gerudi tangan
2
POLITEKNIK TUANKU SULTANAH BAHIYAH DEPARTMENT : MODEL/ITEM PROCESS : REFERENCE JKM NUMBER SECTION : JKM/L0002-001 MARK DATE REVISION P.I.C Appv. PREPARED BY CHECKED BY APPROVED BY OPERATION PROCEDURE 1. Practice SKB activities 5 minute before & after operations.Susun,Kemas,Bersih 2. Check and complete the task. 3. Safety First. DAILY MAINTENANCE 1. Daily checking. 2. Clean the machine & working area. OPERATOR RULES 1. Follow the standard operation properly. 2. Check the machine before using it. 3. If you found rubbish throw it into dustbin. 4. If you notice something which is abnormal, please inform to lecturer on duty immwdiately. ENGLISH LANGUAGE WORKING STANDARD (SOP) DRILLING MACHINE START UP OPERATION MACHINE WORKSHOP 1. SWITCH ON THE MAIN POWER 3. MAKE SURE THE DRILL TIGHT IN POSITION FIRMLY 6. PRESS GREEN BUTTON TO OPERATE THE MACHINE.PRESS RED BUTTON TO STOP THE MACHINE OPERATION. 5. USE THE HOLDER TO CONTROL UP AND DOWN THE DRILL 2. MAKE SURE THE EMERGENCY BUTTON IN HOMING POSITION 2 4. MAKE SURE THE MATERIAL THAT NEEDING TO BE DRILLEED TIGHT IN POSITION FIRMLY 1 3 4 5 6 Red Button Emergency button Green Button
-
Upload
ashrofsuaib -
Category
Documents
-
view
197 -
download
6
Transcript of gerudi tangan
POLITEKNIK TUANKU SULTANAH BAHIYAHDEPARTMENT MODEL/ITEM PROCESS : REFERENCE
JKMNUMBER
SECTION : JKM/L0002-001
MARK DATE REVISION P.I.C Appv. PREPARED BY CHECKED BY APPROVED BY
OPERATION PROCEDURE
1. Practice SKB activities 5 minute before
& after operations.Susun,Kemas,Bersih
2. Check and complete the task.
3. Safety First.
DAILY MAINTENANCE
1. Daily checking.
2. Clean the machine & working area.
OPERATOR RULES
1. Follow the standard operation
properly.
2. Check the machine before using it.
3. If you found rubbish throw it into
dustbin.
4. If you notice something which is
abnormal, please inform to lecturer
on duty immwdiately.
ENGLISH LANGUAGE
WORKING STANDARD
(SOP)DRILLING MACHINE
START UP OPERATION
MACHINE WORKSHOP
1. SWITCH ON THE MAIN POWER
3. MAKE SURE THE DRILL TIGHT IN POSITION FIRMLY
6. PRESS GREEN BUTTON TO OPERATE THE MACHINE.PRESS RED BUTTON TO STOP THE MACHINE OPERATION.
5. USE THE HOLDER TO CONTROL UP AND DOWN THE DRILL
2. MAKE SURE THE EMERGENCY BUTTON IN HOMING POSITION
2
4. MAKE SURE THE MATERIAL THAT NEEDING TO BE DRILLEED TIGHT IN POSITION FIRMLY
1
3 4 5 6Red Button
Emergency button
Green Button
POLITEKNIK TUANKU SULTANAH BAHIYAHDEPARTMENT MODEL/ITEM PROCESS : REFERENCE
JKMNUMBER
SECTION : JKM/L0002-002
MUHD FUAD AZMIR MOHD ELIASMARK DATE REVISION P.I.C Appv. PREPARED BY CHECKED BY APPROVED BY
OPERATION PROCEDURE
1. Practice SKB activities 5 minute before
& after operations.Susun,Kemas,Bersih
2. Check and complete the task.
3. Safety First.
DAILY MAINTENANCE
1. Daily checking.
2. Clean the machine & working area.
OPERATOR RULES
1. Follow the standard operation
properly.
2. Check the machine before using it.
3. If you found rubbish throw it into
dustbin.
4. If you notice something which is
abnormal, please inform to lecturer
on duty immwdiately.
ENGLISH LANGUAGE
WORKING STANDARD
(SOP)
PEDESTEL/ BENCH
GRINDER
START UP OPERATION
MACHINE WORKSHOP
1. ENSURE THE COOLANT LEVEL IS FULL.
3. PRESS THE GREEN BUTTON TO ACTIVATE THE GRINDER OPERATION
5. PRESS THE RED BUTTON TO STOP THE GRINDER OPERATION.
2. SWITCH ON THE MAIN POWER
1 2
3 4
