Gravimetric Analysis Ppt Chem
-
Upload
delicz-tan -
Category
Documents
-
view
383 -
download
39
description
Transcript of Gravimetric Analysis Ppt Chem
-
5/24/2018 Gravimetric Analysis Ppt Chem
1/19
-
5/24/2018 Gravimetric Analysis Ppt Chem
2/19
Weighing the sample Forming a precipitate Filtering the solution Weighing the dry precipitate
This analytical technique includes: Empirical formula and Molecular formula
Gas equations Eg. Pv=nrt
Percentage of water/ measuring water content
Limiting and Excess reactant equations
Precipitation reactions
Key steps in a
precipitation reaction-
what this looks like
-
5/24/2018 Gravimetric Analysis Ppt Chem
3/19
#1: Accurately weigh the
mixture to be analysed.
#4: Filter off the precipitate
and wash it with a small
quantity of substance.
#2: Dissolve the mixture in a
suitable solvent; filter off anddiscard any insoluble material.
#3: Add an excess amount of
solution, that will form a
precipitate with the substance
being analysed.
#5: Dry the precipitate and,
cool and accurately weigh.Repeat until a constant mass is
achieved.
-
5/24/2018 Gravimetric Analysis Ppt Chem
4/19
Gravimetric analysis is a technique through which the
amount of an analyte (the ion being analyzed) can be
determined through the measurement of mass.
Gravimetric analysis depend on comparing the masses of
two compounds containing the analyte.
http://www.youtube.com/watch?v=g6nXg
zjW7nw&feature=related
http://www.youtube.com/watch?v=g6nXgzjW7nw&feature=relatedhttp://www.youtube.com/watch?v=g6nXgzjW7nw&feature=relatedhttp://www.youtube.com/watch?v=g6nXgzjW7nw&feature=relatedhttp://www.youtube.com/watch?v=g6nXgzjW7nw&feature=related -
5/24/2018 Gravimetric Analysis Ppt Chem
5/19
Advantages
Precise measurement/
high degree of accuracy
(6-figure)
Helps in determination ofatomic mass, of elements
Doesnt require a series of
standards to calibrate the
unknown solution
concentration Helps in calibration of
other instruments
Disadvantages
Limited group of
elemental analysis
Convoluted methods
Only suitable for highconcentrations
-
5/24/2018 Gravimetric Analysis Ppt Chem
6/19
Gravimetric analytical data is interpreted from the
weighing of the precipitate at the end of the experiment.
To do this, you must weigh the instrument in which the
precipitate will be weighed in, note the weight, and then
weigh the precipitate. The solid weight is determined bythe difference between the two.
-
5/24/2018 Gravimetric Analysis Ppt Chem
7/19
Calibration is predominantly undertaken by gravimetricanalysis and is the method most commonly used bylaboratories accredited to ISO17025. There are colorimetricmethods in use and these are often used for checking pipettesand for non-accredited calibration. Gravimetric analysis ispreferred due to the simplicity and the traceability to an
absolute standard. Gravimetric methods are also oftenrecognsied as a more economical way of calibration.
Gravimetric analysis for pipette calibration entails dispensingsamples of distilled water into a receiving vessel in aprecision analytical balance. The density of water is a known
constant, the temperature, barometric pressure and humidityare recorded (the Z-factor used in the final mass calculation)and kept within certain limits and thus the mass of thedispensed sample provides an accurate indication of thevolume dispensed.
-
5/24/2018 Gravimetric Analysis Ppt Chem
8/19
Determination of atomic
mass of elements
Purity evaluation
Determining water content of
complex materials. Eg. Food
and soil
Treating ore (part
of earths layer)
-
5/24/2018 Gravimetric Analysis Ppt Chem
9/19
Geomarine survey systems
A chunk of ore is treated with concentrated nitric acid and
potassium chlorate to convert all of the sulfur to sulfate.
The nitrate and chlorate are removed by treating the
solution with concentrated HCl. The sulfate is precipitatedwith Barium and weighed as BaSo4.
Monitoring the air
Sulfate with
nitrate and
chlorate
Concentrated HCl to
remove nitrate and
chlorate BaSO4
-
5/24/2018 Gravimetric Analysis Ppt Chem
10/19
Gravimetric analysis obtains more accurate data about the
composition of a sample than volumetric analysis does,
however it takes longer to perform in the laboratory.
