Glass Brochure
-
Upload
crisanto-cabardo -
Category
Documents
-
view
215 -
download
0
description
Transcript of Glass Brochure
Head Office & Factory:P.O. Box 6674, Ras Al Khaimah, UAE
Tel +971 7 244 6114 / +971 7 243 2800 • Fax +971 7 244 6112website: www.cladtech-int.com • [email protected]
KSA:P.O. Box 18927 Riyadh, KSA
Tel.: +966 (1) 219 05 66 • Fax: +966 (1) 293 57 52
المكتب الرئيسي والمصنع:ص.ب : 6674 رأس الخيمة، اإلمارات العربية المتحدة
هاتف : 2800 243 7 971+ / 6114 244 7 971+الفاكس : 6112 244 7 971+
website: www.cladtech-int.com • [email protected]
المملكة العربية السعودية:ص.ب 18927 الرياض، المملكة العربية السعودية
هاتف : 0566 219 1 966+ الفاكس : 52 57 293 1 966+
أ. موقع على اإلنترنت
1 2
The area designated for glass processing is approximately 11.700 m2. The plant is equipped with well advanced and automated machinery for almost all glass processing requirements.All processes are, in addition, computer controlled to guarantee high efficiency and quality and reduce handling of the glass to a minimum level.
Each machine is equipped with automatic handling devices to maintain the highest quality.Production capacity of Insulated Glazed Units is up to 35,000 sqm per month.
The glass plant has a reverse osmosis water treatment plant which allows the re-utilization of 80% of the water, reducing daily consumption and providing quality water wash for high performance glass and, at the same time supporting the “environmentally friendly” philosophy of the Company.
The equipment available includes the following:
DESCRIPTION MAX. CAPACITY
• Cutting line 6,000 mm x 3,210 mm
• Automatic first arris 2,500 mm x 4,500 mm
• Tempering line 2,600 mm x 4,800 mm
• Laminating line 2,600 mm x 4,500 mm
• Heat Soak Testing Oven 3,000 mm x 5,000 mm
• Double glazing line 2,500 mm x 4,500 mm
• Integrated double edger
(drilling and washing) 2,500 mm x 5,000 mm
• Gemy 9C (for polishing) 2,000 mm x 3,000 mm
• V+ 1250 (For horizontal drilling) 2,000 mm x 3,000 mm
• SB10 (for round polish) Max 2,000 mm x 3,000 mm
GLASS DIVISION: OUR MACHINE GLASS DIVISION: OUR MACHINE
2
1 2
The area designated for glass processing is approximately 11.700 m2. The plant is equipped with well advanced and automated machinery for almost all glass processing requirements.All processes are, in addition, computer controlled to guarantee high efficiency and quality and reduce handling of the glass to a minimum level.
Each machine is equipped with automatic handling devices to maintain the highest quality.Production capacity of Insulated Glazed Units is up to 35,000 sqm per month.
The glass plant has a reverse osmosis water treatment plant which allows the re-utilization of 80% of the water, reducing daily consumption and providing quality water wash for high performance glass and, at the same time supporting the “environmentally friendly” philosophy of the Company.
The equipment available includes the following:
DESCRIPTION MAX. CAPACITY
• Cutting line 6,000 mm x 3,210 mm
• Automatic first arris 2,500 mm x 4,500 mm
• Tempering line 2,600 mm x 4,800 mm
• Laminating line 2,600 mm x 4,500 mm
• Heat Soak Testing Oven 3,000 mm x 5,000 mm
• Double glazing line 2,500 mm x 4,500 mm
• Integrated double edger
(drilling and washing) 2,500 mm x 5,000 mm
• Gemy 9C (for polishing) 2,000 mm x 3,000 mm
• V+ 1250 (For horizontal drilling) 2,000 mm x 3,000 mm
• SB10 (for round polish) Max 2,000 mm x 3,000 mm
GLASS DIVISION: OUR MACHINE GLASS DIVISION: OUR MACHINE
2
3 4
GLASS MACHINERY
FIRST ARRISINGAutomatic arrising of rectangles and shapes with straight
edges. Cup wheel technology for best arrising quality
at low operating costs. No contact with coated surface
of low-E glass. Wide application in tempered glass,
laminated glass, and insulating glass manufacturing.
