ASSET ADVISORY & AUCTION SERVICES

For more information including a photo gallery, equipment list, and more, please visit

Items subject to prior sale. Buyers are advised &encouraged to inspect equipment and read

all Terms and Conditions prior to auction.

www.hgpauction.com

GLOBAL ONLINE AUCTION

Exceptional Offering: Global Online Auction

Surplus Assets Excess to Future Manufacturing Needs Of Triumph Aerospace. Nashville, TN

Starting: Nov. 30th, 2016 ( 7am CST ) | Ending: Dec. 1st, 2016 ( 12pm CST )

To view a complete asset list,visit our website @ www.hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

SURPLUS ASSETS EXCESS TO FUTURE MANUFACTURING NEEDS FROM: TRIUMPH AEROSPACE - NASHVILLE, TN - COMPLETE LISTING AVAILABLE ONLINE AT HGPAUCTION.COM

GLOBAL ONLINE AUCTION : NOV 30TH, 7AM - DEC 1ST, 12PM CSTPREVIEW: NOV. 29TH, 9AM - 4PM OR BY APPOINTMENT - CONTACT AUCTIONEER FOR FURTHER INFORMATION

TATCO DRIVMATIC G200BCHXR/400 C-FRAME ROUTER/DRILLER, JIB CRANE, 500 LB. CAP, #18, PLC CONTROLS, 48” GANTRY THROAT, 10-HP, 5000 RPM

TATCO DRIVMATIC ITC-L2-12-48-S C-FRAME ROUTER/DRILLER, JIB CRANE, 500 LB. CAP, #19, PLC CONTROLS, 48” GANTRY THROAT, 10-HP, 6000 RPM

ACC-ROUTER SERIES 3C CNC ROUTER, GE FANUC SERIES 18-M CONTROL, 4’ X 12’ TABLE, 460V, 3-PHASE, 60 HZ, 70A, TRANSMATIC DUST COLLECTOR & SULLAIR VS-10 AIR COMPRESSOR

ONSRUD CNC ROUTER, 3-AXIS, Z-25”, MACHINEMATE CONTROLS, 12’ X 79’ BED SIZE, 4-SPINDLES, 100- 7.5K RPM, 60-HP

GEMCOR DRIVMATIC G-400/39-96DP C-FRAME ROUTER DRILLER, #5, PLC CONTROLS, 96”D, , 4000 RPM, 10-HP

GEMCOR CNC 5- AXIS HORIZONTAL WING AUTO RIVETER, W/ A/B 7320 CONTROLS, 96”D GANTRY THROAT, 11.5’X 80’ ENVELOPE, 12K RPM, HIGH SPEED UPPER HEAD TRANSFER, HIGH SPEED DRILL AND SHAVE SPINDLE, HIGH SPEED SERVO BUCK

CONTACT Nick Dove Tel: (858) 847.0659 Email: ndove@hgpauction.com

SURPLUS ASSETS EXCESS TO FUTURE MANUFACTURING NEEDS FROM: TRIUMPH AEROSPACE - NASHVILLE, TN - COMPLETE LISTING AVAILABLE ONLINE AT HGPAUCTION.COM

GLOBAL ONLINE AUCTION : NOV 30TH, 7AM - DEC 1ST, 12PM CSTPREVIEW: NOV. 29TH, 9AM - 4PM OR BY APPOINTMENT - CONTACT AUCTIONEER FOR FURTHER INFORMATION

TATCO TA-548E-54 C-FRAME HOT PUNCH & ROUTING MACHINE, ERCO #1, PLC CONTROLS, 54” D

GEMCOR DRIVMATIC G400BCH/39A-60 C-FRAME ROUTER/DRILLER, # 1, PLC CONTROLS, 48” D, 5000 RPM, 10-HP.

SCIAKY PRESS TYPE 3 PHASE SPOT WELDER MODEL #11297. TYPE: PMCO 1STM75365, 440VAC , 60HZ, SEC. AMPS 60K ~8’HX9’LX3.5’W 3.5’, DEEP THROAT

KMT SLV-50R GANTRY TYPE WATER JET CUTTING MACHINE, W/ KMT ADS-500 HOPPER, KMT STREAMLINE SL-V50R PLUS, WILKERSON COMPRESSED DESICCANT AIR DRYER, POLY TANK, 50-HP & 60,000 PSI.

