GS-8000 SERIES
Transcript of GS-8000 SERIES
HEAVY DUTY SUPERSIZE CNC TURNING CENTERS
GS-8000 SERIES
With leading technologies and high quality components, the GS-8000 series heavy duty
CNC turning center combines a super rigidity box way bed with extra large diameter servo
indexing turret and powerful gear spindle structure to provide you with efficient machining
performance for large diameter and extra long work pieces. Meanwhile, with the optional live
tooling turret and Y-axis, the GS-8000 series can easily accomplish multi-tasking operations for
large and complex work pieces to fulfill various machining needs for today and tomorrow.
HEAVY DUTY SUPERSIZE CNC TURNING CENTERS
3-step gear box is driven by FANUC spindle motor with 45 kW maximum torque to provide excellent heavy duty cutting capability.
The low center of gravity slant bed and wedge saddle design provide a super rigid structure.
The optional Y-axis travel is of 320 mm which provides high precision and high efficiency machining performance.
Fully enclosed splashguards keep chips and coolant contained for a safe clean working environment.
( GS-8800L3Y series model shown with optional accessories. )
1
2
1
3
2
3 Steady rest
2 Live tooling turret
1 Tailstock
The MT#6 built-in bearing quill provides greater rigidity for heavy loads. The extension and retraction of the quill is programmable and pressure is adjustable. The software simplifies the positioning procedure of the programmable tailstock.
Working with the live tooling turret and C-axis control enables the machine to perform multiple tasks such as turning, milling, drilling, and tapping. It can prevent machining error causing by moving the work piece from one machine to another thus saving cycle time and manpower.
The optional hydraulic steady rest can support work-pieces up to Ø 512 mm diameter, which provides the best support for large work-piece.
SUPER-RIGIDITY CONSTRUCTION
320 mm
Super rigidity box ways
Extra wide hardened and ground box ways are directly formed into the machine bed and saddle during the casting process. They are precision machined and widely spaced for maximum strength. The box way design also provides the rigidity needed for heavy duty and interrupted turning applications.
The low center of gravity heavy duty slant bed design provide a super rigid foundation
for the headstock, turret, and tailstock.
By using Finite Element Methods ( FEM ), optimal reinforce ribbings are directly cast into
the one-piece bed structure. Mechanical rigidity has been increased by more than 30
% when compared to conventional designs. The GS-8000 series can provide both heavy
cutting and high precision capabilities. More rigidity also means extended tool life.
Built to endure years and years of rigorous high production turning, the heavily ribbed,
one-piece thermally balanced bed and casting components are of MEEHANITE casting.
MEEHANITE grade cast iron is capable of withstanding much greater stress without
deforming and provides maximum vibration damping, which result in a machine that
will outlast and outperform the competition.
All spindle and servo motors, including drives, are FANUCαi series components to
ensure peak machining performance and accuracy.
1
2
C3 class hardened and precision ground ball screws ensure the highest accuracy and durability possible. Plus, pretension on all axes minimizes thermal distortion.
The oil mist system can evenly and efficiently lubricate the spindle bearings to prevent thermal expansion while ensuring machining accuracy.
1 2
( Casting structure of GS-8000L2Y model shown. )
3
4
High precision bearings are directly assembled for maximum level of support and precision. Bearing configuration is
designed for heavy-duty cutting with ultra-smooth performance and long term durability with a higher level of accuracy.
With over 7,090 N-m of torque available on the low speed of the 3-speed gear box, turning tough material with big
diameter is now a simple task.
Standard spindle orientation feature allows the spindle
to stop at desired programmed position. Useful in
broaching and manual part loading applications
where a fixed spindle position is required.
