www.jurchen-technology.com

Our successful module clip for frame-less glass-glass pv panels has been re-

engineered. The module clip MK-A HR II is the result of our manufacturing

know-how in close cooperation with multiple module manufacturers and so-

lar EPCs. The Smart Product Design enables a manufacturing with less raw

materials. As a result the MK-A HR II module clip is up to 35% lighter than

competitive products.

Smart installation - fast with no risks for damaged pv modules: An

additional assembly protection is given by the extended lower EPDM rubber

lip. During the 2-step installation process the PV modules will be set directly

on the rubber and slide into the pre-mounted clip. There is no contact with the

metal substructure.

Positive locking in contrast to force closure: The central connection point

(customized for different screws) and the protection bar below avoid a damage

through too high torques.

Proven millionfold with lowest fault rate* -In operation worldwide under extreme conditions

2

1 The extended lower special developed EPDM rubber lip

guarantees an easy and secure installation.

Practical protection bar avoids extreme torsional moments and

ensures the required clamping force permanently.

Benefits of MK-A HR II

New Product Design: Up to 35 % less weight

Smart and fast installation: EPDM rubber avoids installation

damages and ensures a secure hold with positive locking

Proven rock solid quality with 15 years product guarantee

Practical end stop to prevent glass module damages

Ready for 1,500V DC system voltage!

PV performance is optimized by shade-free screw connection

Compatible with many frame-less glass-glass pv modules;

certified by First Solar®

Optional anti-theft system

Attractive pricing

Glass-Glass Module clip MK-A HR II TYPE FS4

21

NEWFirst S

olar® FS4

clip rev. II

All data may subject to alterations and errors.

Be smart - use less raw material!

Rock solid quality - Made in Germany: The MK-A HR II module clip is

manufactured according to our strict quality management process. Jurchen Tech-

nology gives a 15 years product guarantee for it. The MK-A HR II provides a safe,

manufacturer certified hold of the First Solar® FS 4 pv module series.

* Operating experience of over 2.2 GWp PV capacity with fault rate lower than 0.05% per year (Source: First Solar)

SMART INSTALLATION WITH LESS MECHANICAL PARTS

LESS MATERIAL USAGE

PROVEN QUALITY IN OVER 2.2 GWp PV CAPACITY

Bestellhotline:(09369) 98229 - 660

Änderungen & Irrtümer vorbehalten.

2016-03-10_DE

1

A4Status Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name

09.03.2016 hermann.hasemann

33,5

80- 20+

18

14

Ø 9

402

/ 7

1

A4Status Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name

09.03.2016 hermann.hasemann

33,5

80- 20+

1814

Ø 9

402

/ 7

TEILELISTEWERKSTOFFBESCHREIBUNGBAUTEILNUMMERANZAHLOBJEKT

EN AW 6060 T66Modulklammer MK A II - HRA-0017-01.03.00.111EPDMEPDM First Solar 4 HRR-0007-0022

1 A4

Modulklammer MK A II - HR

C-0073-01Status Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name06.05.2015 Hasemann

Allgemein-toleranz DIN ISO

2768-mK

Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Kokurrenzfirmenzugänglich gemacht werden

OberflächenDIN EN ISO

1302

M1:1

80- 20+

402,0

50

18

14

50

9/ 7

22

TEILELISTEWERKSTOFFBESCHREIBUNGBAUTEILNUMMERANZAHLOBJEKT

EN AW 6060 T66Modulklammer MK A II - HRA-0017-01.03.00.111EPDMEPDM First Solar 4 HRR-0007-0022

1 A4

Modulklammer MK A II - HR

C-0073-01Status Änderungen Datum Name

Gezeichnet

Kontrolliert

Norm

Datum Name06.05.2015 Hasemann

Allgemein-toleranz DIN ISO

2768-mK

Diese Zeichnung darf ohne Genehmigung weder vervielfältigt noch dritten Personen oder Kokurrenzfirmenzugänglich gemacht werden

OberflächenDIN EN ISO

1302

M1:1

80- 20+

402,0

50

18

14

50

9/ 7

22

Module clip MK-A II HR MK-A HR II 80-7 FS4Item number: 06006607

MK-A HR II 80-9 FS4Item number: 06006667

Hole diameter Ø suitable for M6 M8Available length of the module clip* 80 mm

length tolerance DIN ISO 2768-1 +/- 1.5 mm80 mmlength tolerance DIN ISO 2768-1 +/- 1.5 mm

Possible module types First Solar® module series FS 2, FS 3 and FS 4 First Solar® module series FS 2, FS 3 and FS 4

Utilizable for the following laminate thickness 6.8 mm (± 0.1 mm) 6.8 mm (± 0.1 mm)

Main casting material Aluminum, weatherproof Aluminum, weatherproof

Insert material EPDM, UV-resistant and weatherproofelectrical resistance > 1 x 1014 Ohm * cm

EPDM, UV-resistant and weatherproofelectrical resistance > 1 x 1014 Ohm * cm

Shore hardness 55 Shore A ± 5 in the mounting area 55 Shore A ± 5 in the mounting area

Minimum support area ≥ 37 mm ≥ 37 mm

Usable as an edge clip without additional components

Yes Yes

Optional anti-theft system Yes Yes

Advanced protection bar for load spreading Yes Yes

Technical Data for MK-A HR II TYPE FS4

Cross section MK-A HR II M (module middle clip):

* Individual length possible accordingly

Optional: Cross section MK-A HR E (module end clip):

Hotline for orders:+49 9321 2680 600

All data may subject to alterations and errors.

2017-01-13_EN

Jurchen Technology GmbH

Steigweg 24, 97318 Kitzingen, Germany