Gravimetric analysis is analysis by weight, where as
volumetric analysis is by volume. Gravimetric analysis is less sensitive to temperature than
volumetric analysis is.
volumetricGravimetric-less sensitive
Temp.
Gravimetric-weight
Volumetric- volume
-
5/24/2018 Gravimetric Analysis Ppt Chem
11/19
-
5/24/2018 Gravimetric Analysis Ppt Chem
12/19
Looks like a titration/ same as
Measure from bottom of meniscus
Wherever there is a concentration of a known solution, to
be found, then volumetric analysis is the method to use.
Quantative analytical technique
Measure from bottom
of meniscus
Titration/
volumetric
analysis
-
5/24/2018 Gravimetric Analysis Ppt Chem
13/19
Steps
Clean the pipette and rinse it with a
bit of the solution to be used.
Clean a conical flask using distilled
water.
Pipette the specified volume of one
reactant into the flask.
Rinse down the edges of the flaskwith distilled water.
Add the indicator if required.
Clean the burette and rinse with bit
of the second reactant solution. Fill
with the solution. Does not need to
be exactly on zero. Note the reading
on the bottom of the meniscus.
Perform a preliminary (rough)
titration by running the burette
solution into the flask, making sure to
swirl the mix, until the end point is
reached.
Read the meniscus again. Subtract the
first reading to find the volume
added.
Repeat the first 5 steps.
Read the burette and perform an
accurate titration by repeating step
7.
Stop as soon as the end point is
reached.
Subtract the initial reading from theend point reading to give an accurate
titre.
Repeat the accurate titration (steps
9-12) at least twice more. The titres
should be within 0.1cm of each other.
Take an average of your three
accurate titres. Use this as the
volume added in the calculations.
http://www.youtube.com/watch?v=8UiuE
7Xx5l8&feature=fvsr
http://www.youtube.com/watch?v=8UiuE7Xx5l8&feature=fvsrhttp://www.youtube.com/watch?v=8UiuE7Xx5l8&feature=fvsrhttp://www.youtube.com/watch?v=8UiuE7Xx5l8&feature=fvsrhttp://www.youtube.com/watch?v=8UiuE7Xx5l8&feature=fvsr -
5/24/2018 Gravimetric Analysis Ppt Chem
14/19
Equipment
-
5/24/2018 Gravimetric Analysis Ppt Chem
15/19
Advantages
Fast and easy to perform
Only basic laboratory
equipment needed
Very cheap Accurate results
Different methods
available for different
substances
Disadvantages
Relatively large sample
size needed
Only suitable for relatively
high concentrations
-
5/24/2018 Gravimetric Analysis Ppt Chem
16/19
Data is interpreted by using three concordant titres. These
help to give accurate results and need to be within 0.1 of
each other.
Concordant titres- they shouldall be a similar colour
-
5/24/2018 Gravimetric Analysis Ppt Chem
17/19
To ensure proper measurement of
large volumes in the laboratory,
volumetric apparatus should be
calibrated regularly. Two of the most
common apparatus calibrated are
volumetric flasks and serological
pipettes.
*If the error is more than 0.03% then
the apparatus should be discarded or
changed into a volumetric apparatus
Manual procedure via volumetric flask
- Weigh the volumetric flask.
- Fill the volumetric flask with distilled
water, up to the mark
- Weigh the volume of distilled water
contained in the flask.
- Calculate the true volume of
glassware via the formula
- Record the data
- Do the same procedure with the
serological pipette.
- Record again your data.
-
5/24/2018 Gravimetric Analysis Ppt Chem
18/19
Used in bio diesel manufacture to ensure that the mix has
a neutral pH.
To determine the amount of acetic acid in manufactured
vinegar.
To determine fatty-acid content and unsaturated-fatty acidcontent.
Brain imaging and MR imaging, as well as routine clinical
use.
Suitable for direct titrations
Suitable in Determination of iron
Manufactured
vinegar
brain imaging
-
5/24/2018 Gravimetric Analysis Ppt Chem
19/19
Compared to other analysis; for example gravimetric
analysis, volumetric analysis is less accurate and less
reliable.
In volumetric analysis, you are more likely to encounter
limits of sensitivity in volume measurements, compared toother analytical techniques.
A mass is generally easier to determine and standardize
than a concentration.
Errors associated with volume measurements are
minimized in other analytical techniques, such asgravimetric analysis.
Volumetric analysis less accurate