Quality Assurance, Harmonisation and Capacity Building – a German-Southeast Asian Case Study
German Association Automotive Industry Quality...
Transcript of German Association Automotive Industry Quality...
VDA Quality Management Public TrainingVDA
German Association of Automotive IndustryQuality Management Center China
2015
Ver. 1.2015 Quality Made in Germany
VDA QMC Offers
Know how Transfer into PracticeImplementation of automotive specific standardsWe have set ourselves the task of providing you with VDA expert competence as optimally andactively as possible. So it is our primary interest to supplement our service offers with methodsand techniques that holistically take your needs as customers into account. In addition to ourtraining services, you can nowmake use of highly qualified on site support.
We offer you individual support from practice for practice. Our instructors, competent expertsfrom automotive industry, guide and advise you. Let them support you in implementing thelessons learned. Of course we take your preferences into account in selecting the instructors, inorder to guarantee neutrality and necessary prerequisites for an atmosphere of mutual trust.
Public trainingWe offer regularly public VDA training in Shanghai / Beijing / Shenyang / Changchun / Chengdu
Trainings in Chinese and EnglishVDA certified Chinese Trainer
In house training and coachingWe come to your place!
Tailor made courses, on site coaching to establish the VDA knowledgeOn side coaching for VDA audits
Examination &management feedbackWe check your learning progress and the competence by examination
Personal VDA Certificates and Registratione.g. Auditor Card ISO/TS 16949, VDA 6.1, VDA 6.2, VDA 6.3, VDA 6.4
VDA automotive quality standardsIn Chinese/English (Page 16,17)
VDA QMC China personal & companymembership(Page 18 21)
Any further inquiries, please contact us directly: [email protected], Telephone: 010 65900067; 021 39197012
List of ContentsVDA-QMC Quality Management Center China
1
ID 1401+1408C
You will get the knowledge of content and implementation of process audit according to VDA 6.3 and understand the connection among system, process and product audit.
Our target is that, through training you can analyze the complicated process within the company and notice the
take the improvement measurements to reduce error cost and waste.
+ VDA6.3 (2010 edition) introduction including the structure and detail content changes
+ Procedure and steps of process audit + As a digression of process audit: the knowledge
+ Group work+ Assessment method and technique of process audit+ Process audit: case study
Supplier quality engineers, internal/external auditors, process optimizers, process auditors, employees from the QM sectors.
+ After successful completion of the training, you will
+
written and oral examination.
In-house: Location at customer-side (max. 20 persons)
trainings!
provided to each participant for free.
(ID 1401)
3 days
VAT incl., lunch is included during the training days; Participants
VAT incl. customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
(ID 1408C)
VAT incl. for in-house training, customer need to pay additional VDA second examiner travel and accommodation related costs.---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
Compact Qualification for VDA 6.3 Process AuditorVDA-QMC Quality Management Center China
1
ID 1401+1408C
VDA 6.3
2
In consideration of the process approach and the
according to VDA 6.3 in services.
This includes general requirements, methods, principles, the evaluation scheme and risk analysis.
and appropriate potential alongthe value chain during the process audit.
The representation of the life cycle of a service oriented to the model "service realize" according to VDA 6.2.
+ Links to other requirements of ISO 9001,ISO / TS 16949, VDA 6.2, etc.
+ Overview of the three different types of audit and explanation of the differences
+ Overview of the contents of each chapter in the VDA 6.3
+ Introduction of the process-oriented approach for risk analysis according to the Turtle model
+completion of the audit
+ Planning and implementation of a process audit++ Interview technique for auditors+
process-auditors++
services+
Process+
/ customer care++
This course guides you to the requirements of the audit process and teaches you the holistic application in the area of provision of services in the automotive industry.VDA6.3 (2010 edition) introduction includes the structure and detail content changes
which provide services in the automotive industry and
+ After successful completion of the training, you
In-house: Location at customer-side (max. 20 persons)
trainings!
provided to each participant for free.