ULTIMATE TURNING POWER
TURRET HEADMaterial : FCD500
PULLEYMaterial : FC30
CYLINDERMaterial : S45C
BRAKE DISCMaterial : ASTM G3000
WHEELMaterial : Aluminum
SPINDLEMaterial : SCM21H
COUPLINGMaterial : SCM 415
Sample Work-Pieces
5
6
GS-8000L2
Front chuck
Work-piece
Spindle Output
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque ( 30 min. )
7000
326 rpm62 190
56005670
4200
2800
6815
4605
1400
50
40
30
10
20
0
Torque( Nm )
Output( kW )Gear-1
GS-8600
7250
310 rpm60 180
58005900
4350
2900
7090
4790
1450
0
50
40
30
10
20
Torque( Nm )
Output( kW )
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
Torque ( 30 min. )
37 kW ( 30 min. )
45 kW ( 25% )
Gear-1GS-8800
5000
452 rpm87 263
40004090
3000
2000
4915
3320
1000
50
40
30
10
20
0
Gear-1GS-8000Torque
( Nm )Output( kW )
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
Torque ( 30 min. )
37 kW ( 30 min. )
45 kW ( 25% )
4200
33603435
25202790
1680
840
4130
103 314 538 rpm
50
40
30
10
20
0
Torque( Nm )
Output( kW )
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque ( 30 min. )
Gear-2GS-8600
4500
100 300
36003575
2700
1800
900
4300
2900
0515 rpm
50
40
30
10
20Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque( Nm )
Output( kW )
Torque ( 30 min. )
Gear-2GS-8800
3000
745 rpm143 435
24002475
1800
1200
600
2975
2010
50
40
30
20
10
0
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque( Nm )
Output( kW )
Torque ( 30 min. )
Gear-2GS-8000
3000
0 156
2265
1680
1120
560
2720
1840
476 815 rpm
50
40
30
10
20
Torque( Nm )
Output( kW )Gear-3
GS-8600
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque ( 30 min. )
3000
700 rpm145
24002360
1800
1200
600
2835
1915
380 4400
50
40
30
10
20
Torque( Nm )
Output( kW )
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque ( 30 min. )
Gear-3GS-8800
2000
1130 rpm217
16001635
1200
400
1965
1325
660
800
50
40
30
10
20
0
Torque( Nm )
Output( kW )
Torque ( 25% )
30 kW ( cont. )
Torque ( cont. )
37 kW ( 30 min. )
45 kW ( 25% )
Torque ( 30 min. )
Gear-3GS-8000
Front + Rear Chuck
By installing air or manual chucks on both the front and rear of the spindle, it becomes possible to machining the ends of long work-pieces. This configuration is especially useful in threading pipes.
Rear chuck
ADVANCED TURRET TECHNOLOGY
The curvature of the CURVIC teeth provides a very unique self-
centering feature and wider uniform tooth contact throughout
all the teeth. The CURVIC teeth are hardened to HRC 58, which
ensures the coupling retains its high accuracy characteristics over
long periods of use.
Ø 450 mm diameter super high precision CURVIC couplings with
12,000 Kg of clamping force ensures abundant turret rigidity for
all cutting conditions.
The 12-station heavy-duty servo indexing turret achieves 0.5
second indexing times for adjacent stations and 1 second times
for stations at the opposite end of the disk turret.
The standard 12-station turret is capable of turning Ø 380 mm
diameter work pieces without causing interference even when
using boring tools.
Working with the live tooling turret and C-axis control enables
the machine to perform multiple tasks such as turning, milling,
drilling, and tapping. It can prevent machining error causing by
moving the work-piece from one machine to another thus saving
cycle time and manpower.
More powerful than a standard 40-taper machining center, the
live tooling turret is driven by a 9 kW ( 30 min. ) AC double wound
high torque spindle motor to provide ample power, now, even
the toughest of jobs may be tackled without a sweat.
The 12-station live tooling turret offers 12 stations available for
live tooling, live tools rotate in working position only to reduce
power loss and heat.
GOODWAY live tooling turret utilizes advance servo indexing
technology to achieve 0.5 second indexing times for adjacent
stations and 1 second for stations at the opposite end of the disk.
