GHOST S1 TOPHAT MkII - Inet.se · 2019. 3. 29. · GHOST S1 MkII USER MANUAL • Unscrew the 4...
Transcript of GHOST S1 TOPHAT MkII - Inet.se · 2019. 3. 29. · GHOST S1 MkII USER MANUAL • Unscrew the 4...
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 TOPHAT MkIILQ-GHS102-TA
USER MANUAL (ENG)
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
BOX CONTENT
8x M3x4 button head 4x M3x6 button head
GHOST S1 MkII USER MANUAL
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Loosely screw in the shorter screws into the
sides of the TopHat
x2
x4
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Place the two sides parallel to each other
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Slide in the gables
• Tighten the 4 screws
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Slide in the gables
• Tighten the 4 screws
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Place the platform on top of the case
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Place the TopHat on top of the platform
• Screw down the TopHat to the case
x4
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Unscrew the 4 screws that are holding the
bottom plate in place and remove itx4
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Flip the TopHat upside down
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Place the TopHat in the bottom of the case
and screw it in place
x4
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
ILLUSTRATION
ASSEMBLY STEPS SCREWS
GHOST S1 MkII USER MANUAL
• Place the bottom plate at the bottom and
screw it in placex4
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
LOUQE AB
Designed in Sweden
[email protected] www.louqe.com