grassland machinery
description
Transcript of grassland machinery
Tel: 0048 12 2693114
Fax: 0048 12 2674454
Sales program
2009
Grassland . • Chain harrows • Ballast rollers • Flair toppers • Drum mowers • Disc mowers • Tedding and raking machines • Wrapping machines • Balers • Weeders
• Forage harvester • Corn chaff cutter • Feeders
Chain harrow
Closed frame of angle steel, hydraulic folding with 1 cylinder
Cast tines
Number of rows Folding Type Weight
/kg/ Ref. no.
Cast tines /folding
Number of rows Type Weight
/ kg/ Ref. no.
Working width 3 m Working width 5 m light 3 mech. 3L 250 1097 light, mech. 3 5L 350 1111 light 4 mech. 3L/4 280 1098 light, mech. 4 5L/4 380 1112
heavy 3 mech. 3S 260 1099 light, hydr. 3 5LH 380 1113 heavy 4 mech. 3S/4 290 1100 light, hydr. 4 5LH/4 410 1114
Working width 4 m heavy, mech. 3 5S 360 1115 light 3 mech. 4L 270 1101 heavy, mech. 4 5S/4 390 1116 light 4 mech. 4L/4 300 1102 heavy, hydr. 3 5SH 390 1117 light 3 hydr. 4LH 300 1103 heavy, hydr. 4 5SH/4 420 1118 light 4 hydr. 4LH/4 330 1104 Working width 6 m
heavy 3 mech. 4S 280 1105 light, hydr. 3 6LH 470 1121 heavy 4 mech. 4S/4 310 1106 light, hydr. 4 6LH/4 520 1122 heavy 3 hydr. 4SH 310 1107 heavy, hydr. 3 6SH 490 1123 heavy 4 hydr. 4SH/4 340 1108 heavy, hydr. 4 6SH/4 540 1124 Working width 8 m
light, hydr. 3 8LH 590 1131 light, hydr. 4 8LH/4 650 1132 heavy, hydr. 3 8SH 620 1133 heavy, hydr. 4 8SH/4 680 1134
Box-3-point linkage for 5- and 6-mtr. chain harrows extra charge
Box-3point linkage and reinforced hinge for 8 mtr. 4 rows chain harrows – standard
Chain harrow
Closed frame of angle steel, box-3-point linkage, 2 cylinders
Cast tines
Number of rows Folding Type Weight
/kg/ Ref. no. Type Weight
/kg/ Ref. no.
Working width 4 m
Working width 5 m
heavy 3 mech. 4m/k/c/3b 324 0804 5m/k/c/3b 399 0812 heavy 4 mech. 4m/k/c/4b 370 0805 5m/k/c/4b 470 0813 heavy 3 hydr. 4m/k/c/3b+h 345 0806 5m/k/c/3b+h 420 0814 heavy 4 hydr. 4m/k/c/4b+h 391 0807 5m/k/c/4b+h 491 0815
Working width 6 m
light 3 hydr. 6m/k/c/3a+h 455 0816 light 4 hydr. 6m/k/c/4a+h 495 0817
heavy 3 hydr. 6m/k/c/3b+h 505 0818 heavy 4 hydr. 6m/k/c/4b+h 561 0819
Chain harrow
Open frame of angle and tubular steel, hydraulic fo lding with 2 cylinders, box - 3 -point linkage of steel sheet
Cast tines
Number of tines Folding Type Weight
/kg/ Ref. no. Type Weight
/kg/ Ref. no.
Working width 4 m Working width 5 m heavy 4 mech. R-4S/4 376 1146 R-5S/4 469 1154 heavy 4 hydr. R-4SH/4 397 1148 R-5SH/4 490 1156
Working width 6 m Working width 8 m heavy 4 hydr. R-6SH/4 591 1160 R-8SH/4 940 1164
Chain harrow Construction of angle and tubular steel, 2-cylinders, special cast tine
Closed frame
Cast tines
Number of rows Folding Type Weight
/kg/ Ref. no. Type Weight
/kg/ Ref. no.
Working width 4 m Working width 5 m S 4 mech. 4m/K/C/4S 410 1170 5m/K/C/4S 503 1172 S 4 hydr. 4m/K/C/4S+H 431 1171 5m/K/C/4S+H 524 1173
Working width 6 m S 4 hydr. 6m/K/C/4S+H 598 1174
Open frame
Cast tines
Number of rows Folding Type Weight
/kg/ Ref. no. Type Weight
/kg/ Ref. no.
