GS33K05D20-50E.pdf

8/12/2019 GS33K05D20-50E.pdf

1/8

GeneralSpecications

LHS1150, LHM1150Server for Remote Operationand Monitoring Function

Yokogawa E lectric Corporation2-9-32, Nakacho, Musashino-shi, Tokyo, 180-8750 JapanTel.: 81-422-52-5634 Fax.: 81-422-52-9802

GS 33K05D20-50E

GS 33K05D20-50ECopyright Aug. 2011 (YK)

6th Edition June 12, 2013 (YK)

GENERALCENTUM VP Server for Remote Operation and Monitoring Function can be executed from the remote PCs for

plant operation and monitoring. By using the terminal service (TS) server of the Windows Server, the Server forRemote Operation and Monitoring Function allows multiple PCs which are connected with one server simultaneouslyoperating and monitoring in the TS server. If a PC is located away from the instrument room, as long as the PC isconnected to the HIS terminal service server through the network, the operation and monitoring view on the HIS canbe displayed on the remote PC. The remote PC does not need to have the operation and monitoring applications.LHM1150 is a package for CENTUM VP Entry Class, which is suitable for small systems. The basic features are thesame as LHS1150.

FUNCTION SPECIFICATIONS

System CongurationThe Server for Remote Operation and Monitoring Function runs on a in Windows Server OS, allowing it to be a serverfor remote-access operation and monitoring. If user names are entered and logged on from a network client PCconnected to the server for remote operation and monitoring, the functions running on the server for remote operationand monitoring can be used on the client PC.

Client PCSite

CENTUM VP

HIS

FCS

Vnet/IP

Central control room

Office building

F01E.ai

Client PC

Intranet

Server for RemoteOperation andMonitoring

GR0001Distillationcolumn

LICA48.9

FIC45.7%

FIC25.4%

LICA38.9?

RC-1023.4%

TRC49.2?

FIC41.4 TDT

53.8?

TDA37.5? 51.3?

PAC

Distillationcolumn Tank1FIC100

TIC301

100.0

0.0

AUTNR

FIC100

100.0

0.0

20.0

40.0

60.0

80.0

PV M3/H 70.0

AUTNR

SV M3/H 50.0MV % 65.0

Columnow

FIC100

TIC301

TG1001Block:10 Group:01

13:34

1 F IC001. PV Inlet ow 72.1 M3/h 100.0 0.0 2 FIC002. PV Outlet ow 53.3 M3/h 100.0 0.0 3 LIC100. PV Level 3.8 M 100.0 0.0 4 T IC 10 0. P V T em pA 2 5. 7 DE GC 1 00 .0 0 .0 5 T IC 20 0. P V T em pB 1 4. 1 DE GC 1 00 .0 0 .0 6 7 8

13:36 13:38 13:40 13:42 13:44

82.3

62.3

42.3

22.3

2.3

V P . 1 0 0 C I F

102.3

00:12:00 100%

1

2

Figure Example of Conguration of Server for Remote Operation and Monitoring Function

A maximum of eight simultaneous sessions (a session stands for a logic connection to the server for remote operationand monitoring function started from logon and ended at logoff) can be run on one server for remote operation andmonitoring. Logging on from the server for remote operation and monitoring is also counted as one session. A clientPC can display screens on a session-by-session basis regardless of the screens displayed on the server for remoteoperation and monitoring or on other clients. It may take a few seconds for the client PC to display the screensdepending on the network speed.When using the Server for Remote Operation and Monitoring Function, please set up one or more standard HISalong with the client PC on the control network (Vnet/IP or V net). The standard HIS has better reliability for real-time

operations than the client PC. For instance, the control network communication fails between the Server for RemoteOperation and Monitoring and the client PC, the operation and monitoring from the client PC become unavailablewhile the standard HIS continues its control and monitoring.
http://localhost/var/www/apps/conversion/tmp/submenu.htmhttp://localhost/var/www/apps/conversion/index.htmhttp://localhost/var/www/apps/conversion/index.htmhttp://localhost/var/www/apps/conversion/tmp/submenu.htm