Concave Convex
Curvic Coupling
LIVE TOOLING TURRETS
Cf-axis Output
The Cf-axis and disk brake system provide the most rigid and powerful
type of C-axis control on the market today.
Working with the live tooling turret, the Cf-axis and disk brake system
enables the machine to perform multiple tasks, such as drilling, tapping, and
milling operations, including cylindrical and polar coordinate interpolations,
resembling a 4th-axis rotary table on a machining center.
With the FANUC servo motor generating an ultra high resolution of 1,000,000
pulses per spindle rotation and high torque, machined surface finishes are
much superior than Cs-axis ( driven by spindle motor ) equipped machines.
Plus, dynamic accuracy is within ± 0.02˚ even under heavy cutting loads.
7
8
ULTIMATE C-AXIS SPINDLE
C-axis Z-axis
Cylindrical Interpolation.
C-axis
X-axis
Polar Coordinate Interpolation.
( N-m ) ( kW )
0 5 1510 20 rpm
500
1000
1500
2000
2
4
6
8
1350
3
1800
OutputTorque
0 7 14 21 28 rpm
( N-m ) ( kW )
500
10001026
1500
2000
2
4
6
8
1296
3
OutputTorque
GS-8000
GS-8600 / GS-8800
Y-axis travel direction
Grooving with Finish Pass Using Y-axis
Finish Grooving
Grooved pro�le
Required groovepro�le
Grooving by Polar Coordinate Interpolation
Super large Y-axis travel is of 320 mm, which can easily fulfill machining conditions for large size work pieces in aerospace, shipbuilding and energy industries.
Y-axis control fur ther enhances multi-tasking
live tooling capabilities and improves various
machining precision. High precision grooving and
X-axis off-center drilling are enabled.
The low center of gravity box way is designed with a
wide span structure to increase overall rigidity.
The 45˚ angle of X and Y axes allows the center of
gravity of the turret to remain in the saddle guide way
to ensure machining accuracy and decrease distortion.
Y-AXIS MACHINING CAPABILITY
Grooving with Y-axis control produces
grooves with higher accuracy.
Super large Y-axis travel
320 mm = ±160 mm
X-axis
Y-axis
CA-3045
CA-3044
CA-3382
CA-3354D
ER50
ER50
VI-3674
CA-3377C
VI-3680
VI-3676VI-3690
32□
32□
MT Type
CA-3045
CA-3044
CA-3050
CA-3052
CA-3051CA-30A0
( MT Type )
32□
32□
GENERAL DIMENSION
【 12-Station Turret 】
【 12-Station Turret 】
【 Y-axis 】
【 12-Station Live Tooling Turret 】
Interference Diagram
Tooling System
【 12-Station Live Tooling Turret 】
9
10
Unit : mm
40 X-axis travel : 525465 40
455
50
Spin
dle c
ente
r lin
e
50M
ax. :
120
Ø420
Ø380
Ø375
50
Ø970Max. turning dia.
X-axis travel : 525
Ø390
60
X-axis travel : 540
50
Spin
dle
cent
er lin
e
460X-axis travel : 54065
Ø375
65
97141
Max
. : 1
50
45
475
Ø370
Ø410
5090
Ø365
Ø1,040
Ø960
Max. turn
ing dia.
60
X-axis travel : 515
50
Spin
dle
cent
er lin
e
435X-axis travel : 51565
Ø375
97141
Max
. : 1
50
45
450
160 160
145
210
X-ax
is tr
avel
: 51
5
160160
X-ax
is tr
avel
: 51
592
68Ø370
Ø410
5090
Ø365
65
Ø910
Max. tu
rning dia.