Working width 4 m
Working width 5 m
S 4 mech. 4m/R/C/4S 416 1180 5m/R/C/4S 529 1182 S 4 hydr. 4m/R/C/4S+H 437 1181 5m/R/C/4S+H 550 1183
Working width 6 m
Working width 8 m
S 4 hydr. 6m/R/C/4S+H 667 1184 8m/R/C/4S+H 1026 1185
Ballast roller
• One or two parts ballast roller • One piece or divided axis • Solid frame • Wall thickness 14mm • Rounded edges • Spring gatherer • Water filling pipe • Hydraulic chassis only in the models WNDH and WDH
One part rollers
Weight Ref. Working
width Transport
width
Diameter.
/ø mm/ Type empty /kg/ no.
2,50 m 2,70 m 1016 WND 1,0/250 1200 1001 2,50 m 2,70 m 1016 WNDH 1,0/250 1500 1002 2,75 m 2,95 m 1016 WND 1,0/275 1260 1003 2,75 m 2,95 m 1016 WNDH 1,0/275 1560 1004 2,50 m 2,70 m 1220 WND 1,2/250 1450 1005 2,50 m 2,70 m 1220 WNDH 1,2/250 1750 1006 2,75 m 2,95 m 1220 WND 1,2/275 1530 1007 2,75 m 2,95 m 1220 WNDH 1,2/275 1830 1008
Two parts rollers
Weight Ref. Working
width Transport
width Diameter.
/ø mm/ Type empty /kg/ no.
2,50 m 2,70 m 1016 WD 1,0/250 1250 1010 2,50 m 2,70 m 1016 WDH 1,0/250 1550 1011 2,75 m 2,95 m 1016 WD 1,0/275 1320 1012 2,75 m 2,95 m 1016 WDH 1,0/275 1620 1013 2,50 m 2,70 m 1220 WD 1,2/250 1520 1014 2,50 m 2,70 m 1220 WDH 1,2/250 1820 1015 2,75 m 2,95 m 1220 WD 1,2/275 1600 1016 2,75 m 2,95 m 1220 WDH 1,2/275 1900 1017
Extra charge: Ref. no. Hydraulic brake of the chassis axle 1020 Hydraulic shoe brake for one part roller
1021
Hydraulic shoe brake for two parts roller
1022
Set of frames for a 3-rollers system 1023 Wiring system 1024 Hand brake 1025 Hydr. system control from tractor 1026
Flail topper
Working width 1, 80 central or side, 2,70m and 3,60m central
Model Z032 Z032/1 Z-032/2 Z-032/3
Mowing width (m) 1,80 2,70 3,60 Mowing height (cm) 2 - 10 2 - 10 2 - 10 Length/width/height (m) 1,56/2,10/1,06 1,56/2,99/1,06 1,56/3,88/1,06 Number of drums and tines (pcs) 2 / 4 3 / 6 4 / 8 Power demand (HP) 30 45 60 Working speed (km/h) 5 - 12 5 - 12 5 - 12 Capacity (ha/h) 1,0 -2,2 1,5 - 3,4 2,0 - 4,3 Weight (kg) 380 460 620
PTO-shaft (Nm) 400 400 400
Ref. no. 1220 1221 1222 1223
Drum mower Deutz-Fahr licence
• Very durable • Doesn’t damage root system of plants • High quality and technical reliability • High efficiency • Simple and checked construction • Easy service • PTO-shaft 540 r/min. • Fast cutter change • Powder painted
Model KB-135 KB-165 KB-185 KB-210 Ref. no. 1201 1203 1204 1205 Mowing width (m) 1,35 1,65 1,85 2,10 Number of drums/tines (pcs) 2 / 4 2 / 6 2 / 6 2 / 8 Power demand (HP) 24 40 60 75 Capacity (ha/h) 1,4 1,7 2,0 2,4 Max working speed (km/h) 15 15 15 15 Mowing height Low (cm) 32 32 - - Standard (cm) 42 42 42 42 PTO-shaft (Nm) 270 400 400 460
Extra charge: Ref. no.
