Graco Table of Contents - Fluid Air 2007.pdf · Graco universal-length dispense pumps consist of a...

Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted

Graco Table of Contents

Pump Packages and AccessoriesAir-Operated Pump Pkgs. for Oil Dispense ........................................118-119Pourable Grease Dispense Systems ....................................................... 120Undercoating Systems ............................................................................ 121Air-Operated Grease Dispense Modules ........................................... 122-124Oil Metes and Valves ............................................................................... 125250 Series Open Reels ........................................................................... 126350 Series Enclosed Reels ..................................................................... 127350 Series Heavy-Duty Hose Reels ......................................................... 128Grease Dispense Valves, Level Guns & Accessories ................................ 129PRO Xs2, Xs3, Xs4 Air Spray Guns ........................................................ 130Pro Xs Automatic Guns ........................................................................... 131Accessories for Pro Xs Guns ........................................................... 132-134Fine Finish Products ........................................................................ 135-136HVLP Turbine Guns ................................................................................ 137Aluminum Non-ASME Pressure Cups ...................................................... 138Triton-Air Spray/HVLP Spray Packages/Technical Specifications ...... 139-140Falcon 10:1 & 20:1 Air-Assisted Spray Packages . .................................. 141Merkur-Air Assisted Spray Packages/Technical Specifications .......... 142-143Check-Mate 200-Priming Piston Fluid Pumps/Tech. Specs. .............. 144-145Check-Mate 800 CS & SST Priming Piston Fluid Pump/Tech. Specs . 146-1472:1 Standard-Air Operated Piston Transfer Pump .................................... 148Monark, President & Senator-Air Assisted Spray Packages .............. 149-150Falcon 20:1 Airless Spray Packages ....................................................... 151Linestriping Product Specifications................................................... 152-153ProBatch ................................................................................................ 154PrecisionMix II and Precision Mix II 3K-Electronic Proportioners ............. 155Proportioner Family Comparison Chart ................................................... 156

Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted118

Lubrication Products

Air-Operated Pump Packages for Oil DispensePower-Fil Dispensing Modules

222602 Fast Ball 1:1, Non-meteredModule includes: pump (222103)bung-mounted for 55-gallon (205 liter)drums and un-metered dispense kit.Dispenser includes a 0-60 psi (0-4 bar)regulator. Dispenser also fits any workbench tank having a 35” (89 cm) height.Instruction manual: 307687.

239702 Fast Ball 1:1, U.S.-meteredModule includes: pump (222103)bung-mounted for 55-gallon (205 liter)drums and metered dispense kit fordispensing a measured amount oflubricant. A separate meter recordsthe total amount of lubricant used.Dispenser includes a regulator 0-60psi (0-4 bar). Dispenser also fits anywork-bench tank having a 35” (89 cm)height. Instruction manual: 307687.

225852 Fire-Ball 5:1 UniversalModule includes: 18” (46cm) hoseand fitting kit (222062). Instructionmanual: 306520. Note use 3/8” airregulator (109075) as required (notincluded).

248230 Mini Fireball 225 3:1UniversalModule includes: pump (246775), 18”x 1/2” (46 cm) fluid hose, 18” x 3/8” airhose and fitting kit (222062) Note use3/8” air regulator (109075) as required(not included). Instruction manual:309868.

246904 Fireball 225 3:1 16 Gallon(60 liter)Module includes: pump (248097), airregulator assembly (224512), 6’ (1.8m)hose and fitting kit (222063), and drumcover (204574). Instruction manual:309868.

.Universal Supply ModuleGraco universal-length dispense pumps consist of ashort, stubby length pump with a threaded inlet, allowingthe use of a variety of inlet tubes or hoses. Universaldispense pumps can be wall-mounted for use with asuction hose kit or suction tube may be added tocreate a bung-mounted drum pump in any length.For cover-mounted pumps, add only the appropriatesuction tube. For bung-mounted, add the appropriatesuction tube and a bung adapter.

225094 Fire-Ball 5:1 16 Gallon (60 liter)Module includes: pump (203872), 6’ (1.8 m)hose and fitting kit (222063), and drum cover(204574). Instruction manual: 307-883. Orderlow level cutoff separately for metereddispense systems. Note: use 3/8”, airregulator (109075) as required (not included).

246906 Falcon 3:1 55 Gallon (205 liter)Module includes: pump (248097), airregulator assembly (224512), 6’ (1.8 m) hoseand fitting kit (222063), and drum cover(200326). Instruction manual 309868

225642 Fire-Ball 5:1 55 Gallon(205 liter)Module includes: pump (203857), 6’(1.8 m) hose and fitting kit (222063),and drum cover (200326). Instructionmanual: 307883. Order low-level cutoff(204159) separately for metered dispensesystems. Note: use 3/8” air regulator(109075) as required (not included).

225782 President 10:1 55 Gallon (205 liter)Module includes: pump (222065), 6’ (1.8 cm) hose and fittingkit (222066), and drum cover (200326). Instruction manual:307883. Order low-level cutoff (203688) separately for metereddispense systems. Note: use 3/8” air regulator(109075) as required (not included).

225853 President 10:1 UniversalFor large installations with long dispense lines, where low airpressures would otherwise limit pump performance, or for coldweather operation. This pump is similar to the Fire-Ball 5:1 butuses the President air motor and has a higher ratio. Moduleincludes air and fluid hoses, 18” (46 cm) hose and fitting kit(222068). Instruction manual: 306520. Note: use 1/2” airregulator (104266) as required (not included).

Cover-Mount ModuleTo be used with open-head drums orcontainers

119



Bung-Mount ModuleTo be used with a closed-head drum or tank with a 2” bung.

Air-Operated Pump Packages for Oil Dispense (cont’)

Portable PackagesTo be used with a 16 gallon (60 liter) drums.

246903 Fireball 3:1 16 GallonCaster base provides portability.Exposed drum provides ready productidentification (drum not included).Includes: pump (248097), cover (204574),dispense kit (237075), and caster base(203-622). Instruction manual: 309868.Use 3/8” air regulator kit (224512) asrequired (not included).

225728 Fire-Ball 5:1 Economy DispenserCaster base provides portability. Exposeddrum provides ready product identification(drum not included). Includes: pump(203872), cover (204574), dispense kit(237075), and caster base (203622). Instruc-tion manual: 307884. Use 3/8” air regulatorkit (224-512) as required (not included).

225786 President 10:1 55 Gallon (205 liter)Module includes: pump (222095), 6’ (1.8m) hose and fittingkit (222066), and 2” npt bung adapter (222308). Instructionmanual: 307883. Order low-level cutoff (203688) separatelyfor metered dispense system. Note: use 1/2” air regulator(104266) as required (not included).

246907 Fireball 3: 1 55 Gallon (200 liter)Module includes: pump (248097), 6 ft. (1.8 m) hoseand fitting kit (222063), and 2” npt bung adapter(222308). Instruction manual: 309868.

225640 Fire-Ball 5:1 55 Gallon(205 liter)Module includes: pump (204254), 6’ (1.8m)hose and fitting kit (222063), and 2” nptbung adapter (214583). Instruction manual:307883. Order low-level cutoff (204159)separately for metered dispense system.Note: use 3/8” air regulator (109075) asrequired (not included).



Pourable Grease Dispense SystemsDesigned for dispensing heavy weight gear oils and light weight pourable greases, these lubricators use the3” (7.6 cm) Fire-Ball air motor and a 15:1 ratio pump to provide high volume dispensing at moderate pressures.

222078 Fire-Ball 15:1 Pail:35 lb. (16 kg)Fire-Ball 15:1 pump and pailcover mount directly on 35 lb.(16 kg) pails. Pump providesconvenient clutch handle. Unitincludes: pump (206405), drumcover (222-058), and dispense kit(222-080). Instruction manual:307-882. Dispense valveincludes Z-swivel to provide freedom of movement withoutkinking or binding hose. Order with follower plate (220-653) asnecessary.

220170 Fire-Ball 15:1 Drum: 120 lb.(55 kg)Fire-Ball 15:1 pump and drum covermount directly onto 120 lb. (55 kg) drum.Unit includes: pump (206699), drumcover(204574), and dispense kit(222081). Instruction manual: 307882.Dispense valve includes Z-swivel toprovide freedom of movement withoutkinking or binding hose. Order withfollower plate as necessary.

