GOVERNMENT OF PUDUCHERRY PUBLIC WORKS DEPARTMENT PSR 2010_11_Book.pdf · labour component. 9.2...

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

The Women & Children Hospital, Puducherry

PUDUCHERRY SCHEDULE OF RATES

2010-2011

MAHE REGION

GOVERNMENT OF PUDUCHERRY

PUBLIC WORKS DEPARTMENT

PUDUCHERRY SCHEDULE OF

RATES

2010-2011

MAHE REGION

., "FOREWORD

,The PSR for PWD Puducherry State was first published during the year 1998-99, later in

2003-04,2006-07,2007-08,2008-09 and 2009-10. Now the PSR for the year 2010-11 is prepared.

This schedule of rates is prepared by adopting the analysis and specifications based on

the latest CPWD 2007 analysis for arriving the finished rate for building works. The analysis and

specifications of Ministry of Road Transport, MORTH and Highways Specifications have been

followed for working out the finished rates for road and bridge works.

This Schedule of Rates i~ being used by number of Government Departments, Private

Sector Organizations, various Engineers, Contractors and Architects.

This Schedule of rates incorporates basic rates for labour and materials for building

works, road works, water supply works & sewerage works, irrigation works, bridge and culvert

works. The PSR 2010-11 is with effective from 1 .4.2010.

In respect of the irrigation works, the most frequently used items have been identified

and the rates were worked out considering the field observations and Madras Detailed

Standard Specification and CPWD analysis of rates wherever applicable.

In the PSR 2010-11 several items with ISI specification identifying best manufacturers for

materials, new products and technologies which are being used in Civil Engineering field have

been included.

In this PSR 2010-11, many new items such as UPYC readymade windows and ventilators

gypsum false ceiling, stainless steel handrails, JK/Birla wall putty, acoustic wall paneling, Jaquar

tap fittings linga coating for steel works to be used in bridges, polycarbonate sheets,

zincalumme/colour bonded roofing sheets, aluminium composite panels, rustic finished tiles

structural glazing etc., have been introduced. New products such as electrotherm 01 pipes,

many ceramic / vitrified tile brands such as Asian, NITCO, Kajaria and RAK tiles are introduced in

addition to the existing brands. Regarding steel item product of JSW brand is introduced in par

with SAIL, TISCON and YllAG. In addition to this for small works, usage quantity of ISI certified

TMT rods is enhanced from the existing practice of 10MT to 50MT of steel in the agreement.

However for water contact works such as bridges, culverts, OHT and other works which are

identified by the Engineer-in-charge, only TMT rod of YllAG / SAIL / TISCON / ISSCO/ JSW shall be

adopted even lesser quantities are contemplated.

The encouragement and guidance given by Thiru T .M. BALAKRISHNAN, I.A.S., Secretary

(Works), in bringing out the Puducherry Schedule of Rates which is belovedly acknowledged.

am sure that this Schedule of Rates will be quite useful to all concerned. ~(s. MA~AR)

CHIEF ENGINEERPWD, PUDUCHERRY

PuducherryJune, 2010

PREFACE

1. Puducherry Schedule of Rates 2010-11 are updated edition of the PSR 2009-10.

2. The Puducherry Schedule of Rates 2010-11 incorporates all the items included in the PSR

2009-10 and correction slip issued from time to time besides new items. The specifications of the

items have been upgraded to the latest CPWD specification 2007. The Schedule of Rates is

based on the current market rates for materials and labour. The basic rates have been

obtained from all the Circles and Divisions, from BAI, from the leading manufacturers for

branded products, local market, Department of Economics & Statistics and DGS&D rates and

the same have been finalized in the PSR meeting. The finished rates were arrived by using CPWD

analysis of rates 2007 and finalized by convening the PSR Standing Committee meeting on

20/05/2010 as per O.M.No. 4090/669/06-PW (B1) dt: 12/01/2007.

3. The Standing Committee of Schedule of Rate was framed under the Chairmanship of

Thiru S. MANOHAR, Chief Engineer of Public Works Department, Puducherry, with the following

members.

TVL:

S. Manohar Chief Engineer, PWD Chairperson

S. Manohar Superintending Engineer - Circle-I, PWD Member

N. Manthaiyan Superintending Engineer - Circle-II, PWD Member

R. Chandrasekaran Superintending Engineer – Circle-III, PWD

Member

S. Vaittianadane Director of Economics & Statistics Member

S. Alphonse Under Secretary (Works)

Member

P. Arivazhagan Executive Engineer (Planning) - Central office Member

J. Jayakumar Executive Engineer - Public Health, PWD

Member

V. Sathiamurthy Executive Engineer – Irrigation, PWD Member

Thiru R. Ganesan Senior Accounts Officer, PWD Member

A. Nagaraju Executive Engineer – Designs, PWD Member Secretary

4. The Committee meeting was convened on 24, 25 & 27/05/2010 and finalized the basic

rates of materials and labourers In the presence of all the Executive Engineers and contractors

from Builders Association of India.

5. The Delhi Schedule of Rates 2007 has been taken as a reference for inclusion of new

materials in respect of building works. Finished rates for building works have been adopted as

per the CPWD analysis of rates 2007. The specifications and analysis for the items under bridge

works are based on the Ministry of Road Transport and Highways (MORTH & MOST). Labour rates

and material rates have been finalized for all the four regions namely Puducherry, Karaikal,

Mahe and Yanam and exclusive Schedule of Rates has been brought out separately for each

region.

6. The rates and specifications incorporated in the PSR 2010-11 will become effective from

01/04/2010.

7. For works which are in riverbed (for river over 20 metre widths only) add 10% extra on

labour, earthwork and conveyance of materials within the riverbed. This extra percentage

should not be allowed for the cost of materials.

8. Within the Central Jail Compound 10% extra and Sub-Jail compound 5% extra is allowed

over the rates of labour, rates of works involving labour and rates for conveyance of materials

for the portion inside the jail campus (i.e. for the distance within the Jail Compound).

9. The current rates have been adopted for materials for which there are rate contracts,

running contracts in existence

10. Hire charges for plants, rates for materials, labourers and technical staff indicated in this

PSR are only to prepare the analysis of rates.

11. The works which are to be executed during night times due to heavy traffic during day

times and for various technical and administrative reasons and for major building works which

involves works during night times for continuity, will involve extra expenditure by way of making

arrangements of lighting and special transportation for working parties to odd hours. In the light

of the above nature, the Executive Engineers at their discretion may exercise their judgment

and cater for the additional cost to the maximum extent of 5%, keeping in view, the severities

and factors mentioned above. Support details for the extra cost based on actual site conditions

in specific cases will have to be provided with proper justification.

12. Suggestions from all sectors are invited for the improvement and refinement of this

schedule of rate.

SALIENT FEATURES OF PUDUCHERRY SCHEDULE OF RATES 2010-11

1.0 This Puducherry Schedule of Rates 2010-11 is the revised edition of Puducherry Schedule

of Rates 2009-10. But this PSR is totally based on the latest CPWD analysis of rates 2007.

2.0 This PSR 2010-11 incorporates most of the items of PSR 2009-10 with all correction slips

up-to date and will replace PSR 2009-10. The nomenclature of many items has been

improved by making it more generic and comprehensive. Items of PSR 2009-10, which

have become obsolete over a period of time or are not in use have been deleted.

Some items have been clubbed to facilitate quick measurements. Many new items

using new materials and latest technology have also been added.

3.0 Efforts have been made to introduce items pertaining to execution of different works by

using various electrical and mechanical equipments i.e. excavators, tower cranes,

mobile cranes, mechanical platforms, batch mix plant, transit mixers and pumps, piling

rigs, pneumatic cutters, chisels, chippers, hammers etc. Built-in provision has been taken

in the analysis of rates for new construction technology/mechanisation.

4.0 Items of dry work using prefabricated materials and pre-finished elements are included

for speedier construction viz gypsum block walls, calcium silicate and non-asbestos

cement board partitions, pre-finished counter tops for kitchen and washbasins, pre-

moulded and pre-finished stone work in risers and treads of steps and window sills, dry

stone cladding, sub-frames for windows, use of chemical and mechanical fasteners,

laying of tiles in flooring and dado with polymer based adhesives etc.

5.0 This schedule will be read along with CPWD specifications, 1996 Vol-I to VI with up-to

date correction slip nos. 1 to 19 & revised CPWD specifications 2002 for mortar, cement

concrete and RCC till these are amended/modified.

6.0 For the new items introduced PSR, new code nos. have been assigned as indicated in

the list of basic materials. The Finished Rates inclusive of Water Charges @ 1%,

Contractor’s Profit @ 15%, CESS @ 1% and VAT @ 2.8%.

