GT SERIES depliant english
-
Upload
cartes-label-machines -
Category
Documents
-
view
243 -
download
7
description
Transcript of GT SERIES depliant english
HOT STAMPINGSILK SCREEN PRINTING
EMBOSSINGFLEXO VARNISHING
COLD FOILFLAT BED DIE-CUTTING
SEMI-ROTARY DIE-CUTTINGLASER CONVERTING
Time and materials savings
Accuracy at any speed
Energy saving technology
Fully modular concept
Sturdiness and quality
_______________________
Engl
ish
FEATURES THAT MAKE CARTES MACHINES THE BEST IN THEIR CATEGORY
AUTOMATIC CENTRING DEVICES
MORE SAFETY FOR THE OPERATOR
INDEPENDANT TOUCH SCREEN CONTROL PANELS
ENERGY SAVING TECHNOLOGY
EXTREME MODULARITY
These machines are even more precise thanks to the new automatic Multi Head Positioning System (MHPS) that corrects, concurrently on each printing unit, the possible gap irregularities detected on pre-printed materials. Each printing and die-cutting unit is automatically positioned to ensure a perfect centering and minimizing the waste of material. This also reduces the time required for the initial settings and increases the working speed.
Thanks to the implementation of the security systems STO (Safe Torque Off), SS1 (Safe Stop), SBC (Safe Brake Control) and SLS (Safely Limited Speed), it is possible to obtain an effective protection of the operator, combining the safety to the practical needs required by the production.
Each unit is equipped with a touch screen control panel in order to ease the setting and regulation of all the parameters.
Through the use of the IGBT technology and the centralized management system of drives power supply, that allows the sharing of energy between the motors during the operation of the machine. The energy released by the motors during the braking phase, is reused or even returned to the power grid. It follows an energy saving from 30 to 40%.
CARTES introduces an innovative modular assembling concept that allows to invert, replace or even add printing and die-cutting units with respect to the original configuration.
The technologies applied to the GT SERIES machines make them the best option on the market, not only for the finishing, but also for fulfilling complete high value labels with the maximum economy. CARTES has actually developed a unique and innovative technology that allows to obtain the best results in terms of accuracy and productivity, both for short and long runs. In addition to the strength, the quality of the materials and the high precision at every speed, the GT Series offers to label market new and exclusive features such as:
GT 360 SERIES TECHNICAL DATA
PRODUCTIVITY: Up to 15.000 cycles/hourPOWER SUPPLY: 400 V three-phase - 50/60 HzWEB WIDTH: 360 mm - (14 in)
HOT STAMPING UNITCLICHÉ HOLDING BOX DIMENSIONS: 360 x 320 mm - (14 x 12.6) in
SILK SCREEN UNITPRINTING AREA: 360 x 320 mm - (14 x 12.6) inUV LAMP POWER: Stepless, from 24 to 200 W/cm
SEMI-ROTARY FLEXO VARNISHING UNITCYLINDER DEVELOPMENT: 500 mm - 20 in - Z: 184FORMAT: from 5 (0.2 in) to 350 mm (14 in)PRINTING SPEED: up to 60 m/min - 66 yd/min CLICHÉ THICKNESS RANGE: from 0,2 (1/64 in) mm to 2 mm (5/64 in)UV LAMP POWER: Stepless, from 36 to 160 W/cm
SEMI-ROTARY DIE-CUTTING UNITCYLINDER DEVELOPMENT: 566 mm - 22.3 in - Z: 179FORMAT: from 5 (0.2 in) to 500 mm (20 in)DIE-CUTTING SPEED: up to 60 m/min - 66 yd/minDIE THICKNESS RANGE: from 0,2 (1/64 in) mm to 2 mm (5/64 in)
FLAT BED DIE-CUTTING/EMBOSSING UNIT DIE HOLDING BOX DIMENSIONS: 360 x 320 mm - (14 x 12.6) in
LASER DIE-CUTTING UNITWORKING AREA: 360 x ∞ mm - (14 in ) x ∞ in
This series is also available in the version GT 280
GT 280 SERIES TECHNICAL DATAWEB WIDTH: 280 mm - (11 in)SILK SCREEN PRINTING AREA: 280 x 280 mm - (11 x 11) inCLICHÉ HOLDING BOX DIMENSIONS: 280 x 280 mm - (11 x 11) inDIE HOLDING BOX DIMENSIONS: 280 x 260 mm - (11 x 10.2) inLASER DIE-CUTTING AREA: 280 x ∞ mm - (11 in) x ∞ FORMAT OF THE FLEXO VARNISHING: from 5 (0.2 in) to 350 mm (14 in)FORMAT OF THE SEMIROTARY DIE-CUTTING: from 5 (0.2 in) to 500 mm (20 in)
TS GT
AF
RB FTSC350
HOT STAMPING The hot stamping unit can print and emboss (even simultaneously), as well as apply holograms, overlaminate and die-cut. Thanks to an innovative system that manages the dynamism of the printing cycle, no matter the speed is, both during the start-up or the production, the unit keeps a constant contact time between the cliché and the material. This always assures the best transfer of the foil and minimizes the setting time and the quantity of material needed to start a new job. The hot stamping unit can feature up to 3 foil feeding systems (two in transversal and one in longitudinal direction) with multistep regulation to avoid foil wastening.
