Gleams above Asia - Taiwan Trade Shows · (a) The Show Management will provide personnel for...
Transcript of Gleams above Asia - Taiwan Trade Shows · (a) The Show Management will provide personnel for...
11
Gleams above Asia Like Taipei 101Every year, from the port of Taichung, Taiwan, sail millions of woodworking machines across the oceans for factories and workshops in over 142 countries. Proficient buyers know best – The 101 island in Southeast Asia is the place to scout for optimal tools with exceptional quality.
Not only does Taiwan supply 7% of woodworkers ’ equipment around the globe, ranked 4th worldwide, it is also the Asia pivot of high-end woodworking. This, of course, did not come by chance: Apart from being one the most democratic, liberalized markets in Asia, Taiwan also appeals to wood professionals with its 60-year-old industry cluster and respect for intellectual property.
As the most high-end trade show for woodworking in Asia, Wood Taiwan props you up high above the skyline, to be seen across Asia – like the world-renowned Taipei 101. You wi l l be exhibiting next to industry leaders aspiring to excellence as much as you do, adding to your positive corporate image. Also, fostering business will be a highly international profile of visitors and real professional ambiance.
Reserve your stand now to stand high above Asia!
Wood Taiwan Exhibitor Benefits
Reach buyers from over 55 countries
Get more publicity by uploading company info and catalogues, which can be viewed both by browser and Wood Taiwan app
Publish press releases
Upload photos
Announce event schedules
Exchange cards by simply scanning buyers’ QR code
Free Wi-Fi in exhibition hall for instant following-up
2
● Machines & Equipment for Forestry & Primary Processing- Roundwood Processing - Drying, Steaming & Impregnation of Solid Timber - Production of Veneers & Plywood - Production of Particle Board, Fiber Board & OSB
● Machines & Technical Equipment for Secondary Processing
● Machines & Technical Equipment for Surface Finishing
● Machines & Technical Equipment for Assembly & Packaging
● Materials Handling, Warehousing & Commissioning Technology
● Industrial Robots & Accessories
● Machines & Plants for Special Product Groups
● Portable Machines for Processing of Timber & Plastics
● Tools & Auxiliaries
● Machines, Equipment & Tools for Maintenance & Manufacturing of Tools
● Machines for Special Processes
● Woodworking Machinery Components
● Use of Residual Wood, Generation of Energy & Heating Using Wood Fuels
● Electronic Data Acquisition & Data Processing Equipment, Measuring, Testing & Control Systems for Woodworking
● Materials, Hardware, Products & Accessories for the Wood & Furniture Industry
● Intelligent Manufacturing
● Service Sector- Technical - Machining & Treatment - Authentication / Certification - Education / Training
roduct PCategories
- Sanding - Presses & Equipment for
Gluing - Veneer & Plywood
Processing - Pressing - Polishing & Buffing- Postforming- Woodworking Feeders - Folding - Woodworking CNC
Machining Center
- Sawing - Moulding- Planing & Routing - Finger Jointer - Tenoning - Mortising - Profiling & Sizing - Sizing & Edge Banding - Boring - Dowel-driving & Hardware
Inserting - Wood Lathes
- Mass Communication / Media / Public Relation - Exhibition - Industrial / Government Association
3
Facts and FiguresFull name
Taiwan International Woodworking Machinery Show
Number of exhibitors 200 (projected)
Date 2-5 April, 2018 Number of booths 1,060 (projected)
VenueTaipei Nangang Exhibition Center, Hall 1(4th floor)
Number of visitors 6,400 (projected)
Organizers
Taiwan External Trade Development Council (TAITRA)Taiwan Woodworking Machinery Association (TWMA)
Exhibition space 9,540 m2
Position Most high-end show of Asia
Visitor profile
Industry: Forestry, sawmills, machinery, chemical, furniture manufacturers, design,logistics, quality control, paint, wholesaler, retailer, trader, distributor, and othersPosition: Managerial, purchasing, production, R&D, marketing, sales
Exhibition ScheduleSchedule Date
Booth set-up and exhibits move-in Mar.30-Apr.1
Showtime Apr. 2-5
Booth dismantling & exhibits move-out Apr.6
Stand ConstructionShell Scheme Package A1(W3.0m x D3.0m x H2.5m)Total price
Total price: $1,440 (VAT incl.) (main aisle: $1,600)
● Standard partition 1 Set ● Needle punch carpet 9 m2● Company name fascia board 1 Pc● Info desk 100x50x75cm1 Pc● Folding Chair 3 Pcs ● Spotlight 18W 3 Pcs● Socket (110V/500W) 1 Pc ● Waste paper basket 1 Pc
4
(1) Raw space rate: $1,240 per unit (3mx3m, VAT incl.) (main aisle: $1,400)(2) Down payment payable: $500 per space (3mx3m). All banking charges, if any, are to be
borne by the exhibitor.(3) Booth location: Booths will be allocated based on (a) booth size and (b) date of application.(4) All paid fees, including down payment, are non-refundable under any circumstances.