Ø1,040
O.D. Tools O.D. Tools
O.D. Tools O.D. Tools
O.D. Tool Holder
I.D. Tool Holder
Face Tool Holder
I.D. Tools
I.D. Tools
I.D. Tools
I.D. Tools
Sleeve( Coolant Through )
Sleeve( Coolant Through )
Sleeve
Sleeve
Sleeve
Sleeve
Sleeve
Sleeve
Collet
Collet
0° Live Tool Holder
I.D. Tool Extension Holder
Face Tool Extension Holder
O.D. Tool Holder
90° Live Tool Holder
I.D. Tools
I.D. Tools
I.D. Tools
I.D. Tools
Drill
Drill
Drill
Drill
Drill
Drill
Face Milling Tool
【 12-Station Live Tooling Turret 】
【 Y-axis 】
【 12-Station Turret 】
240
540
540
263
34148528
MT#6
270
100
460
60
405 48
0
90
100 375
145
LM 2: 1,200 L2M : 2,200 L3M : 3,200
LM : 1,100 L2M : 2,100 L3M : 3,100
L4M : 4,200 L5M : 5,200 L6M : 6,200
L4M : 4,100 L5M : 5,100 L6M : 6,100
LM2 : 1,000 L2M : 2,000 L3M : 3,000L4M : 4,000 L5M : 5,000 L6M : 6,000
Max. Z-axis Travel
Tailstock Travel
Quill Stock
Z-axis Travel
Cove
r
18" Chuck
X-ax
is T
rave
l
X-ax
is T
rave
l
Max. :
Unit : mm
240
51551
5
263
34148528
MT#6
270
100
435
60
360
455
90
100 350
145
LY : 1,200 L2Y : 2,200 L3Y : 3,200
LY : 1,100 L2Y : 2,100 L3Y : 3,100
L4Y : 4,200 L5Y : 5,200 L6Y : 6,200
L4Y : 4,100 L5Y : 5,100 L6Y : 6,100
LY : 1,000 L2Y : 2,000 L3Y : 3,000L4Y : 4,000 L5Y : 5,000 L6Y : 6,000
Max. Z-axis Travel
Tailstock Travel
Quill Stock
Z-axis Travel
Cove
r
18" Chuck
X-ax
is T
rave
l
X-ax
is T
rave
l
Max. :
275
200
100
L : 1,200 L2 : 2,200 L3 : 3,200
L : 1,100 L2 : 2,100 L3 : 3,100
L4 : 4,200 L5 : 5,200 L6 : 6,200
L4 : 4,100 L5 : 5,100 L6 : 6,100
34148528 L : 1,000 L2 : 2,000 L3 : 3,000L4 : 4,000 L5 : 5,000 L6 : 6,000
MT#6
465
4052
5
130
70
405 48
5
175
70
Max. Z-axis Travel
Tailstock Travel
Quill Stock
Z-axis Travel
Cove
r
18" Chuck
X-ax
is T
rave
l
Max. :
TurretTurret
Work Range
11
12
FANUC CONTROL FUNCTIONSDisplay 10.4" color LCD S S
Graphic functionStandard S SDynamic O O
Part program storage sizeOi -TF : each path31i : total
512K bytes S –1M bytes O S2M bytes O O4M bytes – O8M bytes – O
Registerable programsOi -TF : each path31i : total
400 S –1,000 O S4,000 – O
Tool offset pairs
99 – S128 S –200 O O400 – O499 – O999 – O2000 – O
Servo HRV control HRV 3 S SAutomatic data backup S SSynchronous / Composite control O OInch / metric conversion S SPolar coordinate interpolation S SCylindrical interpolation S SMultiple repetitive cycle S SRigid tapping S SUnexpected disturbance torque detection function S SSpindle orientation S SSpindle speed fluctuation detection S SEmbedded macro O OSpindle synchronous control S STool radius / Tool nose radius compensation S SMulti-language display S SPolygon turning S SHelical interpolation O ODirect drawing dimension programming S SThread cutting retract S SVariable lead threading S SMultiple repetitive cycle Ⅱ S SCanned cycles for drilling S STool nose radius compensation S SChamfering / Corner R S SAl contour control Ⅰ O SMulti part program editing*3 S SManual handle retrace O OManual intervention and return S OExternal data input S SAddition of custom macro S SIncrement system C S SRun hour & parts counter S SAuto power-off function S SRS-232 port S SMemory card input / output ( CF + USB ) S SEthernet S S
