GSM Based Automated Irrigation System Using Rain-Gun
-
Upload
santanu-mukherjee -
Category
Engineering
-
view
77 -
download
4
Transcript of GSM Based Automated Irrigation System Using Rain-Gun
GSM Based Automated Irrigation System using Raingun
Paramveer MarwahSantanu Mukhopadhyay
Understanding the Concept
Irrigation Approaches
Manual Approach
Semi Automated Approach
Total Automated Approach
Circuit Components Used
Microcontroller
Transformer
Voltage Regulator LM7805
Rectifier Diodes (1N4001)
LED Indicator and LCD Display
BC 548 Transistor
Moisture Sensor and Portable Water Pump
Block Diagram
Flow Chart
Algorithms
Step1: Start the methodology.
Step2: introduce force is supplied to GSM
Step3: The dampness level not exactly or more than.
Step4: If the level is showing exceeding 50% there is no need of watering.
Step5: Moisture level under 50% begin watering system
Step6: This instate the pump and rain-gun
Step7: After the procedure finishes, it moves to unique state.
Step8: Stop the procedure.
Implementing the Idea
Circuit Diagram
Uniqueness of our project
Eliminating the GSM modem
Cost Efficient
Switching from manual approach to an automated approach
Less man power
Accurate & Time saving
Future Scope
Huge room for further enhancement
Implementing Clocking Technology
Boosting the gun with further essential nutrients
Variable valve of the Rain-gun.
Enabling the Bluetooth Technology for better automatic functioning.