GLAZED CERAMIC MOSAICS

GLAZED MOSAICS

GLAZED MOSAICSGLAZED MOSAICS

GLAZED HERRINGBONECOLORS

WHITE DANDELION FRENCH VANILLA

LATTE JADITE RED

DOVE CUMULUS CORNFLOWER

GLAZED STACK

WHITE DANDELION VANILLA JADITE

LATTE SAND MINK COCOA

CANARY ORANGE RED

DOVE

FOG

GREY MIX

CUMULUS CORNFLOWER

COBALT TWILIGHT

SMOKE BLACK

TWILIGHT BLACK

GLAZED PENNYROUNDS

WHITE DANDELION VANILLA JADITE CUMULUS CORNFLOWER

LATTE SAND MINK COCOA COBALT TWILIGHT

CANARY ORANGE RED SMOKE BLACK

DOVE

FOG

GREY MIX

3/8"x2 on 12 x 12" SheetWall & Floor Application

HERRINGBONE

3/8 x 2" on 12 x 12" SheetWall Application

STACK PENNYROUNDS

3/4" on 12 x 12" SheetWall & Floor Application

3/8x2 herringbone mosaicon 12x12 sheet

3/8”x2” rectangle mosaicon 12x12 sheet

3/4” pennyrounds mosaicon 12x12 sheet

*White & Black in all patterns available in gloss and matte finishes

GLAZED 1” HEXAGONCOLORS

WHITE* VANILLA LATTE

SAND MINK COCOA

CANARY ORANGE RED

DOVE FOG GREY MIX

CORNFLOWER

COBALT

BLACK*

*Available in matte or gloss finishes**Additonal colors available: twilight, jadite, smoke, cumulus and dandelion. Please contact sales representative for more information

1" on 12 x 12" SheetWall & Floor Application

GLAZED MOSAICS

6270 ASH STREET, VANCOUVER, BC, V5Z 3G9, CANADA, PH:604-639-7563; FX: 604-639-1814

GLAZED PORCELAIN TILESDocument Date: January 1, 2016

Porcelain Mosaics:

* All Testings were done to conform with European Standards* All Tiles are tested for suitability for wall and floor tiles.

ANSI. A137.1 FACTORYItem Requirement - Test Standard Test Result Remark

Method of Manufacture Dry Pressed TilesFactory production control ISO9001 Qualified

Dimensional and Surface Quality: 3% or 0.8mmLength ±0.8mm ±0.5mm PWidth ±0.8mm ±0.5mm PStraightness of sides ±1.8mm ±0.5mm PRectangularity ±1.8mm ±0.5mm PSmoothness ±0.8mm ±0.5mm P

Surface QualityVisible defects of surface min.95% defect free no defect was found PWater Absorption ≤0.5% ≤0.1% PBreaking Strength >250 LBF >285 LBF PModulus of Rupture ≥35 Mpa ≥39 Mpa PWearing Strength Less than 205mm³ Less than 140mm³Abrasion Resistance class IVThermal Linear Expansion Less than 9*10-6K-1 Less than 7*10-6K-1

Thermal Shock no defect found pCrazing Resistance no defect found PFrost Resistance no defect found PBond Strength ≥50 psi 133 psi PDYNAMIC Coefficient of Friction ≥0.42 0.5/0.6 PMoisture Expansion 0.0003Lead & Cadmium (ASTMC895) C<0.01; L<0.05 mg/LResistance to Staining class A PResistance to Chemicals Low Acids & Alkalis class A PResistance to Chemicals High Acids & Alkalis class A P

Test Information

GLAZED CERAMIC MOSAICS

V1

Uniform Appearance