G:IB pictureLDVD,LCD IBLDVD2 - Cosmo … not use this product near water-for example,near a bath...

1

LDVD2210W22’’ LCD TVUser Guide

THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

DIAGONAL

LDVD2212NH V36+NTSC+DVD IB 12402-11.p65 ?2010/4/15, 下午 01:561

32

PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT.WARNINGTo reduce the risk of fire or electric shock, do not expose this product to rain or moisture.The apparatus should not be exposed to dripping or splashing and no objects filled with liquids,such as vases, should be placed on the apparatus.Air flow to the unit should not be impeded by covering the ventilation openings with items, such asnewspapers,table-cloths, curtains, etc.No open flame sources, such as lighted candles, should be placed on the apparatus.CAUTIONTO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH ANY EXTENSIONCORD, RECEPTACLE OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTEDWITHOUT EXPOSING ANY PARTS OF THE BLADES.TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE, THE DISCONNECT DEVICE SHOULDREMAIN READILY OPERABLE.IN ORDER TO DISCONNECT THE APPARATUS FROM THE MAINS COMPLETEY, THE MIANS PLUGSHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.

COMPLIANCE WITH FCC REGULATIONSThis equipment has been tested and to comply with the limits for a Radio Receiver,pursuant toPart 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference willnot occur in a particular installation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.• Consult the dealer or an experienced radio technician for help.

SAFETY PRECAUTIONS

The lightning flash with arrowheadsymbol, within an equi lateraltriangle, is intended to alert theuser to the presence of uninsulated“dangerous voltage”within the product’s enclosureth a t m a y b e o f s u f f i c i e n tmagnitude to constitute a risk ofelectric shock to persons.

WARNING: TO REDUCE THERISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR

BACK). NO USER-SERVICE-

ABLE PARTS INSIDE, REFERSERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an

equilateral triangle is intended

to alert the user to presence ofi m p o r tan t o p e r a t i n g an d

m a i n t e n anc e ( s e r v i c i n g )

ins truct ions in the l i terature

accompanying the appliance.

Caution: changes or modif ications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

SAFETY CERTIFICATIONThis equipment is made and tested to meet safety standards of the FCC, requirements and

compliance with safety performance of the U.S. Department of Health and Human Services,

and also with FDA Radiation Performance Standards 21 CFR Subchapter J.

IMPORTANT SAFETY INSTRUCTIONSBefore using this unit, be sure to read all operating instructions carefully. Please note that these

are general precautions and may not pertain to your unit.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all Instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.

Install in accordance with manufacturer’s instructions.

8. Do not install near any heat source such as radiators, heat registers, stoves,or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades

and a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obolete

outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by the manufac

turer or sold with the apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tipover.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as if the power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, or when the

apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

LDVD2212NH V36+NTSC+DVD IB 12402-11.p65 ?2010/4/15, 下午 01:562-3

54

IMPORTANT SAFETY INSTRUCTIONS15. Retain Instructions

The safety and operating instructions should be retained for future reference.16. Water and Moisture

Do not use this product near water-for example,near a bath tub,wash bowl,kitchen sink,or laundry tub,in a wet basement,or near a swimming pool and the like.

17. Power SourcesThe product should be operated only from the type of power source indicated on themarking label. If you are not sure of the type of power supply to your home, consult yourproduct dealer or local power company. For products intended to operate from batterypower, or other sources, refer to the operating instructions.

18. Grounding or PolarizationThis product may be equipped with a polarized alternating-current line plug (a plug havingone blade wider than the other). This plug will fit into the power outlet only one way. Thisis a safety feature. If you are unable to insert the plug fully into the outlet, try reversing theplug. If the plug should still fail to fit, contact your electrician to replace your obsoleteoutlet. Do not defeat the safety purpose of the polarized plug. Alternative Warnings -Thisproduct is equipped with a three-wire grounding-type plug, a plug having a third (grounding)pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. Ifyou are unable to insert the plug into the outlet, contact your electrician to replace yourobsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

19. Outdoor Antenna GroundingIf an outside antenna or cable system is connected to the product, be sure the antenna orcable system is grounded so as to provide some protection against voltage surges andbuilt-up static charges. Article 810 of the National Electrical Code, ANSI/ NFPA 70, providesinformation with regard to proper grounding of the mast and supporting structure,grounding of the lead-in wire to antenna discharge unit, size of grounding conductors,location of antenna discharge unit, connection to grounding electrodes, and requirementsfor the grounding electrode. See fig. A on page 6.

20. LightningFor added protection for this product during a lightning storm, or when it is left unattendedand unused for long periods of time,unplug it from the wall outlet and disconnect theantenna or cable system. This will prevent damage to the product due to lightning andpowerline surges.

21. Power LinesAn outside antenna system shouldn’t be located in the vicinity of overhead power lines orother electric light or power circuits, or where it can fall into such power lines or circuits.When installing an outside antenna system, extreme care should be taken to keep fromtouching such power lines or circuits as contact with them might be fatal.

