Glenisa Angus Catalogue 2013
74
-
Upload
brittany-pearce -
Category
Documents
-
view
220 -
download
2
description
60 Black Angus Bulls sell at Glenisa on Saturday, August 17th 2013
Transcript of Glenisa Angus Catalogue 2013
![Page 1: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/1.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 2: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/2.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 3: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/3.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 4: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/4.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 5: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/5.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 6: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/6.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 7: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/7.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 8: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/8.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 9: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/9.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 10: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/10.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 11: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/11.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 12: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/12.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 13: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/13.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 14: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/14.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 15: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/15.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 16: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/16.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 17: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/17.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 18: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/18.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 19: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/19.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 20: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/20.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 21: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/21.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 22: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/22.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 23: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/23.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 24: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/24.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 25: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/25.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 26: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/26.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 27: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/27.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 28: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/28.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 29: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/29.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 30: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/30.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 31: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/31.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 32: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/32.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 33: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/33.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 34: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/34.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 35: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/35.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 36: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/36.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 37: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/37.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 38: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/38.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 39: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/39.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 40: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/40.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 41: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/41.jpg)
![Page 42: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/42.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 43: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/43.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 44: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/44.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 45: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/45.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 46: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/46.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 47: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/47.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 48: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/48.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 49: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/49.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 50: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/50.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 51: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/51.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 52: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/52.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 53: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/53.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 54: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/54.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 55: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/55.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 56: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/56.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 57: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/57.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
![Page 58: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/58.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 59: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/59.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 60: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/60.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 61: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/61.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 62: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/62.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 63: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/63.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 64: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/64.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 65: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/65.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 66: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/66.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 67: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/67.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 68: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/68.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 69: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/69.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 70: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/70.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 71: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/71.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 72: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/72.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 73: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/73.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no
![Page 74: Glenisa Angus Catalogue 2013](https://reader035.fdocuments.us/reader035/viewer/2022062400/568bf4a71a28ab89339ed2c5/html5/thumbnails/74.jpg)
Prinect Color Editor
Page is color controlled with Prinect Color Editor 4.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated_v2_eci.icc RGB Image: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: eciRGB.icc Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: yes Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: yes Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: yes Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Trap Editor
Page is trapped with Trap Editor 6.0.84 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document traps, with the free Trap Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Settings: Width: 0.088 mm = 0.250 pt Printorder: Cyan / Magenta / Yellow / Black / Step Limit: 25.0% Common Density Limit: 0.50 Centerline Trap Limit: 100% Trap Color Scaling: 100.0% Image to Object Trapping: yes Image to Image Trapping: no Black Width Scaling: 100.0% Black Color Limit: 95.0% Overprint Black Text: 12.0 pt Overprint Black Strokes: no Overprint Black Graphics: no