GLUEPUMPS - pneumatikkatalog.de · 6 Technical and visual modi cations are reserved. PUMPS The...
Transcript of GLUEPUMPS - pneumatikkatalog.de · 6 Technical and visual modi cations are reserved. PUMPS The...
2 Technical and visual modifications are reserved.
PUMPS
Research &Development
Engineering &Design
Prototyping Manufacturing of Vacuum Lifting Devices
Construction of Jigs & Fixtures
Mechanical Production
Timmer GmbH is your reliable partner in the area of pneumatics, vacuum technology as well as pumping and dosing tech-nology. With more than 140 employees, we develop, manufacture and sell an extensive array of products at two factories - ranging from custom-specific solutions through to technical accessories. In short: we offer you everything you need in your daily practice. Our products are known under the brand names Timmer und TIVAtec all over the world.
Administration
M O R E T H A N 4 0 Y E A R S
Purchasing & Sales Warehouse & Logistics
Manufacturing of Pumps
Manufacturing of Cylinders
Manufacturing of Customised Solutions
HEADQUARTERS – 20.000 m²
PUMPS
3Technical and visual modifications are reserved.
PREMIUM-Pneumatic Glue Pumps Overview
Type Version Protection Class Page
PTI-D3-H-400 With integrated heating IP66 4
PTI-D3-O-400 Without heating IP66 8
PTI-D3-H-Cont-400 With integrated heating IP66 12
BRANCH – 6.000 m²
4 Technical and visual modifications are reserved.
PUMPS
IP66
PTI-D3-H-400
With integrated heating
www.timmer-pumps.com/en/ glue-pumps
Pneumatic Glue Pump with Heating for High- and Low-Viscous Media
Suction valve
Glue inlet
Heating
Glue outlet
PUMPS
5Technical and visual modifications are reserved.
PREMIUM-Pneumatic Glue Pump with heating PTI-D3-H-400
Order no. Type Version Power Supply Protection class
54005000 PTI-D3-H-400 With integrated heating Shock-proof plug IP66
54005011 PTI-D3-H-400 With integrated heating CEE Euro plug IP66
54005012 PTI-D3-H-400 With integrated heating Procon plug IP66
www.timmer-pumps.com/en/glue-pumps-service/
184
742
285
125
297
135
Pneumatic Glue Pump with Heating for High- and Low-Viscous Media
Technical drawing:All dimensions in mm
6 Technical and visual modifications are reserved.
PUMPS
The Timmer glue pump is a pneumati-cally driven piston pump with integrated heating and electronic control, which delivers glue in both stroke movements.
The stroke frequency (max. 2 Hz) can be shown on the display.As soon as the pump is started pneu-matically, the glue conveying starts via
suction and pressure valves. The deliv-ery rate of the medium is adjusted with a valve in the exhaust air.
Technical Data
DriveDrive principleSuction heightTransmissionOutput (with water)
Temperature of mediumViscosity of pumped mediumLow pulsation
Connection - Suction sideConnection - Pressure sideWeightStroke speed
: : : : : : : : : : ::
pneumaticself-priming2 m of water column (20 °C)3.8 to 1max. 33 cm³ per double stroke (4 l/min. / 240 l/h at 2 Hz)max. 50 °C – electronically adjustablemax. 100.000 mPasmedium conveying both during suction and pressure movementsuction pipe (standard length 420 mm)hose nozzle, 19 mm6.9 kgmax. 2 Hz
Material
Housing cover Housing baseHousing of suction baseValve balls, fluidRiser pipePiston rodHeatingTie rods (2 pieces)Nozzle (19 mm)HandleO-rings of suction- and pressure valves
: : : : : : : : : : :
ABSPOMStainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel FKM
Programming Options
• Temperature display C°/ F• Preselection media temperature• Stroke counting display• Stroke frequency• NFC: data readout via
android smartphone or tablet• Display of maintenance intervals
Advantages of the Glue Pump Series D3
• Easy setting of the glue temperature via display• Reproducible setting of the delivery rate• Integrated maintenance indicator• Excellent cleaning and flushing behavior
(reduction of dead spaces)
• Waterproof according to IP66• Material-friendly heating behavior• Integrated electronic control• Low compressed air consumption
and reduced power consumption
Pneumatic Glue Pump with Heating for High- and Low-Viscous Media
PUMPS
7Technical and visual modifications are reserved.