22. OverloadingDo not overload wall outlets, extension cords, or integral convenience receptacles as thiscan result in a risk of fire or electric shock.

IMPORTANT SAFETY INSTRUCTIONS23. Object and Liquid Entry

Never insert objects of any kind into this product through openings as they may touchdangerous voltage points or short-out parts that could result in a fire or electric shock.Never spill liquid of any kind on the product.Do not attempt to service the product yourself as opening or removing covers may exposeyou.

24. Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualified service personnelunder the following conditions:a. When the power-supply cord or the plug is damaged,b. If liquid has been spilled, or objects have fallen into the product,c. If the product has been exposed to rain or water,d. If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often requireextensive work by a qualified technician to restore the product to its normal operation,

e. If the product has been dropped, or damaged in any way,f . When the product exhibits a distinct change in performance-this indicates a need for

service.25. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the originalpart. Unauthorized substitutions may result in fire, electric shock, or other hazards.

26. Safety CheckUpon completion of any service or repairs to this product, ask the service technician toperform safety checks to determine that the product is in proper operating condition.

27. Nonuse PeriodThe power cord of the application should be unplugged from the outlet when left unusedfor a long period of time.

28. Note To CATV System InstallerThis reminder is provided to call the CATV system installer’s attention to Article 820-40 ofthe NEC that provides guidelines for proper grounding and, in particular, specifies that thecable ground shall be connected to the grounding system of the building, as close to thepoint of cable entry as practical.


76

IMPORTANT SAFETY INSTRUCTIONS

a. Use No.10AWG(5.3mm2)copper,No.8 AWG(8.4mm2)aluminum,No.17AWG(1.0mm2)

copper-clad steel or bronze wire,or larger,as a ground wire.

b. Secure antenna lead-in and grounding wires to house with insulators spaced from

4-6 feet(1.22-1.83m)apart.

c. Mount antenna discharge unit as close as possible to where lead-in enters house.

d. Use jumper wire not smaller than No.6AWG(13.3mm2)copper,or the equivalent, when a

separate antenna grounding electrode is used.

FIGURE AEXAMPLE OF ANTENNAGROUNDING ACCORDING TONATIONAL ELECTRICAL CODEINSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONSON PLACEMENT• Do not use the unit in places which are extremely hot, cold, dusty or humid.

• Place the unit on a flat and even surface.

• Do not restrict the air-flow of the unit by placing it in a place with poor ventilation, by

covering it with a cloth or by placing it on a carpet.

ON CONDENSATION• When left in a heated room where it is warm and damp, water droplets or condensation

may form inside the unit.

• When there is condensation inside the unit, the unit may not function normally.

• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and

dry the unit before use.

CAUTION:Remove AC plug from wall outlet and batteries from battery compartment of the remote control

when the unit will not be used for a prolonged period.

HIGH VOLTAGE:Live parts are accessible when the rear cover is removed.

Please read IMPORTANT SAFETY INSTRUCTIONS

Excessive sound pressure from earphones and headphones can cause hearing loss .

NOTES:- Periodically inspect for damage, if damaged properly repair the TV before use.

- Adult supervision recommended.


98

Location of Controls

Front View

1. Speaker

2. Stand base

3. Power indicator

4. Remote Sensor

Side View

1. Power Button

2. Channel up/down Buttons

3. Volume up/down Buttons

4. Menu Button

5. Input Button

6. Headphone Jack

7. Eject Button(DVD)

8. Play/Pause Button(DVD)

9. Stop Button(DVD)

10. DVD Tray

Invisible laser radiation when open

and interlock fai led or defeated.Avoid direct exposure to laser beam.

LASER SAFETY

This unit employs an optical laser beam system in the CD

mechanism, designed with built in safeguards. Do not attempt todisassemble, refer to qualified service personnel.

Exposure to this invisible laser light light beam may be harmful

to the human eye.

THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS,OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER

LIGHT BEAM EXPOSURE.

This product incorporates copyright protection technology that is protected by U.S.patents

and other intellectual property rights. Use of this copyright protection technology must be

authorized by Macrovision, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision. Reverse engineering or disassembly is

prohibited.

Manufactured under license from Dolby Laboratories “ Dolby ”, “ Pro Logic ” and the double-D

symbol are trademarks of Dolby Laboratories. Confidential unpublished works.© 1992-1997

Dolby Laboratories, lnc. All rights reserved.

REGION MANAGEMENT INFORMATION

This DVD player is designed and manufactured to respond to the Region Management Informa-

tion that is recorded on a DVD disc. If the Region number describe on the DVD disc does not

correspond to the Region number of this DVD player, this DVD player cannot play that disc.