7.0 Generally, the basic rates of materials, incorporated in the schedule, are pertaining to

materials conforming to BIS standards/CPWD specifications/materials of best quality

available in the market.

8.0 Lump sum provision of labour / T&P is replaced with mechanisation inputs. Prominent

items incorporating mechanization are earthwork in excavation, RMC/ BMC, brick work

in superstructure above floor-V level, road work, dismantling of RCC work, dismantling of

CC and flexible pavements, pile work etc.

9.0 Sub head wise salient features are as follows:

9.1 Earth work: Items of earth work in excavation in soils, ordinary rocks and hard

rocks by manual means have been modified to manual or mechanical means

and component of mechanization is included with corresponding reduction in

labour component.

9.2 Mortars: Items with lime mortar which are not in use now a days have been

deleted.

9.3 Concrete Work: Items of lime concrete which are not in use now a days are

deleted. Number of uses of steel and wooden shuttering reduced from 80 and

16 times to 40 and 8 times respectively, so that proper quality of shuttering is put

to use. In addition to this water proof plywood of 12mm thick centering with

spans and jacks have been newly introduced in this PSR.

9.4 Reinforced Cement Concrete: Minimum mix of RCC is kept as M25 instead of

M20 concrete. It is as per CPWD specifications, 2002 and IS:456:2000 for durability

of structures. New item of form work with 12mm water proof ply has been

included. Use of fly ash conforming to Grade-I of IS:3812 (pt.1):2003 has been

allowed in batch mix concrete and ready mixed concrete as part replacement

of OPC. Fly ash should be uniformly blended with cement in accordance of

Clause 5.2 & 5.2.1 of IS-456. Number of uses of steel and wooden shuttering

reduced from 80 and 16 times to 40 and 8 times respectively, so that proper

quality of shuttering is put to use. New item of applying decentring chemical to

the centering surfaces has also been included.

9.5 Brick Work: Items pertaining to brick work with lime mortar is deleted, since this

item is not in use now a days. Items of auto-claved aerated cement block

masonry, mechanized auto-claved fly-ash lime bricks & gypsum panel partitions

included.

9.6 Stone Work: New items of stone work for providing and fixing dry cladding at all

heights with 40mm thick gang saw cut sand stone etc., and structural steel frame

work for stone cladding (to be paid in kg.) has been added. Items of stone

masonry in cement mortar with fine sand and with lime mortar are deleted.

9.7 Marble Work: Measurement for area of marble/granite stone flooring modified

to two groups of up to 0.50 sqm and over 0.50 sqm. Items of pre-moulded and

pre-polished flooring in treads/ risers of staircase, kitchen/ washbasin counters

and window sills have been provided.

9.8 Wood Work: In addition to the existing Burma teak wood and Padauk wood,

imported vengai wood has been included for Puducherry and Karaikal regions

alone. Flush door shutters, veneer boards etc., wherever not mentioned in the

items earlier, have been added now. Ordinary glass panes substituted with float

glass which is to be specified by thickness and not by weight. Items of bamboo

jaffery fencing, magnetic catcher in cup board, mortice lock, telescopic drawer

channel included. FRP flush & panelled doors & frames and FRP chajjas

included.

9.9 Steel Work: Steel glazed doors and windows fixed, side hung, top hung, centre

hung, composite units including mullion bar and steel beadings are clubbed

together and to be paid in Kg in one item instead of earlier being measured in

sqm. Nomenclature modified to specify “Flash welding and Factory made” steel

glazed doors and windows in item. Stainless steel handrail has been newly

introduced.

9.10 Flooring: Items pertaining to extra for brick flooring in specified pattern, 25mm

and 50mm thick CC flooring, flooring and skirting in red oxide and other items not

in frequent use deleted. New item of laying tiles in flooring and dado with

polymer based adhesives included. Many ceramic/vitrified companies such as

Asian, NITCO, Kajaria and RAK tiles for different sizes are introduced in addition to

the existing tiles. Dazzle/ technic brands for concrete based stones are included

in addition to the existing Ultra/Eurocon brands.

9.11 Roofing: Non-asbestos cement sheet provided in place of asbestos cement

sheet roofing, items of corrugated GS sheet roofing-1.60mm thick and 1.25mm

thick deleted as theses are not readily available. 20mm thick wooden planks

ceiling, 18mm insulating board, 18mm flame retardant board on roofs deleted as

boards of these thicknesses are not readily available. Gypsum false ceiling,

Diakin mineral false ceiling tiles, aluminium composite panel works have been

included. Water proofing in terrace works and sunken floors have been

included. Colour coated roofing sheets has been included.

9.12 Finishing: Flush/ruled/struck/weathered pointing in brick work, tile work and stone

work clubbed. New item of 12mm thick gypsum plaster on brick/RCC surfaces

added. Items of plaster with lime deleted. Providing and mixing water proofing

material is to be paid in Kg per bag of cement instead of sqm.

9.13 Repair to Building: Making opening in brick masonry for doors, windows and

clerestory windows to be paid in sqm instead of being paid in numbers. Fixing

chowkhats in brick/RCC opening with mechanical/ chemical fasteners included.

Double scaffolding for repairs to building included. Items of wooden cleats,

safeda posts and hillock ballies deleted. Pointing with lime putty on brick/ tile

work deleted. Coal tarring on old work, floor painting with enamel paint, rubber

plug for sink/ wash basin etc., deleted. Ordinary glass panes changed to float

glass and thickness to be measured in mm. instead of weight.

9.14 Dismantling and Demolishing: New item of dismantling and demolishing by

pneumatic hammers, chisels, chippers etc., included.

9.15 Miscellaneous: UPVC windows has been additionally included.

9.16 Sanitary Installations: Items of long pan WC, CP brass trap and union, GI chain

with GI pull are not in use not a days and hence deleted. Relevant IS 1729 has

been mentioned with fittings of sand cast iron pipes. Fittings of centrifugally cast

iron pipes have been modified as “Sand cast iron S&S as per IS:3989” from

existing ‘Centrifugally cast (spun) iron S&S’, as fittings are not manufactured by

centrifugal process.

9.17 Water supply: CPVC pipes included. Item of close hole basin mixer pillar tap has

been deleted and ASTM pipes have been included. Supreme pipe has been

included along with the existing Jain and Finolex pipes for the sizes of 50mm and

above diameter pipes only. All the other ISI brand pipes such as Nandi, Trubore

etc., are included along with the existing companies from 15mm dia to 75mm

dia pipes. Litrewise electrotherm DI pipes has been included in addition to

JINDAL, LANCO and Electro steel brands. It was also suggested by the PSR

committee to provide ASTM and CPVC pipes instead of GI pipes for open and

concealed plumbing pipes.

9.18 Drainage: Item of stone ware pipes Grade-A with mixture of cement mortar 1:3

for storm water drains deleted. P-traps of size 125 x 100 and 180 x 100 deleted.

Manholes of size 90 x 80 and 60cm deep deleted as items of 45 cm depth and

extra for depth beyond 45 cm are available. Circular manholes 0.91m dia, 1.6m

deep deleted as items of 0.91m depth and extra for depth are available.

Similarly, circular manholes 1.22m dia, 2.29m deep and circular manholes 1.52m

dia, 4.18m deep deleted. Brick masonry open surface drain deleted. Brick

masonry work, plaster and excavation etc., shall be measured as per actual.

Item of Grease trap deleted as not executed now a days.

9.19 Pile Work: Mechanical equipments such as hydraulic piling rig, crane, bentonite

pump, vibrating pile driving hammer etc., have been introduced in place of

lump sum provisions. The labour coefficients have been reduced due to the

provisions made for mechanical equipments. Piles up to 1500mm dia have been

incorporated.

9.20 Aluminium Work: Powder coated and polyester powder coated aluminium

sections and “Z” sections included. Ordinary glass panes substituted with ‘float

glass panes’, MS adjustable hangers substituted with GI adjustable hangers for

false ceiling. Extra for providing anodic coating AC 25 instead of AC 15 on

aluminium sections included. Items of weather silicon sealant double glazed

hermetically sealed glazing added. Stainless steel adjustable friction window

stays for easy cleaning of glass on both sides from the room also included.

Aluminium sub-frame for windows and ventilators included. New items of tubular

handle bar with anodizing, powder coating and polyester powder coating, brass

lock for aluminium doors, aluminium window fasteners for windows, aluminium

round shape handles etc., included.

9.21 Horticulture & Landscaping: Rates of the items updated.

10.0 Due care has been taken to print the Schedule of Rates as correctly as possible. It is,

however, possible that some errors might have crept in. In case any error or omission is

noticed, it may be brought to the notice of the Executive Engineer, Computer Design

Centre, PWD, Puducherry.

