Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine...

13
www.picnet.org Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever down to load the paper. Rest the roll of paper on the rollers.

Transcript of Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine...

Page 1: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Graphtec CE6000-60 Vinyl Cutter

TURN IT ON

Turn the machine on using the power button located on the left side.

LOAD THE PAPER

Unlock the lever down to load the paper.

Rest the roll of paper on the rollers.

Page 2: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Make sure it is in position with the stoppers, so the roll of paper doesn’t slide.

Insert the paper.

Move the roller guides to rest on the edge of each side of the vinyl.

Page 3: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Lock the lever on the back right side of the machine, by pulling it upward.

SELECT THE MEDIA

Select # 2 – Roll – 2 Current Position.

Page 4: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

This will measure the piece of vinyl and display the exact dimensions (in inches) on the screen.

When roll of paper has loaded properly the screen should show READY.

Page 5: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Open Grapthtec Pro Studio

Load the file

Page 6: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Make sure contour marks are there.

Page 7: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Select the cutting tool.

The file is positioned on the right bottom corner of the paper.

Select the size and the number of times you want the file to be cut.

Page 8: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Making the right selection of the size will make a better use of the paper if that is what you need.

Make sure you leave enough room on the sides of the paper and in between the images.

Now you are ready to send the file to the vinyl cutter.

Page 9: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

READY TO TRANSFER

Remove your job from the vinyl cutter.

You are now ready to cut the different pieces.

Remove the excess material.

Page 10: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

PLACE DECAL ON TRANSFER TAPE

Cut a piece of transfer tape big enough to cover your decal.

Remove all bubbles.

Remove transfer tape along with decal.

Page 11: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

READY TO TRANSFER

Place on final surface, making sure there are no bubbles.

Peel off transfer tape.

Page 12: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

Your decal is ready.

Page 13: Graphtec CE6000-60 Vinyl Cutter - …...Graphtec CE6000-60 Vinyl Cutter TURN IT ON Turn the machine on using the power button located on the left side. LOAD THE PAPER Unlock the lever

www.picnet.org

You might be able to use the negative of your decal.

OTHER RESOURCES

• Installation and Setup for the Graphtec CE 6000 Cutter https://www.youtube.com/watch?v=Qt2uOU4ZKcc

• Cutting Vinyl with the Graphtec CE6000-60 and Graphtec Studio https://www.youtube.com/watch?v=eUT7RHz1gXQ

• Graphtec CE6000 Cutter Training - Cutting Master 3 https://www.youtube.com/watch?v=uiIMVqGCHGA

• Graphtec CE6000 Cutting Master 4 [Basic Operation] https://www.youtube.com/watch?v=s3TES_3o6sA

• CE6000 Series Tutorials

https://tinyurl.com/ybv6tzuq