220171 Fire-Ball 15:1 Drum:400 lb. (180 kg)Fire-Ball 15:1 pump and drumcover mount directly onto 400 lb.(180 kg) drum. System is station-ary-mounted and has 25’ (7.6 m)hose for servicing equipment.Unit includes: pump (206700),drum cover (200326), and dis-pense kit (222081). Instructionmanual: 307750. Dispense kitincludes Z-swivel to providefreedom of movement without kinking or bindinghose. Order with follower plate (204130) asnecessary.

Pourable Grease Dispense Kits

222080 Pourable Grease Dispense Kit: 15’ (4.6 cm)Kit 222-080 includes: grease dispense valve (223903),Z-swivel (202577), 15’ 3/8” fluid hose (109165), 3/8” closenipple (156849), quick-disconnect air nipple (169971),quick-disconnect air coupler (208536), and 3/8” air regulator(109075). Instruction manual 307882.

222081 Pourable Grease Dispense Kit: 25’ (7.6 cm)Kit 222081 is the same as 222080 but with 25’ (7.6 m) 3/8” fluidhose (206409).

Kits can be used interchangeably on any length Fire-Ball15:1 pump.

121



Undercoating SystemsAll Graco undercoater systems use the industry standard Fire-Ball 15:1 pump. Designed and packed specifically towithstand the rigors and corrosiveness of undercoating compounds, they will deliver many years of trouble-freeservice. All systems are complete and include a spray tip of your choice. All units include Graco’s heavy-dutyRAC tips for instant clearing of clogged spray tips.

Undercoating Accessories

214570 FilterFilter has 60 mesh screen for use with unfilledmaterials or those with fine filter material.

202577 Z-SwivelZ-configuration allows greater freedom ofmovement for access to difficult-to-reachspots. Optional for all Fire-Ball undercoaters.

206408 Inline Spray Valve-No Tip

234237 Silver Airless Spray Gun5000 PSI; 4 finger trigger; hand tite tipguard; 517 RAC V SwitchTip

Undercoating Dispense Kits

222079 Undercoating Dispense Kit: 15’ (4.6 m)222082 Undercoating Dispense Kit: 25’ (7.6 m)Use for dispensing undercoating material with Fire-Ball 15:1pumps. Kits can be used interchangeably on any lengthFire-Ball 15:1 pump.

222079 kit includes: undercoating gun (234237), gun swivel(239663), spray tip of choice, spray tip retainer (222674), 15’ x 3/8” fluid hose (109-165), quick disconnect air nipple (169971),quick-disconnect air coupler (208536), 3/8” air regulator(110234), ball valve (210657), pipe tee (104984), pipe nipple(156971), street elbow (100840), pipe nipple (156849) and(100960) air gauge.

HD RAC Ordering Information

223335 HD-RAC Housing/Guard AssemblyOrifice Size (inches)

.015 .017 .019 .021 .023 .025 .027

6 315 317 319 321 323 325 327

8 415 417 419 421 423 425 427

10 515 517 519 521 523 525 527

12 615 617 619 621 623 625 627

Fan

Wid

th (I

nche

s)

Tip identification: all spray tips for HD RAC must be ordered using six characters. The first threecharacters are always GHD. The next three digits are numbers as shown in the selection chart ofavailable sizes. For example, the correct order number for a tip with a .021 orifice and a 10” patternwidth is GHD-521. Fan width is spray pattern width as measure 12” from the spray tip orifice.

226342 Fire-Ball 15:1 Roll-Around:120 lb. (55 kg) DrumPump and cover mount to standard 120lb. (55 kg) drum. Caster base providesroll-around portability. System includes:pump (206699), drum cover (204574), casterbase (204144), and undercoating dispensekit (222079). Instruction manual: 307879/307531. Undercoating dispense kitincludes spray tip of your choice.Specify tip size at time of order.

Fire-Ball 15:1 pump and cover mountto standard 400 lb. (180 kg) drum.Unit is stationary-mounted andincludes 25’ fluid hose for wide service reach. Systemincludes: pump (206700), drum cover (200326), andundercoating dispense kit (222082). Instruction manual:307879/30753. Undercoating dispense kit includes HDRAC nozzle and spray tip of your choice. Specify tip sizeat time of order.

206496 39” (99 cm) Nozzle Extension

Steel tube with conical tip reaches deep intoblind areas and delivers 360o coating fan. Use forunfilled wax and graphite products.

226269 Fire-Ball 15:1 Stationary:400 lb. (180 kg) Drum



Air-Operated Grease Dispense ModulesPortable DispenserThese systems fit directly on a 35-70 lb.(16-32 kg) drum.

244-099 Falcon 50:1 with Band CasterBaseSame as 244097 with the addition ofband caster base (204144). Instructionmanual: 308300

246913 Falcon 50:1 with CartTwo-wheel tilt-back cart; Cover (204574);Dispense Kit (236058);Instruction manual: 306345

225773 Fire-Ball 50:1 with CartSame as 225827 with the addition of atwo-wheel tilt-back cart (203650). Instruction manual: 307878.

Cart-Mounted TopperFor use with 35 lb. (16 kg) pails.

226012 Fire-Ball 50:1System includes: pump (239877), 6’(1.8 m) dispense kit (222070), cart(203650), elevator (203664), andinductor (204351). Instructionmanual: 307878. Note: use3/8” air regulator (109075) asrequired (not included).

Portable Pail DispenserThese basic systems fit directly on a 35lb. (16 kg) pail.

246910 Mini-Fireball 50:135 lb. Portable Pail Dispenser. Moduleincludes: pump (246909) with handle,follower plate (220653) for use onoriginal pail, dispense kit (236058), andcover (222059). Instruction manual:306345. Dispense kits includes: 12’ (3.7m) hose, Z-swivel and grease dispensevalve. Pail cover includes valve holster.Use 3/8” air regulator as required (not included).

222-069 Fire-Ball 50:1Module includes: pump with handle(239877) follower plate (220653) foruse on original pail, dispense kit(220070), and cover (222059).Instruction manual: 307878.Dispense kit includes 6’ (1.8 m)hose, Z-swivel and grease dispensevalve. Use 3/8” air regulator(109075) as required (not included).

Stationary Pail DispensersThese self-contained dispensers include a 70 lb. (10 gallon)metal pail. They can also be used with a similar 35 lb. (5 gal.)pail (including plastic) if used inside the supplied pail.

246911 Falcon 50:1Dispenser includes: pump (246909), pail(204134) 12’ (3.7 m) hose dispense kit(236058), and drum cover (204574).Dispense kit includes: hose, Z-swiveland grease dispense valve. Instructionmanual: 306345.

225827 Fire-Ball 50:1Dispenser includes: pump (239877),pail (204134), holster (203976),dispense kit (222070), and drumcover (204574). Dispense kitincludes: 6’ (1.8 m) hose, Z-swiveland grease dispense valve.Instruction manual: 307878. Use 3/8” air regulator as required (notincluded). Note: follower plate notincluded. Order follower plate (220654) for 70 lb. (32 kg) pail orfollower plate (220653) for 35 lb. (16 kg) pail.

123



Air-Operated Grease Dispense Modules (cont’)

222073 Fire-Ball 50:1The Fire-Ball 50:1 topper inductor systemis capable of supplying lubricants to afour-point simultaneous dispense system.System includes: pump (239887), elevator(204121), and assembly support (222074).Instruction manual: 308883. Supportassembly includes: dust cover, base,inductor plate, 6’ (1.8 m) air hose and 6’(1.8 m) fluid hose. Use 3/8” air regulator(109075) as required (not included).

Portable PackagesLarge container sizes with portable bases make these pumppackages easy for workers to use. The equipment can berolled out to the work area when needed and rolled backwhen not in use. Graco offers a wide variety of carts toaccommodate the many different environments that thelubrication equipment is used in: caster base, two-wheeltilt-back cart and heavy-duty cart.

Caster BaseThe caster base of these four systems provide maximumportability. The pump and cover mount directly onto a 120 lb.(55 kg) drum. The exposed drum provides ready productidentification.

246917 Mini-Fire-Ball 50:1System includes: pump (246781), drumcover (200326), follower plate (223845),CE kit (240979)

225006 Fire-Ball 50:1System includes: pump (239887), drumcover (204574), follower plate (220654),6’ (1.8 m) hose dispense kit (222070).Hose dispense kit includes: hose, Z-swivel and dispense valve, holster(203976), and caster base(203622). Instruction manual: 306345.Use 3/8” air regulator (109075) asrequired (not included).

Stationary Supply ModulesDrum cover-mounted grease pumps offer a convenient methodof supplying lubricants from 120 lb. (55 kg) drums to a greasedispense system.

246914 Mini-Fire Ball 50:1Module includes: pump (246780), drumcover (204574), follower plate (220654),Instruction manual: 306345.