STANDARD & OPTIONAL FEATURES
SPINDLEMain spindle configuration 3-Speed Gear SRigid tapping & spindle orientation SMain spindle disk brake OCf-axis & disk brake for main spindle OWORK HOLDINGHydraulic hollow cylinder for chuck 205 mm ID. S
Hollow 3-jaws chuck & 1 set soft jaws
18" S21" O24" O32"*1 OAir Chuck O
Hard jaws OSpecial work holding chuck CIn spindle work stopper OSpindle liner ( guide bushing ) OFoot switch for chuck operation SProgrammable base & quill hydraulic tailstock OMT#6 dead center quill OFoot switch for tailstock operation OManual steady rest OSelf-centering hydraulic steady rest OFoot switch for steady rest operation O
Two-stage programmable pressureChuck clamping OTailstock thrust O
TURRET12-station turret S12-station live tooling turret OTool holder & sleeve package SLive tooling tool holders ( 0˚ x 1 , 90˚ x 1 )*2 OMEASUREMENTRENISHAW HPRA tool presetter Removeable OCOOLANT
Coolant pump 3 Kg/cm² S5 Kg/cm² O
High-pressure coolant system 20 Kg/cm² CRoll-out coolant tank SOil skimmer OCoolant flow switch OCoolant level switch OCoolant intercooler system OCHIP DISPOSALChip conveyor with auto timer Right discharge SChip cart with coolant drain OChuck air blow OCoolant gun OOil mist collector OAUTOMATIC OPERATION SUPPORTGantry-type loader / unloader OAuto door O
External M-code output4 sets ( 8 ) O8 sets ( 16 ) O
SAFETYFully enclosed guarding SDoor interlock ( incl. Mechanical lock ) SImpact resistant viewing window STailstock stroke out - end check SChuck cylinder stroke out - end check SChuck cylinder check valve SLow hydraulic pressure detection switch SOver travel ( soft limit ) SLoad monitoring function S
OTHERSTri-color machine status light tower SWork light SExternal work light O
Electrical cabinetHeat exchanger SA/C cooling system O
Complete hydraulic system SAdvanced auto lubrication system SFoundation leveling & maintenance tool kit SEmergency maintenance electrical part package SOperation & maintenance manuals S
GS-8000
GS-8000
Speci�cations are subject to change without notice.Above standard & optional features also apply to L models.*1 Tool setter must be deleted.*2 Standard on M ( live tooling ) models.*3 For servo motor drivern power turret only.
S : Standard– : Not available
O : OptionC : Contact GOODWAY
Oi - TF
31i
MACHINE SPECIFICATIONS