11.0 Suggestions for improvement are welcome.

ACKNOWLEDGEMENT

The Schedule of Rates 2010-11 was finalized by the Standing Committee of Puducherry

Schedule of Rates under the Chairmanship of Thiru S. Manohar, Chief Engineer, PWD,

Puducherry and is gratefully acknowledged. Without the guidance and encouragement of

whom, this work would have not become a success.

The sincere efforts taken by the PSR Standing Committee of Puducherry comprising of

Thiru S. Manohar, Superintending Engineer (Circle-I), Thiru N. Manthaiyan, Superintending

Engineer (Circle-II), Thiru R. Chandrasekaran, Superintending Engineer (Circle-III), staff from the

Director of Economics & Statistics, Under Secretary (Works), Thiru A. Nagaraju, Executive

Engineer (Designs), all other Committee Members and other staff of the Computer Design

Centre, who have put up sincere effort in bringing out this Schedule of Rates 2010-11 is

acknowledged.

In this juncture, the sincere efforts put forth by the committee members in bringing out

this Schedule of rates are most acknowledgeable. Similarly the sincere efforts and strenuous

work done in compiling the new PSR 2010-11 through the computer software and based on the

latest CPWD analysis 2007 by Thiru R. Manickavasagam, Assistant Engineer, Thiru S. Karuthudiyan,

Junior Engineer, Thiru T. Sivakumar, Work Assistant, Thiru R. Batmanabane, Work Assistant,

Thiru K. Venkatachalapathy, Thiru S. Saravanakumar and Thiru V. Thamizhavel. Nevertheless the

compilation of data, which is strenuous, that has been taken by Mrs. Vasanthidasse, Junior

Engineer, Thiru S. Thiruvengadam, Draughtsman, Thiru M. Sankar, Draughtsman, Ms. G. Kiruthiga,

Draughtsman, Thiru S. Thamizhchezhian, Draughtsman. Mrs. V. Veerasundari Rathna,

Draughtsman, Ms. A.A.T. Jacintha, Draughtsman are to be congratulated for their honest work.

The encouragement, enthusiasm and involvement of all the Superintending Engineers,

Executive Engineers, Architect and all those who have directly and indirectly participated in

bringing out this Schedule of Rates are also acknowledged.

Sl. No Name of Sub-Head Page No.

BASIC RATE

1. Hire Charges of Plants 1

2. Labour 2

3. Materials For Building Work & Services 5

4. Hire Charges, Labour & Materials For Road Work 111

5. Hire Charges, Labour & Materials For Bridge Work 118

6. Carriage 122

BUILDING WORK

2. Earth Work 124

4. Concrete Work 136

5. Reinforced Concrete Work 142

6. Brick Work 154

7. Stone Work 161

8. Marble Work 173

9. Wood Work 177

10. Steel Work 219

11. Flooring 225

12. Roofing 242

13. Finishing 260

14. Repairs to Buildings 271

15. Dismantling & Demolishing 283

16. Miscellaneous Building Works 292

SERVICES

17. Sanitary Installations 297

18. Water Supply 320

19. Drainage 367

20. Pile Work 385

21. Aluminum Work 400

22. Water Proofing 407

23. Horticulture and Landscaping 414

30. Irrigation 419

31. Water Supply (Public Health) 427

C O N T E N T S

Sl. No Name of Sub-Head Page No.

32. Sewerage (Public Health) 575

33. Miscellaneous (Public Health) 597

34. OHT Works 605

35. Subsoil Exploration 607

ROAD WORK (MOST)

4. Granular Sub-Base 611

6. Bituminous Construction 612

7. Culverts 614 ROAD WORK (MORTH)

2. Site Clearance and Dismantling 619

3. Earth Work 628

4. Granular Sub-Base 635

5. Base and Bituminous Construction 649

6. Cement Concrete Pavement 655

8. Traffic Signs, Marking & Other Road Appurtenances 657

9. Pipe Culverts 666

10. Maintenance of Roads 667

11. Horticulture 669

BRIDGE WORK (MORTH)

12. Foundation 673

13. Sub Structure 687

14. Super Structure 693

15. River Training & Protection Works 708

16. Repairs & Rehabilitation 710

CEMENT CONSUMPTION STATEMENT

1. Building Work 712

2. Road work (MOST) 841

3. Road work (MORTH) 844

4. Bridge Work 852

BITUMEN CONSUMPTION STATEMENT (MOST & MORTH)

1. Road Work 887

MAHE REGION

BASIC RATES FOR BUILDINGS WORKS

Sl.No. Code No. Description Unit Rate in Rs.

HIRE CHARGES OF PLANTS

1 0002 Hire charges of Concrete Mixer 0.14 cubic metre Day 1750.00

2 0003 Hire charges of Diesel Road Roller - 8 to 10 tonne Day 3500.00

3 0004 Production cost of concrete by batch mix plant cum 240.00

4 0006 Hire charge of Spraying machine including electric charges Day 207.00

5 0009 Pumping charges of concrete including h/c of pump, piping work accessories etc. cum 96.00

6 0010 H/C of derrick monkey rope day 1200.00

7 0011 H/C of Pump set of capacity 4000 litres/ hour day 1000.00

8 0012 Vibrator (Needle type 40mm) day 1400.00

9 0013 Machine for rubbing of floors day 800.00

10 0017 Hire and running charges of tipper day 4800.00

11 0018 Hire and running charges of loader day 5200.00

12 0019 Hand grinder for mirror polish day 100.00

13 0020 Hydraulic excavator(3D)with driver and fuel day 6800.00

14 0020A Crane hire charges including all operation MT 25.00

15 0024 Hire & running charges of hydraulic piling rig with power unit etc.incl.complete day 28000.00

16 0025 Hire & running charges of light crane day 3200.00

17 0026 Hire & running charges of bentonite pump day 4000.00

18 0027 H/R charges of vibrating pile driving hammer complete power unit & accessories day 28000.00

19 0028 H/R charges of crane 20 tonne capacity day 8000.00

20 0029 H/C for transit mixer cum 400.00

21 0029A H/C for transit mixer (beyond 10km lead) Cum 40.00

Mahe Page 1


22 0037 Mobile crane day 3200.00

23 0038 Tractor with ripper attachment day 3300.00

24 0039 Tractor with trolley day 3100.00

25 0040 Air compressor 250 cfm with two leads for pneumatic cutters/hammers day 2080.00

26 0041 Joint cutting machine with 2-3 blades day 800.00

Note:Above hire charges includes cost of services of operating staff and supply of lubricating oil and fuel charges.

LABOUR

27 0100 Bandhani day 300.00

28 0101 Bhisti day 300.00

29 0102 Blacksmith 1st class day 400.00

30 0103 Blacksmith 2nd class day 350.00

31 0111 Carpenter 1st class day 500.00

32 0112 Carpenter 2nd class day 450.00

33 0113 Chowkidar day 350.00

34 0114 Beldar day 350.00

35 0114A Survey Assistant each 350.00

36 0114B Wooder I class each 400.00

37 0115 Coolie day 250.00

38 0116 Fitter (grade 1) day 500.00

39 0117 Assistant fitter or 2nd class fitter day 450.00

40 0119 Glazier day 350.00

41 0122 Mason (for plaster of paris work) 1st class day 550.00

42 0123 Mason (brick layer) 1st class day 500.00

Mahe Page 2


43 0124 Mason (brick layer) 2nd class day 450.00

44 0125 Mason (for plain stone work) 2nd class) day 450.00

45 0126 Mason ( for ornamental stone work) 1 st class day 600.00

46 0127 Driver ( for Road roller, Concrete mixer , Truck etc.,) day 400.00

47 0128 Mate day 350.00

48 0130 Mistry day 350.00

49 0131 Painter day 400.00

50 0132 Rock Excavator day 400.00

51 0133 Rock Breaker day 400.00

52 0134 Rock driller day 400.00

53 0135 Stone Chiseller day 400.00

54 0139 Skilled Beldar ( for floor rubbing etc.,) day 350.00

55 0141 White washer day 350.00

56 0155 Mason (average) day 475.00

57 0156 Carpenter (average) day 475.00

58 0157 Operator (Pile / Special machine) day 450.00

59 0159 Skilled torch operator for laying tack day 350.00

60 0160 Electrician helper day 350.00

61 0163 Mehanic helper each 350.00

62 0193 Electrician class I(ITI passed with wireman licence from competent authority) day 450.00

