GRILLES - Country Leisure UK - mobile field shelters
Transcript of GRILLES - Country Leisure UK - mobile field shelters
6 earlswoodS U P P L I E S ORDERLINE 0845 017 1351 FAX 0845 017 1352
ANTI-WEAVER GRILLES
CODE SIZE mm (“) FINISH
900-0891 890W x 610H (35” x 24”) Galvanised
900-1041 1040W x 760H (41” x 30”) Galvanised
900-1171 1170W x 760H (46” x 30”) Galvanised
GRILLES
Our anti-weaver grille panels will fit most stable door openings. Each panel is supplied with two sockets and can be easily moved. Available in three sizes. Robust construction from 12mm rod and galvanised finish.
ANTI-WEAVER INFILL PANELS
CODE SIZE FINISH
901-0891 Small – fits item 900-0891 Galvanised
901-1171 Large – fits item 900-1041 & 900-1171
Galvanised
Designed to fit the anti-weaver grilles, our infill panels are manufactured to the same quality and are available in two sizes with galvanised finish.
DOOR GRILLES
CODE SIZE mm (“) FINISH
902-0891 890W x 610H (35” x 24”) Galvanised
902-1041 1040W x 760H (41” x 30”) Galvanised
902-1171 1170W x 760H (46” x 30”) Galvanised
These door grilles will effectively enclose a stable. Available in three sizes and supplied with two sockets per grille. They are interchangeable with anti-weaver panels, strong construction and galvanised finish.
GRILLE SOCKETS
CODE FINISH
903-0001 Galvanised
Additional sockets for securing all of our door grilles. Designed for continuous use and galvanised for good protection.
INTERNAL STABLE GRILLES
CODE SIZE mm (“) FINISH
934-0891 890W x 610H (35” x 24”) Galvanised
934-1041 1040W x 760H (41” x 30”) Galvanised
934-1171 1170W x 760H (46” x 30”) Galvanised
Manufactured to the same specification as the door grilles, our internal grilles are designed for building into a dividing wall between stables. Robust construction with 12mm rods and galvanised finish. Available in three sizes, complete with holes for fixing.
Section 2 – Stable Equipment
7EmAIL [email protected] WEBSITE www.earlswood-supplies.com
HEAVY DUTY STABLE GRILLES
CODE SIZE mm (“) FINISH
941-1221 1215W x 760H (48” x 30”) Galvanised
941-1831 1823W x 760H (72” x 30”) Galvanised
GRILLES
Our heavy duty grilles can be used for internal stables, or built into partition walls. Constructed from 22mm diameter bars with narrower spacing than our other grilles for safety. Available in two sizes although other sizes are available for special order. Galvanised finish for durability, complete with fixing holes.
HEAVY DUTY CORNER HAYRACKS
HEAVY DUTY WALL HAYRACK
CODE SIZE (mm) FINISH
904-0761 500H x 760W x 420D Galvanised
This large traditionally designed hayrack will fit onto any flat surface. Manufactured to the same quality standard as our corner hayrack, galvanised finish for durability.
HAYRACKS
CODE SIZE (mm) FINISH
904-0631 630H X 860W X 530D Galvanised
This robust hayrack will fit into any 90° corner and has a good capacity. Heavy 12mm diameter bars welded to a strong frame in galvanised finish for durability.
EASY FIX WINDOW GRILLE SET
Easy to fit, bars and frames can be cut to length for shorter windows or joined together to fit any width window. Galvanised construction for durability.
CODE SIZE mm FINISH
934-2001 1000W x 1000H Galvanised
WINDOW GRILLES
CODE SIZE mm (“) FINISH
944-0761 760W x 940H (30” x 37”) Galvanised
944-1181 1180W x 940H (461/2” x 37”) Galvanised
These window grilles are heavy duty, allowing security and adequate ventilation for a top opening fanlight window. Offered in two widths to suit most windows. Galvanised construction and fixing holes.
CORNER HAYRACK
CODE SIZE (mm) FINISH
905-0872 530H x 870W x 610D BZP
A lighter duty but strong hayrack to fit any 90° corner of a stable. Welded wire mesh construction and supplied with four fixing clips. BZP finish for protection.
8 earlswoodS U P P L I E S ORDERLINE 0845 017 1351 FAX 0845 017 1352
WALL HAYRACK
CODE SIZE (mm) FINISH
906-0902 500H x 900W x 400D BZP
HAYRACKS
Our popular hayrack can be fitted to any flat surface and will suffice formost feeding requirements. Strong mesh construction, supplied with fourfixing clips, BZP finish.
CORNER HAYLAGE RACK
CODE SIZE (mm) FINISH
907-0872 530H x 870W x 610D BZP
Our haylage rack has a finer mesh to reduce wastage and is made to thesame standard as our corner hayrack. Versatile and functional, this issupplied with four fixing clips, BZP finish.
WALL HAYLAGE RACK
CODE SIZE (mm) FINISH
908-0902 500H x 900W x 400D BZP
This angled feeder will fit onto a flat surface. It has a finer mesh like thecorner version and comes complete with four fixing clips, in BZP finish.