The Region number of this DVD player is

DANGER

Important Safety Instructions


1110

Location of Controls

Rear View

1. AC Cord

2. HDMI 1 Input

3. Component Input

4. S-Video Input

5. PC Input

6. Rear AV Output

7. Rear AV Input

8. 75 ohm Antenna Socket


1312

Remote Control1. button

2. Zoom button

3. Sleep button

4. Numeric buttons

5. Swap button

6. Menu button

7. Enter button

8. Mute button

9. Volume Up/Down button

10. P.Model button

11. TV/DVD button

12. Program button

13. DVD Menu button

14. Repeat button

15. Setup button

16. Stop( ) button

17. Play/Pause( ) button

18. Eject button

19. Display button

20. Input button

21. CCD button

22. Exit/Clear button

23. Navigation( / / / ) button

24. Channel Up/Down button

25. S.Model button

26. Audio button

27. Search button

28. Subtitle button

29. Prev.( ) button

30. Next( ) button

31. Fast Forward( ) button

32. Fast Backward( ) button

You can enjoy picture, sound and a PC monitor by connecting a DVD player, video game system

or computer to the inputs located on the rear of the LCD TV set.

• For the cable, use a commercially available audio/video cable.

• For more information about external device connections, see the operation manuals of your

external devices.

• Make sure that the corresponding cables are connected to each input. Connecting other

cables may result in a malfunction.

• VIDEO and S-VIDEO inputs: If your external device has an S-VIDEO output, S-VIDEO

connection is recommended. S-video provides a finer, more detailed picture. If inputs are

connected, S-VIDEO input takes a priority.

• Component Input (YPbPr): Picture can be displayed only when a 480I or 480P signal is

received.

External Device Connections


1514

Changing Channels• Press the "CH / " buttons to change the higher or lower stored channel.• Press the numeric button “0~9” to direct select the channels.To return back the previous channel viewed• Press the “SWAP” button to review the previous watching channel.To review the on screen informations• Press the “DISPLAY” button on the remote control to display channel information. When you press this button, it will display a channel number and related information on screen.To turn on or turn off the close caption• Press the “CCD” button to turn ON or turn OFF close caption function.To change the picture effect• Press the “P.MODEL” button to select the picture effect.

• User

• Standard

• Dynamic

• Mild

To change the sound effect• Press the “S.MODEL” button to select the sound effect.

• User

• Standard

• Music

• Movie

To set the sleep time• Press the “SLEEP” button to select a predetermined time the TV will turn off. The sleep

time can be set to count down from 10 to 240 minutes.To mute the sound• Press the “ ” button to swich OFF the sound, press once again to switch ON the sound.To change the screen aspect ration• Press the “ZOOM” button to change the aspect ratio of picture size.

• Full

• 4:3

• Original

• Zoom

To select Input mode• Press the “INPUT” button to select Source Model.AUTO POWER OFF If no signal is continuously detected from the antenna or broadcasting for more than 10 minutes, the TV will power-off automatically.

Using Remote ControlInserting Remote Control Batteries

Battery Disposal

Please ensure batteries are disposed of safely. Never dispose of batteries in the fire or with house-

hold waste. Check with your local authority for disposal regulations.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such

as sunshine, fire or the like.

CAUTION

• Do not attempt to recharge, short-circuit, disassemble, heat or throw the batteries into the

fire.

• Placing with wrong or mixed polarities batteries will result in damage to the batteries and

/or may result in a malfunction of the unit.

• Do not mix old and new batteries.

• Dispose of batteries properly in accordance with local law.

• Do not mix alkaline, standard (carbon-zinc),or rechargeable (nickel-cadmium) batteries.

On the back of the remote control, push down the catch on the battery compartment cover and

lift to remove it.

Insert the two AAA batteries supplied, ensuring that you follow the polarity diagram inside the

battery compartment.

Refit the cover.


1716

Operating Your TV

2. Adjusting Video SettingsYou may wish to adjust the video settings(e.g. contrast or color) to obtain the best picture. Todo so, follow these directions:• Press the “MENU” button and press the " / " button to select “PICTURE” menu.

• Press the " / " button to select the function to be adjusted.• Press the " / " button to adjust the level of the selected function.• Press the “MENU” button to exit.

Adjusting Audio settings• Press the “MENU” button and press the “ / ”

button to highlight AUDIO.

• Press the “ / ” button to highlight desired

item which you want to adjust, then

press the “ / ” button to change the

parameter of selected item.

• Sound Model: User, Standard, Music,

Movie.

• Treble

• Bass

• Balance

• AVC

• Press the “MENU” button one or more times to

close the menu.

Operating Your TVOnce you have connected your TV to an antenna or cable system, plugged the TV in, and putbatteries in the remote, you are ready to use the TV. The first thing you should do is programyour TV so it memorizes available channels.

Turning Your TV OnTo turn your TV ON, press the “ ” button on the remote control. You can also use the “ ”button on the front panel. Make sure your TV is plugged in before you try to turn it on.