225014 Fire-Ball 50:1Module includes: pump (239887), drum cover(204574), follower plate (220654), and 6’ (1.8 m)hose and fitting dispense kit (222072).Instruction manual: 306345 Use3/8” air regulator (109075) as required (notincluded).

223108 Fire-Ball 50:1Module includes: pump (205394), cover (204-574), follower plate (223344), and 6’ (1.8 m) hose and fitting kit(222076). Instruction manual: 307-880. Use 1/2” air regulator(104266) as required (not included). Product appearance similarto 225014 but with a President 50:1 pump instead of a Fire-Ball50:1.

Stationary Topper Inductor SystemTopper inductor systems for 120 lb. (55 kg) drums have aninductor plate that serves as a seal to prevent entry of foreignmaterial. The heavier weight of the plate produces enoughpressure for thorough grease evacuation. An elevatorassembly allows for easy drum changeovers that can beaccomplished by one person.



Air-Operated Grease Dispense Modules (cont’)

Two-Wheel Tilt-Back CartTwo-wheel tilt-back carts provide flexibility for moving thepumps over uneven surfaces. They are also helpful whenworking around small steps.

246916 Mini-Fire-Ball 50:1System includes: pump (246780), drumcover (204574), follower plate (220654), 12’(3.6 m) hose dispense kit (236058), andtwo-wheel cart (203650). Instructionmanual: 306345. Hose dispense kitincludes: hoseZ-swivel, dispense valve and holster.

225026 Fire-Ball 50:1System includes: pump (239887), drumcover (204574), follower plate(220654), 6’ (1.8 m) hose dispense kit(222-070), and two-wheel cart(203650). Instruction manual:306345. This system can be orderedwith an accessory cabinet (220-189).Use 3/8” air regulator (109075) asrequired (not included). Hosedispense kit includes: hose,Z-swivel and dispense valve.

Heavy-Duty CartThese heavy-duty carts make it easy to maneuver the pumpsin outdoor situations. They are well-used in railroad yards,construction sites and mining facilities. Heavy-dutytruck-mounted grease pump offer a convenient methodof dispensing lubricants from 120 lb. (55 kg) drums.

222-245 Fire-Ball 50:1System includes: pump (239887),drum cover (222060), follower plate(220654), 25’ (7.6 m) hose dispensekit (222383), holster (203976), andheavy-dutytwo-wheel cart (222-243) and hold-down kit (222061) for use onunpaved terrain. Instructionmanual: 306345. Hose dispense kitincludes: hose, Z-swivel anddispense valve. Note: drum not included.

125



Oil Meters and ValvesIt’s Simple. Overfill and you overspend. The natural tendency for well-meaning technicians is to add a little extra toeach oil change. Especially when their present oil meter is worn and less then accurate.That’s where Graco can help. Our meters eliminate costly rework. All valves and metershave 1/2” inlet.

Bare Dispense Valves

238647 AutomotiveInstruction manual 307-995.

Un-Metered AutomotiveDispense Valves

222411 For OilValve includes: dispense valve(222-648) and non-drip nozzle(203-265). Instruction manual307-995.

222412 For Gear LubeValve includes: dispense valve(222-648) and non-drip nozzle(201-701). Instruction manual307-995.

222413 For ATFValve includes: dispense valve(222-648) and non-drip nozzle(203-687, includes hose).Instruction manual 307-995.

EM5 Dispense Valves

Instruction Manual 308-487.

EM5 Electronic Meter, RigidExtension238461 U.S. Measure*238457 Metric Measure

EM5 Electronic Meter, FlexibleExtension238462 U.S. Measure238465 Metric Measure*238458 Metric Measure

EM5 Electronic Meter, Gear LubeExtension(15o Bend with 90o Elbow)238463 U.S. Measure238466 Metric Measure238456/238887 Metric Measure

Swivel Cover191287 Red191288 Blue191289 Green191290 Yellow191286 Black

High-Flo Electronic Meter: U.S.MeasureInstruction manual 308113.

238-640 With Cap and Chain

High-Flo Electronic Meter:Metric Measure238640 With Non-drip Nozzle238642 With Cap and Chain

*Canadian weights and measures approved.Available in Canada only.



250 Series Open ReelsGraco’s 250 series reels use the Quiet Latch design plus heavier construction throughoutto provide a heavy-duty reel to withstand the rigors of high usage, severe dutyinstallations. This series reel has a capacity for 3/8” x 40 ft. (12.2 m) air/water hose,1/2 x 25’ (7.6 m) oil dispense hose, and 1/4” x 35’ (10.7 m) high pressure grease hose.

Open Dispense Reels-Oil

Part # Consists of: DescriptionReel Dispense No. of

Part No. with Hose + Valve Hose Cartons

Motor Oil223147 218445 + 238451 1/2” x 25’ (7.6 m) 2

ATF223149 218445 + 238452 1/2” x 25’ (7.6 m) 2

Gear Lube

223151 218445 + 238453 1/2“ x 25’ (7.6 m) 2218453 218445 + 222412* 1/2” x 25’ (7.6 m) 2

Oil

240963 218445 None 1/2” x 25’ (7.6 m) 1

*Bare valves with 90o gear lube extension.

Open Dispense Reels-Grease

Part # Consists of: All Part #s IncludeReel Valve No. of

Part No. with Hose + No. Hose Cartons

Grease

218443* 218441 + 223903 1/4” x 35’ (10.6 m) 3

240967 218441 None 1/4” x 35’ (10.6 m) 1

*Includes 1/4” Z-swivel (202-577).

Open Dispense Reels-Air/Water/Anti-Freeze/Wash Solvent

Part # Consists of: All Parts #s IncludeReel Valve No. of

Part No. with Hose + No. Hose CartonsAir224846 224885 + 218544 1/4” x 40’ (12.2 m) 2224847 224886 + 218545 3/8” x 40’ (12.2 m) 2

Water/Anti-Freeze224930 224885 + 180685 1/4” x 40’ (12.2 m) 2224931 224886 + 180685 3/8” x 40’ (12.2 m) 2

Air/Water/Anti-Freeze/Wash Solvent240958 224885 None 1/4” x 40’ (12.2 m) 1240959 224886 None 3/8” x 40’ (12.2 m) 1

Above hose reels include SST shaft and bronze swivel for use withcorrosive fluids.

Oil Grease Air/Water/Anti-Freeze/Wash SolventDescription

240963 240967 240959

Bare Hose Reel 218345 218344 224880Bare Reel Pressure Rating 1800 psi 8000 psi 1800 psi

(124 bar) (550 bar) (124 bar)Dispense Hose 220608 218493 218497Dispense Hose Size 1/2”x25’ (7.6 m) 1/4”x35’ (10.6 m) 3/8”x40’ (12.2 m)Dispense Outlet Connection1/2 npt(m) 1/4 npt(m) 3/8 npt(m)Inlet Hose 110069 159796 110069Inlet Hose Size 1/2”x15” (0.4 m) 1/4”x15” (4.9 m) 1/2”x15” (0.4 m)Inlet Connection 1/2 npt(m) 1/4 npt(m) 1/2 npt(m)Reel Pressure Rating 1800 psi 5000 psi 180 psi (with hose) (124 bar) (345 bar) (12 bar)Ball Stop 218-341 218-340 218-341Weight in lbs. (kg) 40.0 (17.9) 61.8 (27.7) 39.0 (17.5)Instruction Manual 307694 307694 307694

Specifications for 250 Series Open and Enclosed Reels

127



250 Series Enclosed ReelsThis enclosed series provides the same heavy-duty reel construction as the open 250series plus an attractive enclosure for maximum appearance. Enclosures are designed forease of installation and removal for service or inspection. Enclosed reels can be usedsingly or in a bank. End panels are also available to complete single or multiple reelbanks. Reels in this column include enclosure as shown. Complete reel bank alsorequires end panels and reel mounting channel.

Enclosed Dispense Reels-Oils

Part # Consists of: DescriptionReel Dispense No. of

Part No. with Hose + Valve + Enclosure Hose Cartons

Motor Oil

223-131 218445 + 238451 + 218546 1/2”x25’ (7.6 m) 3

ATF

223-133 218445 + 238452 + 218546 1/2”x25’ (7.6 m) 3

Gear Lube

223-135 218445 + 238453 + 218546 1/2”x25’ (7.6 m) 3218-437 218445 + 222412* + 218546 1/2”x25’ (7.6 m) 3

Oil200 Series Reel

220-483 218445 None 218546 1/2”x25’ (7.6 m) 2

*Bare valves with 90o gear lube extension.