Schell Scheme Package B1 (W6.0m x D3.0m x H2.5m)
Total price$2,780 (VAT incl.) (main aisle: $3,100)
● Standard partition 1 Set ● Needle punch carpet 18 m2● Company name fascia board 2 Pcs● Info desk 100x50x75cm 1 Pc ● Glass round table Dia.75cm 1 Pc● Folding Chair 6 Pcs ● Spotlight 18W 6 Pcs● Socket (110V/500W) 1 Pc ● Waste paper basket 1 Pc
Travel TipsSubway
Songshan Airport ----------------------- Brown Line ca. 21 min Taipei Nangang Exhibition Center
Taipei Main Station --------------------- Blue Line ca. 20 min Taipei Nangang Exhibition Center
Bus
Taoyuan International Airport ------- 1843 ca. 80 min Nangang Exhibition Center
Songshan Airport (China Airlines Stop) ---- R32 ca. 38 min Nangang Software Park South1
Taipei Main Station --------------------- 205/212/276/605 ca. 43 min TWTC Nangang Exhibition Hall2
1 8-minute walk to the venue.2 3-minute walk to the venue.
5
Contact UsTaiwan External Trade Development Council (TAITRA)Taipei World Trade Center Exhibition Hall5 Hsin-yi Rd., Sec. 5, Taipei 11011, TaiwanTel.: (886) 2 2725 5200Fax: (886) 2 2725 [email protected]
TAITRA Overseas OfficesTAITRA has sixty Overseas Offices around the world to offer you the most accommodating services. Find the nearest Office at: http://www.taitra.org.tw/branches_01.asp for free counseling.
Inquiries about Exhibit SpaceShow Manager:Wolfgang TangTAITRA Exhibition DepartmentTel.: +886 2 2725 5200 ext. 2619E-mail: [email protected]
Official Website: www.woodtaiwan.com
VENUE: Taipei Nangang Exhibition Center, Hall 1No. 1, Jingmao 2nd Rd., Nangang District, Taipei City 11568, Taiwan
6
TERMS AND REGULATIONS FOR PARTICIPATION
1. Participation Application(a) When signing the related application forms, participants agree to follow all the existing
Regulations and further Regulations that might be made to modify them.(b) Once signed and submitted by the Applicant and confirmed by the Show Management, the
contract will be established and come into effect.(c) Violations of the Regulations can result, by decision of the Show Management, in the exclusion
of the transgressors whose damage claim, if any, will be rejected.2. Payment Schedule
The space rental fee is due after space allocation. A debit note will be sent to the Applicant. In the event of cancellation, the payment will not be refunded under any circumstances.
3. Adherence to Copyright Patent Laws(a) It is strictly forbidden to display logos, licenses, or patented items registered by other
companies.(b) Violations will result in immediate removal of the displays, with one year's suspension from
exhibiting in all shows organized by TAITRA. The exhibitors bear the responsibility for all penalties without recourse or indemnity.