Programming Your TV’s Channel Memory

Your TV’s memory determines the channels that are available using the "CH / " buttons. If a

channel is not in memory. you can tune to it with the number buttons, but not with the

"CH / " buttons. Follow these steps to program your TV’s memory:

1. Auto Search• Press the “MENU” button and then press the

" / " button to select “SEARCH” menu.

To memorize AIR channels• Press the " / " to highlight “Reception” then press the " / " button to select desire “Air”.• Press the " / " button to highlight “Auto Install” then press the " " to begin.• When finished memorizing the channels it will return to normal TV viewing.

To memorize cable channels• Press the " / " to highlight “Reception” then press the " / " button to select desire “cable”.• Press the " / " button to highlight “Auto Install” then press the " " to begin.• When finished memorizing the channels, it will return to normal TV viewing.

SkipIf the tuning process has stored some channels that you do not use, these channels can beskipped, so that they do not appear when you use the " / " button. The only way to view askipped channel is to use the numeric buttons to select the channel number.• Press the " / " to highlight “Skip” then press the " / " to select “On” or “Off”.


1918

Operating Your TV

5. Adjusting PC SettingsThe input signal format is recommended as 640x480, 800x600, 1024 x 768 @ 60Hz only, and

1024x768 @ 60Hz, If input signal frequency is higher than 60Hz the picture display may be

abnormal.

• Press the “INPUT” button to select PC Model

• Press the “MENU” button and press the “ / ”

button to highlight “SCREEN”.

• Press the “ / ” button to highlight desired item

which you want to adjust, then press the

“ / ” button to change the parameter of

selected item.

• H-Position

• V-Position

• Phase

• Clock

• Auto Config.

To change the aspect ratio of screen

• Press the “ / ” button to select “Zoom Model”.

• Press the “ / ” button to change the screen aspect ratio.

• Press the “MENU” button one or more times to close the menu.

Auto StandbyThe TV can be switch off automatically when useris not press any of control buttons on the remotehandset or unit. The time setting of Auto Standby is4 hours, 6 hours, 8 hours.

Factory DefaultFactory Default will restore the Factory setting.Be careful when using this function, because it willerase all the data and parameters that are set earlierin the receiver. Once user made a factory default,they will have to re-install their preferences.This option will bring back all the user given settingsto the default values. All the stored Channels will beremoved from the database. All the current user set-tings will be restored.

Changing the blue background• When there is no TV reception, you can avoid the “snow”background on the screen by selecting “Blue Screen” from the menu.• Press the " / " button to select “Blue Screen” then press the " / " button to select the Blue Background “On” or “Off”.• Press the “MENU” button to exit.

To set closed caption

ATV program might be providing more than one set of captions or one set of text.

• Press the " / " button to select “Closed Caption”.

• Press the " / " button to select the desire caption Channel(CC1, CC2, CC3, CC4,

TEXT1,TEXT 2, TEXT 3, TEXT 4).

4. Additional FeaturesThis section contains descriptions of the more advanced features of your TV.Changing the Language of the On-screen MenusYou can choose to display the on-screen menus in English, Spanish or French .To change the on-screen language:• Press the “MENU” button and press the " / " button to select “SETUP” menu.

• Press the " / " button to select “Menu Language”.• Press the " / " button to select the desired language.• Press the “MENU” button to exit.

CaptioningMany TV shows contain “Closed Caption”. These captions are hidden words that can bedisplayed on your TV screen. There are two types of these words: “caption” usually followthe action on-screen, providing a written version of the dialogue, narration and sound effects.“Text” is not usually related to the action on-screen, often providing information such as newsor weather.

CC Mode• Press the " / " button to highlight “CC Mode”, then press the " / " button to select “Off”, “On” or “CC on mute”.

Operating Your TV


2120

DVD player operation,continued1. GENERAL SETUP PAGE

In STOP mode press the SETUP button and highlight Gen-

eral setup then press the ENTER button to confirm.

Select the desired item by using the direction / , /

button. Always press the ENTER button to confirm the

selection.

TV Display

• Normal/PS

This is selected when the DVD player is connected to a

normal (4:3) TV. Wide-screen images are shown on the

screen but with the sides clipped so the full height of the

screen is filled.

• Normal/LB

This is selected when the player is connected to a normal

TV. W ide-screen images are shown on the screen, but

with a black bar on the top and bottom.

• Wide

This is selected when the player is connected to a wide-

screen TV.

OSD Language

This used to select the OSD language.

- English

- French

- German

- Spanish

- Italian

Screen Saver

Start the screen saver, the screen saver image appears

when the player stops or the image is frozen for a few

minutes. This saver will keep the screen from being

damaged.

• On (Enable the screen saver).

• Off (Disable the screen saver).