Enclosed Dispense Reels-Air/Water/Wash Solvent

Part # Consists of: All Part #s IncludeReel Valve No. of

Part No. with Hose + No. + Enclosure Hose Cartons

Air227-842* 226975 + 218545 + 218546 3/8”x25’ (7.6 m)3224-841** 224886 + 218545 + 218546 3/8”x40’ (12.2 m) 3

Water/Anti-Freeze

224-844** 224886 + 180685 + 218546 3/8”x40’ (12.2 m) 3

Air/Water/Anti-Freeze/Wash Solvent

224-838** 224886 + None + 218546 3/8”x40’ (12.2 m) 2

*Uses 100 series reel.**Above hose reels include SSTshaft and bronze swivel for use withcorrosive fluid.



350 Series Heavy-Duty Hose ReelsCompact in design, the 350 series hose reel enhances productivity andefficiency in the shop. The ratchet latch allows users to work productivelywithout excessive hose getting in the way. The heavy-duty spring, bearingsand ratchet latch ensure many years of reliable service.

Air & Water Reels238213 3/8” x 60’

Medium Pressure Hose Reel237020 Bare Reel237022 with 1/2” x 50’ (15.25 m) hose

High Pressure Hose Reel237-030Bare Reel

For 5000 PSI (350 bar)237-032with 1/4” x 50’ (15.25 m) hose

For 4000 PSI (280 bar)237-034 with 3/8” x 50’ (15.25 m) hose

Specifications for 350 Series Open Reels(without Hose)

Medium HighDescription Pressure Hose Pressure Hose

Inlet 1/2 npt (f) 1/2 npt (f)Outlet 1/2 npsm (f) 3/8 npsm (f)Max. Pressure 1800 psi (126 bar) 8000 psi (550 bar)Operating Temp. -40-200oF (-40-93oC) -40-200oF (-40-93oC)Bearings Brass BrassWetted Parts CS, nitrile rubber, brass CS, leather, brassInstruction Manual 308400 30-400

Note: Inlet kits are not included. Order 219-096 or 219-097 separately.

Accessories for350 Series Reel

241792 2 Reel Mounting Channel - Open Reels241793 3 Reel Mounting Channel - Open ReelsSame as enclosed channels but includes reel mounting plate.Additional open reels can be mounted up to 6 positionchannel.

219096 Hose Inlet Kit for Medium Pressure Reels21-097 Hose Inlet Kit for High Pressure ReelIncludes nipple, union and hose, 219-097 also includesbushing.

242056 High Pressure Dispense Valve: 1/4 npt fluid inlet242058 High Pressure Dispense Valve: 3/8 npt fluid inletMaximum working pressure: 8000 psi (550 bar)

202577 Z-Swivel: 1/4 npt (m) x 1/4 npt (f)224569 Z-Swivel: 3/8 npt (m) x 3/8 npt (f)Maximum working pressure: 6500 psi (450 bar)

180685 Water BibbMaximum working pressure: 100 psi (7 bar)

129



Grease Dispense Valves, Lever Guns & AccessoriesGrease Dispense Valve

242056 Grease Dispense Valve: 1/4 npt(f) inlet242058 Grease Dispense Valve: 3/8 npt(f) inletHigh pressure valve with knurled grip bodyfor operator comfort. Workingpressure: 8000 psi (560 bar).Includes nozzle (200-389). Orderswivel below.

224872 Fast Lube Grease Dispense Valve 5000 psi (333 bar)

High pressure chassis grease valve with knurled grip foroperator comfort. Includes hose (109-148), Z-Swivel (202-577)and grease valve (223-903).

202577Z-Swivel: 1/4 npt(m) x 1/4 npt(f)224-569Z-Swivel: 3/8 npt(m) x 3/8 npt(f)Use 202-577 with 223-903 greasedispense valveUse 224-569 with 224-132 greasedispense valve

202600 Power-Shot BoosterGunFor use with any high-pressurelubricator or a booster/dispensevalve with hose reels. Has moldedrubber trip handle.

Boosts pressure of incoming greaseto 18,000 psi (1260 bar). Maximuminlet pressure: 5000 psi (333 bar).Inlet and outlet: 1/8 npt(f)

Not for use with flexible hosenozzle. Include nozzle (200-389).Order hose swivel (202-579)separately.

203697 Hot-Shot Booster GunFor portable operation withoutcontinuous connection to grease supply. Has 4 oz. (113 grams)self-contained grease reservoir in handle capable of servicingup to 100 fittings before recharge. Has grease fitting forrecharge from manual-or air-powered lube. Single-handoperation squeeze handle develops up to 10,000 psi (666 bar).Includes grease nozzle (200-325).

Lever and Pistol Guns

110218 Standard Lever ActionGrease GunDevelops up to 6000 psi (400 bar) workingpressure. Two-way loading cartridge and bulkfill. Optional loader fitting available. Equippedwith rigid extension and hydraulic coupler.

110216 Heavy-Duty Lever Action Grease GunHigh pressure variable -- low volume. Three-way loading: bulk fill, loader fitting andcartridge. Air bleeder valve and vinyl griphandle included. Equipped with rigid extensionand hydraulic coupler.

110203 Pistol-Matic Grease GunDevelops up to 6000 psi (400 bar) workingpressure. Three-way loading: bulk fill, loaderfitting and cartridge. Air-bleeder valve andvinyl grip handle included. Equipped withrigid extension and hydraulic coupler.

110202 Pistol-Matic Grease GunSame as 110-203 except includes 12” (30.4 cm) rubber flex hoseand hydraulic coupler.

110201 Suction GunDesigned for evacuating and fillingfluids into gear housing, differentials,transmissions and a variety of applica-tions. Equipped with 12” (30.4 cm) clearplastic hose.

112196 Air Operated Grease GunPistol-type, single shot. Three-wayloading: bulk fill, loader fitting and 14oz. (400 g) cartridge. Air input range:75-100 psi (5-7 bar). Spring-primed,standard gun coupler, bleeder valve.Working pressure: 6000 psi (420 bar).

110201 Suction GunFor filling and evacuating gear housings,differentials, transmissions, etc. Equipped with12” (30 cm) clear plastic hose.



PRO Xs2, Xs3 and PRO Xs4 Air Spray Guns

PRO Xs Manual Gun Technical SpecificationsProXs2 ProXs3 ProXs4 ProXs4 AA

Max. Working 100 PSI 100 PSI 100 PSI 3000 PSIFluid Pressure (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (207 bar, 20.7 MPa)

Max. Working 100 PSI 100 PSI 100 PSI 1000 PSIFluid Pressure (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa)

Gun Weight 23.5 oz (6667.6g) 25.1 oz (711.6g) 27.8 oz (788.1g) 29.1 oz (825g)

Gun Length 8.6 in (21.8 cm) 9.7 in (24.6 cm) 11.1 in. (28.2 cm) 11.4 in. (29.0 cm)

Recommended Paint 7 to 150 7 to - 25 to - 7 to -resistivity range Megohm-cm Megohm-cm Megohm-cm Megohm-cm

Max. voltage output Power Point design 60 Kilovolts 85 kilovolts 85 kilovolts

Max. fluid 120oF 120oF 120oF 120oFworking temp. (48.8oC) (48.8oC) (48.8oC) (48.8oC)

Air Inlet 1/4 npsm (l.h.) 1/4 npsm (l.h.) 1/4 npsm (l.h.) 1/4 npsm (l.h.)