4. Space Assignment & Unoccupied Space(a) The Show Management will determine the number and location of the booths assigned to each
Exhibitor, in accordance with the nature of the exhibits or in the manner the Show Management deems appropriate.
(b) The Show Management reserves the right, should any Exhibitors' space remain unoccupied on the opening day without reasonable cause, to assign the said space to another exhibitor, or use the said space in any other manner deemed suitable.
5. Sub-letting of SpaceThe Exhibitor shall not assign, sub-let or apportion the whole or any part of the assigned space or have representatives, equipment, or materials from firms other than his own in the exhibit space.
6. Venue & Show Dates ChangeThe Show Management reserves the right to change the venue and date of the Exhibition under certain circumstances. In the event of change of venue and/or date, or cancellation of the Exhibition, the Exhibitors shall not be entitled to any claim for compensation in connection with the booking of participation.
7. Construction/Decoration of Stand and Removal of Exhibits from Hall(a) All exhibitors ought to comply with all regulations in the Exhibitor Manual and complete their
construction and/or decoration by the date and time stipulated by the Show Management.(b) Exhibitors must remove all exhibits from the Exhibition Hall within the move-out period
stipulated by the Show Management. They will be held responsible for any loss or damage to the Exhibition Hall due to delayed removal.
8. Insurance(a) In addition to insurance for exhibits in transit between the port of shipment and the fair site, the
exhibitors are advised to also take out adequate insurance (fire, theft, water, accident, natural disasters and third party liability, etc.) for their exhibits during the exhibition (including build-up and dismantling periods), and during storage in the Show Management's warehouse.
(b) Exhibitors are advised to hire their own security guards, for their valuable exhibits during the exhibition (including build-up and dismantling periods).
9. Exhibit Limitations(a) Exhibitors are not permitted to erect booth partitions of over 250cm in height.(b) Advertising materials such as signs, posters and other advertising decorations can be extended
to a height of 400cm.(c) Any signs or decoration higher than 250cm in full view must be decorated.
10. Selling from StandSelling of exhibited goods on the spot and the soliciting of customers outside stands is strictly forbidden and those doing so can be immediately expelled from the exhibition.
7
11. Breach of contract and Withdrawal by Exhibitor(a) In case of the Exhibitor's refusing the use of whole or a part of the space reserved and allocated
or in case of the exhibitor default in payment by the stipulated date, the Show Management has the right to terminate the contract forthwith and the part of rental already paid shall not be refunded.
(b) In case of the Exhibitor withdrawing from participation without the Show Management's approval, rental already paid by the Exhibitor shall not be refunded.
12. Security & Organizer's Liability(a) The Show Management will provide personnel for maintaining order during the show period.
Responsibility for guarding stands during the build-up, exhibition hours and dismantling period, shall rest with the exhibitors concerned.
(b) During the booth erection and dismantling period and during the show, the booths must be manned by exhibitors at all times.
(c) The Show Management shall not be held accountable or liable for any damage, loss, harm, or injury to any person or the property of the Exhibitor or of the exhibitor's officers, and / or employees, agents, and visitors which result from theft, water, fire, flood, natural disasters, or any other cause.
(d) All Exhibitors are requested to turn off the power supply before leaving their exhibition booths. Unless otherwise agreed, the Show Management will disconnect the main power supply at 5 pm each day.
(e) Exhibitors should comply with a fire control regulation. If any fire occurs due to the improper installation of decorations, construction or use of electric appliances, the exhibitor will be legally responsible for any loss or damage, and pay penalties of up to NT$100,000 to TAITRA.
13. Operation(a) The Exhibitor shall keep his booth(s) staffed at all times during show hours.(b) The Show Management reserves the right to restrict exhibits to a minimum noise level. Sound
volume from booths should not exceed 85 dB.(c) The Show Management reserves the right to reject the exhibits or to stop the exhibition on the
exhibitor's account, if he fails to lower the noise level or to resolve exhibition pollution such as dust, smog, unpleasant odors, the emission of stimulating gases, volatile organic chemicals, or other pollutants.