Hydraulic for KB-165 Hydraulic for KB-185 and KB-210 PTO 270 Nm for KB-135 KW01 PTO 400 Nm for KB-165, KB-185 and KBC-185
KW02
PTO 400 Nm for KB-210 and KBC-210 KW03
Drum mower
PZ-Zweegers licence • Reliable and failure-free construction • High standard and safety of work • Powder painted
Model PZ-133 PZ-175 Ref. no. 1201PZ 1203PZ Mowing width (m) 1,35 1,65 Number of drums/tines (pcs.) 2 / 4 2 / 6 Power demand (HP) 25 31 Capacity (ha/h) up to
1,6 up to 2
Transport length (m) 1,15 1,45 Transport width (m) 2,50 2,90 Mowing height (mm) 40 40 Weight (kg) 300 400 PTO-shaft 270 400
Extra charge Ref. no. PTO-shaft 270 Nm for PZ-135 KW01 PTO-shaft 400 Nm for PZ-165 KW02
No-name drum mower
Model NN-135 NN-165 NN-185 Working width 1,35 m 1,65 m 1,85 m Power demand 18kW 22 kW 55 kW Number of drums 2 2 2 Number of tines 4 6 6 R.p.m. of drums 2070/min 2070/min 2000/min Diam. of the working drums
0,68 m 0,78 m 0,90 m
R.p.m. of the tractor PTO-shaft
540/min 540/min 540/min
Capacity 1,5 ha/h 1,7 ha/h 2,5 ha/h Weight 300 kg 360 kg 450 kg Ref. no. 1201NN 1203NN 1204NN PTO-shaft 270 400 400
Extra charge Ref. no. Hydraulic for NN-165, NN-185 Powder painting for NN-135, NN-165 , NN-185 PTO-shaft 270 Nm for NN-135 KW01 PTO-shaft 400 Nm for NN-165, NN-185 KW02
Disc mower
• High efficiency • Low power demand • Uniform swatch • Durable, tough working discs with extra cups around the nuts of the blade holders ensure long
working life of the blades • Load reduction spring system causes decreasing load on the ground and better tracing of the
surface
Model KD-210 KD-250 KD-280 Ref. no. 1210 1211 1212 Mowing width (m) 2,10 2,45 2,80 Number of drums/tines (pcs.) 5 / 10 6 / 12 7 / 14 Power demand (HP) 60 80 80 Capacity (ha/h) 2 2,5 2,8 Max working speed (km/h) 15 15 15 Mowing height (cm) 3-5,5 3-5,5 3-5,5 PTO-shaft (Nm) 460 460 460
Extra charge Ref. no. PTO-shaft from mech. free-wheel
KW03
Tedding and raking machines
Rotary raking machine Z-548 Tedding and raking machine Z-222
Tedding machine Z-525 Rotary tedding and raking machine Z 275
Model Z-525 Z-222 Z-548 Z-275 Working width mm 2740 2100 3600 3000-6000 Transport width
mm 1820 2450 2050 2800
Wheels Rubber wheels/ metal wheels 400x8,0 15x6,0-6(4PR) 15x6,0-6(4PR) Power demand HP 10 20 20 11 Capacity ha/h 2,4 1,8 3,0 3,0 Weight kg 150 200 300 300 Ref. no. 1350 1351 1352 1353
Extra charge Ref. no. PTO for Z 275 PW01 PTO for Z-548 PW02
Wrapping machine
Wrapping machine with hanged bales, width of film 500 mm, Ref. No. 1501 Wrapping machine with hanged bales, width of film 500/750 mm, Ref. No. 1503
Wrapping machine with self-loading of bales, width of film 500/750 mm, hydraulic control, Ref. No. 1502
Wrapping machine with lateral self-loading of bales, width of film 500/750 mm, mechanical control, Ref. No. 1504
Model Z-552 Z-237 Z-560 Z-577
Ref. no. 1501 1502 1503 1504 Length/width/height /m/ 2,6/1,2/1,
56 3,0/1,6/2,2 2,6/1,2/1,56 4,15/2,45/
2,3 Weight /kg/ 470 950 490 950 Diameter of bale /m/ 1,2 1,2 1,2 1,2 Max. width of bale /m/ 1,3 1,3 1,3 1,2 Max. weight of bale /kg/ 1000 1000 1000 1000 Width of film /mm/ 500 500,750 500,750 500,750 Min. number of wraps double double double double Wrapping time /Min/ 2 2 2 2 Power demand (kW/HP) 28,5/38 28,5/38 28,5/38 from 35
Extra charge:
Mechanical control – Bowden cables (steel cables) 1502
Bale setting device
Round baler under Deutz-Fahr licence • Steering device Pilotbox T (electrical steering) • Illumination • Automatic chains lubrication • Wide angle joint-telescopic shaft • Rubber copying wheels • Retaining plate • String binding Twin-Fix (double binding) • Reeling wheels (1,8 m) • Tires 11.5/80-15.3 Extra charge: • Bales chute • Wide angle joint-telescopic shaft with disjunctive wedge clutch (Bandioli-Pavesi) • Mesh wrapping • Tires 15.0/55-17
Type DF 120.1,5 DF 120.1,5 D DF 120.1,8 DF 120.1,8 D Pick-up width (m) 1,5 1,5 1,85 1,85
