GPT SERIES-60MPA 600BAR 08-08

GENERAL PRESSURE TRANSDUCERSGPT SERIES 60MPa / 600BAR

深圳市易测电气有限公司

2

GENERAL PRESSURE TRANSDUCERS

DESCRIPTION

VALUE TO CUSTOMERS

Offset

Full Scale Span

Non-Linearity

Hysteresis

Non-Repeatability

Thermal Effect on Offset

Thermal Effect on Span

Thermal Hysteresis

AccuracyTotal

Error Band= =

Honeywell's GPT Series Pressure Transducers use piezoresistive sensing

technology with ASIC (Application Specific Integrated Circuit) signal

conditioning in a stainless steel housing with electrical connector. The

GPT Series are fully calibrated including temperature compensation

from 0ºC to 80ºC.

Total Error Band (TEB) (±2.0 %FSS): Provides the most

comprehensive, clear and meaningful indication of the transducer's

true measurement performance over a specified temperature range;

small error promotes system uptime and efficiency. (See Figure 1.)

Figure 1. TEB and Accuracy Definition

High insulation resistance and dielectric strength: Protect the user

and transducer in high over-voltage situations, and ensure that the

device is compliant with industry standards.

Robust EMC performance: Operate reliably in the presence of

electromagnetic fields, such as near wireless signals, RF

communication, and electrical devices.深圳市易测电气有限公司

FEATURES AND BENEFITS

DIFFERENTIATION

FEATURES

POTENTIALAPPLICATIONS

PORTFOLIO

3

Efficient: Proven tight TEB and accuracy (See Figure 1.).

Great customer value: Multiple configuration possibilities with the

right combination of features provide flexibility of use in the

application; configurability on standard ports, pressure reference type,

and pressure range and output.

Durable: Provides the tough environmental specs needed, including

insulation resistance and dielectric strength, and EMC performance.

Fully media isolated

Pressure range: 5MPa - 60MPa (sealed gage)

Output: 4-20mA, Ratiometric and Regulated

Fully calibrated and temperature compensated

Total Error Band: ±2.0 %FSS from 0 °C to 80 °C

Insulation resistance: >100 Mohm, 500 Vdc

Dielectric strength: 250 Vac, 1 min.

EMC: Heavy Industrial Level

Response time: <2 ms TYP. (without snubber)

RoHS, REACH, and CE compliant

Industrial: Machine Tools

Transportation: Construction Machinery, Agriculture Machinery

Honeywell’s GPT Series joins the PX2 Series, PX3 Series, MLH Series, and

SPT Series heavy duty pressure transducers.


GPT SERIES

Characteristic Parameter

Output Code AA

Output 10%-90% Vs

4.75-5.25Vdc

±16 Vdc

BC

1-6Vdc

8-32Vdc

±36 Vdc

BE

0.5-4.5Vdc

8-32Vdc

±36 Vdc

BF

0-10Vdc

12-32Vdc

±36 Vdc

CH

4-20mA

8-32Vdc

±36 Vdc

Supply Voltage (Vs)

Over and reverse Voltage


Operating temperature range -40 ºC to 85 ºC

Storage temperature range -40 ºC to 125ºC

Compensated temperature range 0 ºC to 80ºC

Accuracy 1 ±0.5%FSS

Total Error Band 2 ±2%FSS over 0 ºC to 80ºC

Response time <2 ms TYP (10% to 90% step change in pressure) without snubber

Turn on time 3 <7 ms

EMC rating

Electrostatic discharge ±4 kV contact, ±8 kV air per IEC 61000-4-2

Radiated immunity 10 V/m (80 MHz to 1000 MHz) per IEC 61000-4-3

Fast transient burst ±1 kV per IEC 61000-4-4

Surge Immunity ±1 kV per IEC 61000-4-5

Immunity to conducted disturbances 3 V per IEC 61000-4-6

Radiated emissions40 dB (30 MHz to 230 MHz), 47 dB (230 MHz to 1000 MHz) per CISPR 11:2009, A1:2010

Radiated immunity 4 >100V/m (200 to 2500 MHz) per ISO 11452-2

Insulation resistance >100 Mohm, 500 Vdc

Dielectric strength 250 Vac, 1 min.

Load resistance Voltage output: 2k ohm min; Current Output: (Vs-8)*50 ohm max

Life 10 million cycles minimum to 90% full scale pressure

4



Pressure Reference Definition

Sealed gageThe output is calibrated to be proportional to the difference between applied pressure and a reference of 1 standard atmosphere (1.013 barA).