14. Interruptions and/or Disruptions of the ExhibitionExhibitors shall not cause interruptions and/or disruptions of the exhibition, which result in the protest or commotion at its booth, either inside or outside the showground, due to its debt or its private dispute at any time during the exhibition or during move-in and move-out. If and when such an interruption and/or disruption influences the order of the exhibition or public image of the Show Management, and the exhibitor involved or concerned is unable to deal effectively with private disputes and/or protests, the exhibitor understands and agrees that the Management can terminate the exhibition agreement. The exhibitor's booth(s) may be shut down immediately resulting with no refund. The exhibitor shall be required to indemnify the Management against any and all claims, liabilities, costs and expenses arising of such interruptions and/or disruptions thereof.
15. Supplementary Clauses(a) Whenever necessary, the Show Management shall have the right to issue supplementary
regulations in addition to those indicated in the Terms and Regulations for Participation to ensure the smooth management of the Exhibition.
(b) Any additional written regulation shall form part of the Terms and Regulations for Participation and shall be binding on the exhibitors.
(c) In the event of any occurrences not foreseen in this manual, the decision of the organizer shall be final.
APPENDIX A EXHIB. NO:
APPLICATION FORM BOOTH NO:
(To be left blank)
Company Information (As it should appear in the exhibitor directory)
Company Name ___________________________________________________________________________
Address ___________________________________________________________________________
___________________________________________________________________________
Postal code _________________________________ Country _________________________________
Phone _________________________________ Fax _________________________________
Email _________________________________ URL _________________________________
Check one Manufacturer Distributor Dealer Importer Other: __________
Trade Show Contact Information
Name _________________________________ Title _________________________________
Phone _________________________________ Email _________________________________
Products to Be Displayed
Product Codes (Please choose from Appendix B)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Other: ____________________________________________________________________________________
Dimensions of Machine
m t m t
____ x ____ x ____ cm ______ kg ____ x ____ x ____ cm ______ kg
m t m t
____ x ____ x ____ cm ______ kg ____ x ____ x ____ cm ______ kg
No. of Booth(s)
(in 3m x 3m units)
Distributorship (optional)
Company Name Country Company Name Country
We have read and agree to abide by the Terms and Regulations for Participation and other terms and regulations
made by TAITRA in connection with Wood Taiwan.
Authorized Signature Title Date
The above personal data will be used by TAITRA only in order to forward the applicant (by phone, mail and other means) information about exhibitions or trade promotion activities in the years 2015-2020. Those who wish to exercise any of the following rights, please contact Wood Taiwan Team ([email protected]): 1. Make inquiry and request for a review of personal information; 2. Make request for duplications of personal information; 3. Request supplement or correct personal information; 4. Request stop of collection, processing or use of personal information; 5. Request deletion of personal information.