63 0191 Mazdoor category III day 250.00

64 0192 Painter class II day 350.00

65 0158 Mechanic (Pile) day 400.00

66 0159 Electrician Class II (ITI passed with licence from Elec.dept) day 400.00

Mahe Page 3


67 0161 Mechanic Grade -I day 450.00

68 0162 Mechanic Grade -II day 400.00

69 0164 Pump driver Grade -I (ITI Passed) day 400.00

70 0165 Sewer Cleaner day 350.00

71 0166 Sweeper day 250.00

72 0167 Thatcher day 350.00

73 0168 Welder Class -I (ITI Passed) day 450.00

74 0169 Welder Class -II day 400.00

75 0170 Well Sinker Class -I day 450.00

76 0171 Well Sinker Class -II day 400.00

77 0172 Technical Assitant Grade -I (B.E.Passed) day 550.00

78 0173 Technical Assitant Grade -II (Diploma passed or B.E.failled) day 500.00

79 0174 Technical Assitant Grade -III (ITI passed or Diploma failled) day 450.00

80 0175 Technical Assitant Grade -IV (ITI failed or having certificate issued by govt.of Puducherry) day 350.00

81 0176 Laboratory Assistant Grade -I (PG in science) day 450.00

82 0177 Laboratory Assistant Grade -II (UG in science) day 400.00

83 0178Laboratory Assistant Grade -III (Degree other than Engg./ Science to work as work inspector , Graduate Junior clerk and work clerk)

day 350.00

84 0179 Raker day 300.00

85 0180 Driver - Light vehicle day 350.00

86 0181 Driver - Heavy vehicle (Lorry , Roller, Tracer) day 400.00

87 0194 Driver - Earth moving equipments day 450.00

88 0182 Cleaner (Heavy vehicles / Roller) day 300.00

89 0183 Watchman Grade-I (Kurkha) day 325.00

90 0184 Watchman Grade-II (Others) day 300.00

Mahe Page 4


91 0185 Drum mixer (Rotary for hot process) day 350.00

92 0186 Helper for Rig day 300.00

93 0200A Driller Grade-I (Pile) day 400.00

94 0200B Driller Grade-II (Pile) day 350.00

95 0200C Mazdoor (Heavy for Pile work) day 350.00

96 0200D Genset Operator day 350.00

97 0200E Site supervisor for pile operation day 500.00

MATERIALS FOR BUILDING WORK

Note: These rates are at site of work and are exclusive of contractors profit , but includes octroi , royalty , sales tax extra

98 0222 Seam bolts and nuts 6mm dia and 25mm long 10nos 30.00

99 0223 Non - asbestos fibre cement corrugated sheet 6mm thick sqm 205.00

100 0224 Non - asbestos fibre cement close fitting adjustable ridge metre 203.00

101 0225 Non - asbestos fibre cement corrugate serrated adjustable ridge metre 174.00

102 0226 Non - asbestos fibre cement plain wing adjustable ridge metre 188.00

103 0227 Non - asbestos fibre cement unserrated adjustable ridge for hips metre 195.00

104 0228 Non - asbestos fibre cement corrugated apron piece metre 126.00

105 0229 Non - asbestos fibre cement eaves filler piece each 93.00

106 0230 Non - asbestos fibre cement north light curves meter 197.00

107 0231 Non - asbestos fibre cement ventilator curves each 267.00

108 0232 Non - asbestos fibre cement barge boards metre 232.00

109 0233 Non - asbestos fibre cement ridge finial pair 84.00

110 0234 Non - asbestos fibre cement special north light curves each 275.00

111 0235 Non - asbestos fibre cement S type louvers each 161.00

112 0236 Non - asbestos multi purpose fibre cement board 6mm thick sqm 180.00

Mahe Page 5


113 0237 Non - asbestos multi purpose fibre cement board 8mm thick sqm 239.00

114 0285 Brick aggregate (Single size) : 63 mm nominal size cum 747.50



117 0291 Stone aggregate (Single size) : 63 mm nominal size cum 1000.00





122 0296 Stone aggregate (Single size) : 12.5 mm nominal size cum 1200.00



125 0300A Casurina posts 80mm dia metre 29.00

126 0300B Casurina posts 100mm dia metre 35.00

127 0300C Casurina posts 125mm dia metre 46.00

128 0302 Safeda ballies 125 mm diameter metre 46.00

129 0302A Casurina posts 100 to 130mm dia metre 41.00

130 0302B Casurina posts 150 mm dia metre 77.00

131 0304 Bajri cum 760.00

132 0305 Bamboo 25mm dia 2.5 metre long score 192.00

133 0308 Bhusa quintal 200.00

134 0309 Paving bitumen S-90 of approved quality tonne 31433.30

135 0310 Bitumen emulsion tonne 30312.90

136 0313 Blown type petroleum bitumen of penetration 85/25 of approved quality tonne 31433.30

Mahe Page 6


137 0314 Bitumen hot sealing compound : grade A Kg 31.43

138 0316 Bitumen solution primer of approved quality litre 30.31

139 0318 Bitumen felt fibre (Vegetable or animal) : type 2 grade 1 sqm 45.00

140 0322 Biutmen felt : type 3 grade 1 sqm 45.00

141 0324 Coal tar litre 31.00

142 0325 Blasting Powder kg 40.00

143 0326 Blasting fuse (fuse wire) each 10.00

144 0328 White face insulating board :12 mm thick sqm 239.00

145 0332 Natural colour insulating board : 12mm thick sqm 175.00

146 0336 Flame retardent face insulating sqm 208.00

147 0339 Flame retardant face insulating,impregnated fibre board 12 mm thick sqm 320.00

148 0341 Flat pressed 3 layer particle board (medium density) grade 1:12 mm thick sqm 360.00

149 0346 Extra veneerede particle board :Teak veneeringononeside & commercialon other sqm 400.00

150 0347 Extra for veneered particle board with : Commercial veneering on both sides sqm 100.00

151 0348 Extra for veneered particle board with: Teak veneering on both sides sqm 540.00

152 0362 Brick bats cum 760.00

153 0367 Portland cement (OPC / PPC - Average) tonne 5450.00

154 0367A Cement (SRPC) tonne 6000.00

155 0368 White cement tonne 19000.00

156 0370 Coal (steam) quintal 1000.00

157 0373 Cramp Gun metal 25x 6x300 mm each 60.00

158 0378 Brass butt hinges (light / ordinarytrype)125x70x4mm 10nos 1300.00

159 0379 Brass butt hinges (light / ordinarytype) 100x70x4mm 10nos 1100.00

160 0380 Brass butt hinges (light / ordinarytype) 75x40x2.5mm 10nos 580.00

Mahe Page 7


161 0381 Brass butt hinges (light / ordinarytype)50x40x2.5mm 10nos 240.00

162 0382 Brass butt hinges (heavy type) 125x85x5.5mm (.70kg) 10nos 2000.00

163 0383 Brass butt hinges (heavy type) 100x85x5.5mm (.56kg) 10nos 1500.00

164 0384 Brass butt hinges (heavy type)75x65x4.0mm (.20kg) 10nos 1200.00

165 0385 Brass parliamentary hinges 150x125x27x5mm 10nos 2242.50



168 0388 Brass parliamentary hinges 75X100X20X3.2mm 10nos 1506.50

169 0389 Brass single acting spring hinges 150 mm each 208.00



172 0392 Brass double acting spring hinges 150 mm each 339.00



175 0400 Brass tower bolt (barrel type) 250x10 mm each 214.00




179 0404 Brass flush bolt 250 mm each 126.00



182 0408 Brass handles 125 mm with plate 175x32 mm each 133.00



Mahe Page 8


185 0411 Brass door latch 300x16x5 mm (0.380 kg) each 169.00

186 0412 Brass door latch 250x16x5 mm (0.350 kg) each 151.00

187 0413 Brass mortice latch and lock 100x65 6levers pair of brass lever handles each 635.00

188 0414 Brass mortice latch and lock 100x65mm pair of brass lever handles each 540.00

189 0417 Brass 150 mm floor door stopper (0.357kg) each 155.00

190 0418 Brass hard drawn hooks and eyes 300 mm 10 Nos 480.00





195 0423 Brass casement window fastener each 41.50

196 0424 Brass casement stays (straight peg type) 300mm weighing not less than 0.33kg each 90.00



199 0427 Brass quadrant stays 300 mm each 77.00

200 0428 Brass fanlight catch 10 nos 275.00

201 0429 Brass fan light pivot 10 nos 370.00

202 0430 Brass chain with hook for fan light catch each 30.00

203 0431 Brass hasps and staples (safety type) 300mm 10 Nos 600.00



206 0438 Brass night latch each 605.00

207 0442 Brass helical spring 150mm each 181.50

208 0444 Brass curtain rod 20mm dia 1.25mm thick metre 108.00

Mahe Page 9


209 0445 Brass curtain rod 25mm dia 1.25mm thick metre 145.00

210 0446 Brass brackets (curtain rods ) 20mm each 35.50

211 0447 Brass cupboard knob or ward robe knob 50 mm each 30.00

212 0449 Brass screws 50 mm 100 Nos 270.00





217 0524 Chromium plated brass butt hinges (heavy) type 75x65x4mm (200gms) 10 Nos 660.00

