grand-piano_02_i_e_ltr

download grand-piano_02_i_e_ltr

of 4

Transcript of grand-piano_02_i_e_ltr

  • 7/27/2019 grand-piano_02_i_e_ltr

    1/4

    Assemble the parts as shown here. Assemble the parts as shown here.

    Assemble the parts as shown here.

    Assemble the parts as shown here.

    G Making the frame.

    Attach the back sides together.

    Attach the back sides together.

    Attach the parts as shown here.

    Glue the three parts together.

    Attach the parts together.

    Glue the four parts together.

    Attach the parts together.

    Attach the parts together.

    Attach the parts together. Attach the parts

    together.

    Attach the parts together.

    Do not apply glue to

    this area yet.

    Canon Inc.http://www.canon.com/c-park/

    PAGE

    Grand piano : Assembly InstructionsHiroshi Chiba / PAPERAR

  • 7/27/2019 grand-piano_02_i_e_ltr

    2/4

    Assemble the parts as shown here.

    Assemble the parts as shown here.

    Assemble the parts as shown here.

    Attach one on each

    side.

    H Stringing the grand piano.

    Use adhesive to secure the ends of

    the strings. Thread (size 20)

    After attaching, cut off

    the leftover ends.

    Secure the other ends of the strings

    with adhesive, too.

    The first layer of strings is now complete.

    Attach the parts so that they

    hid the ends of the strings.

    Attach the second layer of

    strings in the same way, and

    attach the parts on both ends.

    A figure of completion of the frame.

    Canon Inc.http://www.canon.com/c-park/

    PAGE

    Grand piano : Assembly InstructionsHiroshi Chiba / PAPERAR

  • 7/27/2019 grand-piano_02_i_e_ltr

    3/4

    A figure of completion.

    I Making the music desk.

    Assemble the parts as shown here.

    Attach the back sides together. Attach 136 to the back side of made in 73.

    Attach the strings into the slots.

    Attach the strings.

    Apply glue on top of the strings and secure.

    Cut off the leftover string.

    Attach the back sides together.

    Attach the strings into the slots.

    Leave a gap of

    about 1mm.

    Attach the parts together.

    Assemble the parts as shown here. Attach the parts.

    Insert into 142 and assemble.

    Assemble the parts as shown here.

    Assemble the parts as shown here.

    Use the supporter at the back

    to stand up the music desk.

    Assemble the parts as shown here.

    View from back side(80).

    Canon Inc.http://www.canon.com/c-park/

    PAGE

    Grand piano : Assembly InstructionsHiroshi Chiba / PAPERAR

  • 7/27/2019 grand-piano_02_i_e_ltr

    4/4