EMAIL [email protected] FAX (886) 2 2725 1959
8
9
PRODUCT CODESAPPENDIX B
Code Product Name
Machines & Equipment for Forestry & Primary Processing (Production of Semi-Finished Products)
Roundwood Processing
440101 Storage Systems & Log Sorting Stations for Roundwood Yards
440102 Machines & Tools for Debarking of Roundwood
440103 Vertical & Horizontal Log Band Saws
440104 Single & Double Arbor Circular Saws for Roundwood
Drying, Straming & Impregnation of Solid Timber
440105 Kiln Driers & Controllers
440106 Vacuum Driers
440107 Other Driers for Special Processes such as High Frequency Drying, Micro Wave Drying, Dehumidification Drying
Production of Veneers & Plywood
440108 Vertical & Horizontal Veneer Slicers
440109 Veneer Peelers
440110 Roller & Net Veneer Dryers
440111 Veneer Clippers
440112 Production of Particle Board, Fiber Board & OSB
Machines & Technical Equipment for Secondary Processing
Sawing Equipment
440113 Various Circular Saws
440114 Radial Arm Saws
440115 Jig Saws
440116 Frame Saws
440117 Vertical & Horizontal Band Saws
440118 Vertical & Horizontal Multiple Band Saws
440119 Copying Band Saws
440120 Cut-off Saws
440121 Optimizing Cut-Off Saws
440122 Table Saws
440123 Panel Saws
440124 Straight Line Rip Saws
440125 Multiple Rip Saws
440126 Optimizing Movable Saws
Moulding / Planing & Routing Equipment
440127 Surface Planers
440128 Thickness Planers
440129 Double-side Thickness Planers
440130 Three & Four-side Planers / Moulders
440131 Spindle Planers
440132 Routers
440133 CNC Routers
440134 Copy Shapers
440135 Copy Carving Machines
440136 Rod Moulders
440137 Groove Cutters for Stairs, Ladders & Louvers
440138 Dovetail Moulders
440139 Multiple Double-end Shaping & Boring Machine
Finger Jointer Machines
440140 Finger Joint Cutting Machines
440141 Glue Application Systems for Finger Joints
440142 Finger Jointing Presses
440143 Automatic Finger Jointing Lines & Auxiliary Equipment
Tenoning Machines
440144 End Tenoners for Straight Tenons (Single / Double)
440145 Round End Tenoners
440146 Triangular Tenoners
440147 Rectangular Tenoners (Single / Double)
440148 CNC Tenoners
440149 Oscillation Mortisers (Single / Multiple Spindle)
440150 Profiling & Sizing Machines
Sizing & Edge Banding Machines
440151 Single-end Sizing & Edge Banding Machines
440152 Double-end Sizing & Edge Banding Machines
Machines for Boring, Dowel-driving & Hardware Inserting
440153 Boring / Drilling Machines with One or Several Boring Heads
440154 Dowel Hole Boring Machines
440155 Boring Machines for Sawing, Milling, Moulding, Boring & Dowel-driving
10
440156 Machines for Boring, Milling, Hardware Inserting
440157 CNC Boring Machines
440158 Dowel Driving Machines
440159 Machines for Hardware Inserting
440160 Slot Boring Machines
440161 Line Boring Machines for Panel
Wood Lathes
440162 Profiling Lathes
440163 Copying Lathes
440164 CNC Lathes
Sanding Machines
440165 Wide-belt Sanders
440166 Longbelt Sanders with Table
440167 Cross-belt Sanders
440168 Lacquer Sanding Machines
440169 Sanders for Curved & Moulded Components
440170 Wide-belt Sanders for Plywood
440171 Profile Sanders
440172 Disc Sanders
440173 Drum Sanders for Surface Sanding
440174 Sanders for Round Rods
440175 Sanders for Lathe Turned Parts
440176 Segmented Pad Sanders
440177 Planer / Sander Combinations
Presses & Equipment for Gluing of Solid Timber Components
440178 Pneumatic & Hydraulic Rotary Composers
440179 Clamp Carriers
440180 High Frequency Board Jointing Machine
440181 High Frequency Wood Bending Machines
Veneer & Plywood Processing Equipment
440182 Single & Double Knives Veneer Guillotines
440183 Longitudinal & Crossfeed Veneer Splicers
440184 Veneer Finger Jointer
440185 Scarfing Lines for Peeled Veneer
440186 Plywood Processing Equipment
440187 Veneer Core Builders
440188 Pressing & Gluing Devices for Plywood
Pressing Equipment
440189 Glue Spreaders for Boards