8/12/2019 GS33K05D20-50E.pdf

2/8

2

All Rights Reserved. Copyright 2011, Yokogawa Electric Corporation

GS 33K05D20-50E Aug. 19, 2011-00

Functions Available for Remote Operation and MonitoringThe functions running on the server for remote operation and monitoring can be used on the client PC.Standard builder functions realize engineering with a remote PC using the TS functions directly. In this case, thestandard builder function can connect only one session apart from eight sessions for operation and monitoring.System views on multiple PCs, including the server for remote operation and monitoring, cannot be started

simultaneously. However, if reference builders are called up in reference mode, screens can be displayed on multiplePCs.If LHM1150 (CENTUM VP Entry Class) is used, select the packages that are in parentheses. Packages with noparentheses can be directly used in CENTUM VP Entry Class (except for LHS4000).

Table Package Coexistence in the Server for Remote Operation and Monitoring (1/2)

Model Name Coexistence NoteLHS1100

(LHM1101) Standard Operation and Monitoring Function X

LHS1120 Console HIS Support Package for EncloseDisplay Style -

LHS1130 Console HIS Support Package for Open DisplayStyle -

LHS2411 Exaopc OPC Interface Package (for HIS) X

When the OPC package is used on the remote

operation and monitoring server, it behaves slightlydifferent when it is used with the standard HIS.Conrm the operation of the application programunder the server for remote operation and monitoringenvironment is required.

LHS2412 CENTUM Data Access Library X The operation check is required in each createdapplication.LHS4000 Million Tag Handling Package XLHS4100 Congured information Reference Package XLHS4150 Output to External Recorder Package -LHS4190 Line Printer Support Package -LHS4200 Consolidated Historical Message (Meeting FDA) -LHS4410

(LHM4410) Control Drawing Status Display Package X

LHS4420(LHM4420) Logic Chart Status Display Package X

LHS4450 Multi project Connection Package XLHS4600 Multiple-Monitor Support Package -LHS4700 Advanced Alarm Filter Package -LHS6510 Long-term Data Archive Package X

LHS6530 Report Package - A remote operation environment can be constructedby installing the Report Package in the client PC.

LHS6660(LHM6660) Process Management Package X

Please dene the server for remote operationand monitoring as a client station in the processmanagement conguration denition.

LHS6710(LHM6710) FCS Data Setting/Acquisition Package (PICOT) -

X: Yes

- : No

8/12/2019 GS33K05D20-50E.pdf

3/8

8/12/2019 GS33K05D20-50E.pdf

4/8

4


GS 33K05D20-50E Aug. 19, 2011-00

Operation Screen Mode and Display ModeHIS provides two operation screen modes, full-screen mode and window mode. In each mode, HIS displays viewssuch as the Graphic View or the Trend View. Moreover, a remote HIS terminal connected through the Server forRemote Operation and Monitoring Function package also has two display modes.

Operation Screen Mode

Full-Screen ModeIn this mode, HIS displays a frame that consists of several views assigned for a certain function or purpose. On astandard HIS, a number of tabbed frames can be displayed and overlapped in full-screen mode. However, on aremote HIS terminal connected through the Server for Remote Operation and Monitoring Function package, only axed frame can be displayed. In this mode, a Pop-Up Window such as a Faceplate View can be displayed in front ofthe frame.

Window ModeIn this mode, several windows can be displayed in cascade style of Microsoft Windows so that the windows areoverlapped. Each window contains only one view.

Display ModeOn a remote HIS terminal connected through the Server for Remote Operation and Monitoring Function package, thedisplay mode can be either desktop mode or panel mode. The mode can be selected when the client PC is connectingto the server for the remote operation and monitoring services. Desktop Mode

In desktop mode, the operation and monitoring activities on a remote HIS can be carried out in the same style as ona standard HIS where the System Message Banner is displayed on the top and the Browser Bar is displayed on theleft.