218 0525 Chromium plated brass butt hinges (light / ordinary) type 125x70x4mm 10 Nos 726.00

219 0526 Chromium plated brass butt hinges (light / ordinary) type 100x70x4mm 10 Nos 605.00

220 0527 Chromium plated brass butt hinges (light / ordinary) type 75x40x2.5mm 10 Nos 297.00

221 0528 Chromium plated brass butt hinges (light / ordinary) type 50x40x2.5mm 10 Nos 242.00

222 0555 Chromium plated brass handles 125mm with plate 175 x 32 mm each 181.50

223 0556 Chromium plated brass handles 100mm with plate 150 x 32 mm each 150.00

224 0557 Chromium plated brass handles 75 mm with plate 125x32 mm each 113.90

225 0558 Chr. plated brass mortice latch&lock100x65mm with6levers&apair brasslever handle each 570.20

226 0568 Chr. plated brass casement window fastener each 71.90

227 0569 Chr. plated brass casement stays(st.peg type)300mm weighing not less than 0.33kg each 115.00



230 0583 Chromium plated Brass night latch each 491.50

231 0584 Chromium plated Brass Wardrobe knob 50mm each 35.00

232 0585 Chromium plated Brass screws 50mm 100nos 230.00

Mahe Page 10






237 0590 Chromium plated brass curtain rod 12mm dia 1.25mm thick metre 133.00



240 0594 Bright finished or black enameled MS butt hinges 125x65x2.12mm 10nos 120.00

241 0595 Bright finished or black enameled MS butt hinges 100x58x1.90mm 10nos 95.00

242 0596 Bright finished or black enameled MS butt hinges 75x47x1.70mmm 10nos 65.00

243 0597 Bright finished or black enameled MS butt hinges 50x37x1.50mmm 10nos 50.00

244 0608 Nickel plated MS piano hinges 1mm tk35mm wide metre 24.00

245 0635 Bright finished or black enameled MS screws 50mm 100 Nos 55.00

246 0637 Bright finished or black enameled MS screws 40mm 100Nos 38.00

247 0638 Bright finished or black enameled MS screws 30mm 100 nos 32.00

248 0639 Bright finished or black enameled MS screws 25mm 100 nos 25.00

249 0640Bright finished or black enameled MS screws 20mm

0mm100 nos 19.00

250 0641 Bright finished or black enameled MS bolts&nuts 50x6mm each 5.00

251 0641R Bright finished or black enamaled powder coating bolts and nuts 50x6mm each 7.00

252 0642 Oxidised MS butt hinges 125x65x2.12mm 10nos 180.00

253 0642R Powder coating butt hinges125x65x2.12mm 10nos 250.00

254 0643 Butt hinges 100x58x1.90mm 10nos 130.00

255 0643R Powder coating butt hinges100x58x1.9mm 10nos 160.00


Mahe Page 11



258 0645R Powder coating butt hinges 50x37x1.50mm 10nos 80.00

259 0646 Oxidised MS parliamentary hinges150x125x27x2.8mm 10nos 400.00

260 0646R Powder coating parliamentary hinges 150x125x27x2.8mm 10nos 1200.00

261 0647 Powder coating parliamentary hinges125x125x27x2.8mm 10nos 310.00


263 0648 Oxidised ms parliamentary hinges100x125x27x2.8mm 10nos 300.00


265 0649 Oxidised ms parliamentary hinges75x100x20x2.24mm 10nos 250.00


267 0650 Oxidised ms single acting spring hinges 150 mm each 75.00

268 0650R Powder coating single spring hinges 150mm each 210.00


270 0651R Powder coating ms single spring hinges 125mm each 180.00


272 0652R Powder coating single acting spring hinges 100mm each 135.00

273 0653 Oxidised ms double acting spring hinges 150 mm each 79.00

274 0653R Powder coating double acting spring hinges 150mm each 210.00





279 0656 Nickel plated ms piano hinges 1mm tk35mmwide metre 41.00

280 0660 Oxidised ms sliding door bolt 300x16mm each 63.00

Mahe Page 12


281 0660R Powder coating sliding door bolt 300x16 mm each 150.00

282 0661 Oxidised ms sliding door bolt 250x16mm each 47.00

283 0661R Powder coating sliding door bolt 250x16 mm each 120.00

284 0662 Oxidised ms door latch 300x20x6mm each 35.00

285 0662R Powder coating door latch 300x20x6mm each 100.00

286 0663 Oxidised ms door latch 250x20x6mm each 30.00

287 0663R Powder coating latch 250x20x6mm each 90.00

288 0664 Oxidised mild steel tower bolt (barrel type) 250X10mm each 42.00

289 0664R Powder coating tower bolt(barrel type) 250x10 mm each 50.00


291 0665R Powder coating tower bolt (barrel type) 200x10mm each 42.50


293 0666R Powder coating tower bolt (barrel type)150x10mm each 35.00


295 0667R Powder coating tower bolt (barrel type) 100x10mm each 30.00

296 0668 Oxidised mild steel handles 125 mm each 24.00

297 0668R Powder coating handles 125mm each 75.00


299 0669R Powder coating handles100mm each 55.00


301 0670R Powder coating handles 75mm each 39.00

302 0679 Oxidised MS hasps and staples (safety type) 150 mm 10 nos 180.00

303 0679R Powder coating hasps and staples (safety type) 150mm 10nos 50.00


Mahe Page 13


305 0680R Powder coating hasps and staples (safety type)115mm 10nos 45.00


307 0681R Powder coating hasps and staples (safety type)90mm 10nos 39.00

308 0682 Oxidised MS screws 50mm 100nos 60.00

309 0682R Powder coating screws 50mm 100nos 120.00

310 0683 Screws 40mm 100nos 51.00








318 0687 Anodised aluminium butt hinges 125x75x4mm 10nos 660.00



321 0690 Anodised aluminium butt hinges 100x63x3.2mm 10nos 475.00





326 0696 Anodised aluminium sliding door bolt 300x16mm each 198.00

327 0697 Anodised aluminium sliding door bolt 250x16mm each 181.00

328 0698 Anodised aluminium tower bolt (barrel type)300x10mm 10nos 840.00

Mahe Page 14


329 0699 Anodised aluminium tower bolt (barrel type) 250x10mm 10nos 780.00




333 0703 Anodised aluminium handles125mm with plate 175 x 32mm 10nos 415.00

334 0704 Anodised aluminium handles100mm with plate 150 x 32mm 10nos 360.00

335 0705 Anodised aluminium handles 75mm with plate 125 x 32mm 10nos 302.50

336 0706 Anodised aluminium handles 50 cm long 100x3.15mm each 125.00

337 0713 Block board construction flush door with teak wood ply on both faces 35mm tk sqm 2700.00



340 0717 Block board construction flush door with commercial ply on both faces 35mm tk sqm 2100.00



343 0723E P/F 20mm thick PVC shutter for doors, windows, cup board etc sqm 2310.00

344 0723F P/F PVC false roofing with Sintex PVC Section sqm 940.00

345 0724 S/F Precast RCC door and window frames sqm 820.00

346 0752 Block board construction flush door lipping sqm-door area 520.00

347 0753 Square vision panel in block board construction flush door sqm-door area 105.00

348 0754 Circular vision panel in block board construction flush door sqm-door area 110.00

349 0755 Decorative type louvers in block board construction flush door sqm-door area 210.00

350 0757 Rebate cutting in block board construction flush door sqm-door area 41.00

351 0759 Decorative plywood 4 mm sqm 657.00

352 0761 Fuel wood quintal 250.00

Mahe Page 15


353 0763 Glue kg 78.00

354 0768 Cement concrete Jali 50mm tk sqm 375.00

355 0769 Cement concrete Jali 40mm tk sqm 300.00

356 0770 Cement concrete jali 25mm tk sqm 250.00

357 0771 Kerosene oil litre 25.00

358 0773 Unslaked lime quintal 300.00

359 0775 White lime quintal 570.00

360 0776 Lime quintal 240.00

361 0777 Dry hydrated lime (factory made) quintal 950.00

362 0784 Marble dust / powder cum 1750.00

363 0785 Marble chips up to 4mm and downsize white&black quintal 130.00

364 0788 Marble chips large size above 4mm white&black quital 130.00

365 0810 Moorum cum 450.00

366 0810A Gravel cum 450.00

367 0811 Mud (dry) cum 15.00

368 0815 Dry distemper kg 60.00

369 0816 Oil bound washable distemper / Acrylic distemper kg 80.00

370 0818 Linseed oil (double boiled) litre 170.00

371 0820 Cement primer litre 120.00

372 0821 Distemper primer litre 120.00

373 0823 Pink primer (for wood) litre 120.00

374 0826 Aluminium paint litre 229.00

375 0827 Acid proof paint (chocolate or black) litre 245.00

376 0828 Anticorrosive bituminous paint (black) litre 140.00

Mahe Page 16


377 0829 Black japan paint litre 130.00

378 0830 Enamel paint litre 170.00

379 0831 Floor enamel paint in all shades except green litre 170.00

380 0833 Synthetic enamel paint in black or chocolate shade litre 170.00

381 0834 Synthetic enamel paint in all shades except black or chocolate shade litre 170.00