440190 Hot Presses for Plywood & Veneers (Single / Multiple Layer)
440191 Cold Presses for Plywood & Veneers
440192 Continuous Presses
440193 Short-cycle Presses
440194 Membrane Presses
440195 Polishing & Buffing Machines
440196 Postforming Machines
440197 Woodworking Feeders / Feed Carriages
440214 Folding Machines
440198 Woodworking CNC Machining Center
Machines & Technical Equipment for Surface Finishing
440201 Equipment for Surface Printing such as Wood Grain
440202 Automotive & Robots Spraying Machines
440203 Rotation Spraying Systems
440204 Electrostatic Spraying Equipment
440205 Curtain Coaters
440206 Vacuum Coaters
440207 Roller Coaters
440208 Spray Walls & Booths
440209 Lacquer Drying & Curing Lines
440210 Conveyors for Lacquer Plants
Machines & Technical Equipment for Assembly & Packaging
440211 Assembly Lines for Furniture & Parts
440212 Nailing, Stapling Machines & Screw-setting Machines
440213 Packing Machines
Materials Handling, Warehousing & Commissioning Technology
166607 Lifting Platform
440215 Stacking & Vacuum Lifting Equipment
166619 Conveyor, Belt Type
440216 Overhead Conveyors
166641 Other Handling Equipment
168812 Industrial Robots & Accessories
Machines & Plants for Special Product Groups
440217 Machines for Window & Door Frames & Parts
440218 Machines for Timber Constructions
440219 Machines for Laminate Floorings
440220 Machines for Wooden Packaging such as Pallets, Boxes, etc.
440221 Machines for Drawers for Furniture
162053 Picture Frame Making Machine
440222 Machines for Bamboo & Rattan Processing
11
440223 Machines & Equipment for Manufacturing Honeycomb Boards
165237 Machines for Paper Laminating Lines
166018 PVC Laminating Machine
Portable Machines for Processing of Timber & Plastics
440224 Portable Band & Circular Saws
440225 Portable Planers & Routers
440226 Portable Edgebanders
440227 Portable Boring Machines
440228 Portable Sanders
Tools & Auxiliaries
440229 Band Saw Blades
440230 Frame Saw Blades
169311 Circular Saw Blades
440231 Planer Heads & Cutters
151068 Router Heads & Cutters
440232 Boring Heads
440233 Finger Joint Cutters
440234 Knives for Plywood & Veneering Industry
440235 Tool Clamping Devices
440236 Sanding Belts & Buffing Tools
169394 Other Woodworking Tools
Machines, Equipment & Tools for Maintenance & Manufacturing of Tools
440237 Saw Sharpeners
160611 Saw Brazing & Welding Machines
440238 Knife Grinding Machines
440239 Sharpeners for Moulding Cutters
440240 Frame Saw Blade Sharpeners
440241 Profile Cutter Sharpeners
440242 Drill Bit Sharpeners
Machines for Special Processes
160629 Laser Cutting Machine
160597 High Frequency Machine
160630 Water Jet Cutting Machines
Woodworking Machinery Components
182501 Motor Driven Equipment
169130 Pneumatic Components & System
169129 Hydraulic Components & System
169707 Machine Parts and Components
440243 Electrical Parts & Components
Use of Residual Wood, Generation of Energy & Heating Using Wood Fuels
440244 Chip & Dust Extraction / Collecting Equipment
440245 Travelling Dust Collectors
162009 Dust Collection Equipment
440246 Wood Pelleting Equipment
440247 Chopping & Crushing Machines
440248 Briquetting Pressing Machines
440249 Electronic Data Acquisition & Data Processing Equipment, Measuring, Testing & Control Systems for Woodworking
Materials, Hardware, Products & Accessories for the Wood & Furniture Industry
354048 Lumber
440250 Wood-based Panels / Boards
440251 Veneers
440252 Decorative Paper / Films
145508 Abrasives & Sanding Belts
034000 Adhesives
035524 Wood Paint
440253 Hardware & Components for Furniture & Wooden Articles
440199 Other Woodworking Machinery
410102 Technical Services
410202 Machining & Treatment Services
414003 Authentication / Certification Service
410103 Education / Training Services
411001 Mass Communication / Media / Public Relation
412000 Exhibition Services
410108 Industrial / Government Association