Ground Control Station Datasheet
-
Upload
tony-carpio -
Category
Documents
-
view
220 -
download
0
Transcript of Ground Control Station Datasheet
7/27/2019 Ground Control Station Datasheet
http://slidepdf.com/reader/full/ground-control-station-datasheet 1/4
PORTABLE GROUND CONTROL STATIONUAV Factory’s Ground Control Station (GCS) contains all hardware for controlling a high performance unmanned
aircraft vehicles and managing payload. GCS is based on Panasonic’s field proven CF-31 rugged laptop, has additional
17’’ super-bright touch screen payload display, and flexible power system with dual battery setup with advanced
status monitoring features.
GCS can be configured to accept autopilot-specific ground side hardware. GCS is available completely configured for
Procerus Technologies Commbox, please contact for configuration packages for Micropilot, Cloud Cap Technologies or
other manufacturer ground side equipment. Video receiver equipment can be factory integrated into the GCS.With the capability to be powered from 12-32 VDC or
110-240 VAC, the GCS can be used anytime, anywhere.
Integrated hot-swappable dual Lithium battery bays as well
as intuitive battery condition monitoring system will enable
to use the GCS up to 2 hours on a single battery set.
Batteries can be hot-swapped without switching off the
system, allowing for an increase in operation time.
GCS has a set of integrated safety features, including over
voltage protection, over current protection, reverse voltageprotection as well as battery over-discharge protection.
The integrated power supply system can
provide additional 12 VDC, 50 W power
source to auxiliary subsystems such as
tracking antennas or video receivers,
eliminating the need for additional power
supply or batteries.
The GCS is packed into the military grade
transportation case and has internal storagefor joystick, RC-transmitter, mouse and small
components such as wiring, antennas,
external GPS antenna.
UAVFACTORY LTD. I VAT reg.: LV40103258664
Address : 24A-52 Ganibu Dambis, LV1005, Latvia I Tel: +371 29119398 I Fax: +371 63048747
[email protected] I www.uavfactory.com
7/27/2019 Ground Control Station Datasheet
http://slidepdf.com/reader/full/ground-control-station-datasheet 2/4
PORTABLE GROUND CONTROL STATION
MAIN FEATURES:
• Highly integrated portable GCS solution
• Fully rugged Panasonic CF 31 laptop
• Laptop mounted in docking station
• Super-bright 13’’ laptop and 17” secondary touchscreen displays• Advanced internal power system with 12-32 VDC and 110-220 VAC input, display with power
and temperature monitoring
• Dual lithium batteries with hot-swapping function, over discharge protection
• 2 hours of battery operation time
• Internal compartment for wires, antennas, joystick and RC-transmitter
• Industrial grade push-pull electrical connectors
• Allocated internal space for Video/Data receiver ( custom wiring and mounts available)
• 50 W stabilized 12 V output for video receiver, tracking antenna and other auxiliary equipment
• System status monitoring display with audio alarm
AUTOPILOT OPTIONS:
• Mounts and wiring to accept Procerus Technologies Commbox ground hardware
• Mounts and wiring for other manufacturer ground hardware ( Micropilot, Cloud Cap Technologies)
OPTIONAL EQUIPMENT:
• Light, foldable stand with height adjustment
CUSTOM OPTIONS:
• Custom autopilot-specific ground station component integration
• Custom LED indication, switches, labeling
• Custom wiring and electrical contact integration ( e.g. tracking antennas, video receivers)
7/27/2019 Ground Control Station Datasheet
http://slidepdf.com/reader/full/ground-control-station-datasheet 3/4
System statusmonitoring
DockedCF-31
Power input/output,GPS connector,antenna connectors
17” payloadsuper-brighttouch screendisplay
Dual hot-swappableLithium batteries
Autopilot-specificground hardware
Joystick &accessories
7/27/2019 Ground Control Station Datasheet
http://slidepdf.com/reader/full/ground-control-station-datasheet 4/4
UAVFACTORY LTD. I VAT reg.: LV40103258664
Address : 24A-52 Ganibu Dambis, LV1005, Latvia I Tel: +371 29119398 I Fax: +371 63048747
[email protected] I www.uavfactory.com
MECHANICAL SPECIFICATIONS
DIMENSIONS 250 x 830 x 532 mm
WEIGHT 28 kg
CASE Molded plastic case
ENVIRONMENTAL PROTECTION Splash resistant when closed
OPERATING TEMPERATURE -20 to +60 °C
ELECTRICAL SPECIFICATIONS
DC INPUT
12 – 32 V power supplyOver voltage protectionReverse polarity protection
AC INPUT 110 – 240 V power supply50 – 60 Hz
BATTERY TYPE Lithium Ion
BATTERY CAPACITY 86.4 Wh
BATTERY OPERATION TIME 2 hours
COMPUTER SPECIFICATIONS
COMPUTER MODEL Panasonic Toughbook CF-31
DURABILITY MIL-STD-810G & IP65 certified (6' drop)
DISPLAY TYPE 13.1" XGA touchscreen LED 1024x768
BRIGHTNESS 1100 nits
COMPUTER MOUNTING Dock station
CPU Intel Core i5-2520M vPro Processor 2.4GHz (contact for options)
STORAGE Shock-mounted flex-connect hard drive with quick-release
320GB 7200rpm (contact for options)
RAM MEMORY 4GB SDRAM (DDR3-1333MHz) (contact for options)
PAYLOAD DISPLAY SPECIFICATIONS
DISPLAY TYPE 17 " TFT touchscreen 1280 x 1024 (SXGA)
BRIGHTNESS 1600 nits
AUTOPILOT SPECIFIC CONFIGURATION
COMPATIBILITY Directly Compatible with Procerus Technologies Commbox
Other autopilot compatibilities on request
INPUT DEVICES Wireless laser mouse, RC type transmitter (optional), Joystick (optional)