382 0835 Plastic emulsion paint litre 240.00

383 0835A Plastic emulsion paint (royal) litre 310.00

384 0835B Plastic emulsion paint (premium) litre 260.00

385 0835C Plastic emulsion paint (commercial) litre 210.00

386 0845 Roofing paint for iron sheets in red colour litre 175.00

387 0846 Set release of Don & Rebol emulsion Fosroc - mixed with 5litres of water litre 195.00

388 0850 White lead kg 75.00

389 0851 Water proofing cement paint kg 45.00

390 0855 Wax polish (ready made) kg 270.00

391 0856 Ordinary varnish litre 150.00

392 0857 Superior copal varnish litre 170.00

393 0858 Superior spar varnish litre 180.00

394 0859 Oil type wood preservative litre 100.00

395 0863 Putty for wood work kg 50.00

396 0865 Pig lead kg 140.00

397 0868 Premixed super white gypsum plaster kg 18.00

398 0869 Plaster of paris kg 12.00

399 0869A Ready made wall putty (JK / BIRLA ) kg 25.00

400 0870 Plug each 15.00

Mahe Page 17


401 0873 Copper pins 6mm dia 7.5cm long each 15.00

402 0874 Black colour dark shade pigment kg 70.00

403 0875 Red,chocolate,orange,buff or yellow (red oxide of iron) light shade pigment kg 100.00

404 0876 Green or blue medium shade pigment kg 90.00

405 0886 Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia each 35.00

406 0966 Sand cast iron plain shoe 150mm dia each 200.00

407 0967 Copper plate kg 200.00

408 0969 Pulley 25 mm dia each 20.00

409 0973 Rolling shutter made of 80x1.25mm machine rolled laths sqm 2050.00

410 0974 Top cover for rolling shutters metre 585.00

411 0975 27.5cm long wire spring grade no 2 for rolling shutters each 400.00

412 0976 Ball bearing for rolling shutters each 400.00

413 0977 Extra for chain & cranked rolling shutters-exceeding 10sqmupto16.80sqmareaofdoor sqm 400.00

414 0978 Extra for chain & cranked rolling shutters-exceeding 16.80sqmarea of door sqm 450.00

415 0979 Cost of earth cum 225.00

416 0979A Quary rubbish cum 390.00

417 0979B Earth for filling (Red earth) cum 400.00

418 0980 Cost of sludge cum 40.00

419 0982 Coarse sand (Zone III) cum 2830.00

420 0983 Fine sand (Zone IV) cum 2830.00

421 0992 Galvanised steel plain sheets quintal 4200.00

422 0992A P/F colour coated galvalume sheet of 550 M.P.A sqm 700.00

423 0993C P/S/F of netlon mesh using 25mm an.al.strip sqm 300.00

424 0994 Standard quality hard board sheet 3mm tk sqm 180.00

Mahe Page 18


425 0996 Standard quality hard board sheet 4.5 mm tk sqm 200.00

426 0999 Shellac litre 215.00

427 1000 Spirit litre 50.00

428 1001 Spun yarn kg 73.00

429 1002 MS round bar 12mm dia and below quintal 4150.00

430 1003 MS round bar above 12mm dia quintal 4150.00

431 1004 Av. rate of MS round bar for reinforcements quintal 4150.00

432 1005 Twisted steel / deformed bars quintal 4150.00

433 1005A Steel-TMT (TISCON / VIZAG / IISCO /SAIL / JSW) quintal 4300.00

434 1005B Steel-TMT (ISI BRAND OF APPROVED MAKE) quintal 4150.00

435 1005C Anticorrosive coating for 20mm to 32mm dia bar tonne 8370.00

436 1005D Anticorrosive coating for 10mm to 16mm dia bar tonne 11790.00

437 1005F Surface preparation and application of two coat of Zinga sqm 1452.60

438 1005G Providing corrosion proof zinga coating 8mm - 32mm dia bars tonne 15000.00

439 1006 Mild steel square bars quintal 4150.00

440 1007 Structural steel such as tees,angles channels and R.S.joists quintal 4376.00

441 1008 Flats upto 10mm in thickness quintal 4376.00

442 1009 Flats exceeding 10mm in thickness quintal 4376.00

443 1010 Mild steel plates quintal 5300.00

444 1013 Mild steel sheets for tanks quintal 4376.00

445 1015 Mild steel expanded metal 20x60 mm strands sqm 300.00

446 1019 Mild steel hooks each 7.00

447 1020 Mild steel rivets quital 5300.00

448 1021 Hard drawn steel wire fabric sqm 350.00

Mahe Page 19


449 1022 GS bolts & nuts 6mm dia & 25mm long round head with slots 10nos 12.00

450 1023 GS J or L hooks 8mm dia 10nos 55.00

451 1024 GS bolts & nuts 6mm dia & 125mm long round head with slots each 12.00

452 1025 MS bolts 6mm dia and 25mm long with hexagonal head 10nos 18.00

453 1028 Straining bolts each 42.00

454 1029 GS barbed wire quintal 8000.00

455 1030 GS turn buckles each 10.00

456 1031 GS bolts & nuts 10mm dia and 27cm long both sides threaded with 4GS nuts each 13.00

457 1032 GS bolts 10mm dia & 7cmlongwith nuts each 9.00

458 1034 Bolts and nuts upto 300 mm in length quintal 5550.00

459 1035 Bolts and nuts above 300 mm in length quintal 5045.00

460 1036 Iron pintels including welded pin each 32.00

461 1037S AISI 316G 50mm S.S.pipe 10mtr or 32.5 or 25kgx400 LS 10000.00

462 1038S 25mm SS pipe 4 cross line 40mtr or 130' or 50kg x400 LS 20000.00

463 1039S Vertical 40mm x10mmx1mtr height 17no.or 55kg x400 LS 22000.00

464 1040S S.S Slant holes over vertical post, each 4 holes , total holes 68nox50.00 LS 3400.00

465 1041S S.S.Base plate of 100mmx100x9mm of each 1 kg,17 pipes or 17kgx300 LS 5100.00

466 1042S S.S.M9 holes over base plate, total 17 plates , 68 holes x40.00 LS 2720.00

467 1043S S.S. M8 Anchor fastener bolt & 60no x50.00 LS 3400.00

468 1044L For10mtr,charges cutting ,TIG welding, mirror polishing inclu.transportationet LS 26648.00

