Gi_10794_09-CEI_Tender123_0910

8/9/2019 Gi_10794_09-CEI_Tender123_0910

1/10

Government of Kerala

Department of Electr ical Inspectorate

Office of the Chief Electrical Inspector

Housing Board Bu ild ings, Santhi Nagar, Thiruvananthapuram 695 001Phone: 0471 2331159, 2330558, Email: [email protected]

No.G1-10794/2009/CEI Thiruvananthapuram

Dated. 22.07.2009

Short Tender Notice

Tender No. 3/2009-10/CEI

Sealed Tenders are invited by the undersigned for the supply of the followinginstruments/equipments to the office of the Electrical Inspector, Meter Testing&

Standards Laboratory, Thiruvananthapuram.

.

Sl.No

Name of Instrument / Equipment with specification Quantityrequired

1. Cold Chamber 1

Cold chamber, inside made of stainless steelSize: Not less than 300mm x 450mm x 300mmTemperature Range shall be from ambient to -10C to +80CTemperature Accuracy shall not be worse than: 1CShall be provided with Digital Control System, built-inrefrigeration & heating system to keep the temperature at27C for 10 hrs.Digital Time totalizer shall be provided

Tenders should be super scribed as Tender No.3/2009-10/CEI for the

supply of Electrical Instruments/ Equipments addressed to the Chief Electrical

Inspector, Housing Board Buildings, Santhi Nagar, Thiruvanantahpuram-1.

Last date of sale of tender form 31/08/2009 Up to 12

Noon

Last date of receipt of tender form 31/08/2009 Up to 3 p.m

Opening date and time of tender form 31/08/2009 At 3.30 p.m

Cost of tender form (Original) Rs.400 + VAT (12.5%)

Cost of tender form(Duplicate) Rs.200 + VAT (12.5%)

Total estimated cost Rs.2,00,000/- (Rupees Two lakhs

only-Including Paking,Fright

charge, Insurance and Inclusive of

all taxes)

EMD 1 % of total quoted value.

8/9/2019 Gi_10794_09-CEI_Tender123_0910

2/10

Period of firmness will be 1months from the date of supply order

Intending tenders may on application to the Chief Electrical Inspector,

Thiruvananthapuram in between 10.15 A.M and 03.00 P.M on any working days can

obtain the requisite forms on which tenders should be submitted. Application for

tender forms should be accompanied by the cost of the tender forms also which underno circumstances will be refunded. The cost will be accepted by cash or money order

only. V.P.P, I.P.O. / D.D/ Postal Stamps are not accepted. Late tender will not be

accepted. The department is not responsible for postal delays. The undersigned has

the power to accept/ reject the tender without assigning any reasons.

For more details visit our web site www.ceikerala.gov.in

Chief Electrical Inspector.

8/9/2019 Gi_10794_09-CEI_Tender123_0910

3/10





No.G1- 10794/2009/CEI Thiruvananthapuram

Dated.22.07.2009

WINDOW No.

Short Tender No.3/2009-10/CEI

Chief Electrical Inspector,

Chief Electrical Inspectorate

Housing Board Building, Santhi Nagar,,

Thiruvananthapuram-695 001.

Ph.0471 2331104.

Sl No Name of Instrument/ Equipment with specification Quantity

required

1 Cold Chamber 1 No

Cost of tender form (original) Rs.400+VAT (12.5%)

Cost of tender form (Duplicate) Rs.200+VAT (12.5%)

Last date and time of sale of tender form 31/08/2009 - 12 Noon

Last date and time of receipt of sealed

tenders

31/08/2009 - 3 p.m.

Date of opening of Tender 31/08/2009 - 3.30 pm

Total estimated cost Rs.2,00,000/- (Rupees Two

lakhs only Including

Paking,Fright charge,

Insurance and Inclusive of all

taxes)

E.M.D. 1% of Quoted Value.