3 days
VAT incl., lunch is included during the training days; Participants
VAT incl. customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
VDA 6.3 – Modul H – Processaudit – Product life cycle - ServiceVDA-QMC Quality Management Center China
2
VDA 6.3 – H – – –
3
Increased customer demands, safety requirements, statutory regulations as well as the increased use of electronic components and software lead to ever more complex products.
and supply industry are required to identify these product
account when conducting product audits.
implementation of the methods for preventive quality planning. Thus, a product audit has not only quality
evidence.
In the process chain, the product audit demonstrates the quality level of the internally/externally manufactured products.
This training “Management of Product Audit Programs” shows participants how to conduct product audits
People who plan and/or conduct product audits in their organization.
++ Audit program structure and product audit sequence+ Audit planning++ Reporting++
1 day
In-house: Location at customer-side (max. 20 persons)
discount for trainings!
training materials are provided to each participant for free.
VAT incl., lunch is included during the training days; Participants
VAT incl. customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
VDA 6.5 – Qualification as Product AuditorVDA-QMC Quality Management Center China
3
VDA 6.5
4
service providers of the automotive industry.
+from VDA 6
+ Structure and architecture of VDA 6.2+ Process model and evaluation+++ The contents are consolidated with case studies and
group work
3days
Trained auditors of the automotive industry with knowledge of ISO 9001 and experience in the service industry; 1st/2nd/3rd party auditors; QM experts; employees and executives from the entire automotive industry (such as car dealers, parts and sales centers, spare part and accessory dealers, logistics providers, consulting engineers and other service companies).
st party auditors+
passing the written test you will receive a VDA
nd/3rd party auditors+ Prospective 2nd/3rd party auditors have to
successfully complete the corresponding exam day. After passing the written and oral tests you will
as well as a corresponding auditor card and VDA
In-house: Location at customer-side (max. 20 persons)
trainings!
VDA volume 6.
VAT incl., lunch is included during the training days; Participants
VAT incl. customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
VAT incl. for in-house training, customer need to pay additional VDA second examiner travel and accommodation related costs.---------------------------------------------------------------------------
2015.4.14-2015.4.15 (Shanghai)
2015.9.15-2015.9.16 (Shanghai)
---------------------------------------------------------------------------
www.vdachina.com.cn
Qualification for 1st/2nd Party Auditors VDA 6.2VDA-QMC Quality Management Center China
4
( + )
VDA 6.2 /
5
1
+
+
16949+
with which 3rd party auditors of ISO/TS 16949 are
3 days
QM employees/representatives or internal/external system auditors with audit experience in the automotive industry and knowledge of ISO 9001.
+ After passing the written test you will receive a VDA
In-house: Location at customer-side (max. 20 persons)
trainings!
+is recommended.
+ Knowledge of ISO 9001 is required.
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.
ND
st Party Auditor:
nd Party Auditor:
VAT incl. for in-house training, customer need to pay additional VDA second examiner travel and accommodation related costs.
---------------------------------------------------------------------------
2015.5.11-2015.5.13 (Shanghai)2015.11.16-2015.11.18 (Shanghai)---------------------------------------------------------------------------
www.vdachina.com.cn
Qualification Course for prospective 1st/2nd Party Auditors of ISO/TS16949VDA-QMC Quality Management Center China
5
+
ISO/TS 16949 / +
6
Automotive industry specialists and executives in quality management who would like to assess the internal QM system or that of suppliers (1st/2nd Party
like to further develop their own and/or their suppliers’
standards and systematic methods.
+ The examination for VDA QM Representative
divided into two parts: a written and an oral exam. After passing the written and oral tests
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodationrelated costs.---------------------------------------------------------------------------
2015.10.19-2015.10.24 (Shanghai, ID 1045)---------------------------------------------------------------------------
www.vdachina.com.cn
+- Introduction to and further development of amanagement system- Process organization and management
+and Tools
+
+- Statistical methods in the organization
+ Module IV Auditor in the Automotive Industry
- Interview techniques+
Internal Auditor
( )6 days for each.