Fluid Inlet 3/8-18 npsm 3/8-18 npsm 3/8-18 npsm 1/4-18 npsm(R 3/8-19) (R 3/8-19) (R 3/8-19)compound thread compound thread compound thread

Wetted Parts polyethylene, SST, polyethylene, SST, polyethylene, SST, SST, nylon, PEEK,nylon, acetal, nylon, acetal, nylon, acetal, UHMWPE, carbideTeflon, UHMWPE Teflon, UHMWPE Teflon, UHMWPE acetalfluoroelastomer, fluoroelastomer, fluoroelastomer,PEEK PEEK PEEK

Noise data*Sound pressure 87.0 dBA 87.0 dBA 87.0 dBA 95.0 dBASound power 90.4 dBA 90.4 dBA 90.4 dBA 99.7 dBA

Instruction Manual 309294 309294/309293 309294 309296

* All reading were taken at 40 PSI (2.8 bar, 0.3 MPa). Sound pressure was tested at CAGI-PNUEROP-1969 and sound power to ISO 3744-1981UHMWPE - Ultra-High Molecular Weight Polyethylene

131



PRO Xs Automatic GunsPro Auto Xs Pro Auto Xs AA

Max. working 100 PSI 3000 PSIfluid pressure (7 bar, 0.7 MPa) (207 bar, 20.7 MPa)

Max. working 100 PSI 100 PSIair pressure (7 bar, 0.7MPa) (7 bar, 0.7 MPa)

Gun weight 3.52 lb 3.52 lb.(1.60 kg) (1.60 kg)

Gun length 12.25 in. 12.25 in.(31.1 cm) (31.1 cm)

Voltage output 85 kilovolts 85 kilovolts

Air Inlet (fittings are included with gunAtomizing air 5/32 in. OD nylon tube 5/32 in. OD nylon tubeFan air 5/32 in. OD nylon tube N/ACylinder pilot 1/4 in. OD nylon tube 1/4 in. OD nylon tubeHi-lo voltage selection 1/4 in. OD nylon tube 1/4 in. OD nylon tubeTurbine air 1/4 npsm (l.h.) 1/4 npsm (l.h)

Fluid Inlet 1/4-18.6 npsm (m) 1/4-18 npsm

Wetted parts SST, nylon, PEEK SST, nylon, PEEKUHMWPE, acetal IHMWPE, carbide, acetal

Instruction Manual 309297 309298

Ordering Information

244399 PRO Xs2 - Gun includes 1.5 mm nozzle,197477 air cap. Grounded air hose must beordered separately.

244440 PRO Xs3 for Standard Coatrings - Gun includes1.5 mm nozzle and 197477 air carp. Grounded air hosemust be ordered separately.

244579 PRO Xs3 Smart Gun for StandardCoatings - Includes Smart Display showingvoltage and current at the gun, adjustablevoltage, 1.5 mm nozzle and 197477 air cap.Grounded air hose must ordered separately.

244575 PRO Xs3 High Conductivity Coatings- Gun includes 1.5mm nozzle and 197477 air cap.Grounded air hose must be ordered separately.

244576 PRO Xs3 Smart Gun for HighConductivity Coatings - Includes Smart Display showingvoltage and current at the gun, adjustable voltage, 1.5 mmnozzle and 197477 air cap. Grounded air hose must be orderedseparately.

244581 PRO Xs3 for Waterborne Coatings - Gun includes1.5 mm nozzle and 197477 air cap, Waterborne fluid hose mustbe ordered separately (includes fluid tube and gun fittings).Grounded air hose must ordered separately.

244582 PRO Xs3 Smart Gun for WaterborneCoatings - Includes Smart Display showingvoltage and current at the gun, adjustablevoltage, 1.5 mm nozzle and 197477 air cap.Waterborne fluid hose must be ordered separately (includesfluid tube and gun fittings). Grounded airhose must be ordered separately.

244401 PRO Xs4, Standard - Gun includes1.5 mm nozzle and 197477 air cap. Groundedair hose must be ordered separately.

244580 PRO Xs4, Smart - Includes SmartDisplay showing voltage and current at the gun, adjustablevoltage, 1.5 mm nozzle and 197477 air carp. Grounded air hosemust be ordered separately.

244572 PRO Xs4, Air-Assisted, Standard -Includes tip of choice when ordering.Grounded air hose must be ordered sepa-rately.

244573 PRO Xs4, Air Assisted, Smart -Includes tip of choice when ordering.Grounded air hose must be ordered sepa-rately.

244589 PRO Auto Xs for StandardCoatings - Includes gun shroud, mount-ing bracket, gun manifold and gun with1.5 mm fluid nozzle and 197477 air cap.Grounded air hose must be orderedseparately.

244590 PRO Auto Xs for High Conductivity Coatings -Includes gun shroud, mounting bracket, gun manifold and gunwith 1.5 mm fluid nozzle and 197477 air cap. Grounded air hosemust be ordered separately.

244591 PRO Auto Xs for Waterborne Coatings - Includesgun shroud, mounting bracket, gunmanifold and gun with 1.5mm fluid nozzleand 197477 air cap. Waterborne fluid hosemust be ordered separately (includes fluidtube and gun fittings). Grounded air hosemust be ordered separately.

244592 PRO Auto Xs AA - Includes gun,shroud, mounting brackets, gun manifoldand gun with tip of choice. Grounded airhose must be order separately.



Accessories for PRO Xs GunsGrounded Air Hoses (required for use)Length Air Flex Standard Waterborne6 ft. (1.8 m) 244963 223068 23506815 ft. (4.5 m) 244964 223069 23506925 ft. (7.6 m) 244965 223070 23507036 ft. (11 m) 244966 223071 23507150 ft. (15 m) 244967 223072 23507275 ft. (23 m) 244968 223073 235073100 ft. (30.5 m) 244969 223074 235074

Air FlexEPDM rubber core and cover for extra flexibility

StandardModified semi-conductive polyamide core, urethane cover for addeddurability.

*Waterborne (required for Waterborne application)Conductive SST wire braid for grounding. Polyurethane tube andcover.

185493 Air Hose Adapter Nipple - Allows for the connection ofmultiple air hoses as needed for a special grounded PRO air hoses. 1/4npsm (L.H.) x 1/4 npsm.

112534 Air Quick Disconnect/Swivel - Swiveling air quickdisconnect designed to replace the standard air swivel fitting in the gunhandle.

244914 Gun Covers (box of 10) - For PRO Xs2 gun

239945 Gun Covers (box 0f 10) - For PRO Auto Xs guns

Select Comfort GripsTM

Snap-on grips to increase the handle size to reduce operator fatigue245263 Medium Grip Kit245264 Large Grip Kit

223688 Turbine Alternator Bearing Repair Kit

105749 Cleaning Brush

Air Spray PRO Xs GunsFluid Nozzles

Part No. Size197263 0.75 mm (0.030 in)197264 1.0 mm (0.042 in.)197265 1.2 mm (0.047 in.)197266 1.5 mm (0.055 in.)197267 1.8 mm (0.070 in.)197268 2.0 mm (0.080 in.)

Air CapsPart No. Type Pattern Width197477 Round End 15-17 in. (381-431.8 mm)197478 Low Flow 14-16 in. (355.6-406.4 mm)197479 Tapered End 17.5-19.5 in. (444.5-495.3 mm)197480 Large Pattern 16-18 in (406.4-457.2 mm)197481 With 2.0 nozzle only 16-18 in. (406.4-457.2 mm)

Round Pattern KitsConsists of fluid tip, diffuser and air cap245217 4-6 in. (102-152 mm) diameter245219 8-10 in. (203-254 mm) diameter

Fluid Hose215637 1/4 in. ID x 25 ft. (7.6 m)215638 1/4 in. ID x 50 ft. (15.2 m)

244912 Push/Pull Valve - For quick change of fan size

235300 Gun Mounting Bracket - Allows gun to hang withbarrel in a downward orientation to prevent material fromgetting in the other air passages.

244911 Fluid Seal Repair Kit

244916 Four Finger Trigger Kit - Allows the conversion ofPRO Xs3 and PRO Xs4 guns to be used with a four-finger rigger

244919 High Conductivity Kit - Allows standard coating PROXs3 guns to effectively spray high conductivity coatings.

244781 Air Seal Repair Kit (manual guns)

245270 Gun Washer Kit - Used to convert Graco gun washersso they can clean PRO Xs air spray guns.

245252 Waterborne Fluid Hose - 25 ft. (7.6 m) fluid hose.Used only with PRO Xs3 waterborne guns

245301 Waterborne PRO Xs3 Gun Kit - PRO Xs3 gun with 25ft. (7.6 m) waterborne fluid hose

245305 Waterborne PRO Xs3 Gun Kit - PRO Xs3 Smart Gunwith 25 ft. (7.6 m) waterborne fluid hose

244731 1 Quart (0.95 l) Remote Pressure Cup - Includes airregulators for both gun atomization and supply air to thepressure cup

244732 2 Quart (1.90 l) Remote Pressure Cup - Includes airregulators for both gun atomization and supply air to thepressure cup

198405 Gun Flush Box - Used to convert existing gun flushboxes to hold PRO Xs3 and Xs4 models guns.

133



Accessories for PRO Xs Guns (cont’)Tip Selection Chart for PRO Xs4 AA and PRO Auto Xs AA SprayGuns

Fan Width atOrifice Size 10 in (250 mm)in. (mm) in. (mm) Part No.