HAYRACK FIXING CLIPS
Spare clips for fixing all our standard hayracks. Packed in a set of four. BZP finish.
CODE FINISH
909-0002 BZP
CHEW PROTECTOR STRIPS
A galvanised chew strip to protect the top of a stable door. Will fit most patterns and can be cut to length. ALL OTHER METAL PLATES AND DOOR PROTECTORS CAN BE MANUFACTURED TO SPECIFIC REQUIREMENTS.
CODE SIZE mm (“) FINISH
934-3012 1190W (463/4) Galvanised
LOUVRE JAmB SETS
These are supplied in parts and can be fitted into a stable window aperture. Available in two sizes
CODE SIZE (mm) FINISH
934-5032 305H (2 Blades) Aluminium
934-5082 864H (6 Blades) Aluminium
STABLE ACCESSORIES
Section 2 – Stable Equipment
9EmAIL [email protected] WEBSITE www.earlswood-supplies.com
mANURE COLLECTOR AND RAKE SET
STABLE ACCESSORIES
CODE FINISH
916-2582 Black, Blue, Green, Pink, Purple, Red
Our high quality moulded manure scoop is complemented by a rake with rear scraper blade. Excellent for use on all types of bedding and all floors including grass. It is manufactured in one piece construction with a PVC grip.
mANURE RAKE
CODE FINISH
915-0802 BZP
mANURE COLLECTOR
CODE FINISH
916-0582 Black, Blue, Green, Pink, Purple, Red
HOOK-OVER mANGER
A very popular feeder which will fit over any fence or gate. Durable and strong.
HOOK-OVER mANGER WITH HANDLE
Similar in design and construction to our standard hook-over manger. This product has the added versatility of a handle.
CORNER mANGER
Our popular feeder is normally used with a support frame.
CORNER mANGER SUPPORT FRAmE
Tubular frame for use with 921-0649 manger.
CODE FINISH
917-0399 Black, Blue, Green, Pink, Purple, Red, White
CODE FINISH
932-0399 Black, Blue, Green, Pink, Purple, Red, White
CODE FINISH
921-0649 Blue, Green, Pink, Purple, Red, White
CODE FINISH
926-0642 BZP
10 earlswoodS U P P L I E S ORDERLINE 0845 017 1351 FAX 0845 017 1352
TYRE BOWL
Our round feeding bowl will fit into any old 14” tyre. Made from strong polyethylene.
CODE FINISH
920-0539 White
STABLE ACCESSORIES
mUCK BUCKET
Our product is the ‘original’ muck bucket. Very strong construction for durability, complete with rope handles.
CODE FINISH
956-0003 Green
2 GALLON AGRICULTURAL BUCKET
A useful size bucket calibrated in gallons and litres.
CODE FINISH
957-0002 Green
SmALL FEED BUCKET
A flexible bucket.
CODE FINISH
957-0022 Blue, Green, Red
3-GALLON STABLE BUCKET
Our strong stable bucket is durable for everyday use. Will also fit in our bucket holder. Has a moulded spout for easy pouring.
CODE FINISH
957-0003 Black, Blue, Green, Pink, Purple, Red, Yellow
HEAVY DUTY 3-GALLON BUCKET
An industrial bucket with a wide pouring lip. Calibrated in gallons and litres.
CODE FINISH
957-0013 Black, Yellow
Section 2 – Stable Equipment
11EmAIL [email protected] WEBSITE www.earlswood-supplies.com
STABLE ACCESSORIES
FEED/mIXER BUCKET
A tough and versatile bucket for general use. Made to last.
CODE FINISH
959-0008 Black, Blue, Burgundy, Green, Pink, Purple, Red, White, Yellow
RUBBER FEED SKIP
Durable and made from recycled rubber. These feed skips come in two sizes
CODE FINISH
967-2250 Small (2¼ gallon)
967-2500 Large (5¼ gallon)
12 LITRE GALVANISED BUCKET
A durable bucket which can be cleaned easily
4-GALLON FLAT SIDED BUCKET
Tough and strong, our popular bucket is designed to hang against a wall without spilling. Can be used with 910-0001 bucket holder clip.
CODE FINISH
958-0039 Black, Blue, Green, Red, White
BUCKET HOLDER
CODE DESCRIPTION FINISH
935-0323 Light duty wall fix Black, Red
936-0323 Light duty hook over Black, Red
937-0321 Heavy duty wall fix Galvanised
938-0321 Heavy duty hook over Galvanised
Two types of bucket holder are available and will suit most types of bucket. Our light duty version is available in a powder-coated finish and the heavy duty version is constructed from thicker material and comes in a galvanised finish. Both versions are available for fixing to a wall or for hooking over.