GENERAL DRIVMATIC G-39 C-FRAME ROUTER/DRILLER, # 3, PLC CONTROLS, 48” D, 4000 RPM, 10-HP

MARCHANT 848E C-FRAME HOT PUNCH & ROUTING MACHINE, ERCO #2, 48” D

To view a complete asset list,visit our website @ www.hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

SURPLUS ASSETS EXCESS TO FUTURE MANUFACTURING NEEDS FROM: TRIUMPH AEROSPACE - NASHVILLE, TN - COMPLETE LISTING AVAILABLE ONLINE AT HGPAUCTION.COM

GLOBAL ONLINE AUCTION : NOV 30TH, 7AM - DEC 1ST, 12PM CSTPREVIEW: NOV. 29TH, 9AM - 4PM OR BY APPOINTMENT - CONTACT AUCTIONEER FOR FURTHER INFORMATION

MCBEE AMERICAN AUTOCLAVE, #5, 300 PRESSURE, 200 VALUE SETTING, MAWP 300 PSI @ 600 DEGREE F, 12’ X 80’, PC CONTROLS. MFG. YR: 2001

SINGLE BEAM BRIDGE CRANE, W/ (2)- 1-TON HOISTS.

CLEVELAND TRAMRAIL SINGLE BEAM BRIDGE CRANE, W/ 1/2-TON HOIST

JUSTICE SINGLE BEAM BRIDGE CRANE, W/ 2-TON HOIST

DOUBLE BEAM BRIDGE CRANE, W/ SPREADER BAR

AMERICAN GFM US-40 ULTRASONIC CUTTING/ROUTING MACHINE W/ VIDEOJET EXCEL 2000 INK JET PRINTER , 6’ X 56’, 5-AXIS, GRM PC

CINCINNATI MILACRON 5-AXIS FLAT TAPE CNC LAYER MACHINE, 26’ X 61’, AB 975 CONTROLS, TRAVEL: X-AXIS 648”, Y-AXIS 200”, Z-AXIS 36”, ROTATION C-AXIS +/- 190 DEGREE, CUTTER ANGLE D-AXIS +1 TO 181 DEGREE, CUTTER TRAVEL V-AXIS 6” & 12” TAPE 14.25”, LONG/TRANSVERSE FEED RATE 0.1 TO 1800IN/MIN, VERTICAL FEED 0.1 TO 600IN/MIN, C-AXIS 0.1-9000 DPM, D-AXIS O.1-10,800DPM, V-AXIS 0.1 - 1200IN/MIN, U-AXIS 0.1-1800IN/MINZ2TRACK 150N/MIN, WORK SURFACE 648’ X 200’, WORK HEIGHT 27” TO 63”, 8-SPINDLE.

CINCINNATI MILACRON AE 3-AXIS, G/T CNC TAPE LAYER MACHINE, 20’ X 54’, AB 8200 CONTROLS, 400 SQ. FT. PER HOUR, FINGER SENSORS, 8-SPINDLE.

MANY OTHER ASSETS INCLUDINGAIR DRYERS, CABINETS, CANTILEVER RACKS, SHOP TOOLS, JIB CRANES, CUTTING TOOLS, FORKLIFTS, AIR COMPRESSORS AND MUCH MORE!

COMPLETE LISTING ONLINE

CONTACT Nick Dove Tel: (858) 847.0659 Email: ndove@hgpauction.com

SURPLUS ASSETS EXCESS TO FUTURE MANUFACTURING NEEDS FROM: TRIUMPH AEROSPACE - NASHVILLE, TN - COMPLETE LISTING AVAILABLE ONLINE AT HGPAUCTION.COM

GLOBAL ONLINE AUCTION : NOV 30TH, 7AM - DEC 1ST, 12PM CSTPREVIEW: NOV. 29TH, 9AM - 4PM OR BY APPOINTMENT - CONTACT AUCTIONEER FOR FURTHER INFORMATION