469 10A UNLOADING-100mm dia metre 0.63

470 10B UNLOADING-125mm dia metre 0.84

471 10C UNLOADING-150mm dia metre 1.05

472 10D UNLOADING-200mm dia metre 1.70

Mahe Page 20


473 10E UNLOADING-250mm dia metre 2.42

474 10F UNLOADING-300mm dia metre 2.99

475 10G UNLOADING-350mm dia metre 3.54

476 10H UNLOADING-400mm dia metre 5.71

477 10I UNLOADING-450 to 500mm dia metre 6.98

478 10J UNLOADING-600 to 1000mm dia metre 10.47

479 10K Unloading below 100mm dia metre 0.53

480 1143 Steel beading metre 38.00

481 1145 Aluminium plain strip edging 38x12x3mm metre 85.00

482 1149 Glass strip 4mm thick 40mm deep metre 8.00

483 1154 Through and bond stone 100nos 600.00

484 1157 Stone for masonry work cum 960.00

485 1157A Jetty stone / Armour stone / core stone MT 350.00

486 1158 Stone for pitching 15cm x22.5cm cum 960.00

487 1159 Stone dust cum 390.00

488 1159A Spalls (5 to 50 kg) cum 390.00

489 1160 Red sand stone block cum 4500.00

490 1161 White sand stone block cum 5000.00

491 1163 White sand stone slab 75mm tk (un-dressed) sqm 325.00

492 1164 Red sand stone slab 40mm thick (un-dressed) sqm 170.00

493 1165 White sand stone slab 40mm thick (un-dressed) sqm 270.00

494 1166 Red sand stone slab 45mm and 50 mm thick (un-dressed) sqm 150.00

495 1168 Kota stone slab 20mm to 25mm thick(semi-polished) sqm 400.00

496 1169 Kota stone slab 25mm thick (rough chiseled) sqm 450.00

Mahe Page 21


497 1174 Red sand stone slab 45mm and 50mm thick(un-dressed) sqm 217.00

498 1175 White sand stone slab 45mm and 50mm thick(un-dressed) sqm 240.00

499 1177 Stone grit 6mm and down size or pea sized gravel cum 650.00

500 1179 Crushed stone 2.36mm to 12.5mm size cum 633.33

501 1182 Surkhi Cum 110.00

502 1187 First class teak wood in scantling 10cudm 492.00

503 1189 Second class teak wood in scantling 10cudm 394.00

504 1189B Teak wood in scantling (Burma) cum 150000.00

505 1189M Teak wood in scantling Ist class (Malabar) cum 123602.00

506 1190 Second class teak wood in planks 10cudm 410.00

507 1190B Teak wood in planks (Burma) cum 175000.00

508 1190M Teak wood in planks Ist class (Malabar) cum 130872.00

509 1194 Second class deodar wood in planks 10cudm 335.00

510 1196 First class kail wood in planks 10cudm 186.00

511 1197 Second class kail wood in scantling 10cudm 160.00

512 1197I Country wood in scantling (Irul) cum 52972.00

513 1197J Country wood in scantling (Jack) cum 52972.00

514 1197P Country wood in scantling (Padak) cum 6500.00

515 1197V Country wood in scantling (Vengai) cum 70000.00

516 1198I Country wood in Planks (Irul) cum 56100.00

517 1198J Country wood in Planks (Jack) cum 56100.00

518 1198P Country wood in planks (Padak) cum 75000.00

519 1198V Country wood in planks(Vengai) cum 80000.00

520 1199 Sal wood 10cudm 218.00

Mahe Page 22


521 1201 Precast terrazzo tiles 22mm thick(light shade) sqm 275.00

522 1202 Precast terrazzo tiles 22mm thick(medium shade) sqm 215.00

523 1203 Precast terrazzo tiles 22mm thick(dark shade) sqm 200.00

524 1203A Cement concrete flooring tiles 22mm tk -(Endura/Ultra/Dazzle/Technic) sqm 400.00

525 1207 G.I.limpet washer 100nos 30.00

526 1208 Bitumen washer 100nos 25.00

527 1209 G.I.plain washer thick 100nos 35.00

528 1210 G.I.plain washer thin 100nos 30.00

529 1211 G.I.plain washer for seam bolts 100nos 25.00

530 1213 Water proofing materials kg 35.00

531 1214 Welding by gas plant cm 1.00

532 1215 Welding by electric plant cm 0.80

533 1216 Whiting quintal 620.00

534 1219 Wire nails kg 45.00

535 1220 Wire mesh (rabbit) sqm 65.00

536 1221 20mm dia holding down bolts quintal 4150.00

537 1222 Mild steel sheets with bolts and nuts to rest on pintels each 190.00

538 1224 Hard drawn steel wire quintal 4300.00

539 1225 Mild steel flat strap fitting quintal 4240.00

540 1227 Chequered terrazzo tiles 22mm thick (light shade) sqm 368.00

541 1228 Chequered terrazzo tiles 22mm thick (medium shade) sqm 230.00

542 1229 Chequered terrazzo tiles 22mm thick (dark shade) sqm 218.50

543 1231 Extra for selected planks of second class teakwood 10cudm 72.00

544 1234 Aluminium plain strip edging 57x12x3mm metre 120.00

Mahe Page 23


545 1235 Diesel oil litre 36.74

546 1237 Cutting marble or sand stone slab upto 50mm tk by mechanical device metre 6.00

547 1238 Extra for selected planks of firstclass teakwood 10 cudm 80.00

548 1241 Commercial LPG in cylinder kg 35.00

549 1257C Thermocoal plain sheet - 19mm thick sqm 42.00

550 1301 Bleaching powder quintal 3050.00

551 1304 Surface box for stop cock each 62.00

552 1305 Surface box for sluice valve each 123.00

553 1307 Surface box for water meter each 215.00

554 1309 C.I.bracket for washbasin and sinks pair 57.00

555 1314 C.P.brass chain with 32mm dia rubber plug each 150.00

556 1315 C.P.brass chain with 40mm dia rubber plug each 170.00

557 1330 Clamps and M.S.stays including bolts and nuts for 100mm pipe each 20.00

558 1331 M.S.holder bat clamp of approved design for 100mm S.C.I.pipe each 19.50

559 1332 M.S.holder bat clamp of approved design for 75mm S.C.I.pipe each 9.50



562 1336 Clearing eye with chain and lid 100mm dia each 35.00

563 1337 Clearing eye with chain and lid 150mm dia each 40.00

564 1339 Brass bib -cock 15mm dia each 155.00

565 1340 Brass bib-cock 20mm dia each 180.00

566 1342 Brass stop-cock 15mm dia each 185.00

567 1343 Brass stop-cock 20mm dia each 225.00

568 1350 Mosquito proof coupling of approved design each 38.00

Mahe Page 24


569 1352 C.I.cover and frame 300x300 mm inside each 350.00

570 1353 C.I.cover without frame 300x300mm inside i/c cover of 4.50kg each 300.00

571 1354 Rectangular cover 455x610mm with frame (low duty) each 1050.00

572 1355 Rectangular cover 455x610mm without frame (low duty) each 450.00

573 1356 500mm dia cover with frame (medium duty) each 1600.00

574 1357 500mm dia cover without frame (medium duty) each 1200.00

575 1358 DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less each 6656.00

576 1358A DI manhole cover- 560mm dia circular hinged cover with square frame.( Not less each 7488.00

577 1359 DI Rectangular IC Cover 450x600mm Rectangular Hinged cover with frame.(Not less each 5824.00

578 1360 C.I.mouth,brass ferrule 15 mm dia each 220.00


580 1361A Precast concrete manhole cover- 600mm dia circular cover with frame.( Not less each 2572.50


582 1362A Precast concrete manhole cover- 560mm dia circular cover with frame.( Not less each 2100.00

583 1363 Vitreous china foot rests 250x130x30 mm pair 82.00

584 1363A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not each 2600.00

585 1364 C.I grating 100x100 mm each 15.00

586 1364A Precast concrete rectangular cover 450x600mm Rectangular cover with frame.(Not each 1500.00

587 1365 C.I.grating 150x100mm each 19.00

588 1366 C.I grating 150x150 mm each 25.00

589 1367 C.I.grating 180x180mm each 30.00

590 1369 S.C.I.gully or nahani grating 100mm dia each 13.00

591 1371 Hydrant (FIRE) 2 Kg each 1800.00

592 1371A Hydrant (FIRE) 4.5 Kg each 2600.00

Mahe Page 25


593 1372A 65mm dia (Rubber insertion for flanged pippe joints) each 20.00

594 1372B 80mm dia (Rubber insertion for flanged pippe joints) each 22.00

595 1372C 100mm dia (Rubber insertion for flanged pippe joints) each 24.00

596 1372D 125mm dia (Rubber insertion for flanged pippe joints) each 44.00

597 1372E 150mm dia (Rubber insertion for flanged pippe joints) each 45.00

598 1372F 200mm dia (Rubber insertion for flanged pippe joints) each 66.00

599 1372G 250mm dia (Rubber insertion for flanged pippe joints) each 140.00

600 1372H 300mm dia (Rubber insertion for flanged pippe joints) each 160.00

601 1372I 350mm dia (Rubber insertion for flanged pippe joints) each 280.00

602 1372J 400mm dia (Rubber insertion for flanged pippe joints) each 300.00

603 1372K 450mm dia(Rubber insertion for flanged pippe joints) each 450.00

604 1372L 500mm dia (Rubber insertion for flanged pippe joints) each 600.00

605 1372M 600mm dia (Rubber insertion for flanged pippe joints) each 700.00

606 1372N 700mm dia (Rubber insertion for flanged pippe joints) each 900.00

607 1372O 750mm dia (Rubber insertion for flanged pippe joints) each 1980.00

608 1372P 800mm dia (Rubber insertion for flanged pippe joints) each 2200.00

609 1372Q 900mm dia (Rubber insertion for flanged pippe joints) each 2450.00

610 1372R 1000mm dia (Rubber insertion for flanged pippe joints) each 3200.00

611 1373 Rubber insertions for 80mm dia pipe joints each 20.00

612 1373A 80mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 26.00

613 1373B 100mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 30.16

614 1373C 150mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 39.52

615 1373D 200mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 67.60

616 1373E 250mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 90.48

Mahe Page 26


617 1373F 300mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 116.48

618 1373G 350mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 142.48

619 1373H 400mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 189.28

620 1373I 450mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 223.60

621 1373J 500mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 270.40

622 1373K 600mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 338.00

623 1373L 700mm Dia( Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 416.00

624 1373M 750mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 520.00

625 1373N 800mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 598.00

626 1373O 900mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 650.00

627 1373P 1000mm Dia (Rubber gasket styrene Butadiene Rubber(SBR) IS-5382&12820&ISI mark) each 832.00