Gathering width (m) 1,8 1,8 1,85 2,1 Number of rows of pick-up fingers 4 5 5 5 Bale diameter (m) 1,2 1,2 1,2 1,2 Bale width (m) 1,2 1,2 1,2 1,2 Number of shaped rollers (pcs) 17 17 17 17 Weight (kg) 1680 2050 2190 2250 Power demand (kW/HP) 37/50 44/60 44/60 44/60 Ref. no. 1420 1421 1422 1423
Extra charge: Wide angle joint-telescopic shaft with disjunctive wedge clutch (Bandioli-Pavesi) Mesh wrapping
Round balers
Chamber Full chamber device
Net binding device twine binding device Central lubrication
Type Z-279 Classic
Z-279/1 Classic
Z-279 Farma II
Z-279/1 Farma II
Z-569 Farma II
Z-569/1 Farma II
Z-276 Farma
Z-276/1 Farma
Pick-up width (m) 1,2 1,8 1,2 1,8 1,2 1,8 1,2 1,8 Diam. of bale (m) 1,2 1,2 1,2 1,2 1,2 1,2 1,5 1,5 Width of bale (m) 1,2 1,2 1,2 1,2 1,2 1,2 1,2 1,2 Type of chamber chain chain chain chain roller-
chain roller-chain roller roller
Lock of the chamber hydraulic hydraulic mechanical mechanical mechanical mechanical hydraulic hydraulic
Binding device twine twine twine twine twine twine twine twine Power demand (kW/HP)
40/55 40/55 40/55 40/55 50/69 50/69 40/55 40/55
PTO rotations (rotations/min)
540 540 540 540 540 540 540 540
Dimensions Length (m) 3,3 3,3 3,3 3,3 3,3 3,3 3,6 3,6 Width (m) 2,2 2,4 2,2 2,4 2,2 2,4 2,2 2,4 Height (m) 2,2 2,2 2,2 2,2 2,2 2,2 2,4 2,2 Weight(kg) 1800 1950 1800 1950 1920 2080 2040 2200 Tires 11,5x15 11,5x15 14x16 114x16 14x16 14x16 11,5x15 11,5x15 Ref. no. 1401 1402 1403 1404 1407 1408 1405 1406
Extra charge:
Net binding device Semiautomatic lubrication Electrical switch of net binder with acoustic signal of full chamber Pipe for hydraulic steering of the pick-up Acoustic signal of full chamber Tires 14x16 Divider pick-up / chamber from tractor cab Double twine binder
Power Cut round baler with cutter
Gold medal for Baler with cutter POWER CUT Z-590/1 on the International Fair POLAGRA 2003
Electronic control from tractor cab Twine binding device Net binding device Cutter
Type Z-590/1 Pick-up width (m) 2,0 Diam. of bale (m) 1,3 Width of bale (m) 1,2 Type of chamber chain Binding device Twine or net Power demand (kW/HP) 60/80 PTO rotations (rotations/min) 540 Dimensions Length (m) 3,7 Width (m) 2,56 Height (m) 2,38 Weight (kg) 2980 Tyres 14x16 Cutter 11 knives Ref. no. 1410
Extra charge:
Automatic lubrication for Z-590/1
Round baler Z-562/2 (with net wrapping implement and lubrication)
• Tires 400/6015.5 14 PR • Digital control panel with bale counter and service functions • Mechanical tailgate locks • 180 cm pickup unit • Full bale alarm • Silage inoculants applicator • Mesh wrap unit. Extra charge: • Silage inoculants applicator
Model Z-562/1 Ref. no. 1412 Capacity (pcs/h) 35 Power demand (kW) 35 Working speed(km/h)
to 10
Length/width/height (m)
3,73/2,47/2,05
Weight 2200 Extra charge:
Silage inoculants applicator
Square baler Z-511 • Big diameter of the gatherer and its tines bent in a special way, warrant that the material is gathered
without any losses • Star heaper • Gatherer with a supporting wheel • Blocks counter Extra charge: • Bales chute • Hydraulic for pick-up • Hydraulic for drawbar
Model Z-511 Weight (kg) 1330 Pick-up width (m) 1,85 Width of chamber (m) 0,46 Height of chamber (m) 0,36 Length of bale (m) 0,3-1,3 Number of piston strokes per minute 100/min Working speed (km/h) 5-10 Power demand (kW/HP) 22/30 Ref. no. 1409
Extra charge: Bales chute Hydraulic for pick-up Hydraulic for drawbar
Feed wagon T659
Feed wagons with capacities 6, 9, 11, 13 m3
serve to grind feeds and feed cattle. Practical analysis shows that thorough mixing and grinding of feed ingredients prevent feed waste, optimizes selection of feed ingredients and reduce rates of disease. Feed wagons contribute to significant increases in milk output. Cattle should have access to TMR dose 24 h /day.