F02E.ai

Recycle Bin

HIS0163T...

40%

12%

12

6

9

1011 1

2

3

457

8

10:58HIS0163 - Remo...

HIS0163 - Remote Desktop

LICA48.9

FIC45.7 %

FIC25.4 %

LICA38.9 ?

TRC49.2 C

FIC41.4 %

TDT53.8 C

TDA37.5 C 51.3 C

PAC

Distillation column

GR0001 Distilation Column

?Copy

2008/03/03 14:35 FCS0101 Batch Manager Ready FCS0101 RIGHT Control FCS0101 RIGHT Manual Reset Start17 00

OverviewTrend Plant

Search

TG0701TG0801GR0003GR0004GR0005TG0901GR0006GR0007

?

View

Comment

Address /SYSTEM/.ALProcess Alarm

Favorite

PP

SYSTEM

PRODUCT

.AL

.OG

.SO

.SH

.SA

.SF FCS0101

.SF FCS0102.PR

100.0

20.0

40.0

60.0

80.0

Reactor flow

AUTNRPV

SV

MV

FIC200

FIC001

M3/H55.3

M3/H50.0

%65.1

favorite-1MYPJT1

Pop-UpWindow

System Message Banner Browser Bar

Figure Desktop Mode HIS Window Display in Full-Screen

8/12/2019 GS33K05D20-50E.pdf

5/8

5

All Rights Reserved. Copyright 2011, Yokogawa Electric Corporation GS 33K05D20-50E

Panel ModeIn panel mode, a designated view such as Graphic View or Trend View can be displayed on desktop. The SystemMessage Banner and the Browser Bar are not displayed. The session can be established much faster than it is inthe desktop mode.

F03E.ai

HIS0163T...

12

6

9

1011 1

2

3

457

8

10:58HIS 0163 - Remote ...

Recycle Bin

HIS0163 - Remote Desktop

LICA48.9

FIC45.7 %

FIC25.4 %

LICA38.9 ?

TRC49.2 C

FIC41.4 %

TDT53.8 C

TDA37.5 C

51.3 CPAC

Distillation column

GR0001 Distilation Column

Figure Panel Mode HIS Window Display in Full-Screen

Maximum Number of WindowsMaximum number of windows can be displayed on a client PC varies according to the HIS operation screen mode andthe display mode dened in the Server for Remote Operation and Monitoring Function package.

Operation ScreenMode

Display Mode

Full-Screen Mode Window Mode

Frame Pop-Up Window Window

Desktop Mode 1(Fixed) Maximum 2 Maximum 5

Panel Mode 1(Fixed) 1(Fixed) 2(Fixed)

Aug. 19, 2011-00

8/12/2019 GS33K05D20-50E.pdf

6/8

6


GS 33K05D20-50E Aug. 19, 2011-00

Window Update PeriodThe update period for windows displayed on a clientPC can be specied in seconds (1 to 30 seconds). Thisis commonly set during each client session logged ontothe server for remote operation and monitoring.

Security SystemThe Server for Remote Operation and MonitoringFunction can be run in an independent operationand monitoring security system for each client PC bylogging on using different user names. The securitysystem for remote monitoring can be restricted.

Operating RecordOperating messages generated at terminal equipmentidentify the client PC.

Buzzer A client PC can issue a buzzer via a sound device.

In the panel mode, because buzzer reset key is notdisplayed, buzzer output is restricted compared withthe desktop mode as follows:

Buzzer PanelmodeDesktop

modeSystem N YProcess (high-priority alarm N YProcess (medium- or low-priority alarm) N YOperator guide message N YIllegal operation Y YConrmation Y YRecovery N YClick Y Y

Y: BuzzN: Silent

Automatic Log-off If there are no operations carried out at a client PCwithin a specied period of time, automatic log-offoccurs. This is commonly set during each client sessionlogged onto the server for remote operation andmonitoring. The inactive period for automatic log-off canbe set in minutes (1 to 59 minutes). Automatic log-offcan be disabled.