CODE FINISH
963-0121 Galvanised
12 earlswoodS U P P L I E S ORDERLINE 0845 017 1351 FAX 0845 017 1352
FLEXI TUBS
CODE SIZE (mm) FINISH
961-0123 12 Litre Black, Light Blue, Light Green, Purple, Pink, Red
961-0263 26 Litre Black, Light Blue, Light Green, Dark Green, Purple, Pink, Red, Yellow
961-0403 40 Litre Standard colours: Black, Light Blue, Dark Green, Light Green, Lilac, Orange, Purple,
Pink, Red, Silver, Sky Blue, Yellow. Bright colours: Fluorescent Green,
Fluorescent Orange, Fluorescent Pink, Fluorescent Yellow, Luminous, Cerise Glitter.
Aromatubs: Apple, Banana, Grass,Mint, Orange, Rose, Strawberry.
961-0753 75 Litre Black, Dark Green, Yellow
Our Flexi-tubs have 1000’s of uses and are ideal for all equestrian requirements. There are four sizes available. Small (12L), Medium (26L), Large (40L) and Extra Large (75L). Available in a variety of bright and standard colours with the greatest choice available in the 40 Litre size. We also have 40 Litre ‘Aromatubs’ available that release a fresh fragrance.
RHINO RUNNA
A fold down trolley for carrying a 40 Litre tub. Easy to use and folds flat for hanging on a wall. (Flexi tub not included)
CODE FINISH
962-0403 Black, Green, Pink, Purple
WATER CONSERVER / HAY SOAKER
A 110 litre bin complete with a tap. Ideal for soaking hay or use as a water butt.
CODE
957-0099
STABLE ACCESSORIES
DUSTBIN AND LID
A durable dustbin with a clip on lid. 110 litre. Ideal for storing feed.
CODE FINISH
957-0090 Black, Blue, Red
Section 2 – Stable Equipment
13EmAIL [email protected] WEBSITE www.earlswood-supplies.com
FEED BINS
Galvanised steel bin with a hinged sloping lid. Designed for storing feed and is rodent proof. Available as a single unit or with two or three partitions.
CODE TYPE
970-1001 Single feed bin
970-2001 Double feed bin
970-3001 Triple feed bin
STABLE ACCESSORIES
DRINKING BOWLS
We offer two types of drinking bowls. Both are self filling with a float switch. Easy to install. Available in Galvanised or Plastic.
CODE FINISH
968-1001 Galvanised
968-2009 Plastic
SALT LICK HOLDER
A traditional holder manufactured from steel designed to hold standard brick type salt blocks.
CODE FINISH
922-0123 Black, Red
SALT LICK HOLDER
Our wire formed holder will retain a salt block securely and can be fixedanywhere.
CODE FINISH
922-0113 Black, Red
STUD CARD HOLDER
CODE SIZE FINISH
923-0103 Small Black, Red
923-0153 Large Black, Red
923-0175 Small replacement cards
923-0205 Large replacement cards
Securely displays horse details on stable door. The card is reversible and comes in a PVC wallet for durability. Spare cards are available.
14 earlswoodS U P P L I E S ORDERLINE 0845 017 1351 FAX 0845 017 1352
PLASTIC FEED SCOOP
Marked with graduations for accurate measuring.
CODE FINISH
919-0009 Blue, Red, Green
STABLE ACCESSORIES
PLASTIC ROUND BOWL SCOOP
Our plastic scoop is very strong and marked with graduations.
CODE FINISH
954-0449 Black, Blue, Magenta, Purple, Red, Yellow
PLASTIC STIRRER
This product complements our round bowl scoop. Made from heavy duty material and complete with hanging hook.
CODE FINISH
955-0519 Black, Blue, Magenta, Purple, Red
STABLE / TRAVEL mIRROR
CODE SIZE
960-0607 600 x 450mm
960-0807 800 x 600mm
960-1207 1200 x 800mm
960-1217 1200 x 1200mm
Designed to reduce stress in a horse. The benefits of a stable or travel mirror are appreciated by anyone who has used one. Our mirrors are produced from acrylic which can be mounted on a flat wall, or plywood backing for an uneven surface. We offer four standard sizes, but any other size can be produced.
BUCKET CLIP
A galvanised spring clip for holding a bucket against a wall. The staple is welded for durability.
CODE FINISH
910-0001 Galvanised
Section 2 – Stable Equipment
15EmAIL [email protected] WEBSITE www.earlswood-supplies.com
TIE RING
Two lengths of tie ring are available for different fitting thicknesses.The BZP eyebolts are fully threaded and include one nut and one washer.
CODE LENGTH
911-0112 110mm Shank
911-2502 250mm Shank
STABLE ACCESSORIES
RING ON PLATE
Our popular Ring on Plate can be screwed anywhere for tying up a horse.Heavy duty ring with welded staple and available in galvanised or BZP finish.
CODE FINISH
246-0501 Galvanised
246-0502 BZP
HEAVY DUTY RING ON PLATE
This product has a larger backplate which can be fixed with coach screws or bolts. Galvanised finish.
CODE FINISH
246-1501 Galvanised
STAPLE ON PLATE
This product can be used for many applications. The welded staple issufficient for use with a padlock. Galvanised finish.
CODE FINISH
245-0501 Galvanised
HOOK ON PLATE
Our Hook on Plate will hold a rope or chain securely. Screw fixings andgalvanised finish.
CODE FINISH
244-0501 Galvanised