- - General Setup Page - -

TV Display LB

OSD Lang ENG

Screen Saver On

TV Mode P-Scan

Go To General Setup Page


TV Display LB Normal/PS

OSD Lang ENG Normal/LB

Screen Saver On Wide

TV Mode P-Scan

Set TV Display Mode


TV Display LB

OSD Lang ENG

Screen Saver On

Screen Saver

On

OffTV Mode P-Scan


TV Display LB

OSD Lang ENG

Screen Saver On

Set OSD Language

English

French

German

Spanish

Italian

TV Mode P-Scan

Playing Disks

1. Place the Disc in to the disc slot.

The label side should be facing frontward. For a Double-sided DVD Disc, put the disc with

label A/1 up.

2. The Disc will be played automatically.

• If it is a DVD disc, it will show the Menu/Title Page on the screen.

• If it is a CD, it will play the first track directly.

3. Press the “STOP” button if you want to stop the Disc playback You can resume playback

by pressing the “PLAY” button and it will start at the location where you pressed stop

(Resume Play).

4. Press the “STOP” Button twice to completely stop the DVD.

DVD Setup Mode

• Setup Mode provides a menu for the configuration of general setup page, audio setup page,

preference page, exit setup page.

To enter the SETUP Menu press the “SETUP” button on the remote control.

The full setup menu is only available if the DVD is in the stop mode. If a DVD is playing,

and SETUP is selected, certain menu items will be greyed out and unavailable.

The available menu items depend on whether the DVD is in the prestop or play mode.

• Item selection in the SETUP menu is done by using the “NAVIGATION” buttons and the

“ENTER” button.

• To exit the SETUP mode, press the “SETUP” button again or select the EXIT SETUP and press

the “ENTER” button.

Basic Operation

1. Switch the unit out of standby by pressing the “STANDBY” button then press the “SOURCE”

button on the unit or press the “TV/DVD” button on the remote handset to turn DVD mode to

"ON".

2. Place a disk insert to the disc slot.

• Hold the disc without touching either of its surfaces,

position it with the printed title side frontward.

3. Press the “EJECT”button to eject the disc from disc

slot.

Note:

• The disc will load into slot again after 30 seconds

without taking out the disc from the disc slot.

• Suggest on take out the disc after disc is ejected,

otherwise the same disc cannot load into disc slot

by pressing the disc.

DVD Player Operation


2322

DVD player operation,continued3. PREFERENCE SETUP PAGEIn STOP mode press the SETUP button and highlight prefer-

ence setup then press the ENTER button to confirm.

Select the desired item by use the direction / , /

button. Always press the ENTER button to confirm the

selection.

AudioIf a language listed below is recorded on the disc, youcan play the sound in such language. If not, the lan-guage recorded will be used.- English- French- German- Spanish- ItalianSubtitleIf a language listed below is recorded on the disc, youcan set the subtitle to be displayed in such language. Ifno language is selected, the subtitles will not be displayed.- English- French- German- Spanish- Italian- OffDisc MenuIf a language listed below is recorded on the disc, youcan set the Menu to be displayed in such language. Ifnot, the language recorded will be used.- English- French- German- Spanish- ItalianDefault

User can load the original factory settings by choosing

RESET and pressing the “ENTER”button.

- Reset

4. EXIT SETUP PAGEExit SetupHighlight EXIT SETUP then press the “ENTER” button toexit the SETUP menu.

- - Exit Setup Page - -

Exit Setup

Exit Setup Menu

- - Preference Page - -

Audio ENG

Subtitle ENG

Disc Menu ENG

Default

Preferred Audio Language

English

French

German

Spanish

Italian

English

French

German

Spanish

Italian

Off


Audio ENG

Subtitle ENG

Disc Menu ENG

Default

Preferred Subtitle Language

English

French

German

Spanish

Italian


Audio ENG

Subtitle ENG

Disc Menu ENG

Default

Preferred Menu Language


Audio ENG

Subtitle ENG

Disc Menu ENG

Default

Load Factory Setting

Reset

DVD player operation,continuedTV ModeThis setting allows you to select the vide signalbetween Interlace and P-Scan (progressive scan).• Interlace• P-Scan

2. AUDIO SETUP PAGEIn STOP mode press the SETUP button and highlight Audiosetup then press the ENTER button to confirm.Select the desired item by using the direction / , /button. Always press the ENTER button to confirm the

selection.

Speaker Setup

• LT/RT

If a disc is recorded with a multi channel sound track, the outputsignal will be incorporated to the left and right channel.

• StereoIf a disc is recorded with a multi channel sound track, the outputsignal will be incorporated to stereo.


TV Display LB

OSD Lang ENG

Screen Saver On

Set OSD Language

- - Audio Setup Page - -

Speaker Setup STR LT/RT

Go To Speaker Setup Page

Stereo

TV Mode P-Scan Interlace

P-Scan


2524

Repeat Mode

This function is applicable for DVD and CD audio but with different effects.

