GLM-introduction and approach

20
G.L.M. INDUSTRIES L.P. INTRODUCTION ENGINEERING DEPARTMENT Ashraf Hussain, P.Eng , PMP Manager Engineering Department

Transcript of GLM-introduction and approach

Page 1: GLM-introduction and approach

G.L.M. INDUSTRIES L.P.

INTRODUCTION ENGINEERING DEPARTMENT

Ashraf Hussain, P.Eng , PMPManager Engineering Department

Page 2: GLM-introduction and approach

Profile of Engineering Department Engineering Manager:

M. Ashraf Hussain, P.Eng. PMP, SSBBB.Sc. in Mechanical Engineering.Post Graduate Diploma in Industrial Production Engineering. 

Design Engineer:Lee J. Crick, P.Eng.B.Sc. in Mechanical Engineering. 

Design Engineer:Muhammad ShoibMEng. in Mechanical EngineeringB.Sc. in Mechanical Engineering

Design Engineer:Souvenir MuhammadB.Sc. And M.Sc. in Mechanical Engineering, PhD student

Page 3: GLM-introduction and approach

Profile of Engineering Department Drafting Supervisor:

Kevin Sparrow, CET 

Senior Drafting TechnologistY. Lam .CET

Senior Drafting Technologist:Yuri Bouldakov , CET

Senior Drafting Technologist:Donna Fleming, CET

Drafting TechnologistTroy Burrows

Drafting TechnologistJudy Terry

Document control ClerkCarine Assemien

Document control ClerkGael Chomik

Page 4: GLM-introduction and approach

Certificate of Authorization Permit: APEGA, P03714 APEGS, 25806 ABSA

Construct, Repair/Alter ASME Section VIII-1 pressure vessels Construct, Repair/Alter ASME B31.1 Power Piping and ASME B31.3

process piping Conduct performance qualification testing of pressure welders and machine welding operators

ASME U –stamp for manufacture of pressure vessel

NBBI ULC

Manufacture of vertical and horizontal tanks CWB

Certified to CSA standard W 47.1 for Fusion welding of steel

 

Page 5: GLM-introduction and approach

Standards Compliant to: API 650 11th Edition. API 620 AWWA D100 GLM Standard (GOOD INDUSTRY PRACTICES) ASME Section VIII and IX ASME B31.3 NBC 2010 OH&S FIRE CODE

 

Page 6: GLM-introduction and approach

Our values: Safety first Integrity of design and Perform Quality Work Transparency of information Commitment to satisfy Targets and Deadlines Ethics Professionalism

 

Page 7: GLM-introduction and approach

Our Capabilities: Complete design of tanks and pressure vessels. Heating calculations for Fire tubes, electric, steam and glycol heating

system. Design of burner system as per CSA B149.3. Maximum fluid in and out flow rate calculation. Pressure safety valve and Pressure vacuum safety valve sizing

calculation. Tank pressure de-rating calculation to increase the pressure or flow rate. Load cell and structure design if the fluid is measured by weight. Laser scanning and sizing the tank if real state is an issue. Forensic Engineering and under pining for foundation heaving. Expansion joints with monitoring and secondary containment design. Lift design of roofs and tanks.

 

Page 8: GLM-introduction and approach

Our Tools: AME Tank

AME Tank can produce both 2-D & 3-D models.

It is capable of performing calculation as per API 650 providing the opportunity to double check design calculations and manufacturability (identifying interference of parts) .

Models built in AME Tank can be exported to Autodesk Inventor and AutoCAD to speed up the production of drawings.

 

Page 9: GLM-introduction and approach

Our Tools (continued…): GLM Custom built Excel Program for

designing (including calculations) Tanks and components.

Updated to comply with the latest version of API 650.

Approved accuracy of Calculations.

 

Page 10: GLM-introduction and approach

Our Tools (continued…): FEA Software. GLM is utilizing Simulation Mechanical by Autodesk

Predict Product Performance Optimize Product Designs Validate Design Decisions Build it, break it, and fix it prior to hitting the shop floor…

 

Page 11: GLM-introduction and approach

Our Tools (continued…): Nozzle/PRO and FE/Pipe

Uses FEA for predicting allowable nozzle loads Design Nozzles and Reinforcing Pads to support existing loads

provided by piping department.

 

Page 12: GLM-introduction and approach

Our Tools (continued…): Compress

Uses FEA for predicting allowable thickness Code calculation for pressure vessels

 

Page 13: GLM-introduction and approach

Example of some projects Example of design of roof lift

Design stage:

Design implementation:

Page 14: GLM-introduction and approach

Example of some projects Example of design of roof lift

Outcome:

Page 15: GLM-introduction and approach

Example of some projects Example of lifting the tank

Loading (3 point air bag lift) Due to symmetry tank was modelled as one half of the original.

Page 16: GLM-introduction and approach

Example of some projects Example of lifting the tank (continued…)

Stresses at the lifting points:

Deflection of the bottom plate (with magnification 10)

Page 17: GLM-introduction and approach

Our Approach: Prepare calculations, General Arrangement drawings for all the tanks,

Inspection Test Plan and Welding Procedures for Client’s approval.

Be proactive: starting detail design and make necessary changes as client approval arrives.

Scheduling shop built parts for uninterrupted field erection.

Willing to work simultaneously on several tanks within our scope.

Our involvement will be spontaneous to all parts of all the tanks that purchased from sub vendors.

Set target to achieve all deadlines.

Page 18: GLM-introduction and approach

Work progress: Being proactive, we have prepared

calculations, 50 drawings as well as part of the General Arrangement (GA) drawings for designs for tanks.

Hoping to have some clarification in this meeting (thanks to the organizers) so that we can produce almost flawless design and Detail drawings.

Page 19: GLM-introduction and approach

Summary: We are prepared to:

Perform quality work Hit all deadlines

We are looking forward to work with all our clients.

Page 20: GLM-introduction and approach

Thank youQuestions?