SILK SCREEN PRINTING The silk screen printing perfectly matches with the need of fulfilling intense coverages, accurate result in details and rich colours, to obtain highly brilliant and valuable products. It is also possible to process embossing with Braille effect and spot varnishing. This unit is supplied with a powerful UV dryer with stepless electronic management of the lamps that allows to flexibly adjust the power from 24 to 200 W/cm, achieving the minimum consumption in stand-by mode. The automatic ink feeding system allows to keep a constant spread during the printing and also markedly reduces the intervention of the operator.
TS GT
AF
RB FTSC350
FLEXO VARNISHING The CARTES semi-rotary flexo printing & varnishing unit with gearless system is completely controlled by servo motors and equipped with devices that facilitate operator’s work. The application and replacement of the flexible cliché can be done in a few seconds thanks to the opening on the top that allows the operator an ease access to the cylinder. All data processing and parameters are visible in real time on the display and can be saved into the computer of the machine to be quickly reused.
IMAGE DISTORTION SYSTEM (IDS)This software makes possible to automatically adapt the polymer plates created for cylinders of different development. Moreover, the software can narrow up to 20% and maximum 5 printing paths keeping constant the interspaced between them.
MULTI HEAD POSITIONING SYSTEM (MHPS)As all the units of the GT series, the flexo varnishing unit is also equipped with the automatic positioning system that corrects any gap irregularities detected on pre-printed materials: the software instructs the units to move along the guides and automatically position in order to reduce the waste of time and material, other then considerably increasing the working speed.
TS GT
AF
RB FTSC350
EB Embossing holderMB Magnetic box CG Pressure gaugesLU OverlaminationR Semi-rotary die-cutting unitL LASER die-cutting unitFC Cutting through unit & slide for piecesLF Sheet fed cutting systemCF Cutting unit in continuous mode «Cut-on-the-fly»DS Data Storage SoftwareTS Touch screen control panelsUO Material output unitRC2 Servo driven waste rewinder with dancerSC350 Label inspection systemRK Slitting with scissor blade systemRB Slitting with razor blade systemCCR Back score slittingHRC Easy wastening heating plateFT Extractable spicing top at line end
LEGEND
UI Material input unitPM Flag mark reading systemCT Corona treatmentLPS Label position system BET Electronic tensioning systemCU Web cleanerCR Remote connection H Hot stamping unitTF Transversal foil feederTF2 Second transversal foil feederTFL Longitudinal foil feederCGF Plates holder with guidesFO Photocell for hologram applicationMHPS Multi Head Positioning SystemS Silk screen printing unitAF Automatic ink feederUV UV LampF Flexo printing & varnishing unitLUF UV overlaminationRS Rewinder for cold foil wasteningD Flat bed die-cutting & embossing unit
FLAT BED DIE-CUTTING & EMBOSSING The flat bed die-cutting unit can also overlaminate and make embossing. This unit develops a high pressure thanks to the movement operated by the double knee-joint and also stands out for the following features:- the holder plate pivot for a fast set up of the cliché or the die, as well as make easy their replacement;- 4 centesimal gauges placed on the micrometricalscrews to ease pressure set up.