Table 4. Pressure Ratings

Table 3. Pressure Reference Definitions

MPa Bar

Rated Pressure

<=6

7

10

<=25

35

40

50

60

Over Pressure

3XFS

2.5XFS

1.7XFS

3XFS

62.5

2.5XFS

2.5XFS

2.5XFS

Burst Pressure

5XFS

5XFS

3.5XFS

5XFS

125

5XFS

5XFS

5XFS

Rated Pressure

<=60

70

100

<=250

350

400

500

600

Over Pressure

3XFS

2.5XFS

1.7XFS

3XFS

625

2.5XFS

2.5XFS

2.5XFS

Burst Pressure

5XFS

5XFS

3.5XFS

5XFS

1250

5XFS

5XFS

5XFS


Vibration 20 G sweep, 10 Hz to 2000 Hz

Shock 100 G per MIL-STD-202G, Method 213B, Cond. C

Humidity 0 %RH to 95 %RH, non-condensing

Wetted materials Port and Diaphragm:17-4PH;Gasket:NBR

External materialshousing connector

304 stainless steelPBT 30% GF

5

1Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the

pressure range at 25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and pressure

non-repeatability. See Figure 1.

2Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and

pressure range. Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, pressure

non-repeatability, thermal effect on offset, thermal effect on span, and thermal hysteresis. See Figure 1.

3Turn on time: Duration from power applied until first valid output.

4Radiated immunity: This characteristic is only for 4 to 20mA current output.


GPT SERIES

Nomenclature and order guide1

General Pressure Transducer

Port TypeN1 = NPT 1/4 - 18N2 = NPT 1/8 - 27N3 = NPT 1/2 - 14S2 = 7/16-20 UNF SAE J1926-3M1 = M12 X 1.5 ISO 6149-3M2 = M10 X 1 ISO 6149-3M3 = M14 X 1.5 ISO 9974-2G1 = G1/4 ISO 1179-3G3 = G1/4 ISO 1179-2G4 = G3/8 ISO 1179-2G5 = G3/8 ISO 1179-3G6 = G3/8 JIS B2351G7 = G1/4 JIS B2351P1 = PT1/4 ISO 7/1P2 = PT1/8 ISO 7/1

Order Code1Y = with snubberN = without snubber

G = Technical Type 1M = Technical type 2

A = Packard Metripak 150B = Micro M12 IEC 61076-2J = Din EN 175301-803AK = HV040 SUMITOMO ELECTRICL = AMP Superseal 1.5

Connector Type

Order Code2one character letter/number for pinout definition

Output Transfer FunctionAA = Ratiometric 5.0 V 10% to 90% VSBC = Regulated 1 Vdc to 6 VdcBE = Regulated 0.5 Vdc to 4.5 VdcBF = Regulated 0 Vde to 10 VdcCH = Current 4 to 20 mA

Pressure ReferenceS = Sealed GageG = Gage Vent

Pressure Range050B = 50bar ; 005G = 5MPa 060B = 60bar ; 006G = 6MPa 160B 160bar ; 016G = 16MPa 200B 200bar ; 020G = 20MPa 250B 250bar ; 025G = 25MPa350B 350bar ; 035G = 35MPa 400B = 400bar ; 040G = 40MPa500B = 500bar ; 050G = 50MPa600B = 600bar ; 060G = 60MPa

Packaging Calibration

SeriesConnector

Type Port TypeOrder Code1

Technical Type

Pressure Range

Pressure Type Output

Order Code2

GPT X XX X G XXX X X XX X

6

1Continuing development some configuration of pressure range, pressure reference, pressure port , electrical terminal and

transfer function, please consult with Honeywell representative.

2Clogging of the snubber holes may occur in liquids containing particles which may cause wrong output.深圳市易测电气有限公司


A=Delphi Metri-Pack150 B=Micro M12 IEC 61076-2

Connector:DELPHI 12078088Mating Connector:DELPHI 12110192IP Rating:IP65

Mating Connector:4 POS TYPE D IP Rating:IP 67

PIN NO VoltageOutput

PINNO

A GND 1 Vs Vs Vs VsB Vs 2 NC -- RTN

C Vout

CurrentOutput

RTNVs

NC3 RTN RTN NC NC4

VoltageOutput

CurrentOutput

Vs-- --

GNDVout NC

Vs

GND

VoltageOutput

CurrentOutput

CurrentOutput

CurrentOutput

Vout

-- -- RTN --Standard Option1 Option2 Option3

Mounting Dimensions Shows by Connectors (Reference only :mm [in])

7


J=DIN EN 175301-803A L=AMP Superseal 1.5

Mating Connector: DIN EN 175301-803A, 18mmIP Rating: IP65

Mating Connector: AMP Superseal 1.5;IP Rating: IP67

PIN NO VoltageOutput PIN NO

1 Vs22

CurrentOutput

3 NC

VoltageOutput

VoltageOutput

CurrentOutput

VsGND RTN

Vout

1 Vs

3 NCPE

VsGND RTNVoutNC NC

GPT SERIESMounting Dimensions Shows by Ports (Reference only :mm [in])