• For DVD disc playback, user can choose to repeat the current chapter,the current title or disc.

Subsequent key press of the “REPEAT” button can change between these four options.

• For CD, user can choose to repeat the current track or the whole disc (Repeat All). Subse-

quent key press of the “REPEAT” button can change between these three options.

Subtitle

This function is only applicable for DVD discs. It can change the subtitle language shown on the

screen.

Note : Number of subtitles available depends on the DVD disc.

Search

This function is applicable for DVD and CD audio. Through this function, the user can access a

specific location or a specific track by keying in the target time or the track number.

1. Press the “SEARCH” button enter to search mode .

2. Input the target time with the “NUMBER” button (0~9) and the player will jump to the target

location immediately.

DVD player operation,continuedDVD MenuThe DVD Menu Play function is only applicable for DVD movies. User can access the castinginformation, production history, movie introduction etc. directly through this function.1. Press the “DVD MENU” button on the remote controller to enter to the Root Menu.2. Use the “NAVIGATION ( , , , )” buttonss or input the item index through the number keys (0-9) to do the selection.3. Press the “ENTER”button to confirm the selection.

AudioThis function is applicable for DVD and CD audio but with different effects.• Pressing the “AUDIO” button will change the Audio channel.

Scan ( )This function is applicable for DVD and CD audio but with different effects. The “FAST FORWARD”button and “FAST BACKWARD” button are used to achieve fast play function.• For DVD, there are 5 different levels of speed (2x, 4x, 8x, 16x, 32x). Every successive key

press will increment the speed of quick play.• For CD audio, the FORWARD/BACKWARD will perform quick rolling on the music output. Note : Press the “PLAY” button at any stage to resume to normal speed.

Prev. / Next ( )During playback, press one of the “PREV./NEXT” buttons (PREVIOUS button and NEXT button)• When the “PREV.” button is pressed once, the pickup returns to the beginning of the

previous playing chapter or track.• When the “NEXT” button is pressed once, the pickup will go to the beginning of next chapter

or track.

Stop ( )This function is applicable for DVD and CD disc.• Press the “ ” button once, “PRE-STOP” appears on the screen, press the “ ” button to

resume playback from the scene point.• If you press the “ ” button again, “ ” appears on the screen, the unit will clear the stopped

point.

Play/Pause ( )This function is applicable for DVD and CD disc.• Press the “ ” button once, “ ” appears on the screen, during normal playback to pause

playback.• To resume normal playback, press the“ ” button again to play..Note:The sound is muted during pause playback.

DVD player operation,continued


2726

DVD player operation,continuedProgram ModeThis function is applicable for DVD and CD audio. User can assign the playback sequence

according to his/her preference. For CD audio, user can assign the track sequence while for DVD

disc, user can assign both the Title and Chapter sequence.

• For CD

1. Press the PROGRAM button. The Program Se-

quence table will be shown on the screen.

2. Enter the track numbers according to the user

preference through the Number keys (0-9).

3. After assigning the playback sequence, move

the highlight cursor to the START option by using

the Navigation Arrows.

Press ENTER on the remote control to confirm.

To cancel the program move the highlight cursor to desire

Program By use the Navigation arrows then press the

clear button to delete the selected program.

PROGRAM

0102030405 EXIT NEXT

0607080910

PROGRAM

0102030405 EXIT START NEXT

0607080910

050308

PROGRAM

0607080910

050308

0102030405 EXIT START NEXT

Display (Remain Time)

This function is applicable for DVD only. It will display the timing information of the playback on

the screen.

• For DVD playback, subsequent key Press on the “DISPLAY” button will show the Title

Elapsed Time, Title Remain Time, Chapter Elapse Time and Chapter Remain Time one by

one.

Z oom

This function is applicable for DVDs. User can enlarge a static picture or a moving picture by

pressing the “ZOOM” button. There are 6 levels of zooming (2x, 3x, 4x, 1/2, 1/3, 1/4) and they

can be achieved one by one through subsequent key presses on the “ZOOM” button.

NOTE: User can select the portion of the picture to be enlarged by using the “NAVIGATION”

buttons ( , , , ).


Press the DISPLAY Button





TITLE ELAPSED

T: 01/04 C: 01/12 0:02:13

TITLE REMAIN

T: 01/04 C: 01/12 1:33:30

CHAPTER ELAPSED

T:01/04 C: 01/12 0:02:15

CHAPTER REMAIN

T: 01/04 C: 01/12 0:02:18

DISPLAY OFF


2928

Picture CD

Digital picture (JPEG) from a digital camera can be burnt on to a disc and played on this TV. Insert

a picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified,

the player will start showing the pictures one by one (Slide Show Mode).

Operations

During Slide Show Mode:

• Press the “STOP” button to display the thumbnails of all pictures. Each time 12 pictures will

be shown on the screen.

• Press the “PAUSE” button to freeze the slide show. To resume the slide show mode, press

“PLAY” Button.