8/9/2019 Gi_10794_09-CEI_Tender123_0910

4/10



Office of the Chief Electrical InspectorHousing Board Bu ild ings, Santhi Nagar, Thiruvananthapuram 695 001Phone: 0471 2331159, 2330558, Email: [email protected]


Dated. 22.07.2009

Short Tender Notice


Sealed Tenders are invited by the undersigned for the supply of the following

instruments/equipments to the office of the Electrical Inspector, Meter Testing&


Sl.No

Name of Instrument / Equipment with specification Quantityrequired

Equipments for Testing Rigid Conduits o f Insulating Materials as per IS: 9537

1. Gauges for checking maximum outside diameter of 20mm and 25mmConduitsSteel gauges as per Fig. 1 and Clause 7.1.1 of IS: 9537 Part 3Manufacturing tolerance : - 0

- 0.01mm Admissible wear : +0.01mm

1 each

2. Gauges for checking min imum outside diameter of 20mm and 25mmConduitsSteel gauges as per Fig.2 and Clause 7.1.1 of IS: 9537 Part 3Manufacturing tolerance : 0

- 0.022mm Admissible wear : +0.022mm

0

1 each

3. Gauges for checking minimum inside diameter of 20mm and 25mmConduitsPolished steel gauges as per Fig. 3 and Clause 7.2 of IS: 9537 Part 3Manufacturing tolerance : +0.05mm

0 Admissible wear : 0.01mm

1 each

4. Bending Fixture for 20mm and 25mm ConduitsTwo numbers of fixtures as per Fig. 4 and clause 9.2 of IS:9537 Part 3 for conducting bending test on 20mm and 25mmconduits and two gauges of hardened and polished steel as inFig. 5 of clause 9.5.2 of IS:9537 (Part 3).Manufacturing tolerance : +0.05mm

0 Admissible wear : 0.01mmTolerance on axial dimension : 0.2mm

1 each

8/9/2019 Gi_10794_09-CEI_Tender123_0910

5/10

5. Compression Test ApparatusCompression test apparatus as detailed in Fig. 1 and Clause

9.3.2 of IS: 9537 (Part 1). Compression apparatus shall havedefinite mass to apply force at 125 Newton 320 Newton 750Newton 1250 Newton & 4000 Newton for different grades ofconduits.

1

6. Collapse Test Apparatus for 20mm and 25 mm ConduitsCollapse test systemas per Fig.3 and clause 9.5 of IS: 9537 (PartI) for conducting collapse test.

1 each

7. Impact Test ApparatusImpact test apparatus as per Fig. 2 and Clause 9.4 of IS: 9537(Part I) for conducting Impact test

1

8. Ball Pressure Test Apparatus

Ball Pressure Test Apparatus as per Fig. 6 and clause 10 ofIS: 9537 (Part 3)

1

9. Water BathSize not less than 450mm x 450mm x 600mmTemperature Range : +25C to +65C.Temperature Accuracy :1%Temperature Uniformity: 1C.Temperature Resolution : 0.1CPower: Mains operated 230V AC/50 Hz.Timer : Time hour meter shall be provided

Indicator: Mains ON/OFF indicator, fault indicator etc. Digitaltemperature Indicator with Sensor shall be providedSealing: Double walled, thermo statically sealed with glasswool to avoid temperature losses.Stirrer : Stirrer shall be provided along with the itemThe chamber shall be of double walled type, inner wall shallbe made of stainless steel and outer wall be of mild steel withpowder coated paint or stove enamelled. A lid shall also beprovided to cover the bath.A digital temperature indicator cum controller shall beprovided to control the temperature.

1

10. BurnerBurner and associated equipments suitable for testing theresistance to burning of conduit material as per clause 11 ofIS: 9537 (Part I) (Excluding gas)

1

11. Chemical BalancerElectronic weighing balance using microcontroller technology capable ofweighing up to 120 gm with accuracy not less than of 0.001gm(1.mg).Interial resolution shall be100000 or more. Balance shall operate on50 Hz,AC.230V+10%.The display shall be12.5mm LED/LCD.The balanceshall satisfactorily work in the temperature range of 100 C to 500C A-6V/4

AH Rechargeable dry battery shall be supplied along with

1




8/9/2019 Gi_10794_09-CEI_Tender123_0910

6/10

8/9/2019 Gi_10794_09-CEI_Tender123_0910

7/10






Dated. 22.07.2009

WINDOW No.




