evaluation of hand lay-up and resin transfer molding in composite
GFRP [Hand lay up]
-
Upload
hernaldo-mendoza -
Category
Technology
-
view
515 -
download
7
description
Transcript of GFRP [Hand lay up]
Hand Lay-upcz Ifsnbmep Nfnep{b Obwb
GFRP
Method for preparing the fiber
Glass Fiber [Mat]
Lab. of Composite Materials, UNAQ
Cutting 30x30cm [plain weave GF]
Lab. of Composite Materials, UNAQ
2 Mat layers and 1 plain weave layer
Lab. of Composite Materials, UNAQ
Weighting the fibers for resin calculation [for 50% Vf]
Lab. of Composite Materials, UNAQ
Epoxy Resin
Lab. of Composite Materials, UNAQ
Resin mixing and wetting
Curing Agent [4 parts of epoxy 1 part of curing agent]
Lab. of Composite Materials, UNAQ
Mylar® covering for resin distribution over fibers
Lab. of Composite Materials, UNAQ
Hand Lay-up
Lab. of Composite Materials, UNAQ
Completely wet, finished laminate
Lab. of Composite Materials, UNAQ