TEMPERING LINEThe UGC heating system incorporates a fast responding
open coil heater design. Individual turbocharger units
located on the outside of the heating chamber re-circulate
oven air and provides individual convention control
for both glass surfaces, as the radiant heating system
deposits heat according to measured pattern. Glass is
heated very quickly but with a level of control that provides
exceptional glass quality.
HEAT SOAK TESTINGDuring the primary glass manufacturing process with the
float method some nickel sulphide inclusions can occur in
the glass. Variations in temperature increase the possibility
of a spontaneous breaking of the pane after tempering
when nickel sulphide is present thus causing potential
damage to people and property. In order to reduce the
risk of spontaneous breakage, the tempered glass should
undergo the Heat Soak Test process.
The glass is maintained at a 290˚C temperature for a fixed
period in order to accelerate the development of NiS
inclusions during the test and cause breakage prior to
delivery and installation.
GLASS MACHINERY
INSULATING GLASSHigh-tech and most advanced technology for insulated glass.
Capacity approx. 1500 sqm per day.
LAMINATING LINEQuality architectural laminated glass machine. Provides
high quality and durable laminated and multi-laminated
glass with high productivity.
EDGE – WORKING LINESProviding consistent quality and high productivity.
CUTTING-LINEThe glass cutting table is a high precision, high speed, low
noise, batch production machine used for cutting straight
and random shaped lines on flat glass. The CAD-CAM
software, with its powerful shape compiling feature and
optimization program, allows you to design your desired
shapes easily and quickly. The high-grade servomotors
and high-precision transmission modules are used to
increase the quality of glass shape.
3 4
GLASS MACHINERY
FIRST ARRISINGAutomatic arrising of rectangles and shapes with straight
edges. Cup wheel technology for best arrising quality
at low operating costs. No contact with coated surface
of low-E glass. Wide application in tempered glass,
laminated glass, and insulating glass manufacturing.
TEMPERING LINEThe UGC heating system incorporates a fast responding
open coil heater design. Individual turbocharger units
located on the outside of the heating chamber re-circulate
oven air and provides individual convention control
for both glass surfaces, as the radiant heating system
deposits heat according to measured pattern. Glass is
heated very quickly but with a level of control that provides
exceptional glass quality.
HEAT SOAK TESTINGDuring the primary glass manufacturing process with the
float method some nickel sulphide inclusions can occur in
the glass. Variations in temperature increase the possibility
of a spontaneous breaking of the pane after tempering
when nickel sulphide is present thus causing potential
damage to people and property. In order to reduce the
risk of spontaneous breakage, the tempered glass should
undergo the Heat Soak Test process.
The glass is maintained at a 290˚C temperature for a fixed
period in order to accelerate the development of NiS
inclusions during the test and cause breakage prior to
delivery and installation.
GLASS MACHINERY
INSULATING GLASSHigh-tech and most advanced technology for insulated glass.
Capacity approx. 1500 sqm per day.
LAMINATING LINEQuality architectural laminated glass machine. Provides
high quality and durable laminated and multi-laminated
glass with high productivity.
EDGE – WORKING LINESProviding consistent quality and high productivity.
CUTTING-LINEThe glass cutting table is a high precision, high speed, low
noise, batch production machine used for cutting straight
and random shaped lines on flat glass. The CAD-CAM
software, with its powerful shape compiling feature and
optimization program, allows you to design your desired
shapes easily and quickly. The high-grade servomotors
and high-precision transmission modules are used to
increase the quality of glass shape.