PRECISION QUINCY EC-620-6MM OVEN, 460V, 3-PHASE, 60 HZ, 16.6A, 10-HP, 25’ LONG X 10’ WIDE X 6’ HIGH

ADDIS XR125 GANTRY TYPE ULTRASONIC C-SCAN SYSTEM, PC CONTROLS, 13.3’ X 24.8’, 4-AXIS

RAYMOND 71-SL60TF ELECTRIC SIDE LOADER FORK TRUCK, 6,000LB CAP, 2-STAGE, 193” REACH

UNITED TM-10 TENSILE TESTER

POWERMATIC ROUTER MACHINE, FANUC 15 CONTROLS, 5’ X 20’ BED SIZE, 1-SPINDLE, 30,000 RPM, 15-HP, Z-37”

DOALL 36-B VERTICAL BAND SAW, W/ DORIT DUST COLLECTOR

CHICAGO PNEUMATIC CP-450EA C-FRAME HOT DIMPLING MACHINE, # 2, 36” THROAT, 7.5” GAP, 9/16” TOOL HOLE SIZE, COMPRESSION RIVETER

MATEC GANTRY TYPE ULTRASONIC C-SCAN SYSTEM, PC CONTROLS, 11.4’ X 19’, 3-AXIS

www.hgpauction.comFor complete Terms of Sale, visit our website at:

GLOBAL ONLINE AUCTIONStarting: November 30, 2016 – 7:00 am CSTEnding: December 1, 2016 – 12:00 pm CST

AUCTION LOCATION1431 Vultee Blvd., Nashville, TN

AUCTION PREVIEWTuesady, Novmber 29, 2016, 9:00 am - 4:00 pm PDTContact Nick Dove @ (858) 847.0659 for more information or to set up a private viewing.

For more information including a photo gallery, equipment list, and more, please visit us online atwww.hgpauction.comItems subject to prior sale. Buyers are advised &encouraged to inspect equipment and read all Terms and Conditions prior to auction.

AUCTIONEER’S NOTEHGP is pleased to be selected to conduct this Global Online Auction for:

Triumph Aerospace

AFFILIATIONS

GLOBAL HEADQUARTERSHacienda Del Mar12625 High Bluff DriveSan Diego, CA 92130Phone: (877) 303.8040 Fax: (866) 388.8595

Contact InformationNick Dove, Tel: (858) 847.0659 Email: ndove@hgpauction.com

ASSET ADVISORY & AUCTION SERVICES

FIRST CLASS MAILPOSTMASTER: Dated Material.Please Deliver Promptly.

Presorted First Class Mail

U.S. Postage PAID

San Diago, CAPermit No. 00

ABOUT THE SALEThis sale features Assets Excess to Future Manufacturing Needs Of Triumph Aerospace. Nashville, TN

Please view our website at www.hgpauction.com for the bidding instructions and the full terms of the sale. Thank you for your interest, and we look forward to providing you quality equipment sales and World Class Service.

KEY ASSETSCell Sorter • Cell Analyzer • Sampler System • ScanScope • Mulitlabel Counter • Benchtop Bioreactors • Coulter Counter • Microscopes • Centrifuges • Incubators • Freezers • BioSafety Cabinets • Sterilizer • Encapsulators • Shakers • Stirrers • Balances • Scales • Hot plates • Mixers • Flame Cabinets • Large Quanity of Glassware • Larger Quantity of Consumables • And More

Scan this QR Code with your smartphone for More Information.

A BUYER’S PREMIUM WILL APPLY AT THIS SALE

Surplus Assets Excess to Future Manufacturing Needs Of Triumph Aerospace. Nashville, TN

Immediately Accepting Offers On All Assets Prior To Auction

Starting: November 30, 2016 – 7:00 am CSTEnding: Decmber 1, 2016 – 12:00 pm CSTLocation: 1431 Vultee Blvd., Nashville, TN 37217

WOULD YOU LIKE TO SELL AN ASSET?Simply call 1.650.207.0627 and speak with Kirk Dove, Managing Partner for more information. We will be glad to listen to your specific needs and from that HGP can prepare a detailed solution for your review that will maximize the returns for you’re assets for the company and It’s Shareholders.

For more information including a photo gallery, equipment list, and more, please visit us online at www.hgpauction.com. Items subject to prior sale. Buyers are advised & encouraged to inspect equipment and read all Terms and Conditions prior to auction.