Electrical Data - Glue Pump with Heating
Electrical connection (110 V - version on request)Power consumptionPower supply lead (shock-proof plug) - others on requestTemperature control unitTemperature rangeTemperature settingProtection classSPS interface
: : : : : : ::
200 - 240 V, 50/60 Hz
approx. 950 W by max. heating output2 m rubber-insulated cable
electronicadjustable up to +50 °Cvia display & keypad / Timmer AppIP66optional
Pneumatic data
Compressed air connectionOperating pressureCompressed air consumptionActuator
: : : :
plug-in nipple 7.2 NW3 - 6 bar filtered compressed airmax. 170 l/min at max. output5/2 way valve, electric
Fluids
The pump is suitable for conveying various fluids (media).Material resistance has to be examined on a case-by-case basis.
We will be pleased to give you advice about the suitability in your specific application.
T2 media output
T1 media inlet
0:10 0:20 0:30 0:40 0:50 1:00 1:10 1:20 1:30 1:40 1:50 2:00
time (h)
20
25
30
35
40
15
tem
pera
ture
(°C
)
Regelverhalten Timmer D3, Wasser, 0,5 HzControl Performance Timmer D3, water, 0.5 Hz
Pneumatic Glue Pump with Heating for High- and Low-Viscous Media
8 Technical and visual modifications are reserved.
PUMPS
IP66
PTI-D3-O-400
Without heating
www.timmer-pumps.com/en/ glue-pumps
Pneumatic Glue Pump without Heating for High- and Low-Viscous Media
PUMPS
9Technical and visual modifications are reserved.
PREMIUM-Pneumatic Glue Pump without heating PTI-D3-O-400
Order no. Type Version Power Supply Protection class
54005200 PTI-D3-O-400 Without heating Standard, pneumatic IP66
184
742
285
125
297
135
www.timmer-pumps.com/en/glue-pumps-service/
Pneumatic Glue Pump without Heating for High- and Low-Viscous Media
Technical drawing:All dimensions in mm
10 Technical and visual modifications are reserved.
PUMPS
This version is used if an additional heating of the medium is not required.
The flow rate of the medium is adjusted with a valve in the exhaust air.
Advantages of the Glue Pump Series D3
• Waterproof according to IP66• Excellent cleaning and flushing behavior (reduction of dead spaces)• Low compressed air consumption
Technical Data
DriveDrive principleSuction heightTransmissionOutput (with water)
Viscosity of pumped mediumLow pulsation
Connection - Suction sideConnection - Pressure sideWeightStroke speed
: : : : : : : : : ::
pneumaticself-priming2 m of water column (20 °C)3,8 to 1max. 33 cm³ per double stroke (4 l/min. / 240 l/h at 2 Hz)max. 100.000 mPasmedium conveying both during suction and pressure movementsuction pipe (standard length 420 mm)hose nozzle, 19 mm6,9 kgmax. 2 Hz
Pneumatic Glue Pump without Heating for High- and Low-Viscous Media
PUMPS
11Technical and visual modifications are reserved.
Pneumatic Data
Compressed air connectionOperating pressureCompressed air consumptionActuator
: : : :
plug-in nipple 7.2 NW3 - 6 bar filtered compressed airmax. 170 l/min at max. output pneumatic / oscillating
Fluids
The pump is suitable for conveying various fluids (media).Material resistance has to be examined on a case-by-case basis.
We will be pleased to give you advice about the suitability in your specific application.
Material
Housing cover Housing baseHousing of suction baseValve balls, fluidRiser pipePiston rodHeatingTie rods (2 pieces)Nozzle (19 mm)HandleO-rings of suction- and pressure valves
: : : : : : : : : : :
ABSPOMStainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel FKM
Pneumatic Glue Pump without Heating for High- and Low-Viscous Media
12 Technical and visual modifications are reserved.
PUMPS
IP66
PTI-D3-H-Cont-400
With integrated heating
www.timmer-pumps.com/en/ glue-pumps
Pneumatic Container Glue Pump with Heating for High- and Low-Viscous Media
PUMPS
13Technical and visual modifications are reserved.