Type T-659/3 T-659/1 T-659 T-659/2 Ref.no. 1601 1602 1603 1604 1605 1606 1607 1608 Conveyor belt + - + - + - + - Volumen 6 9 11 13 Length /mm/ 4500 5100 5100 5100 Width without chute /mm/ 2500 2200 2800 2500 2800 2500 2800 2500 Width with chute /mm/ Height /mm/ 2200 2550 2750 3000 Weight /kg/ 3100 3950 4050 4150
Feed chutes are placed on both sides of the truck, making it possible to release feed from both sides at the same time (as an option the feed truck can be equipped with a single feed chute on either the left or right side of the truck).
A conveyor belt is located on the front part of the truck, the feeder design reduces the total width of the feed truck (recommended for narrow building entrances).
The conveyor belt and the rear feed chutes
Feed chute located in the back of the feed truck can be used to distribute feeds for a herd not divided into groups.
The rugged stairs on both sides of the wagon ensure safe operation of the mixing process.
The modern vertical auger features 6, 8 or 10 knives depending on the wagon model. They ensure uniform grinding of feeds.
The counterknives are constructed of hardened steel and located on both sides of the truck.
An electronic scale is a necessary element of the wagon equipment. It helps to select the right portions of TMR feeds. It features ten feed programs. The large display ensures good visibility.
Weeder
• Supporting wheels • 5 rows of tines Extra charge: • Blades for pasture cultivation • Tines 8mm • Galvanized fields
Model SH-6 SH-9 SH-12
Working width (m) 6,0 9,0 12,0
Number of working fields (pcs) 4 6 8
Number of spring tines (pcs) 120 (double) 180 (double) 240 (double)
Number of supporting wheels
(pcs) 2 2 4
Length/Width/Height (m) 2x3x2,4 2x3x3,6 2x3x3,6
Weigh (kg) 530 910 1200
Capacity (ha/h) 4,0 6,0 7,5
Power demand (kW) 35 60 90
Ref. no. 8701 8703 8704
Extra charge: Blades for pasture cultivation Tines 8mm Galvanized fields Support wheel 2 pcs. Optional for all models Wheel track 1,8 m – Extra charge Gauge turning wheel – Extra charge
Forage harvester „GRASS”
Width in work position [mm] 1350
Height of flood [mm] 2300
Power demand [HP] 35
Cutting knifes quantity [pcs] 24
Length in transportation position [mm] 2400
Width in transportation position [mm] 2500
Height in transportation position [mm] 2600
Weight [kg] [kg] 650
Tires 7.00-12TL
Wheel quantity 2
Ref. no. 1360
FOKA – Single row corn chaff cutter
The machine is designed to harvest corn for green fodder. The cutter breaks up the corn to fibres of 5 mm length. The plants cut by a pair of disc cutters are being fed by the pulling shafts on a set of twelve breaking up cutters. The broken up plants are led by the stream of air to a pulled trailer. Specially ribbed bottom of the size reduction chambers facilitates crushing of the seeds and thus improves the nutritional value of the resulting green forage. The chaff staff is controlled from the tractor cabin. The chaff cutter is suspended in the three point suspension system of the tractor and the trailer hangs on the chaff cutter. Standard equipment:
• Mechanical control • Supporting wheel • Extension of the vertical channel • Power transmission shaft
Ref. no. 1361 Weight Kg 620 Length In the working/ transport mode m 2, 47/2,97 Total width of the cutting section m 2, 55/0,83 Height m 3,22 Revolutions of the power reception shaft r.p.m 540 Required minimum tractor power HP 35/45 Number of cutters pcs 12 Length of cut stalks mm 5 Working speed km/h 7÷12 Minima row spacing m 0,6 Performance t/h up to 30
Mechanical control from the tractor cabin. 2 pull rods are controlling the throwing of the green fodder. The special system in the machine causes the fulfillment of the trailer by the green fodder.
Feeders All feeders are hot galvanized, which guarantees high corrosion resistance and makes longer the period of the use of the goods. The feeders can be carried on the 3-point-linkage or on the palette fork depending on the fittings. Cattle feeders with half-opening system with slenting sides with grazing block system with opening back Calf feeders Sheep feeders Horse feeders
Apart from the feeders we have also in offer different kind of meadow gates and graying trailers.
The products from this page are produced periodical ly
You may find all kind of the feeders on our website