Goat longboards 2014 2015

Mounting options.

Flex.

The Zero1 model is built from a 10mm sandwich of bamboo and two layers of fiberglass finished off with customized grip tape. This combination offers flex ideal for steezy handling when carving.

The lateral concave holds your feet allowing you to quickly get into position when you come back from tricks. The sweet camber makes it a very comfor-table skate.

Zero 1Flex reactive for carving and fun.

- Drop Trought: This version, with a lower centre of gravity offers greater stability and more comfortable rides.

The Zero1 model is only made in one flex. We offer a board flex that together with a generous camber with swift recovery allows for easy carving and bombing without losing stability, to ease out the rides.

Technical details

40”

Composition1 VERT - LAM BAMBOO VENEER

2 LAYERS OF FIBERGLASS

CUSTOMIZED GRIP TAPE

Dimensions and build.

DimensionsLENGHT 102 cm

9”WIDTH 23 cm

29,8”WHEEL BASE 75 cm

-WEIGHT 1,7 kg

-THICKNESS 10 mm

Wheel base 75cm / 29,8”

102cm / 40”

Drop Throught

Mounting options.

The Elude model is built from a 10mm sandwich of bamboo and two layers of fiberglass finished off with customized grip tape. It offers a light flex. The kicktails open the door to tricks on the flat and the concave grips your feet to the board when doing the tricks.

A suitable level of stiffness that makes it a perfect option for freeriders.

EludeSqueeze out your best tricks.

- Drop Trought: This version, with a lower centre of gravity offers greater stability and more comfort on longer rides.

- Hard flex: Tworks well for weights from 70-75kg up to 100kg.

Flex.

- Top Mount: With the deck mounted over the axel we get a tougher board for the tricks and drifts. The tail zone is freer for deck maneuvering too.

- Soft flex: works well for weights from 40kg up to 75-80kg.

The Elude model comes in two flex options; Hard Flex (for medium to heavy riders) and Soft Flex (for low to medium weight).

Two versions of rigidity to offer a board adapted to different riders. By opting for a weight-adjusted configuration that takes the rider’s style into ac-count, we achieve a board that’s highly responsive in each move and comfortable to ride around on.


Dimensions CompositionLENGHT 1 VERT - LAM BAMBOO VENEER103 cm 40,5”

2 LAYERS OF FIBERGLASSWIDTH 23 cm 9”

CUSTOMIZED GRIP TAPEWHEEL BASE 71 cm 27,9”

WEIGHT (SOFT) 1,4 kg -

WEIGHT (HARD) 1,65 kg -

10 mmTHICKNESS -

Wheel base 71mm / 27,9”

103mm / 40,5”

Top Mount Drop Throught

Technical details

Mounting options.

Flex.

The Uzume model has been developed together with our rider Rafa Ordovás. Over a year of prototypes before arriving in the home straight. A board de-signed for Dancing built from a 10 mm sandwich with a core of bamboo, two layers of fiberglass and personalized grip tape.

With a uniform flex and concave along the board. With roomy kicktails for easy tricks. The Uzume also has a light rocker between the axels.

Fancy taking her out for a dance?

UzumeThe dancing Goat.

- Top Mount: The trucks area is flat and it allows a perfect settlement of the trucks and a good action on the kicktails when you make your tricks.

The Uzume is built in a single flex designed to be uniform across the whole surface between the axels and stiffer in the kicktails.


Dimensions CompositionLENGHT 1 VERT - LAM BAMBOO VENEER120 cm 47, 1/4”

2 LAYERS OF FIBERGLASSWIDTH 23,5 cm 9,1/4”

CUSTOMIZED GRIP TAPEWHEEL BASE 80 cm 31,1/2”

WEIGHT 2,4 kg -

THICKNESS 10 mm -


120cm / 47,2”

23,5

cm /

9,25

”

Top Mount

Technical details

Mounting options.

Stiffness.

The Thor model is designed by Guillermo Larumbe, a member of our compe-tition team. It’s designed for downhill and made from two layers of bamboo sandwiched between two layers of fiberglass.