629 1374A 80mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 34.32

630 1374B 100mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 37.44

631 1374C 150mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 54.08

632 1374D 200mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 83.20

633 1374E 250mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 116.48

634 1374F 300mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 156.00

635 1374G 350mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 176.80

636 1374H 400mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 245.44

637 1374I 450mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 270.40

638 1374J 500mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 338.00

639 1374K 600mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 468.00

640 1374L 700mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 696.80

Mahe Page 27


641 1374M 750mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 806.00

642 1374N 800mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 881.92

643 1374O 900mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 967.20

644 1374P 1000mm Dia - Rubber gasket EPDM IS-5382, IS -12820 & ISI mark each 1264.64











655 1392 Mirror of superior make glass 60x45cm each 460.00

656 1395 Juteyarn kg 55.00

657 1396 Vitreous china pedestal for wash basin each 920.00

658 1397 Pig lead kg 180.00

659 1398 "L" Clamp 30 cm long (12mm Dia) no 60.00

660 1399 Hire charge for pipe cutting machine day 200.00

661 1400AA Hire charge for pipe grinding machine day 200.00

662 1401 G.I Waste Not Tap -15mm(ALTO/GIFVAL) each 90.00

663 1401A G.I Waste Not Tap -20mm(ALTO/GIFVAL) each 140.00

664 1402 Brass Bib cock-20mm each 120.00

Mahe Page 28


665 1464 S&S.C.I.standard specials upto 300mm dia (heavy class) quintal 5700.00

666 1466 S&S.C.I.standard specials over 300mm dia (heavy class) quintal 5700.00

667 1468 Flanged C.I.standard specials upto 300mm dia (heavy class) quintal 5900.00

668 1470 Flanged C.I.standard specials over 300mm dia (heavy class) quintal 5900.00

669 1472 Casing pipe 100 mm dia metre 480.00

670 1532 Flush pipe with union spreaders and clamps all in C.P.brass for single stall each 250.00

671 1533 Flush pipe with union spreaders and clamps all in C.P.brass for double stall each 425.00

672 1534 Flush pipe with union spreaders and clamps all in C.P.brass forrangof threestall each 515.00

673 1535 Flush pipe with union spreaders and clamps all in C.P.brass forrangof fourstall each 600.00

674 1540 Flush pipe and spreaders G.I.for single set of one squatting plate urinal each 300.00

675 1541 Flush pipe and spreaders G.I.for single set of two squatting plate urinal each 275.00

676 1542 Flush pipe and spreaders G.I.for single set of three squatting plate urinal each 340.00

677 1543 Flush pipe and spreaders G.I.for single set of four squatting plate urinal each 415.00

678 1545 G.I.pipes 15mm dia metre 140.00

679 1545P 15mm dia - G.I. pipe (medium) - IS-1239 (TATA,TNT,NEZONE, APOLLO, ZENITH metre 150.80










Mahe Page 29







694 1555 G.I.back (jam)nuts 25mm dia each 20.00

695 1555A Water meter standard quality (Ataris) each 530.00

696 1559 G.I.back (jam)nuts 65mm dia each 38.00

697 1559A 25 mm X 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 38.00

698 1559AA 150 mm x 80 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

699 1559AB 150 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

700 1559AC 150 mm x 125 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

701 1559B 32 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

702 1559C 32 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

703 1559D 40 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

704 1559D1 40 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

705 1559E 40 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 63.00

706 1559F 50 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

707 1559F1 50 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

708 1559G 50 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

709 1559H 50 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

710 1559I 65 mm x 20 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

711 1559I1 65 mm x 25 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

712 1559J 65 mm x 32 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

Mahe Page 30


713 1559K 65 mm x 40 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

714 1559L 65 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

715 1559M 80 mm x 32 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

716 1559N 80 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

717 1559O 80 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

718 1559P 80 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

719 1559Q 100 mm x 40 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

720 1559R 100 mm x 50 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

721 1559S 100 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

722 1559T 100 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 344.00

723 1559U 125 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

724 1559V 125 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

725 1559W 125 mm x 80 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

726 1559X 125 mm x 100 mm dia-GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1310.00

727 1559Y 150 mm x 50 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

728 1559Z 150 mm x 65 mm dia -GI reducer - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1770.00

729 1560 15 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 25.00

730 1560A 20 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 33.00

731 1560B 25 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

732 1560C 32 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 67.00

733 1560D 40 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

734 1560E 50 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

735 1560F 65 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 231.00

736 1560G 80 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 308.00

Mahe Page 31


737 1560H 100 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 567.00

738 1560I 125 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1910.00

739 1560J 150 mm dia - GI ELBOW - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2325.00

740 1561A 25 mm X 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

741 1561AA 150 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2375.00

742 1561AB 150 mm x 100mm dia-GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2380.00

743 1561AC 150 mm x 125mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2390.00

744 1561B 32 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 68.00

745 1561C 32 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 68.00

746 1561D 40 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

747 1561D1 40 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

748 1561E 40 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 89.00

749 1561F 50 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

750 1561F1 50 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

751 1561G 50 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

752 1561H 50 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 126.00

753 1561I 65 mm x 20 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

754 1561I1 65 mm x 25 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

755 1561J 65 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

756 1561K 65 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

757 1561L 65 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 241.00

758 1561M 80 mm x 32 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

759 1561N 80 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

760 1561O 80 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

Mahe Page 32


761 1561P 80 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 318.00

762 1561Q 100 mm x 40 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

763 1561R 100 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

764 1561S 100 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

765 1561T 100 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 577.00

766 1561U 125 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1896.00

767 1561V 125 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1910.00

768 1561W 125 mm x 80 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1950.00

769 1561X 125 mm x 100mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1950.00

770 1561Y 150 mm x 50 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2365.00

771 1561Z 150 mm x 65 mm dia -GI red.elb.- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 2370.00

772 1562A 15mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 26.50

773 1562B 20mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 34.00

774 1562C 25mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 46.00

775 1562D 32mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 69.00

776 1562E 40mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 82.00

777 1562F 50mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 118.00

778 1562G 65mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 218.00

779 1562H 80mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 350.00

780 1562I 100mm - GI HexNipple- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 590.00

781 1563A 15mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

782 1563B 20mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 50.00

783 1563C 25mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 70.00

784 1563D 32mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 85.00

Mahe Page 33


785 1563E 40mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

786 1563F 50mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 175.00

787 1563G 65mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 255.00

788 1563H 80mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 390.00

789 1563I 100mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 690.00

790 1563J 125mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1100.00

791 1563K 150mm - GI Bend- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1600.00

792 1564A 15mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 24.00

793 1564B 20mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 31.00

794 1564C 25mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 37.00

795 1564D 32mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 51.00

796 1564E 40mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 62.00

797 1564F 50mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 91.00

798 1564G 65mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 150.00

799 1564H 80mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 222.00

800 1564I 100mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 354.00

801 1564J 125mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1400.00

802 1564K 150mm - GI Coupling- IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 1800.00

803 1565A 15 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 15.00

804 1565B 20 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 20.00

805 1565C 25 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 25.00

806 1565D 32 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 30.00

807 1565E 40 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

808 1565F 50 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 50.00

Mahe Page 34


809 1565G 65 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 70.00

810 1565H 80 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 85.00

811 1565I 100 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 110.00

812 1565J 125 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 210.00

813 1565K 150 mm - GI Plug - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 350.00

814 1566A 15mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 15.00

815 1566B 20mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 20.00

816 1566C 25mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 28.00

817 1566D 32mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 35.00

818 1566E 40mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 45.00

819 1566F 50mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 55.00

820 1566G 65mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 80.00

821 1566H 80mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 95.00

822 1566I 100mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 120.00

823 1566J 125mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 235.00

824 1566K 150mm - GI Cap - IS-1239 part 2 (UNIQUE/RBRAND/HPBRAND/UI BRAND) each 335.00

825 1567A 15 mm dia - GI Pipe Nipple 10cm long each 27.00

826 1567B 20 mm dia - GI Pipe Nipple 10cm long each 31.00

827 1567B1 25 mm dia - GI Pipe Nipple 10cm long each 41.00

828 1567C 32

GOVERNMENT OF PUDUCHERRY PUBLIC WORKS DEPARTMENT PSR 2010_11_Book.pdf · labour component. 9.2...

Documents

Transcript of GOVERNMENT OF PUDUCHERRY PUBLIC WORKS DEPARTMENT PSR 2010_11_Book.pdf · labour component. 9.2...