PREMIUM-Pneumatic Container Glue Pump with Heating PTI-D3-H-Cont-400
Order no. Type Version Power Supply Protection class
54005400 PTI-D3-H-Cont-400 With integrated heating Shock-proof plug IP66
184
1422
285
125
1002
135
www.timmer-pumps.com/en/glue-pumps-service/
Pneumatic Container Glue Pump with Heating for High- and Low-Viscous Media
Technical drawing:All dimensions in mm
14 Technical and visual modifications are reserved.
PUMPS
The Timmer container glue pump corresponds to the glue pump with heating, but is equipped with an extra long suction pipe for conveying glue
out of IBC containers.The number of strokes to be set via the integrated stroke counter determines the quantity of glue to be conveyed.
When the set number of strokes is reached, the pump switches to stop.
Electrical Data - Container Glue Pump with Heating
Electrical connection (110 V - version on request)Power consumptionPower supply lead (shock-proof plug) - others on requestTemperature control unitTemperature rangeTemperature settingProtection classSPS interface
: : : : : : ::
200 - 240 V, 50/60 Hz
approx. 950 W by max. heating output2 m rubber-insulated cable
electronicadjustable up to +50 °Cvia display & keypad / Timmer AppIP66optional
Programming Options
• Temperature display C°/ F• Preselection media temperature• Stroke counting display• Stroke frequency• NFC: data readout via
android smartphone or tablet• Display of maintenance intervals
Pump Connection
The connections refer to all pneumatic glue pumps with heating from Timmer.
Glue outlet
Electrical cable
Compressed air connec-tion with plug-in nipple
Additional compressed air connection e.g. for maintenance unit
Glue inlet
Pneumatic Container Glue Pump with Heating for High- and Low-Viscous Media
PUMPS
15Technical and visual modifications are reserved.
Pneumatic Data
Compressed air connectionOperating pressureCompressed air consumptionActuator
: : : :
plug-in nipple 7.2 NW3 - 6 bar filtered compressed airmax. 170 l/min at max. output5/2 way valve, electric
Fluids
The pump is suitable for conveying various fluids (media).Material resistance has to be examined on a case-by-case basis.
We will be pleased to give you advice about the suitability in your specific application.
Technical Data
DriveDrive principleSuction heightTransmissionOutput (with water)
Temperature of mediumViscosity of pumped mediumLow pulsation
Connection - Suction sideConnection - Pressure sideWeightStroke speed
: : : : : : : : : : ::
pneumaticself-priming2 m of water column (20 °C)3.8 to 1max. 33 cm³ per double stroke (4 l/min. / 240 l/h at 2 Hz)max. 50 °C – electronically adjustablemax. 100.000 mPasmedium conveying both during suction and pressure movementsuction pipe, 1000mmhose nozzle, 19 mm11.5 kg max. 2 Hz
Material
Housing cover Housing baseHousing of suction baseValve balls, fluidRiser pipePiston rodHeatingTie rods (2 pieces)Nozzle (19 mm)HandleO-rings of suction- and pressure valves
: : : : : : : : : : :
ABSPOMStainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel FKM
Pneumatic Container Glue Pump with Heating for High- and Low-Viscous Media
16 Technical and visual modifications are reserved.
PUMPS
Glue funnel and glue lid for the Glue Pump D3 (kit)
Order no. Type Scope of supply
59010020 PTI-D3-ZUB-glue lid-kit Glue funnel with bayonet fitting POM, double sieve Aisi, glue lid Aisi
Glue lid for the Glue Pump D3
Order no. Type Scope of supply
59010018 PTI-D3-ZUB-glue lid-stainless steel Glue lid stainless steel
Glue funnel with double sieve for the Glue Pump D3
Order no. Type Scope of supply
59010019 PTI-D3-glue funnel kit Glue funnel POM, double sieve stainless steel
Mounting clamp ring for height adjustment of the Glue Pump D3
Order no. Type Scope of supply
55002010 PTI-D3-ZUB-Mounting clamp ring Clamp ring with bayonet fitting POM, screws stainless steel
Accessories for PTI-D3-H-400 and PTI-D3-H-Cont-400 (optional)
+
PUMPS
17Technical and visual modifications are reserved.