8

K-Sumitomo (HV040)

Connector: HV series-4775Mating Connector: HV series6189-7037IP Rating: IP67

PIN NO

A VsB GND

C Vout

CurrentOutput

VsRTN

NC


G4=G3/8 ISO 1179-2

Seal:O-ring2,3

Mating Geometry: ISO 1179-1 Installation Torque1 :50 N m [38.9 ft Ib]

G6=G3/8 JISB2351

Seal:O-ring2,3

Mating Geometry: JISB 2351 Installation Torque1:50 N m [38.9 ft Ib]

9

G3=G1/4 ISO 1179-2

Seal: O-ring2,3

Mating Geometry: ISO 1179-1Installation Torque1: 50 N m [38.9 ft lb]

M3=M14X1.5 ISO 9974-2

Seal: O-ring2,3

Mating Geometry: ISO 9974-2Installation Torque: 50 N m [11.04 ft lb]

S2=7/16-20 UNF SAE J1926-3

Seal: O-ring2,3

Mating Geometry: SAE J1926-3Installation Torque1: 50 N m [38.9 ft lb]

G7=G1/4 JIS B2351

Seal: O-ring2,3

Mating Geometry: JIS B2351Installation Torque1: 50 N m [38.9 ft lb]

G5=G3/8 ISO 1179-3

Seal:O-ring2,3

Mating Geometry: ISO 1179-1 Installation Torque1:50 N m [38.9 ft Ib]

“P”=20.5[0.807]

11.2

1Straight thread maximum torque is validated to 90Nm installation torque2Seals for port are included and assembled to the sensor3Seal for port order codes G3 M3 is NBR -30°C to 100°C, others are Buna N -30°C to 125°C


CautionPRODUCT DAMAGE

• application. Values provided are for reference only. (Mating

torque values from one application to the next.)• When using mating parts made of stainless steel, use a thread

sealant with anti-seize properties to prevent thread galling. Ensure the sealant is rated for the application.

• Use appropriate tools (such as an open ended wrench or deep well socket) to install transducers.

• Always hand-start transducers into the hole to prevent cross threading and damage.

• Ensure that torque is not applied to the electrical connector.• Ensure that the proper mating electrical connector with a seal is

used to connect the transducer. Improper or damaged seals can compromise ingress protection leading to short circuits.

Failure to comply with these instructions may result in product damage.

ADDITIONAL INFORMATIONThe following associated literature is available on the Honeywell web site

at sensing.honeywell.com:

• Product line guide

• Product range guide

• Product installation instructions

• Application notes:

- Heavy Duty Pressure Transducers, PX2 Series and PX3 Series

- PX2 Series and PX3 Series Heavy Duty Pressure Transducers for

Potential Use in Industrial Refrigeration

- PX2 Series and PX3 Series Heavy Duty Pressure Transducers for

Potential Use in Industrial HVAC/R Applications

• Technical Notes:

Transducers, PX2 Series and PX3 Series

• CAD models, please contact with Honeywell at sensing.honeywell.com

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of defective

materials and faulty workmanship. Honeywell’s standard product warranty

applies unless agreed to otherwise by Honeywell in writing; please refer to

warranty details. If warranted goods are returned to Honeywell during the

period of coverage, Honeywell will repair or replace, at its option, without

The foregoing is buyer’s sole

remedy and is in lieu of all other warranties, expressed or implied,

purpose. In no event shall Honeywell be liable for consequential,

special, or indirect damages.

While we provide application assistance personally, through our literature

and the Honeywell web site, it is up to the customer to determine the

suitability of the product in the application.

is believed to be accurate and reliable as of this printing. However, we

assume no responsibility for its use.

WARNINGPERSONAL INJURY

DO NOT USE these products as safety or emergency stop devices

or in any other application where failure of the product could result in

personal injury.

Failure to comply with these instructions could result in death or serious injury.

WARNINGMISUSE OF DOCUMENTATION

• The information presented in this datasheet is for reference only. Do not use this document as a product installation guide.

• Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or serious injury.

SPS-GPT SERIES-60MPA / 600BAR-July. 2019-EN012019

上海市浦东新区张江高科技园区环科路 555 号 1 号楼

供应链协同解决方案传感智联

官方网站：sensing.honeywell.com.cn服务热线：400 639 6841官方邮箱：[email protected]


GPT SERIES-60MPA 600BAR 08-08

Documents

Transcript of GPT SERIES-60MPA 600BAR 08-08