0.007 (0.178) 2-4 (50-100) GG31074-6 (100-150) GG32076-8 (150-200) GG3307

0.009 (0.229) 4-6 (100-150) GG32096-8 (150-200) GG33098-10 (200-250) GG3409

0.011 (0.279) 4-6 (100-150) GG32116-8 (150-200) GG33118-10 (200-250) GG341110-12 (250-300) GG351112-14 (300-350 GG3611

0.013 (0.330) 4-6 (100-150) GG32136-8 (150-200) GG33138-10 (200-250) GG341310-12 (250-300) GG351312-14 (300-350) GG3613

0.015 (0.381) 4-6 (100-150) GG32156-8 (150-200) GG33158-10 (200-250) GG341510-12 (250-300) GG351512-14 (300-350) GG3615

0.017 (0.432) 4-6 (100-150) GG32176-8 (150-200) GG33178-10 (200-250) GG341710-12 (250-300) GG351712-14 (300-350) GG3617

0.019 (0.483) 6-8 (150-200) GG33198-10 (200-250) GG341910-12 (250-300) GG351912-14 (300-350) GG361914-16 (350-400) GG3719

0.021 (0.533) 8-10 (200-250) GG342110-12 (250-300) GG352112-14 (300-350) GG362114-16 (350-400) GG372116-18 (400-450 GG3821

0.023 (0.584) 8-10 (200-250) GG342310-12 (250-300) GG352312-14 (300-350) GG362314-16 (350-400) GG372316-18 (400-250) GG3823

0.025 (0.635 8-10 (200-250) GG342510-12 (250-300) GG352512-14 (300-350) GG362514-16 (350-400) GG372516-18 (400-450) GG3825

Air-Assisted PRO Xs Guns

245-282 PRO Xs4 AA Round Spray Kit (manual gun) - Roundspray provides a higher level of performance to electrostaticspraying. Includes tip of choice.

245298 PRO Xs AA Round Spray Kit - Round spray providesa higher level of performance to electrostatic spraying. In-cludes tip of choice.

Part No. Pattern Flow RateWidth at 600 PSI (41 bar, 4.1 MPa)

236836 9 in. 4.1 oz./min.236837 10 in. 5.1 oz./min.236838 10 in. 5.4 oz./min.236839 14 in. 7.8 oz./min.236840 13 in. 9.1 oz./min.236841 12 in. 11.8 oz./min.236842 11 in. 16.2 oz./min.

244917 Electrode Replacement Kit - Includes 5 electrodes

115898 Fluid Swivel

238563 In-Line Fluid Filter, 60 mesh (3 pack) - To replace the100 mesh filter that is included with the gun.

244834 Integral Air Swivel with Left-Handed Threads

Air WhiphoseGrounded Air Hose for extra flexibility

236134 Length: 3 ft. (0.9m)236135 Length: 6 ft. (1.8m)

Fluid Hose223540 1/4 in. ID x 25 ft. (7.6 m)223541 1/4 in. ID x 50 ft. (15.2 m)

244913 E/S Always on Kit - Replaces inlet fitting with ballvalve to shut air off during flushing. Converts ES on./off leverto always ON condition

244781 Air Seal Repair Kit (manual guns)

245271 Gun Washer Kit - Used to convert Graco gun washersto clean PRO Xs air-assisted guns.

198405 Gun Flush Box - Used to convert existing gun flushboxes to hold PRO Xs3 and Xs4 models guns.



Accessories for PRO Xs Guns (cont’)Automatic Xs Gun

224117 E/S Display Module - Receives fiber optic transmis-sion from the PRO Auto Xs gun and displays the gun’s outputvoltage and current. Mounts in a standard 19 in. DIN rack.Refer to instruction manual 308265

Fiber Optic Cable Assembly

For connection between gun manifold and display module orbetween bulkhead connector and display module. Use onlywith 224117 display. See Instruction Manual 308265

Part No. Length224682 25 ft. (7.6 m)224684 50 ft. (15 m)224686 100 ft. (30.5 m)

235301 Power Supply - Used to supply low voltage DC powerto 224117 E/S Display Module. Refer to Instruction Manual308265.

189762 Remote Voltage Display - Battery-operated meterdisplays actual spraying voltage. Remote mount outsidehazardous area. Connects to gun via fiber optic cable. Refer toInstruction Manual 308265.

Fiber Optic Cable AssemblyFor connection between gun manifold and display module(189762 or between gun manifold and bulkhead connector.Refer to Instruction Manual 308265.

Part No. Length224672 25 ft. (7.6 m)224674 50 ft. (15 m)224676 100 ft. (30.5 m)

kV Display Kit236917 with 25 ft. (7.6 m) fiber optic cable236919 with 50 ft. (15 m) fiber optic cable236921 with 100 ft. (30.5 m) fiber optic cable. Includes remotevoltage display (189762)

236853 Dump Valve - Mounts directly to manifold for fasterflushing and color change

236854 Fluid Regulator - Air-piloted fluid regulator mounts atmanifold for precise fluid control.

245324 Pro Auto Xs High Conductivity Conversion Kit - Forconverting a PRO Auto Xs standard coating gun to a highconductivity PRO Auto Xs spray gun

TEST EQUIPMENTPaint Resistivity Meter (used together)

722886 Meter722860 Probe

236003 High Voltage Probe and Meter - Complete assemblyincludes high voltage probe, meter and ground wire.

241079 Megohmmeter - Used to check gun resistance andpart grounding

245277 Test Equipment Kit - Includes 236003 High VoltageProbe, 245278 PRO Xs Cartridge and Alternator Test Fixture,189351 Alignment Sleeve, carrying case and instruction manual

135



Fine Finish Products

HVLP 3800ProComp

Sprayer Part No.• 233423

Gun & Hose• Pressure Fed Turbine CupGun

• 30 ft. (9 m) turbine air andcompressor hose

• 60 in. (1.5 m) material hose• 54 in. (1.4 m) turbine air whiphose

Turbine• 4 stage, 2 speed• 8 PSI (0.552 bar, 55.2 kPa)

Outlet Flow Rate• 82 CFM (2322 lpm)

Compressor Horsepower• 1/25

Pressure Pot• 2 qt. (1.9L) remote cup withregulator and gauge

Fluid Sets Included• #3, #4, #5

Filters• Foam pre-filter• Automotive main filter• Filter warning light

Dimensions (WLH)• 20 x 16 x 16 in.(51 x 40 x 40 cm)

Weight• Bare - 27 lb. (12.2 kg)• Complete 39 lb (17.7 kg)

Manuals• Instruction - 309245

HVLP 4900ProComp


Gun & Hose• Pressure Fed Turbine Cup

Gun• 30 ft. (9 m) turbine air and

compressor hose• 60 in. (1.5 m) material hose• 54 in. (1.4 m) turbine air whip

hose




Pressure Pot• 2 qt. (1.9L) remote cup with

regulator and gauge

Fluid Sets Included• #2, #3, #4, #5, #6



Weight• Bare - 27 lb. (12.2 kg)• Complete 39 lb (17.7 kg)


HVLP ProCart


Gun & Hose• No Gun or Fluid Set• 30 ft. (9 m) turbine air and

compressor hose

Turbine• 3 stage• 6 PSI (0.414 bar, 41.4 kPa)



Pressure Pot• 2 qt. (1.9L) remote cup with

regulator and gauge



Dimensions (WLH)• 18.4 x 32 x 18 in.(47 x 79 x 46 cm)

Weight• 49 lb. (22.2 kg)


HVLP ProCart


Gun & Hose• Pressure Fed Turbine CupGun

• 30 ft. (9 m) turbine air andcompressor hose




Pressure Pot• 2 qt. (1.9L) remote cup withregulator and gauge



Dimensions (WLH)• 18.4 x 32 x 18 in.(47 x 79 x 46 cm)

Weight• 50 lb. (22.7 kg)




Fine Finish Products (cont’)

FinishPRO 390


Max Tip: .020

Max PSI/Bar• Air Assisted - 2600/180• Airless - 2600/180

Max. gpm/pm: 43/1.6

Pump Motor hp: 5/8 hp AC

Compressor Motor hp: 1 hp AC

Compressor Air Output:• 3.2 cfm @35 psi (82(lpm)

Weight lbs/kg: 78/35

Max Ext.Cord Support• Up to 300’ of min. 14gauge 3-wire extensioncord

Gun• G40 Air Assisted Gun

Hose (Bonded)• 3/16” x 50’ (4.8 mm x

15 m) BlueMax II 3300psi (227 bar)

• 3/8” x 50’ (9.5 mm x 15 m)air hose

Tips• RAC X FFT210,LTX517

Inlet Strainer• Part #246385

Pump Filter• 100 mesh Easy Out fitter

Sprayer Dimensions (WLH)• Lo-Boy - 22 x 28 x 25 in.(56 x 7 x 64 cm)