Euro plug (CEE plug)
Order no. Type Scope of supply
52020071 PTI-D2-ZUB-CEE-plug CEE plug 3x16 A, 220 V with cable pre-assembled kink protection
Procon plug
Order no. Type Scope of supply
52020070 PTI-D2-ZUB-Procon plug Procon plug
Compressed air connection with hose
Order no. Type Hose length Hose ø inside Hose ø outside
54000191 PTI-D3-ZUB-compressed air connection-2m 2 m 6 mm 12 mm
54000192 PTI-D3-ZUB-compressed air connection-5m 5 m 6 mm 12 mm
Scope of supply: Pressure regulator ¼“, PVC hose 12/6, mini ball valve with nozzle 6 ¼“, completely assembled
Conveying hose PVC
Order no. Type Hose length Hose ø inside Hose ø outside
52020073 PTI-D2-ZUB-conveying hose-2M 2 m 19 mm 27 mm
52020068 PTI-D2-ZUB-conveying hose-5M 5 m 19 mm 27 mm
Scope of supply: Conveying hose PVC, incl. hose clamp
Accessories for PTI-D3-H-400 and PTI-D3-H-Cont-400 (optional)
19Technical and visual modifications are reserved.
www.pneumatikshop.dewww.pneumatikkatalog.de
PLEASE
VISIT OUR
ONLIINE-
SHOP
FIND MORE
ACCESSORIES
IN OUR
CATALOGS
WE ARE REPRESENTED INTERNATIONALLY:
9999
9940
EN
/04/
2019
© T
imm
er G
mb
H
Timmer GmbH Dieselstraße 37, D-48485 Neuenkirchen Tel.: +49 (0)5973 9493 0 Fax: +49 (0)5973 9493 90 [email protected]
Visit us on:
Timmer TV
Goo
gle
Play
and
the
Goo
gle
Play
logo
are
trad
emar
ks o
f Goo
gle
LLC
Zertifikat
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'.
Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the
relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Ausgestellt von: Lloyd's Register Deutschland GmbH, Adolf-Grimme-Allee 3 50829 Köln Germany
Für und im Auftrag von:1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
Hiermit wird bescheinigt, dass das Managementsystem von:
TIMMER GMBH
Dieselstr. 37 48485 Neuenkirchen Deutschland
durch Lloyd's Register Quality Assurance geprüft und bewertet wurde und den folgenden Normen entspricht:
ISO 9001:2015
P.G. Cornelissen
Ausgestellt von: Lloyd's Register Deutschland GmbH Für und im Auftrag von: Lloyd's Register Quality Assurance
Ltd
Bestehendes Zertifikat: 21 Februar 2017Erstmalige Zulassung:
Dieses Zertifikat ist gültig bis: 20 Februar 2020ISO 9001 21 Februar 2005
Zertifikats-Identitäts-Nr.: 10011576
Gültigkeits-Nr.: ISO 9001 – 0026373
Das Managementsystem ist anwendbar für:
Entwicklung, Herstellung und Vertrieb von Pumpen, pneumatischen und elektrischen Komponenten und
Vakuumhebeanlagen.
Certificate of Approval
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clauseas 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unlessthat person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.Issued by: Lloyd's Register Deutschland GmbH, Adolf-Grimme-Allee 3 50829 Köln Germanyfor and on behalf of:1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 1
This is to certify that the Management System of:
TIMMER GMBHDieselstr. 37 48485 Neuenkirchen Germany
has been approved by LRQA to the following standards:
ISO 9001:2015
P.G. CornelissenIssued by: Lloyd's Register Deutschland GmbH for and on behalf of: Lloyd's Register Quality Assurance Ltd
Current Issue Date: 21 February 2017 Original Approvals:Expiry Date: 20 February 2020 ISO 9001 21 February 2005Certificate Identity Number: 10011577
Approval Numbers: ISO 9001 – 0026373
The scope of this approval is applicable to:
Development, manufacturing and distribution of pumps, pneumatic and electric components and vacuum lifters.
certified:DIN ISO 9001