5 6
SOME AWARDED PROJECTS SOME AWARDED PROJECTS
Elite ResidenceDubai, UAE
Tamkeen TowerRiaydh, KSA
Princess TowerDubai, UAE
Imperial ResidenceDubai, UAE
Dubai MetroDubai, UAE
Jawharat Al Falak(Platini Tower)Jeddah, KSA
Aksai City PromezoneKazakhastan
Storage Warehouse, Office & Workshop
Seychelles
Yassat TowerAub Dhabi, UAE
Emirates Bank TowerAjman, UAE
Churchill TowerDubai, UAE
Trident TowerDubai, UAE
7 Star Al Hamra HotelRas Al Khaimah, UAE
The Wave, Oman
5 6
SOME AWARDED PROJECTS SOME AWARDED PROJECTS
Elite ResidenceDubai, UAE
Tamkeen TowerRiaydh, KSA
Princess TowerDubai, UAE
Imperial ResidenceDubai, UAE
Dubai MetroDubai, UAE
Jawharat Al Falak(Platini Tower)Jeddah, KSA
Aksai City PromezoneKazakhastan
Storage Warehouse, Office & Workshop
Seychelles
Yassat TowerAub Dhabi, UAE
Emirates Bank TowerAjman, UAE
Churchill TowerDubai, UAE
Trident TowerDubai, UAE
7 Star Al Hamra HotelRas Al Khaimah, UAE
The Wave, Oman
7
Glass Division: Interior قسم الزجاج: المصنع
7
بعض المشاريع الممنوحة
Storage Warehouse, Office & Workshop
Seychelles
Yassat TowerAub Dhabi, UAE
Emirates Bank TowerAjman, UAE
Churchill TowerDubai, UAE
Trident TowerDubai, UAE
7 Star Al Hamra HotelRas Al Khaimah, UAE
The Wave, Oman
بعض المشاريع الممنوحة
Elite ResidenceDubai, UAE
Tamkeen TowerRiaydh, KSA
Princess TowerDubai, UAE
Imperial ResidenceDubai, UAE
Dubai MetroDubai, UAE
Jawharat Al Falak(Platini Tower)Jeddah, KSA
Aksai City PromezoneKazakhastan
56
بعض المشاريع الممنوحة
Storage Warehouse, Office & Workshop
Seychelles
Yassat TowerAub Dhabi, UAE
Emirates Bank TowerAjman, UAE
Churchill TowerDubai, UAE
Trident TowerDubai, UAE
7 Star Al Hamra HotelRas Al Khaimah, UAE
The Wave, Oman
بعض المشاريع الممنوحة
Elite ResidenceDubai, UAE
Tamkeen TowerRiaydh, KSA
Princess TowerDubai, UAE
Imperial ResidenceDubai, UAE
Dubai MetroDubai, UAE
Jawharat Al Falak(Platini Tower)Jeddah, KSA
Aksai City PromezoneKazakhastan
56
7
Glass Division: Interior قسم الزجاج: المصنع
7
أالت الزجاج :
مكائن تنعيم احلواف
مكائن تستعمل لتنعيم حواف الزجاج مربع الشكل و المضلعتستعمل فيها تقنية االقراص المدورة للحصول على افضل تنعيم Low( باقل كلفة هذة التقنية تحافض على سطح الزجاج الحساسE(حيث يعالج الزجاج بدون مالمسة االيدي وهذة التقنية تستخدم الطبقي الزجاج الحرارية للزجاج الحساس وعمل المعالجة ايضا فى
األمين والزجاج المزدوج
خط املعاجلة احلرارية
تيارات بنظام يعمل يونيجالس شركة من الحرارية المعالجة خط الحمل الحراري والتي تهئ استجابة سريعة داخل الفرن. كما يعمل
االشعاع الحراري على ايصال الحرارة لكامل سطح الزجاج
فرن اختبار املعاملة احلرارية
خالل عملية تصنيع الواح الزجاج بطريقة الطفو على القصدير الذائب الزجاج لوح داخل تترسب ان ممكن سلفايت النيكل ابخرة فإن عشوائي كسر الى يؤدي ان ممكن الحراة درجات اختالف الذائب. للوح الزجاج بعد عملية المعالجة الحرارية مما قد يسبب خسائر في األرواح واألموال. من أجل تقليل مخاطر التكسير العشوائي فيجب اجراء اختبار وجود النيكل سلفايت بوضع الزجاج بأفران خاصة يتم لتعجيل محددة لفترة مئوية درجة 290 تبلغ حرارة تهيئة خاللها عملية خالل الزجاج تكسر الى يؤدي مما سلفايت النيكل تأثير
األختبار وقبل تسليم الزجاج وتثبيته.