• Press the “NEXT” button to skip to next picture.

• Press the “PREVIOUS” button on the remote control to repeat the previous picture.

DVD player operation,continued• For DVD

1. Press the “PROGRAM” button. The

Program Sequence table will show

on the screen.

2. Enter the Title number with the

“NUMBER” button (0-9) on the remote

control.

PROGRAM

01 TT: 01 CH:01 TT: CH:02 TT: CH: TT: CH:03 TT: CH: TT: CH:04 TT: CH: TT: CH:05 TT: CH: TT: CH:

EXIT START NEXT

0607080910

PROGRAM

01 TT:01CH:01 TT: CH:02 TT:02 CH:01 TT: CH:03 TT:03 CH:01 TT: CH:04 TT:04 CH:01 TT: CH:05 TT:05 CH:01 TT: CH:

EXIT START NEXT

0607080910

PROGRAM

01 TT: CH: TT: CH:02 TT: CH: TT: CH:03 TT: CH: TT: CH:04 TT: CH: TT: CH:05 TT: CH: TT: CH: EXIT NEXT

0607080910

PROGRAM

01 TT: 01 CH: TT: CH:02 TT: CH: TT: CH:03 TT: CH: TT: CH:04 TT: CH: TT: CH:05 TT: CH: TT: CH: EXIT NEXT

0607080910

PROGRAM

01 TT: CH: TT: CH:02 TT: CH: TT: CH:03 TT: CH: TT: CH:04 TT: CH: TT: CH:05 TT: CH: TT: CH: EXIT NEXT

0607080910

FOR DVD


3. Enter the Chapter number of the Title

selected in the last step.

4. Repeat step 2 – 3 to input the sequence.

5. After assigning the playback

sequence, move the highlight cursor

to the START option by using the“NAVIGATION” button.

Press “ENTER”button on the remote control to confirm.

To cancel the program

Move the highlight cursor to desired Program by using the “NAVIGATION” button then press

“CLEAR” button to delete the selected program.


3130

Your television is designed to give you trouble-free performance for many years. If you havea problem with your TV, try the solutions listed below.If the suggestions listed below do not solve your problem,contact your local customer supporthotline.There is no picture or sound, or the TV doesn’t turn on.• Make sure the TV is plugged in.• Make sure MUTE is not set on.• Make sure the POWER is on.• Make sure a headphone is not inserted.• If there is neither picture nor sound, unplug the TV for 30 seconds, then plug it in and try

again.There is no picture or sound on some UHF channels.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected & adjusted correctly, in good working order and has

no broken wires.• See if anything is interfering with the antenna signal.• Make sure the AIR/CABLE setting is correct.The sound is OK, but the picture is poor.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected & adjusted correctly, in good working order and has

no broken wires.There is poor reception on some channels.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected & adjusted correctly, in good working order and has

no broken wires.Cannot tune to a cable channel.• Make sure the AIR/CABLE setting is correct.• The channel may not be programmed into memory.The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.• Try another station. If the other stations are OK, it may be a station problem.• Check that the antenna is connected & adjusted correctly, in good working order and has

no broken wires.• See if anything is interfering with the antenna signal.The remote control does not work.• Make sure the TV is plugged in.• Make sure there are fresh batteries in the remote control.• Make sure there is nothing blocking the remote control signal.

TROUBLESHOOTINGAbout DISC Maintenance

On handling discs• Be sure to hold the edge of disc. Do not touch the surface of the disc.

• Do not attach paper or tape to discs.

On cleaning discs• Wipe the disc with a clean, dry cloth from the center outward toward the edges.

• Do not wipe the disc in a circular motion around the center.

• Do not use liquid or aerosol cleaners.

On storing discs• Store the disc in the case to avoid any risk of scratches, dirt or damage.

• Do not leave the disc exposed direct sunlight or in hot and humid places.

Playable discs

In this unit, use only discs that meet the standard, such as DVD-Video, DVD-R/RW(Video

format only), Audio CD,CD-R/CD-RW(CD-DA or jpeg format). If you use a non-standard disc,

we cannot guarantee playback. Even if such a disc can be played back, we cannot guaran-

tee the image or sound quality.

• This unit is designed to playback music Compact Discs(CD) that conform to the CD standard.

CDs that contain(copy-restriction)signals to protect copyrights cannot be played back.

• Some CD-R/RWs and DVD-R/RW cannot be played back depending on the recording

conditions.

• When you play an 8cm disc, you need the adapter(not supplied).