Wear Parts• Packing Kit - 244194• Rod - 249125• Cylinder - 243176

Complete Pump Lower• Part #249127

Manuals• Operation - 311905• Repair - 311911• Pump - 309250• Gun - 311937

FinishPRO 395


Max Tip: .021

Max PSI/Bar• Air Assisted - 3300/227• Airless - 2800/193

Max. gpm/pm: 47/1.8

Pump Motor hp: 7/8 hp AC

Compressor Motor hp: 1 hp AC

Compressor Air Output:• 3.2 cfm @35 psi (82(lpm)


Max Ext.Cord Support• Up to 300’ of min. 14gauge 3-wire extensioncord

Gun• G40 Air Assisted Gun

Hose (Bonded)• 3/16” x 50’ (4.8 mm x

15 m) BlueMax II 3300psi (227 bar)

• 3/8” x 50’ (9.5 mm x 15 m)air hose

Tips• RAC X FFT210,LTX517

Inlet Strainer• Part #246385

Pump Filter• 100 mesh Easy Out fitter

Sprayer Dimensions (WLH)• Hi-Boy - 23 x 28 x 32 in.(58 x 71 x 8 cm)

Wear Parts• Packing Kit - 244194• Rod - 249125• Cylinder - 243176

Complete Pump Lower• Part #246428

Manuals• Operation - 311905• Repair - 311911• Pump - 309250• Gun - 311937

HVLP 2500


Gun & Hose• HVLP Turbine Cup Gun• 30 ft. (9 m) turbine air hose



Compressor Horsepower• N/A

Pressure Pot• N/A

Fluid Sets Included• #3

Filters• Foam pre-filter• Foam main filter


Weight• Bare - 21 lb. (9.5 kg)• Complete 32 lb. (14.5 kg)

Manuals• Gun - 309205• Sprayer - 309240

HVLP 2500






Pressure Pot• N/A






HVLP 2500






Pressure Pot• N/A






137



HVLP Turbine Gun

Description Part No.

HVLP Turbine Gun with #3 Fluid Set 244117

HVLP Turbine Gun only 244113

Pressure-Fed HVLP Turbine Gun with #3 Fluid Set 244118

Pressure-Fed HVLP Turbine Gun only 244115

Concentrate on applying the finish, notworking the gun!

Get superior results with Graco’s HVLPTurbine Gun! It works with our HVLP 2500,3800 and 4900 sprayers, and it creates asmooth, fine spray for the highest qualityfinish available.

Easy Access Controls• Fluid, air and pattern controls conveniently

located on back side of gun

2 Finger Trigger and Ergonomic Handle• EasyGlide trigger has up to 75% lighter pull

than competition• 2-finger trigger design gives more control

while spraying• Form-fitted handle for comfort while spraying.

Industrial Packings• Provide maximum performance and longer life• External adjustment nut extends packing life• Simple to service in the field

Exclusive Duckbill Check Valve• Protects gun air passages from paint

contamination• Easy to maintain or replace

Adjustable Siphon Tube• Adjust easily for up, down or sideways

spraying

Quick-Change Fluid Sets• No tools or adjustments needed

Universal Air Cap• One air cap fits all fluid sets• Creates the highest quality spray on the

market



Aluminum Non-ASME Pressure CupsAir Spray and HVLP Supply System

Pressure CupsInlet Wetted Instruction

Part No. qt. (l) npsm (f) Parts Manual

•239802 1 (0.95) 3/8 304 SST 308791Note: Single regulator assembly

•239803 1 (0.95) 3/8 304 SST 308791Note: Double regulator assembly

•239804 1 (0.95) 3/8 304 SST 308791Note: Remote assembly with hoses

•239801 Pressure Cup Only

• Waterbornw Compatible

Gravity CupsCapacity Fittings Wetted Instruction

Part No. FL. oz (cc) npsm (f) Parts Manual

•239714 16 (473) 3/8 bottom entry Nylon Cup 308792SST Fitting

•239715 8 (236) 3/8 bottom entry Nylon Cup 308792SST Fitting

Siphon CupsCapacity Fittings Wetted Instruction

Part No. FL. oz (cc) npsm (f) Parts Manual

•239582 32 (496) 3/8 SST 308792

•239583 16 (236) 3/8 SST 308792

3M PPS Cup System

Description 6 oz. 25 oz. 32 oz.

Cup & Collar (box of 8) 234941 234771 234937Lid & Liner (box of 50) 234940 234772 234938Measurement Insert (box of 100) 234942 15F531 234939

234837 Gravity Kit (25 oz)

One each: cup, collar, lid, liner and

adapter

234775 Siphon Kit (25 oz. )

One each: cup, collar, lid, liner and

adapter

15E470 3M PPS Lid Dispenser

15E469 3M PPS Liner Dispenser

15E467 3M PPS Gun Tray

15D684 3M PPS Siphon Feed Adapter

15C464 3M PPS Gravity Feed Adapter

310693 Instruction Manual

139



TritonAir Spray /HVLP Spray Packages

Features and Benefits

• Diaphragm pump designed specifically for finishing

applications:

- low pulsation output

- constant flow to spray gun

- consistent, high finish quality pattern on parts

• Performs complete color changes in less than three minutes

• Refill and monitor material level in material container while

continuing to spray

• Durable, rugged aluminum or stainless steel construction

provides low cost of ownership.

Typical Applications

• Applying primers, basecoats and topcoats for:

- General metal fabrication

- Farm and construction

- Truck and bus

- Automotive components and touch-up

• Spraying stains, sealers, lacquers and topcoats for:

- Wood furniture and cabinetry

- Wood windows and doors

- Customized wood

Typical Fluids Handled

• NGR stains

• Washcoats

• Nitrocellulose lacquers

• Acid-catalyzed lacquers

• Enamels

• Toners

• Sealers

• Epoxies

• Polyurethanes

• Alkyds

Triton Pail Mount233470

Triton Wall-Mount233491

Triton Stand-Mount233477

Triton Cart-Mount233484



TritonAir Spray /HVLP Spray Packages

141



Falcon 10:1 and 20:1Air -Assisted Spray Packages


• Affordable, entry-level air-assisted spray package, ideal for

wood finishing applications

• Small, compact pump design is quick to flush and clean,

minimizing material costs and waste.

• Low pulsation pump provides excellent finish quality and

consistent atomization

• Durable pump lower with all stainless steel construction


• Wood furniture and cabinetry

• Wood windows and doors

• Custom wood shops

• General metal fabrication


• Catalyzed lacquers

• Polyurethanes

• Waterborne lacquers

• Primers, stains



MerkurAir -Assisted Spray Packages


• Wide range of pump ratios available including 15:1; 20:1;

30:1 and 40:1

• Pumps available in bare, wall mount and cart mount

• Better finish with consistent pattern and film

• More speed and multiple gun capabilities

• Handles a wide range of fluids

• Comfortable working conditions

• Higher pump ratios deliver a full range of material

viscosities

• Full line of products for any application





• General metal




• Shear sensitive coatings

143



MerkurAir -Assisted Spray Packages



Check-Mate 200Priming Piston Fluid Pumps

Check-Mate 200 pumps provide fluid flow to 0.75 gpm (2.84 lpm)

and operating pressures to 4600 psi (320 bar, 32 MPa)


• Severe Duty rod and cylinder for increased durability;

Graco’s Severe Duty is a stainless steel, hard chrome

cylinder and rod which prolongs the life of the pump and

packings.

• SST models for waterborne compatibility

• Large internal porting for maximum flow

• Floating piston seal and priming plate improve balance and

performance.


• Dispensing of silicone, latex or acrylic sealants

• Feed pumps for 2-component epoxy or urethane materials

• Dispensing of greases and other lubricants


• Sealants

• Adhesives

• Ink

• Mastics

• Lubricants

145



Check-Mate 200Priming Piston Fluid Pumps



Check-Mate 800CS and SST Priming Piston Fluid Pumps

Check-Mate 800 pumps provide flow rates to 2.8 gpm (10.6 lpm)

and operating pressures to 5850 psi (403 bar, 40.3 MPa)


• Severe Duty rod and cylinder for increased durability;

Graco’s Severe Duty is a stainless steel, hard chrome

cylinder and rod which prolongs the life of the pump and

packings.