CAPACITY GS-8000L ~ L6 GS-8600L ~ L6 GS-8800L ~ L6
Max. swing diameter Ø 1,030 mm 40.55"
Swing over saddle Ø 810 mm 31.88"
Max. turning diameter Ø 970 mm 38.18"
Max. turning lengthL : 1,200 / L2 : 2,200 / L3 : 3,200 / L4 : 4,200 / L5 : 5,200 / L6 : 6,200 mm L : 47.24" / L2 : 86.61" / L3 : 125.9" / L4 : 165.3" / L5 : 204.7" / L6 : 244"
Max. weight of the work piece 5,000 Kg 11,023 lb
Chuck size 18" ( Opt. 24" )
SPINDLE
Hole through spindle Ø 205 mm 8.07" Ø 260 mm 10.23" Ø 320 mm 12.59"
Spindle bearing diameter Ø 260 mm 10.23" Ø 340 mm 13.38" Ø 400 mm 15.74"
Spindle nose A2-15 A2-15 A2-20
Motor output ( cont. / 15 min. ) 30 / 45 kW
Motor full output speed 1,150 rpm
Spindle drive system 3-Speed Gear
Spindle speed 5 ~ 1,100 rpm 5 ~ 800 rpm 5 ~ 700 rpm
Spindle full output speed
Gear-1 87 rpm 62 rpm 60 rpm
Gear-2 143 rpm 103 rpm 100 rpm
Gear-3 217 rpm 156 rpm 150 rpm
Spindle torque ( cont. )
Gear-1 3,320 N-m 2,448 lb-ft 4,605 N-m 3,396 lb-ft 4,790 N-m 3,533 lb-ft
Gear-2 2,010 N-m 1,482 lb-ft 2,790 N-m 2,057 lb-ft 2,900 N-m 2,139 lb-ft
Gear-3 1,325 N-m 977 lb-ft 1,840 N-m 1,357 lb-ft 1,915 N-m 1,412 lb-ft
Spindle torque ( 30 min. )
Gear-1 4,090 N-m 3,016 lb-ft 5,670 N-m 4,182 lb-ft 5,900 N-m 4,351 lb-ft
Gear-2 2,475 N-m 1,825 lb-ft 3,435 N-m 2,533 lb-ft 3,575 N-m 2,636 lb-ft
Gear-3 1,635 N-m 1,205 lb-ft 2,265 N-m 1,670 lb-ft 2,360 N-m 1,740 lb-ft
Spindle torque ( 25% )
Gear-1 4,915 N-m 3,625 lb-ft 6,815 N-m 5,026 lb-ft 7,090 N-m 5,229 lb-ft
Gear-2 2,975 N-m 2,194 lb-ft 4,130 N-m 3,046 lb-ft 4,300 N-m 3,171 lb-ft
Gear-3 1,965 N-m 1,449 lb-ft 2,720 N-m 2,006 lb-ft 2,835 N-m 2,091 lb-ft
Cf-AXIS ( OPT. )
Cf-axis drive motor AC 3.0 kW 4 HP
Cf-axis rapids 20 rpm 28 rpm 28 rpm
Cf-axis torque output ( cont. ) 1,800 N-m 1,327 lb-ft 1,296 N-m 955 lb-ft 1,296 N-m 955 lb-ft
X & Z AXES
Max. X-axis travel 525 mm 20.66"
Max. Z-axis travelL : 1,200 / L2 : 2,200 / L3 : 3,200 / L4 : 4,200 / L5 : 5,200 / L6 : 6,200 mm
L : 47.24" / L2 : 86.61" / L3 : 125.9" / L4 : 165.3" / L5 : 204.7" / L6 : 244"
X / Z axes rapids 10.5 / 12 m/min. 413 / 472 IPM
Slide way type Box Way
Feed rates 1~ 4,800 mm/min. 1 ~ 189 IPM
X / Z axes servo motor AC 9 kW / AC 7 kW 12 / 10 HP
X / Z axes ball screw diameter Ø 45 / 63 mm 1.77" / 2.48"
X / Z axes thrust ( cont. ) 2,832 / 3,204 Kgf 6,243 / 7,063 lbf
TURRET
Stations 12
Indexing drive Servo motor
Indexing speed 0.5 sec. ( Adjacent ) / 1 sec. ( 180˚ Single step )
O.D. tool shank size □ 32 mm 1-1/4"
I.D. tool shank size Ø 60 mm 2-1/4"
: Metric : Inch
13
14
3,06
5
L : 5,650 L2 : 6,650 L3 : 7,525 L4 : 8,525 L5 : 9,525 L6 : 10,525 3,400L : 6,825 L2 : 7,825 L3 : 8,700 L4 : 9,700 L5 : 10,700 L6 : 11,700 Unit : mm
Machine Layout
LIVE TOOLING TURRET ( OPT. ) GS-8000L ~ L6 GS-8600L ~ L6 GS-8800L ~ L6