Functional Difference between the Serverfor Remote Operation and MonitoringFunction and the Standard HIS

Below is functional difference between the Server forRemote Operation and Monitoring Function and thestandard HIS. A sound function is required on the client PC in

order to use a buzzer with the remote operation andmonitoring function server.

The operation and monitoring range on a remote HISterminal can be dened by the settings on the UserSecurity Builder. The operation and monitoring rangeon a standard HIS is the range that is permitted byboth the settings on HIS Constants Builder denedfor each HIS and the settings on the User SecurityBuilder dened for each user. The security settingson HIS Constants Builder dened for each HISare not valid for the remote HIS terminal, only thesettings on the User Security Builder are valid.

When restricting the range of operation and

monitoring of a user according to the securityseetings for the user, the alarm and operator guidemessages can be inhibited but not the correspondingbuzzer sounds. The buzzer sound of a messagewill be triggered anyway as long as an alarm or anoperator guide message occurs even though themessage is inhibited by security settings. Therefore,when applying user security settings to restrict usersoperation and monitoring range, it is necessary toturn off the buzzer of the client PC.

Operation keyboards cannot be used on both theserver PC and the client PC.

Up to 50 simultaneous primitives of the trend can bedisplayed in the client PC.

Displaying the Graphic Window to which a number

of primitive trends are allocated in several sessionsmight not display some primitive trends. The function automatically printing messages such as

the process alarm is not equipped. The print function from the historical report window

and the process data window and the hard copybutton are available just like HIS.

Functional Difference between the ClientPC and the Server PC

Below is functional difference between the client PCand the server PC. The function from the scheduler is executed only on

the server PC.

The request of the sequence message is processedonly on the server PC. The panel set is displayed only on the server PC. When the Windows are called up from another HIS,

the Windows are displayed only on the server PC. When the message is generated, the automatic

window switching is performed only on the server PC.

8/12/2019 GS33K05D20-50E.pdf

7/8

7

All Rights Reserved. Copyright 2011, Yokogawa Electric Corporation GS 33K05D20-50E

OPERATING ENVIRONMENT

LHS1150, LHM1150 Server for Remote Operation and Monitoring Function

Hardware Operating EnvironmentFor Windows Server 2008

CPU Required Xeon dual core minimum 2.93 GHzMain memory Required 4 GB

Hard diskRequired Free space of minimum 40 GB (*1)Recommended Free space of minimum 70 GB (*1)

DisplayRequired Minimum SXGA (1280x1024) resolution, True Color (min. 16.77 million colors)For wide screen Minimum WXGA+ (1440x900) resolution, True Color (min. 16.77 million colors)

Graphics Required

DirectX 9-class GPU(Graphics Processing Unit) that supports A WDDM(Windows Driver Display Model) Driver Pixel Shader 2.0 in hardware 32 bits per pixel 128 MB Graphics memory

Expansion slot Required 1 slot is used for control network interface (*2)Mouse RequiredOptical disc drive Required DVD-ROM

*1: When the optional software package (Long-term Data Archive Package) is used, see also the GS Long-term Data ArchivePackage (GS 33K05J10-50E).

*2: VI702/VI701 or VF702/VF701 is required for control network interface card.

For Windows Server 2008 R2

CPU Required Xeon dual core minimum 2.93 GHzMain memory Required 8 GB

Hard diskRequired Free space of minimum 40 GB (*1)Recommended Free space of minimum 70 GB (*1)

DisplayRequired Minimum SXGA (1280x1024) resolution, True Color (min. 16.77 million colors)For wide screen Minimum WXGA+ (1440x900) resolution, True Color (min. 16.77 million colors)

Graphics Required

DirectX 9-class GPU(Graphics Processing Unit) that supports A WDDM(Windows Driver Display Model) Driver Pixel Shader 2.0 in hardware 32 bits per pixel 128 MB Graphics memory

Expansion slot Required 1 slot is used for control network interface (*2)Mouse RequiredOptical disc drive Required DVD-ROM

*1: When the optional software package (Long-term Data Archive Package) is used, see also the GS Long-term Data ArchivePackage (GS 33K05J10-50E).