• Available in Carbon Steel and Stainless Steel models

• 55 gallon (200 l) or 5 gallon (20 l) ram systems available

• 19:1 Senator; 31:1 Bulldog; and 65:1 King fluid power ratios

• High flow and pressures increase production

• High output per cycle reduces wear for longer life and

lower repair costs

• Floating piston seal and flow-through priming plate

improves pump loading of high viscosity materials


• Feeding applicators, meters or proportioners directly from

pails or drums

• Transferring sealants or adhesives to one or more operator

dispensing stations

• Transferring viscous chemicals in the formulation of high

viscosity materials

• Packaging drums, pails, caulking tubes or chubs


• Acrylics

• Butyl

• Epoxy

• Lubricants

• PVC Sealers

• Silicones

• Urethanes

147



Check-Mate 800CS and SST Priming Piston Fluid Pumps



2:1 StandardAir-Operated Piston Transfer Pump


• Air-powered for high reliability and low cost

• Delivery up to 2.5 gpm (9.46 lpm)

• Divorced-style drum for leak-free operation

• Mountings available for wall mount configurations


• Foam chemical supply

• Spray gun supply

• Dispensing valve supply

• Cleaning chemical supply

• Fluid transfer


• Solvents

• Adhesives

• Resins

• Catalysts

• Chemicals

149



Monark, President and SenatorAir-Assisted Spray Packages


• Air-assisted technology provides high transfer efficiency

for material savings and environmental compliance

• Extremely reliable and proven Monark, President and

Senator pumps

• Ergonomic and easy-to-use package for the operator

• Features G40 air-assisted gun and Pro Xs4 electrostatic

gun.


• Foam chemical supply

• Spray gun supply

• Dispensing valve supply

• Cleaning chemical supply

• Fluid transfer


• Solvents

• Adhesives

• Resins

• Catalysts

• Chemicals



Monark, President and SenatorAir-Assisted Spray Packages

151



Falcon 20:1Airless Spray Packages


• Affordable, entry-level airless spray package, ideal for fine

finishing applications

• Small, compact pump design is quick to flush and clean,

minimizing material costs and waste

• Low pulsation pump provides excellent finish quality and

consistent atomization

• Durable pump lower with all stainless steel construction





• General metal fabrication



• Polyurethanes


• Primers, stains



LineStriping Product Specifications

LineLazer 3400

Max Tip: .027 (one gun) -248861

Max PSI/Bar• 3300/227

Max. gpm/pm: .75/2.5


Engine Size: 4.0 HP Honda

Fuel Tank Capacity gallons/litres

• 0.66/2.5

Dimensions-Inches/Centime-ters

• 32 W x 40 H x 61 L81.3 W x 101.6 H x 154.9 L

Material Sprayed• Most common traffic paintsand architectural coatings

Typical Applications• Ideal for parking lots and sealcoat contractors, schools andpark departments.

Repair Kits:• Gun - 235474• Pump - 244194

Manuals• Operation - 311016• Repair - 311019

LineLazer IV 3900

Max Tip:• .036 (one gun) - 248862• .025 (two gun) - 248863


Max. gpm/pm: 1.25/4.7



Fuel Tank Capacity gallons/litres• 0.66/2.5

Dimensions-Inches/Centime-ters• 32 W x 40 H x 65 L

81.3 W x 101.6 H x 165.1 L

Material Sprayed• Most heavy, low VOC,

waterborne and rubberizedtraffic paints

Typical Applications• Continuous, heavy duty line

striping requirements



LineLazer IV 3900Auto-Layout System



Max. gpm/pm: 1.25/4.7





81.3 W x 101.6 H x 165.1 L


waterborne and rubberizedtraffic paints

Typical Applications• Continuous, heavy duty line

striping requirements• Parking Lot layout



LineLazer IV 5900



Max. gpm/pm: 1.6/6.0




• 0.95/3.6


• 32 W x 40 H x 65 L81.3 W x 101.6 H x 165.1 L

Material Sprayed• Most heavy, low VOC,waterborne and rubberizedtraffic paints

Typical Applications• Continuous, heavy duty linestriping requirements



153



LineStriping Product Specifications (cont’)

LineLazer 5900Auto-Layout System

Max Tip: .• .043 (one gun) - 253921• .029 (two gun) - 253954


Max. gpm/pm: .1.6/6.0




• 0.95/3.6


• 32 W x 40 H x 61 L81.3 W x 101.6 H x 165.1 L

Material Sprayed• Most heavy, low VOC,waterborne and rubberizedtraffic points

Typical Applications• Continuous, heavy-duty linestriping requirements

• Parking Lot layout



LineLazer IV 200HS



Max. gpm/pm: 2.15/8.14





81.3 W x 101.6 H x 165.1 L


waterborne and rubberizedtraffic points

Typical Applications• Continuous, heavy-duty line

striping requirements



LineLazer IV200HS

Auto-Layout System



Max. gpm/pm: 2.15/8.14





81.3 W x 101.6 H x 165.1 L


waterborne and rubberizedtraffic points

Typical Applications• Continuous, heavy-duty line

striping requirements• Parking Lot layout



LineDriverRide-On System

Operating Speed• Forward to 10 mph (16 km/h)• Reverse to 6 mph (10 km/h)




• 0.95/3.6


• 26 W x 41 H x 58 L66 W x 104 H x 147 L

Material Sprayed• Most heavy, low VOC,waterborne and rubberizedtraffic points

• Parking lots

Typical Applications• Continuous, heavy-duty linestriping requirements

• Parking Lot layout• Roadline Layout jobs




ProBatchMeters and Controls

Eliminate the need kits and hand-mixing with the economical

ProBatch dispense system that accurately dispenses multiple-

color, plural component paints and lacquers.


• Replaces kits by dispensing only what is needed

• Dispenses batches as small as 4 oz. with 1% accuracy

• Centralized dispense of fluids into a cup gun or 5 gallon

(18.93 l) container

• Intrinsically-safe

• Manual-add features for specialty materials

• Compatible with Graco’s PrecisionView AMR 2.0 software

for quick and easy reporting

• Adjustable dispense positions to accommodate most

containers


• Finishing

- Aerospace manufacturer

- Commercial airlines

- Military

- Signs

- Aerospace feeder

- Automotive feeder

- Furniture

- Trailers

• Touch-Up

- Automotive

- Truck and bus

- Farm and construction

- Recreational vehicles

• General

- Any 2 or 3 component paint application

- Any application with multiple colors using less than 25

gallon s (95 liters) per day.


• Solvents

• Lacquers

• Primers

• Solventborne paints/catalysts

• Waterborne paints/catalysts

ProBatch244441(Six Valve Unit)

155



Precision Mix II and Precision Mix II 3KElectric Proportioners

Multi-color, high volume plural component proportioners

handle two or three component materials for a superior finish

and control.


• Easy-to-operate with simple push-button recipe selection

from a remote operator station

• Quick color changes save time and money

• Consistently delivers on-ratio material to ensure quality

finishes

• Reduces material costs by effectively managing mix material

and limiting solvent usage during flushing


• Automotive

• Construction

• Farm

• Bus

• Auto Feeder

• Truck

• Wood

• TV


• PrecisionMix II

- Two component epoxy or polyurethane materials

- Accommodates up to 12 resin colors and 3 catalysts

• PrecisionMix II 3K

- Component epoxy or polyurethane materials

- Accommodates up to 10 resin colors, three catalysts and



Proportioner Family Comparison Chart

ProMix EasyEasy to use single color proportionerGet superior ration assurance with these air spray and air-assisted units!Easy to use and affordable, the ProMix Easy is an entry-level unit forsingle-color electronic proportioning.

ProMix IIAutomatic color change for manual applicationsFlush and color change your system without ever leaving the booth! Thisupgrade in electronic proportioning offers an intrinsically-safe fluid paneland operator station for precise and reliable performance in multi-colorapplications.

ProMix AutoIntegrated color change for automatic applicationsTake your proportioning applications to the next level with fast colorchange and closed loop flow control. This electronic plural componentproportioner offers exceptional accuracy in automatic applications.

PrecisionMix IIIntegrated color change for demanding applicationsThe ultimate solution for manual or automatic applications! With inte-grated color change and a modular design, the PrecisionMix II offers thehighest level of technology and control.

PrecisionMix II 3KIntegrated color change for three component applicationsGet superior technology and control! With advanced, user-friendlytechnology, easy setup and standard reporting, this proportioner effec-tively manages three-component materials

Graco Table of Contents - Fluid Air 2007.pdf · Graco universal-length dispense pumps consist of a...

Documents

Transcript of Graco Table of Contents - Fluid Air 2007.pdf · Graco universal-length dispense pumps consist of a...