3332

SpecificationRECEIVING CHANNELSTV System: NTSC-M

Channel Range: VHF 2 -13

UHF 14 -69

CATV: A1 - A5, A8, A - W

W+1 - W+84

Tuner Type: 181 channels, Quartz PLL,

Frequency Synthesized

Antenna 75-ohm external antenna terminal for VHF/UHF

DVD SectionLaser Wave length 655nmLaser power : Class 1

Signal System NTSC

HDMISupport format HDMI 1.1, HDMI 1.2, HDMI 1.3

Support definition 480i, 480p, 576p, 720p, 1080i, 1080p

GENERAL SECTIONAC Power Input AC 120V ~ 60 Hz

AC Power Consumption 65 W

Audio Output 2.0W + 2.0W

Dimensions L190 x W540 x H385(mm)

Net Weight kg

v Design and specifications are subject to change without notice.

NOTE:

If you are set to “PC” mode, the input signal format is recommend as 640x480,

800x600, 1024 x 768 @ 60Hz only, and 1024x768 @ 60Hz is most recommend, If input

signal frequency is higher than 60Hz the picture display may be abnormal.

This television receiver represents a fine example of electronic engineering and construction.As such it should be treated with care. We offer the following suggestions so you will enjoy thisproduct for many years to come.

Keep it dry. If water should get on it, wipe if offimmediately. Water contains minerals that cancorrode electronic circuits.

Do not store in hot areas. High temperatures canshorten the life of electronic devices, damagebatteries, and can even distort or melt certain plastics.

Do not drop your product. This will likely result infailure to operate. Circuit boards can crack and thecases may not survive the impact. Handling yourproduct roughly will shorten its useful life.

Do not use or store in areas of high level of dirt ordust. The electronic parts may be contaminated orwill wear prematurely.

Do not use harsh chemicals or strong cleaningsolvents to clean your unit. You need only wipeit with a slightly moist, never wet cloth.

Always make sure any batteries used are fresh andare of the correct type. Old or almost-dead batteriesare also dangerous.A worn out battery can leak chemicals which willdamage the electronic circuits.

CARE & MAINTENANCE


3534

LLOYD’S LIMITED WARRANTYWe at LLOYD’S believe you will be pleased with your new LLOYD’S Product. Please read

this Warranty carefully. LLOYD’S warrants this product to be free from manufacturing

defects including original parts and workmanship for a period of 1 year from the date of

original purchase in and if used in Canada.

Should you find your unit is not operating properly during the terms of full coverage of this

warranty (1 year), LLOYD’S will provide one of the following options (at LLOYD’s

discretion), providing the manufacturing defect is verified along with the date of purchase.

Repair service for 1 year from the date of original purchase at no charge for labour and

parts. Replacement of your defective unit with either a new, refurbished, or equivalent

model at no charge for 1 year from the date of original purchase.

CUSTOMER OBLIGATIONS

This warranty applies to the product from the original date of purchase at retail. Therefore,

the owner must provide a copy of the original, dated bill of sale. No warranty service will be

performed without a bill of sale. Transportation to and from the service depot is the

responsibility of the owner.

This warranty is void if the product is:

A ) Damaged through negligence, abuse, misuse, accident or acts of God.

B) Used in commercial applications or rentals.

C) Modified or repaired by anyone other than LLOYD’S or their expressly authorized

representative.

D) Damage resulting from the improper connection to equipment of other manufacturers.

This warranty does not cover:

A ) Cost incurred in the shipping of the product to and from the LLOYD’S authorized

repair facility listed.

B) Damage or improper operation caused by the failure to follow the operating

instructions provided with the product.

C) Routine adjustments to the product which can be performed by the customer as

outlined in the owner’s manual.

D) Damage to compact disc, or audio tape.

E) Signal reception problems caused by external factors.

F) Products not purchased in Canada.

G) Damage to the products used outside Canada.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES SOLELY TO THE ORIGINAL PURCHASER

AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE

IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN

DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING

WITH THE DATE OF THE ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER

EXPRESSED OR IMPLIED SHALL APPLY TO THE PRODUCT THEREAFTER. LLOYD’S MAKES NO

WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.

THE EXTENT OF LLOYD’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR

REPLACEMENT PROVIDED ABOVE AT THE SOLE DISCRETION OF LLOYD’S IN NO EVENT SHALL

LLOYD’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PRUCHASER.

UNDER NO CIRCUMSTANCES SHALL LLOYD’S BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,

INCIDENTAL FORESEEN, UNFORESEEN, SPECIAL OR CONSEQUENTIAL DAMAGE ARISING OUT

OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT.

THIS WARRANTY IS VALID ONLY IN CANADA. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS. HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM PROVINCE TO

PROVINCE. SOME PROVINCES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR

EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY

TO YOU.

THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.

DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Cosmo Communications Service

2-55 Travail Road.

Markham, Ontario,

L3S-3J1

Phone: (905) 209-0488 Fax: (905) 209-0489

www.cosmocanada.com


G:IB pictureLDVD,LCD IBLDVD2 - Cosmo … not use this product near water-for example,near a bath...

Documents

Transcript of G:IB pictureLDVD,LCD IBLDVD2 - Cosmo … not use this product near water-for example,near a bath...