أالت الزجاج :
الزجاج املزدوج
1500 متر مربع المزدوج بسعة الزجاج تقنية عالية ومتطورة لعمل في اليوم
(الزجاج االمني (متعدد الطبقات يستعمل الزجاج المتعدد الطبقات في البنايات الحديثة ويكون
.بجودة عالية وضمان طويل األمد وبانتاجية عالية
خطوط صقل احلواف
توفر نوعية ذات جودة ممتازة بأنتاجية عالية
خط التقطيع
طاولة خط التقطيع عالية الدقة والسرعة وذات صوت منخفض .مستطيلة اشكال على الزجاج الواح لتقطيع الماكينة وتستخدم
أو مضلعةبالماكنة الملحق بالكومبيوتر المجهز CAD-CAM برنامج ان تصميم امكانية يتيح مما مختلفة اشكال تقطيع على يعمل
االشكال بسهولة وسرعةفي عالية دقة تتيح الماكنة محركات عمل في المؤازرة األلية إن
التقطيع ألنتاج األشكال الهندسية المختلفة
34
أالت الزجاج :
مكائن تنعيم احلواف
مكائن تستعمل لتنعيم حواف الزجاج مربع الشكل و المضلعتستعمل فيها تقنية االقراص المدورة للحصول على افضل تنعيم Low( باقل كلفة هذة التقنية تحافض على سطح الزجاج الحساسE(حيث يعالج الزجاج بدون مالمسة االيدي وهذة التقنية تستخدم الطبقي الزجاج الحرارية للزجاج الحساس وعمل المعالجة ايضا فى
األمين والزجاج المزدوج
خط املعاجلة احلرارية
تيارات بنظام يعمل يونيجالس شركة من الحرارية المعالجة خط الحمل الحراري والتي تهئ استجابة سريعة داخل الفرن. كما يعمل
االشعاع الحراري على ايصال الحرارة لكامل سطح الزجاج
فرن اختبار املعاملة احلرارية
خالل عملية تصنيع الواح الزجاج بطريقة الطفو على القصدير الذائب الزجاج لوح داخل تترسب ان ممكن سلفايت النيكل ابخرة فإن عشوائي كسر الى يؤدي ان ممكن الحراة درجات اختالف الذائب. للوح الزجاج بعد عملية المعالجة الحرارية مما قد يسبب خسائر في األرواح واألموال. من أجل تقليل مخاطر التكسير العشوائي فيجب اجراء اختبار وجود النيكل سلفايت بوضع الزجاج بأفران خاصة يتم لتعجيل محددة لفترة مئوية درجة 290 تبلغ حرارة تهيئة خاللها عملية خالل الزجاج تكسر الى يؤدي مما سلفايت النيكل تأثير
األختبار وقبل تسليم الزجاج وتثبيته.
أالت الزجاج :
الزجاج املزدوج
1500 متر مربع المزدوج بسعة الزجاج تقنية عالية ومتطورة لعمل في اليوم
(الزجاج االمني (متعدد الطبقات يستعمل الزجاج المتعدد الطبقات في البنايات الحديثة ويكون
.بجودة عالية وضمان طويل األمد وبانتاجية عالية
خطوط صقل احلواف
توفر نوعية ذات جودة ممتازة بأنتاجية عالية
خط التقطيع
طاولة خط التقطيع عالية الدقة والسرعة وذات صوت منخفض .مستطيلة اشكال على الزجاج الواح لتقطيع الماكينة وتستخدم
أو مضلعةبالماكنة الملحق بالكومبيوتر المجهز CAD-CAM برنامج ان تصميم امكانية يتيح مما مختلفة اشكال تقطيع على يعمل
االشكال بسهولة وسرعةفي عالية دقة تتيح الماكنة محركات عمل في المؤازرة األلية إن
التقطيع ألنتاج األشكال الهندسية المختلفة
34
تبلغ مساحة األرض المخصصة ألعمال الزجاج 11700 متر مربعالمصنع مجهز بجميع المكائن األوتوماتيكية المتطورة لجميع انواع
التشغيل على الزجاج
في مربع متر 35000 حوالي المزدوج الزجاج لخط األنتاجية الطاقة الشهر
لغرض لمياه اوتحلية لتنقيه التقنية عالي بجهاز المصنع ان كما ويقلل المياه من 80% استخدام اعادة يتيح مما الزجاج غسل االستهالك اليومي ويوفر مياه عالية الجودة لغسل الزجاج ذو الطالء طريق عن للبيئة صدبق المصنع يكون الوقت وبنفس الحساس
تقليل النفايات.