Housing Board Building, Santhi Nagar,


Ph.0471 2331104.


required

1 Equipments for Testing Rigid Conduits of Insulating Materials as

per IS: 9537

1 No

Cost of tender form (original) Rs.1200+VAT (12.5%)

Cost of tender form (Duplicate) Rs. 600+VAT (12.5%)



tenders

31/08/2009 - 3 p.m.


Total estimated cost Rs.6,00,000/- (Rupees Six lakhs

only Including Paking,Fright

charge, Insurance and Inclusive

of all taxes)




8/9/2019 Gi_10794_09-CEI_Tender123_0910

8/10



Office of the Chief Electrical InspectorHousing Board Bu ild ings, Santhi Nagar, Thiruvananthapuram 695 001Phone: 0471 2331159, 2330558, Email: [email protected]


Dated. 22.07.2009

Short Tender Notice


Sealed Tenders are invited by the undersigned for the supply of the following

instruments/equipments to the office of the Electrical Inspector, Meter Testing&


Sl.

No

Name of Instrument / Equipment with specification Quantity

required1. 3Phase Phantom Load 1

Rugged Multi-Amp Model 3Phase Phantom Loads operating from a single-phase source suitable for testing single-phase and poly phase watt-hourmeters at 50 and 100% power factor.The unit shall be suitable for continuous adjustment of the load current.Shall have close control of the output for different load circuit impedances orin the event of variations in the source voltage.The unit shall be rated for continuous duty.

Input Primary Voltages240 Volt, 1, 50 Hz

fused input circuitOutput Current Ranges (switch-selected)Full Load: 0 to 2.5/5/15/50 A at 0.5pf and upfLight Load: 0 to 0.25/0.5/1.5/5 A at upf

AccessoriesSuitable Current leads and Voltage leads sufficient to test 3Phase energymeters and Instruction manual shall be supplied along with the unit.




8/9/2019 Gi_10794_09-CEI_Tender123_0910

9/10

Last date of sale of tender form 31/08/2009 Up to 12

Noon

Last date of receipt of tender form 31/08/2009 Up to 3 p.m

Opening date and time of tender form 31/08/2009 At 3.30 p.m

Cost of tender form (Original) Rs.1100+ VAT (12.5%)Cost of tender form(Duplicate) Rs. 550 + VAT (12.5%)

Total estimated cost Rs.5,20,000/- (Rupees Five lakhs

and Twenty Thousand only-

Including Paking,Fright charge,

Insurance and Inclusive of all taxes)

EMD 1 % of total quoted value.

Period of firmness will be 1months from the date of supply order

Intending tenders may on application to the Chief Electrical Inspector,

Thiruvananthapuram in between 10.15 A.M and 03.00 P.M on any working days can

obtain the requisite forms on which tenders should be submitted. Application for

tender forms should be accompanied by the cost of the tender forms also which under

no circumstances will be refunded. The cost will be accepted by cash or money order

only. V.P.P, I.P.O. / D.D/ Postal Stamps are not accepted. Late tender will not be

accepted. The department is not responsible for postal delays. The undersigned has

the power to accept/ reject the tender without assigning any reasons. For more details visit our web site www.ceikerala.gov.in


8/9/2019 Gi_10794_09-CEI_Tender123_0910

10/10






Dated. 22.07.2009

WINDOW No.




Housing Board Building Santhi Nagar,,


Ph.0471 2331104.


required

1 3Phase Phantom Load 1 No

Cost of tender form (original) Rs.1100/-+VAT (12.5%)

Cost of tender form (Duplicate) Rs. 550/-+VAT (12.5%)



tenders

31/08/2009 - 3 p.m.


Total estimated cost Rs.5,20,000/- (Rupees Five

lakhs and Twenty Thousand

only- Including Paking,Fright

charge, Insurance and Inclusive

of all taxes)




Gi_10794_09-CEI_Tender123_0910

Documents

Transcript of Gi_10794_09-CEI_Tender123_0910