VDA Quality Manager and Internal Auditor (Basic Qualification)VDA-QMC Quality Management Center China
6
( )
VDA
7
revised in 2012 and adapted to the current automotive
Maturity Level Assurance, VDA 6.3) are highlighted and integrated.
requirements, structured implementation in operational and organizational structure, well as providing evidence as providing PPA procedure structured in.
+ Overview and correlation with relevant statutory regulations
+++
++ Planning and coordination of PPA procedure incl. chronological integration into product development process+ Trigger matrix+ Sampling levels+ Process validation+ Dealing with small-scale series
+ need for regulation+ Practical example sampling process
1.5 days
future.
+ After passing the written test you will receive a VDA
In-house: Location at customer-side (max. 20 persons)
trainings!
well as experience and knowledge in dealing with
advantageous. Participation in VDA training “Maturity Level Assurance” is recommended.
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodationrelated costs.---------------------------------------------------------------------------
2015.4.14-2015.4.15 (Shanghai)
2015.9.15-2015.9.16 (Shanghai)
---------------------------------------------------------------------------
www.vdachina.com.cn
VDA 2 – Production Process and Product Approval(PPF)VDA-QMC Quality Management Center China
7
( )
VDA 2 – (PPF)
8
This training provides decision-makers, who need information, and employees, who are interested in further
of application, as well as customer requirements.
Methods and approach models are presented discussed
after the training.
++++
(VDA) 2+
+ Presentation and explanation of application in practice
2 days
+ After passing the written test you will receive a VDA
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
2015.3.16-2015.3.17 (Shanghai)
2015.12.8-2015.12.9 (Shanghai)---------------------------------------------------------------------------
www.vdachina.com.cn
Contents APQP.PPAP.FMEA.MSA.Project staffTarget audience: Compact Training Core Tools
Duration:2 days ID 2706
Compact Training Core ToolsVDA-QMC Quality Management Center China
8
Contents APQP.PPAP.FMEA.MSA.Project staffTarget audience: Compact Training Core Tools
Duration:2 days ID 2706
9
participants with the contents of this standard and to
+++++++ Sample strategy and logistics+ Data exchange and reporting++ Group exercises
2 days
warranty, quality assurance and sales in automotive and
failure analysis.
+ After passing the written test you will receive a VDA
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
2015.1.8-2015.1.9 (Shanghai)
2015.5.21-2015.5.22 (Shanghai)2015.8.3-2015.8.4 (Shanghai)
---------------------------------------------------------------------------
www.vdachina.com.cn
VDA Standard Field Failure AnalysisVDA-QMC Quality Management Center China
9
VDA
unifying evaluation of the failure analysis process.
In order to promote the implementation of these standards
failure analysis process and supports the internal and external inter faces with data analyses.
Participants are introduced to a comprehensive
for implementation are communicated which ensure
chain in the failure elimination process
+suppliers in the supply chain in the failure elimination process (mindset)
++ Technical and commercial evaluation in the supply
chain++
evaluation and testing of hypotheses)+
+as well as reporting
3 days
assurance, warranty, sales and other areas who want
analysis and failure elimination processes.
+ After passing the written test you will receive a
The team of instructors usually consists of a representative from automotive and suppler industryrespectively.
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
2015.11.9-2015.11.11 (Shanghai)---------------------------------------------------------------------------
www.vdachina.com.cn
VDA FQE – Field Quality EngineerVDA-QMC Quality Management Center China
10
VDA FQE –
10
of processes and methods, as well as the chronology
module for achieving competence in the area of “supplier management”.
Independently of technology, the necessary activities
evaluations and applications from the product development process to serial management are demonstrated.
+ Role of supplier management in the supply chain+ Supplier management in the organizaiton’s
processes++ Supplier selection++ Audit management+ Product and process development++ Supplier assessment+ Supplier development+
3 days
knowledge helpful. At least one year professional experience in automotive industry (supply chain)
management.
purchasing, logistics, production and development who work in supplier management.