It comes with a light rocker and W concave that allow it to maintain stability at high speed. The top mount gives easy handling and cuts out wheel bite with its generous wheel wells. The distance between the axels makes it a stable board on fast curves.

A complete board for downhill, competition and hard freeride.

ThorThe top mount for more technical styles of riding.

- Top Mount: With the deck mounted over the axel we get an aggressive set up with a high centre of gravity and direct control with the feet over the axel.

The Thor is built from a sandwich of bamboo ve-neers compressed with epoxy resin and technical fiberglass that give it the necessary rigidity for a great response from the board combining speed and precision.


Dimensions Composition2 VERT - LAM BAMBOO VENEERLARGO 95 cm 37,4”

2 LAYERS OF FIBERGLASSWIDTH 25 cm 9,8”

WITHOUT GRIP TAPEWHEEL BASE 69 cm / 73,5 cm 27 / 28,9”

WEIGHT 2,1 kg -

THICKNESS 12,5 mm -

Wheel base 69cm - 73,5cm / 27” - 28,9”Wheel base 69cm - 73,5cm / 27” - 28,9”

95cm / 37,4”

Top Mount

Technical details

Mounting options.

Stiffness.

The Thor Hammer has evolved from the Thor, developed together with Orma, Monty Ponty and Pablo Quiles. We’ve maintained the core features of the Thor, a light rocker and W concave empha-sising the concave at the nose and tail for better feet positioning on the deck and helping to avoid wheel bite. We’ve also changed the cut on the nose to allow more surface contact with the deck. But the main change with the Thor Hammer is the dimensions, shorter and compact with various mounting options which go from a 58 to 66 cm wheel bas.

A fast downhill board but also agile and adaptable for the toughest freeride.

La Thor Hammer hits hard.

Thor HammerRediscover your spots.

- Top Mount: With many options to place your setup and maximize board control both free-ride and downhill.

The Thor Hammer is made from a sandwich of two vert-lam bamboo veneers combined with technical fiberglass and epoxy resin which gives it the necessary stiffness for ease of handling, combining both speed and precision.


Dimensions Composition2 VERT - LAM BAMBOO VENEERLENGHT 84 cm 33”


WITHOUT GRIP TAPEWHEEL BASE 58 cm / 66 cm 22,3 / 4 to 26”

WEIGHT 2 kg -

THICKNESS 12,5 mm -

84cm / 33”

Wheel base 58cm - 66cm / 22,8” - 26”

24,2

cm /

9,5”

Top Mount

Technical details

Mounting options.

Stiffness.

The Mechanic model is designed by Iván Dávila, a member of our competition team. A deck made from a sand-wich of 3 layers of vert bamboo with fiberglass and epoxy. It’s a board that we’ve tested for over than a year and participated with at numerous events and competitions – with great results.

A top mount but with a 20 mm drop deck creates a spacious foot grip zone for stability on high speed corners. The progressive W concave reaches 3mm at the rear of the board to give a good grip in slides and fast moves.

It’s also got different wheel base set ups to allow adjustments for the slope.

A board giving high stability at speed.

MechanicTechnique and precision for downhill.

- Top Mount: The Mechanic is a top mount board with a drop through deck creating a foot grip zone with the concaves to give extra foot stability at high speeds and in slides.

The Mechanic is made from a sandwich of compres-sed bamboo, technical fiberglass and epoxy resin which gives it the necessary stiffness for ease of hand-ling, combining both speed and precision.


Dimensions Composition3 VERT - LAM BAMBOO VENEERLENGHT 92 cm 36,2”


WITHOUT GRIP TAPEWHEEL BASE 69 / 71,6 / 73,5 cm 27 / 27,9 / 28,7”

WEIGHT 1,9 kg -

THICKNESS 12 mm -

Wheel base 69 - 71,6 - 73,5cm / 27” - 27,9” - 28,7”

92cm / 36,2”

Top Mount

Technical details

Mounting options.

Stiffness.

The Basati model is designed by Pablo Quiles, a member of our competition team. A board made from 3 vert-lam bamboo veneers with fiberglass and epoxy.

