447,8
1498,6
1555,8
1612,9
1663,7
1733,6
900
838,2
901,7
958,9
1016,0
1073,2
1124,0
1200,2
1251,0
1301,8
1368,6
1435,1
1485,9
-
-
-
-
-
-
d1 d2 d3 d4
DN(in.)
262830323436384042444648505254565860
Dimension Table 1.06
For (API 605) Raised Faced Flanges per ASME B16.47 series B
Dimensions in mm
Male/female flangesper DIN 2692 (PN 10-100)
Tongue/groove flangesper DIN 2691 (PN 10-160)
Dimensions in mm
182228354349617790
115141169195220274325368420520620720820920
1020
20222429364351617395
106129155183213239292343395447549649751856961
1062
34395057657587
109120149175203233259312363421473575675777882987
1091
303234395057657587
109120149175203233259312363421473575675777882987
1092
101520253240506580
100125150175200250300350400500600700800900
1000
4-68
101520253240506580
100125150175200250300350400500600700800900
1000
d1 d1DN DNd2 d2
Dimension Table 1.07
For (MSS SP44) Raised Faced Flanges per ASME B16.47 series A.
Male/female flangesper ASME B16.21 (150-1500 lbs)
Tongue/groove flangesper ASME B16.21 (150-1500 lbs)
Dimensions in mm Dimensions in mm
As S
peci
fied
by th
e U
ser
182430384457688497
110137162213267318349400451502603
35434857648395
118130145173203254305362394448511559616667
2127334248607389
102114141168219273324356406457510610
354351647392
105127140157186216270324381413470535585641690
354351647392
105127140157186216270324381413470535585690
25333848547386
108121132160190238286343375425489535591640
Narrow Narrow
d1 d1d2 d2
Wide Wide
d1 d2d2DN(in.)
1/23/411 1/41 1/222 1/233 1/2456810121416182024
DN(in.)
1/23/411 1/41 1/222 1/233 1/245681012141618202224
Spiralwound Gaskets - Tolerances
Profile steel strip “s” - tolerance+0,3 mm
SizeProtrusion
mmUp to 600600 to 800800 to 1600Over 1600
inchUp to 2424 to 3232 to 60Over 60
Tolerancemm
+0,4/-0,4+0,8/-0,8+1,2/-1,2+1,5/-1,5
Tolerancemm
+0,8/-0,8+1,6/-1,6+1,6/-1,6+2,0/-2,0
Tolerancemm
+0/-0,4+0/-1,6+0/-1,6+0/-2,0
mm2,53,24,57,2
min.mm0,10,10,10,3
max.mm0,20,20,20,5
Diameter Diameter Diameter Thickness
d1, d2 d3 d4 s
SPESSORE DELLE GUARNIZIONI PRIMA E DOPO IL MONTAGGIO
SPESSORE DELLE GUARNIZIONI
GASKETS THICKNESS BEFORE FITTING/AFTER FITTING
SELECTION OF GASKET THICKNESS
A seconda del diametro le spirometalliche sono disponibili in diversi spessori. La tabella di seguito specifica lo spessore ideale prima e dopo lo schiacciamento tra le flange.
Le spirometalliche normalmente hanno uno spessore di 4,5 mm, comunque se necessario, possono essere prodotte con spessori differenti.
La tabella di seguito specifica lo spessore in funzione delle applicazioni.
Depending on the diameter, the spiralwound gasket is available in a variety of thicknesses.The table below specifies the thicknesses and the recommended optimum thickness after fitting.
The spiralwound® is usually produced with a thickness of 4,5 mm. However, in some cases another thickness can be selected to obtain effective sealing.
The table below specifies which gasket thickness should be selected for certain applications.
100-3600200-16001601-3000
16-630631-16001601-3000
16-630631-150010-200
5.3 - 5.64.7 - 4.9
3.2 - 3.4
2.3 - 2.5
1.8 - 2.0
tl/mm/
b max/mm/
t2/mm/
d/mm/
Spessore dopo il montaggioThickness after fitting
/mm/7.26.4
4.5
3.2
2.5
33302835302525208
54
3.2(1)
2
1.5(2)
Spessore guarnizioneGasket thickness/mm/
Dimensioni delle flangeFlange dimensions/mm/
6.4
4.5
3.22.5
nominal pipe diameters from Ø 1001 -Ø 3000 machine flanges from Ø 801 - Ø 3000nominal pipe diameters up to Ø 1000machine flanges up Ø 800valve bonnetsnominal pipe diameters up to Ø 100