GPS PPT
-
Upload
monalisha-dash -
Category
Documents
-
view
932 -
download
0
Transcript of GPS PPT
![Page 1: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/1.jpg)
PROTECTOIN OF TRANSMISSION LINES USING
GPS
SUBMITTED by: MONALISHA DASH BRANCH: ELECTRICAL Regd no: 0701208143
![Page 2: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/2.jpg)
CONTENTSINTRODUCTIONTRANSMISSION SYSTEMTRAVELLING WAVE FAULT LOCATIONTRAVELLING WAVE FAULT THEORYCAUSES OF FAULTWHAT IS SIGNALFAULT LOCATION USING GPSSOURCES OF GPS SIGNAL ERRORSADVANTAGES & DISADVANTAGESCONCLUSION
![Page 3: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/3.jpg)
This is a new technique for the protection of transmission systems by using the global positioning system (GPS) and fault generated transients.In this scheme the relay contains a fault transient detection system together with a communication unit, which is connected to the power line through the high voltage coupling capacitors of the CVT.Relays are installed at each bus bar in a transmission network. These detect the fault generated high frequency voltage transient signals and record the time instant corresponding to when the initial traveling wave generated by the fault arrives at the busbar. At each substation relay determine the location of the fault by comparing the GPS time stay measured locally with those received from the adjacent substations. Power companies and utilities have fundamental requirements for time and frequency to enable efficient power transmission and distribution.Repeated power blackouts have demonstrated to power companies the need for improved time synchronization throughout the power grid. Analyses of blackouts have led many companies to place GPS-based time synchronization devices in power plants and substations.
INTRODUCTION
![Page 4: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/4.jpg)
GENERATION TRANSMISSION DISTRIBUTION
TRANSMISSION SYSTEM
![Page 5: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/5.jpg)
WHAT IS TRAVELLING WAVE FAULT LOCATION?
Faults on the power transmission system cause transients that propagate along the transmission line as waves.These waves have a propagation velocity & characteristic impedance , travel from fault location towards line ends
![Page 6: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/6.jpg)
The location of faults is accomplished by precisely time-tagging wave fronts as they cross a known point typically in substations at line ends.
Fault location can then be obtained by
multiplying the wave velocity by the time difference in line ends.
![Page 7: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/7.jpg)
TRAVELLING WAVE FAULT LOCATION THEORY
Travelling wave fault locators make use of the transient signals generated by the fault.
Unlike other fault location systems,the travelling wave fault locator is unaffected by load conditions.
Precisely synchronised clocks are the key element in the implementation of this fault location technique.
The required level of clock accuracy has only recently been available at reasonable cost with the introduction of the Global Positioning System.
![Page 8: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/8.jpg)
BENEFITS OF TRAVELLING WAVE FAULT LOCATION
Early fault locators used pulsed radar.
Radar equipment is typically mobile or located at substations and requires manual operation.
Travelling wave fault locators are becoming popular where higher accuracy is important.
GPS-based sub microsecond timing system has proven reliable in several utility travelling wave projects.
![Page 9: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/9.jpg)
POSSIBLE CAUSES OF FAULT
![Page 10: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/10.jpg)
FAULT LOCATION USING GPSGlobal Positioning System (GPS) is a satellite-based navigation system made up of a network of 24 satellites placed into orbit. Originally intended for military applications
Allows precise determination of location, velocity, direction and time.
![Page 11: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/11.jpg)
HOW GPS WORKS?GPS satellites circle the earth twice a day .
Transmit signal information to earth.
Receivers take this information and calculate the user's exact location.
Accurate 3-D location require four satellites and 2-D position can be tracked using two satellites.
![Page 12: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/12.jpg)
WHAT’S THE SIGNAL?
GPS satellites transmit two low power radio signals. A GPS signal contains three different bits of information. -pseudorandom code,
-ephemeris data,-almanac data.
![Page 13: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/13.jpg)
HOW ACCURATE IS GPS?Today's GPS receivers are extremely accurate.GPS receivers are accurate to within 15 meters on average.12 parallel channel receivers are quick enough to lock onto the satellites and maintain strong locks even in dense foilage or urban settings with tall buildings. Newer GPS receivers with WAAS (Wide Area Augmentation System) capability can improve accuracy to less than three meters on average. Increased accuracy to within an average of three to five meters can be achieved with DGPS.
![Page 14: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/14.jpg)
OPERATION OF THE FAULT LOCATION SYSTEM(FLS) USING GPS
A fault locator remote is coupled to each end of line via CPT.
FL, a fancy electronic stop watch is synchronized to the common timing standard of UTC from GPS.
Fault resulting produces
traveling waves(transients).
The FL remote time tag the
transient arrival times.
![Page 15: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/15.jpg)
By knowing the line length L and the time-of –arrival difference (tb - ta ) distance X can be calculated from the FL equation:
X=[L-C(tb -
ta )]/2
ta & tb are end A
and end B arrival time
c-velocity of light
![Page 16: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/16.jpg)
SOURCES OF GPS SIGNAL ERRORS
Ionosphere and troposphere delays.
Signal multipath.
Receiver clock errors.
Number of satellites visible.
Satellite geometry/shading.
![Page 17: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/17.jpg)
ADVANTAGES
Protection of transmission line using GPS is extremely accurate.
Economical.
Fast response.
Reliability & availability
![Page 18: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/18.jpg)
DISADVANTAGES
GPS SIGNAL ERRORSo Ionosphere and troposphere delays.o Receiver clock errors.
Distortion in travelling wave causes fault location error. Climate dependant.
![Page 19: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/19.jpg)
CONCLUSION
Uses a dedicated fault detector to extract transient signal and GPS system to time tag these signals.
Traveling time of the transient signal from the point of fault to the adjacent substation is used to determine the fault position.
Proposed technique is able to offer a high accuracy in fault location.
Unlike traditional protection schemes , this technique offers a new concept in network protection.
![Page 20: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/20.jpg)
REFERENCES
Zhiqian Q Bo Weller, Tom Lomas and Miles A, Redfern “Positional Protection of Transmission system Using global Positioning System” IEEE Trans. On Power delivery, vol 15 no 4 oct 2008
http://www.howstuffworks.com/gps
http://www.gisdevelopment.net/technology/gps
![Page 21: GPS PPT](https://reader033.fdocuments.us/reader033/viewer/2022061205/54741578b4af9f702f8b45d1/html5/thumbnails/21.jpg)