Its aggressive shape makes a board that’s highly responsive to foot movements. Although it’s a top mount, the deck has a light drop which makes the feet and centre of gravity more stable over the axel, and the lengthening of the concave over the axel zone gives extra foot space for more precise handling. The sharper concaves and the W concave guarantee a good grip at high speed and in the most demanding slides.

A technical board to get the most out of the most extreme slides.

BasatiWild curves for wild slopes.

- Top Mount: Although the deck is mounted over the axel, the Basati also has a light drop in the foot platform and some concaves that reach the axel, giving the board more stabi-lity and control in high speed cornering and slides.

The Basati is made from a sandwich of compressed bamboo , technical fiberglass and epoxy resin which gives it the necessary level of stiffness for a highly res-ponsive board, combining both speed and precision.



2 LAYERS OF FIBERGLASSWIDTH 23,5 cm 9”

WITHOUT GRIP TAPEWHEEL BASE 67 / 70 cm 26,3 / 27,5”

WEIGHT 1,8 kg -

THICKNESS 12 mm -

Wheel base 67-70cm / 26,3”-27,5”

88cm / 34,6”

Top Mount

Technical details

The Surge model is built from two bamboo veneers sandwiched between two layers of fiberglass, obtaining a stiff deck that withstands torsion at high speed. It’s also got a W concave to grip the feet better in the harder moves in downhill and freeride.

Both drop through and top mount models are available for different sensations. The first offers a feeling of greater stability in the turn. Against that, the top mount has a lighter turn and a more stable feel when cornering.

Perfect for long corner sessions with unlimited drifts.

SurgeSymmetry for freerides and corner sessions.

Mounting options.

- Drop Trought: This version with a lower centre of gravity offers greater stability for starting out in freeride and more comfort underfoot for cruising.

Stiffness.

- Top Mount: With the deck mounted over the axel we obtain a set up that’s a bit more aggressive and responsive on corners and drifts.

The Surge is built from a sandwich of bamboo ve-neers compressed with epoxy resin and technical fiberglass that give it the necessary rigidity for a great response from the board combining speed and precision.


Dimensions Composition2 VERT - LAM BAMBOO VENEERLENGHT 94 cm 37”


WITHOUT GRIP TAPEWHEEL BASE 72 cm 28,5”

WEIGHT (TOP) 2 kg -

WEIGHT (DROP) 1,9 kg -

12,5 mmTHICKNESS -


94cm / 37”


Technical details

The CrazyIvan model is designed by Iván Dávila, a member of our race team. It’s a board designed for downhill and made from a sandwich of three layers of bamboo and two of fiberglass, managing to eliminate the torsion in fast curves.

The cut is designed to eliminate wheelbite. With the concaves,it’s got an aggressive W although it allows you to place your foot against the drop seeing as the central W is a few centimeters back. The side W embeds toe and heal, offering a rapid response and a sense of stability. The distance between the axles also helps to reduce speed wobbles.

CrazyIvanHard ruthless drifts.

Mounting options.

- Drop Trought: This version has a lower centre of gravity offering greater stability and comfort espe-cially on your first drifts.

Stiffness.

- Top Mount: With the deck mounted over the axel we obtain a set up that’s a bit more aggressive and responsive on corners and drifts.

The CrazyIvan is built from a sandwich of bamboo veneers compressed with epoxy resin and techni-cal fiberglass that give it the necessary rigidity for a great response from the board combining speed and precision.




WITHOUT GRIP TAPEWHEEL BASE 77,7 cm 30,6”

WEIGHT (TOP) 2,2 kg -

WEIGHT (DROP) 2,1 kg -

12,7 mmTHICKNESS -


Wheel base 77,7cm / 30,6”

93cm / 36,6”

Technical details

Made in Europe.Each and every step of the production process is carried out in our factory in Navarra, Spain. This allows us to oversee the whole process from start to finish. Idea generation, conceptualization to the end of the production cycle.

How it all started.It all started in 2011 with the aim of making longboards and since then we’ve been de-veloping a methodical production process of laminating bamboo.

Quality control.All our boards are stamped with a serial number allowing us to track and monitor its progress from manufacture through to the end of the life cycle.

WWW.GOATLONGBOARDS.COM

Goat longboards 2014 2015

Documents

Transcript of Goat longboards 2014 2015