Max. turning diameter Ø 960 mm 37.79"
Live tooling stations 12
Live tooling motor output AC 7.5 / 9 kW 10 / 12 HP ( cont. / 30 min. )
Indexing drive type FANUC AC spindle motor
Indexing speed 0.5 sec. ( adjacent ) / 1 sec. ( 180˚ Single step )
O.D. / I.D. tool shank size □ 32 mm 1-1/4" / Ø 60 mm 2-1/4"
Live tooling shank size 0˚ : ER 50 / 90˚ : ER 50
Live tooling RPM range 3,000 rpm
Y-AXIS ( OPT. )
Swing over saddle Ø 720 mm 28.34"
Max. turning diameter Ø 910 mm 35.82"
Max. X / Y axes travel 515 / ± 160 mm 20.27" / ± 6.29"
Y-axis rapids 16 m/min. 630 IPM
Y-axis servo motor AC 7 kW 9 HP
Y-axis ball screw diameter Ø 45 mm 1.77"
Y-axis thrust ( cont. ) 1,602 Kgf 3,531 lbf
TAILSTOCK
Quill center taper MT#6 ( Dead center )
Quill diameter / travel Ø 160 mm / 150 mm 6.29" / 5.9"
Tailstock base travelL : 1,000 / L2 : 2,000 / L3 : 3,000 / L4 : 4,000 / L5 : 5,000 / L6 : 6,000 mm L : 39.37" / L2 : 78.74" / L3 : 118.1" / L4 : 157.4" / L5 : 196.8" / L6 : 236.2"
Programmable quill / base Yes / Yes
GENERAL
CNC controller FANUC Oi -TF ( Opt. 31i )
Voltage / Power requirement AC 220 V / 50 kVA ( L / LM ) 80 kVA ( LY )
Hydraulic tank capacity 40 L 10 gal
Coolant tank capacityL : 660 L / L2 : 770 L / L3 : 880 L / L4 : 990 L / L5 : 1,100 L / L6 : 1,210 L
L : 174 gal / L2 : 203 gal / L3 : 232 gal / L4 : 261 gal / L5 : 290 gal / L6 : 319 gal
Coolant pump 0.5 kW ( 0.75 HP , 60 Hz ) rated at 3 bar ( 44 PSI )
Machine weightL : 17,300 kg / L2 : 19,400 kg / L3 : 21,400 kg / L4 : 23,400 kg / L5 : 25,400 kg / L6 : 27,400 kg
L : 39,000 lb / L2 : 43,000 lb / L3 : 48,000 lb / L4 : 52,000 lb / L5 : 56,000 lb / L6 : 61,000 lb
Dimensions L × W × H
L : 5,650 x 3,400 x 3,065 mm / L2 : 6,650 x 3,400 x 3,065 mm / L3 : 7,525 x 3,400 x 3,065 mm L : 223" x 134" x 121" / L2 : 262" x 134" x 121" / L3 : 297" x 134" x 121"
L4 : 8,525 x 3,400 x 3,065 mm / L5 : 9,525 x 3,400 x 3,065 mm / L6 : 10,525 x 3,400 x 3,065 mm L4 : 336" x 134" x 121" / L5 : 375" x 134" x 121" / L6 : 415" x 134" x 121"
Specifications are subject to change without notice.
: Metric : Inch
Copyright 2019 by Goodway Machine Corp. All rights reserved.G-GS-8000-EN-201907
GOODWAY MACHINE CORP.
No.13, 5Th Road,
Taichung Industrial Park,
Taichung City, 407, Taiwan
E-mail : [email protected]
No. 38, Keyuan Road,
Central Taiwan Science Park.Taichung,
Taichung City, 407, Taiwan
TEL : + 886-4-2463-6000
FAX : + 886-4-2463-9600
GOODWAYCNC.com
GOODWAY MACHINE ( WUJIANG ) CO.,LTDHEADQUARTERS CENTRAL TAIWAN SCIENCE PARK BRANCH
No. 4888, East Lake Taihu Avenue, WujiangEconomic and Technological Development Zone, Jiangsu, ChinaSales Hotline : + 86-512-8286-8068Service Hotline : + 86-512-8286-8066FAX : + 86-512-8286-8620E-mail : [email protected]