يحتوي المصنع على خطوط مكائن التشغيل التالية
سعة الخط وصف الخط
mm x 3,210 mm 6,000 خط التقطيع •
mm x 4,500 mm 2,500 مكائن تنعيم الحواف •
mm x 4,800 mm 2,600 خط المعالجة الحرارية •
mm x 4,500 mm 2,600 خط عمل طبقات الزجاج األمين •
mm x 5,000 mm 3,000 فرن اختبار الزجاج المعالج حراريا •
mm x 4,500 mm 2,500 خط الزجاج المزدوج •
خط صقل الحواف المتكامل •
mm x 5,000 mm 2,500 )صقل الحواف و التثقيب االفقى(
mm x 3,000 mm 2,000 ماكنة صقل الحواف العمودى •
mm x 3,000 mm 2,000 ماكنة التثقيب العمودية •
Max 2,000 mm x 3,000 mm ماكنة تدوير الزوايا •
قسم الزجاج: االليات قسم الزجاج: االليات
13 12
تبلغ مساحة األرض المخصصة ألعمال الزجاج 11700 متر مربعالمصنع مجهز بجميع المكائن األوتوماتيكية المتطورة لجميع انواع
التشغيل على الزجاج
في مربع متر 35000 حوالي المزدوج الزجاج لخط األنتاجية الطاقة الشهر
لغرض لمياه اوتحلية لتنقيه التقنية عالي بجهاز المصنع ان كما ويقلل المياه من 80% استخدام اعادة يتيح مما الزجاج غسل االستهالك اليومي ويوفر مياه عالية الجودة لغسل الزجاج ذو الطالء طريق عن للبيئة صدبق المصنع يكون الوقت وبنفس الحساس
تقليل النفايات.
يحتوي المصنع على خطوط مكائن التشغيل التالية
سعة الخط وصف الخط
mm x 3,210 mm 6,000 خط التقطيع •
mm x 4,500 mm 2,500 مكائن تنعيم الحواف •
mm x 4,800 mm 2,600 خط المعالجة الحرارية •
mm x 4,500 mm 2,600 خط عمل طبقات الزجاج األمين •
mm x 5,000 mm 3,000 فرن اختبار الزجاج المعالج حراريا •
mm x 4,500 mm 2,500 خط الزجاج المزدوج •
خط صقل الحواف المتكامل •
mm x 5,000 mm 2,500 )صقل الحواف و التثقيب االفقى(
mm x 3,000 mm 2,000 ماكنة صقل الحواف العمودى •
mm x 3,000 mm 2,000 ماكنة التثقيب العمودية •
Max 2,000 mm x 3,000 mm ماكنة تدوير الزوايا •
قسم الزجاج: االليات قسم الزجاج: االليات
13 12
Head Office & Factory:P.O. Box 6674, Ras Al Khaimah, UAE
Tel +971 7 244 6114 / +971 7 243 2800 • Fax +971 7 244 6112website: www.cladtech-int.com • [email protected]
KSA:P.O. Box 18927 Riyadh, KSA
Tel.: +966 (1) 219 05 66 • Fax: +966 (1) 293 57 52
المكتب الرئيسي والمصنع:ص.ب : 6674 رأس الخيمة، اإلمارات العربية المتحدة
هاتف : 2800 243 7 971+ / 6114 244 7 971+الفاكس : 6112 244 7 971+
website: www.cladtech-int.com • [email protected]
المملكة العربية السعودية:ص.ب 18927 الرياض، المملكة العربية السعودية
هاتف : 0566 219 1 966+ الفاكس : 52 57 293 1 966+
أ. موقع على اإلنترنت