+ After passing the written test you will receive a
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., lunch is included during the training days; Participants
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
Basic Training: VDA Supplier Quality Engineer VDA-QMC Quality Management Center China
11
VDA
11
12
++
++++ Analytical methods of the complaint+++ Internal organizational integration of the use safety
Training: 1 day
+
+safety
After completed participating the one day training as well
trainings!
VAT incl., lunch is included during the training days; Participants
---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
Training of Product Safety Officer (PSB)VDA-QMC Quality Management Center China
12
13
supplier parts, components and systems through process-accompanying assurance of product maturity at the start of production.
standard concept for cooperation and communication
parties involved in the supply chain. To this purpose, it provides a standard set of measured values and criteria with the corresponding methodology. Since planned comprehensive use of the standard in the automotive and supplier industries requires knowledge and competence in different functions of the organization, a
designed.
methods (evaluation, contents, control and report systematic) that are necessary for participants in maturity level regulatory processes in the product development process.
contents are applied in practice during a group exercise
+ Initial situation and history+
assurance+ Positive and negative examples from organizations++++ Group exercises
2 days
spokespersons of cross-functional and cross organizational development teams, persons
+ After passing the written test you will receive a
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., customer need to pay VDA trainer travel and accommodation related costs.---------------------------------------------------------------------------
---------------------------------------------------------------------------
www.vdachina.com.cn
Maturity Level Assurance for New PartsVDA-QMC Quality Management Center China
13
14
requirements throughout the supply chain.
delivery to schedule, optimized delivery quality
assistance for:++
++
The model is roughly divided into three parts:+ The prerequisites+inspection and+ the four control loops: Management control loop, supplier control loop, production control loop, and customer control loop.
degree in the product development process. Therefore, this volume is very closely interlocked with “Maturity Level Assurance”.
As well as fault and supplier management, recommendations for controlling and management are
are recommended. Various checklists and supplementary, tested practical examples on the
examples.
planners, production managers, purchasers.
1 day
+16949)
+
processes+
volume
+ After passing the written test you will receive a
In-house: Location at customer-side (max. 20 persons)
trainings!
VAT incl., customer need to pay VDA trainer travel and accommodationrelated costs.
---------------------------------------------------------------------------
www.vdachina.com.cn
Robust Production Process AssuranceVDA-QMC Quality Management Center China
14
15
REGISTRATION, DETAILS AND ADDITIONAL INFORMATIONTRAINING APPLICATION FORM
Online registration through QMC China webpage: (first web registration, under"Webshop"->"Training Registration")可通过QMC China网站在线注册:(需要注册登录,位于“在线商店”->“培训注册”) http://www.vdachina.com.cn/15
16
REGISTRATION, DETAILS AND ADDITIONAL INFORMATIONORDER FORM FOR VDA STANDARDS
17
REGISTRATION, DETAILS AND ADDITIONAL INFORMATIONORDER FORM FOR VDA STANDARDS
18
119
20
21
22
Organizer: VDA Verband der Automobilindustrie e.V. / German Association of the Automotive Industry Behrenstraße 35 D-10117 Berlin Telefon/phone +49 30 897842-0 Telefax/fax +49 30 897842-600 www.vda.de
Your contact partner: Gabriele Zimmermann Head of the Exhibition Department Phone +49 30 897842-200 Telefax/fax +49 30 897842-604 E-mail: [email protected]
66th IAA Cars International Motor Show In Frankfurt/Main, Sept. 17 to Sept. 27, 2015
Pressetage: 15. bis 16. September 2015Press days: September 15 16, 2015
23
Contact us: VDA-QMC Quality Management Center (Beijing) Co. Ltd. Beijing Head Quarter Shanghai Liaison OfficeLandmark Tower 2/ German Center, SAITC, 8 North Dong San Huan Road, 79 Tongjia Road, Tel: 010-6590 0067 Tel: 021-3919 7012 Fax: 010-6590 0406 E-mail: [email protected] Homepage: http://www.vdachina.com.cn