LASER DIE-CUTTING UNIT The LASER die-cutting unit is the only existing on the market with an unlimited lifetime & Semi-sealed® source that guarantees constant power and cutting quality along the time, minimizing the management and the maintenance costs. Thanks to the Radio Frequency Laser power control the machine can achieve the maximum performance as it is possible to process in a single cycle, the next: any shape die-cutting & cut through, micro-perforation, engraving, progressive and regressive numbering. All these jobs are digitally programmable in order to get products of the highest value in real time. Nowadays, Laser converting tecnology is, without any doubt, the most versatile solution on the market, being available in SINGLE or DUAL versions, 250 W or 350 W and suitable for paper & films.
SEMI-ROTARY DIE-CUTTING UNIT The CARTES semi-rotary die-cutting unit with gearless system is completely controlled by servo motors and equipped with devices that ease the operator’s work. The application and replacement of the flexible die can be done in a few seconds thanks to the opening top cover that allowing the operator an easily access to the cylinder. All data processing and parameters are visible in real time on the display and can be saved into the computer of the machine to be quickly reused.
AIR GAP SYSTEM (AGS)The innovative AIR GAP SYSTEM electronically manages the inclination of the anvil cylinder, adjusting the distance between the die and the material and controlling the cutting depth with extremely accuracy. Just setting up the die thickness from 0,2 mm (1/64 in) to 2 mm (5/64 in) and the liner thickness, become very easy to get a perfect die-cutting from the first cycle. System is complete with safety features that avoids the possible breaking of the die caused by a wrong adjustment.
IMAGE DISTORTION SYSTEM (IDS)This software makes possible to automatically adapt dies created for cylinders of different development. Moreover, the software can widen or narrow up to 20% and maximum 5 die-cutting paths keeping constant the interspaced between them. Thanks to this distortion it is possible to use flexible dies created for magnetic cylinders with other developments and also to obtain a wider range of shapes with no need to buy and store new dies.
CARTES s.r.l. - 2, Via Michelangelo - 46024 MOGLIA (MANTOVA) ITALYTel. + 39 0376 511 511 Fax + 39 0376 55 77 55
www.cartes.it - [email protected]
THE COMPANY
INSTALLATIONS WORLDWIDE
GERMANYSWITZERLAND
SPAINRUSSIA
BELGIUMITALY
AUSTRIAARMENIABELARUSBULGARYCYPRUSCROATIA
DENMARKESTONIAFINLANDFRANCE
U.K.GREECEIRELAND
ASIA
JAPANHONG KONG
TAIWANPAKISTAN
SAUDI ARABIABANGLADESH
CHINAJORDAN
INDIAINDONESIA
IRANISRAEL
KAZAKHSTANSOUTH KOREA
KUWAITLEBANONMALAYSIA
PHILIPPINESREP. KIRGHIZISTAN
SINGAPORESRI LANKA
SYRIATHAILANDTURKEY
U.A.E.VIETNAM
AMERICAS
U.S.A.ARGENTINA
BRAZILCHILE
MEXICOCOLOMBIA
GUATEMALAPERU
BOLIVIACANADA
ECUADOREL SALVADORHONDURAS
DOMINICAN REP.URUGUAY
VENEZUELA
AFRICA
SOUTH AFRICAMOROCCO
TUNISIAALGERIAEGYPT
IVORY COASTMADAGASCAR
OCEANIA
AUSTRALIAFRENCH POLYNESIA
LATVIALITHUANIA
LUXEMBOURGMALTA
MOLDOVAMONTENEGRO
THE NETHERLANDSNORWAYPOLAND
PORTUGALCZECH REP.
ROMANIASERBIA
SLOVAKIASLOVENIASWEDENUKRAINEHUNGARY
EUROPE
Since 1970, CARTES has been producing printing and finishing machines for labels establishing with success in 88 Countries with the installation of more than 4000 machines that stand out for their quality, innovation, strength and high productivity.
CARTES offers the widest range of label machines with hot stamping, silk screen printing, embossing, flexo varnishing, cold stamping, flat bed die-cutting, semi-rotary die-cutting and with the exclusive LASER converting technology.