*2: VI702/VI701 or VF702/VF701 is required for control network interface card.

Software Operating EnvironmentWindows OS

The relations betweenWindows and CENTUM VP

Windows Server 2008 Standard

Edition

Windows Server 2008 Standard

Edition R232-bit 64-bitSP2 SP1

R5.01 Yes YesR5.02 Yes YesR5.03 Yes Yes

Yes: Compatible No: Incompatible

Note: Service Pack is abbreviated as SP (Example: SP1 stands for Service Pack 1).Note: To enable this function, LHS1100 or LHM1101 Standard Operation and Monitoring Function is required for the server PC.

Neither LHS1100 nor LHM1101 Standard Operation and Monitoring Function is required for the client PC.Note: A server PC with Windows Server 2008 or Windows Server 2008 R2 itself cannot be used for operation and monitoring

function.

In addition to a Server License and Windows Server Client Access License (CAL), following licenses are needed. for Windows Server 2008: Terminal Services Client Access License (TS CAL) for Windows Server 2008 R2: Remote Desktop Services Client Access License (RDS CAL)

June 12, 2013-00

8/12/2019 GS33K05D20-50E.pdf

8/8

8


GS 33K05D20-50E

Client PC Operating Environment

Hardware Operating EnvironmentMaintain the operating environment of the hardware requirements for LHS1100, LHM1101 Standard Operation andMonitoring Function.If used in desktop mode, it is recommended that the display resolution be at least 1280 x 1024 pixels. If used in panel

mode, it is recommended that the display resolution be 1024 x 768 pixels or greater.Software Operating EnvironmentWindows 7, Windows Vista

Feb. 8, 2012-00Subject to change without notice.

MODELS AND SUFFIX CODES

Description

Model LHS1150 Server for Remote Operation andMonitoring Function

SufxCodes

-V Software License1 Always 1

1 English version

OptionCodes

/N0004 Number of client PCs that can besimultaneously connected: Up to four

/N0008 Number of client PCs that can besimultaneously connected: Up to eight

Note: Be sure to specify one of the optionalspecications.

Description

Model LHS1150 Server for Remote Operation andMonitoring Function

SufxCodes

-E Additional Client License1 Always 1

1 English version

/N0408 Additional number of client PCs thatcan be connected simultaneously(up to four up to eight)

Description

Model LHM1150Server for Remote Operation andMonitoring Function (for CENTUM VPEntry Class)

SufxCodes

-V Software License1 Always 1

1 English version

OptionCodes

/N0004 Number of client PCs that can besimultaneously connected: Up to four

/N0008 Number of client PCs that can besimultaneously connected: Up to eight

Note: Be sure to specify one of the optionalspecications.

Description

Model LHM1150Server for Remote Operation andMonitoring Function (for CENTUM VPEntry Class)

SufxCodes

-E Additional Client License1 Always 1

1 English version

/N0408 Additional number of client PCs thatcan be connected simultaneously(up to four up to eight)

ORDERING INFORMATIONSpecify model and sufx codes.

TRADEMARKS CENTUM is a registered trademark of Yokogawa

Electric Corporation. Windows is a registered trademark of Microsoft

Corporation in the United States and/or othercountries.

Ethernet is a registered trademark of XEROXCorporation in the United States and/or othercountries.

Other product and company names appearing in thisdocument are trademarks or registered trademarks oftheir respective holders.

GS33K05D20-50E.pdf

Documents

Transcript of GS33K05D20-50E.pdf