GEOMASH - Product Catalogue
description
Transcript of GEOMASH - Product Catalogue
-
7/18/2019 GEOMASH - Product Catalogue
1/53
GEOMASH DRILLING RIGS
Effective drilling solutions
-
7/18/2019 GEOMASH - Product Catalogue
2/53
ETL construction
Caterpillar vehicles
Construction
Seismic exploration
Hydrogeology and water well drilling
Geological exploration
Content
1.1. UBV....................................................................................................................................3
1.3. LBU-50................................................................................................................................7
1.4. LBU-50-30...........................................................................................................................9
1.5. UGB...................................................................................................................................11
3.1 AZA-3..................................................................................................................................19
4.1 USH-2T4/USH-2T4V............................................................................................................21
5.1 USG-010............................................................................................................................23
6.1 GTM-0,8.............................................................................................................................27
7.1 KB-13................................................................................................................................32
7.2 KB-13................................................................................................................................36
7.3 KB-20/100..........................................................................................................................40
7.4 KB-25................................................................................................................................44
7.5 KB-30................................................................................................................................48
About the company.............................................................................................1
1. Multipurpose self-propelled drilling rigs
1.2. PBU-2 series 300..................................................................................................................5
1.6. MBU Mobile drilling rigs........................................................................................................13
2. Compact drilling rigs
2.1. BBU 000 Openok...............................................................................................................17
2.2. BBU 001 Openok-S...........................................................................................................18
3.AZA-3 anchor screwing drilling rig
4.Seismic exploration drilling rigs
5. Construction drilling rig
5.Boring and crane vehicles for ETL construction
5.1 BKM series 300. BKM-550....................................................................................................25
6. Caterpillar vehicles
6.2 GTM-0,8R ..........................................................................................................................29
7. Lutz Kurth drilling rigs
-
7/18/2019 GEOMASH - Product Catalogue
3/53
LLC Geomash manufactures a wide number of universal drilling rigs for solution of tasks in the field of drilling of
exploration wells, seismic exploration, engineering researches, drilling of wells of different function when performing
construction works, and also hydrogeological wells.
For more than 130-year of the company history a lot of things changed, invariable was only one our aspiration to
create drilling equipment capable to provide effective drilling for our partners.
The "Geomash" quality management system conforms to the ISO 9001:2008 standard concerning design and
production of mobile drilling rigs, spare parts and boring tools.
Detailed knowledge of technological drilling processes and problems which our buyers face in the course of drilling
give the chance to create the drilling rigs which are most adapted for the geological conditions and tasks solved by our
buyers.
Companies of various activity profile successfully operate with "Geomash" products.
Largest geophysical organizations are constant partners of Geomash.
Among them are gas-and oil-extracting enterprises, such as JSC Gazprom, Lukoil, Transneft, Rosneft and others.
Our delivery geography isn't limited to the territory of the Russian Federation and includes countries of the Near and
far-abroad countries.
We seek to turn our knowledge and experience in the area of development and production of drilling rigs into
competitive advantages of our partners.
-
7/18/2019 GEOMASH - Product Catalogue
4/53
UBV Drill rigs
UBV-318, UBV-320 drilling rigs with a hydraulically driven power swivel are
intended for drilling of hydrogeological, geological exploration, degassing
and technical wells in grounds of the XII drilling category.
The plant provides:
- rotary core and non core drilling with fluid circulating / air flush technology
- rotary drilling with reverse air circulation - RC technology (UBV-320)
- DTH drilling of wells with a diameter up to 490 mm.
UBV class drill rigs are mounted on special automobile chassis KAMAZ-6522
(Euro 4) with a 66 wheel base. The drilling rig drive is carried out from the
car engine via PTO.
For simplification of RIH/POOH production operations the rigs are suppliedwith threaded connections drillpipe breaker, single-pipe loader and the utility
hoist with a telescopic cargo arrow.
Basic equipment provides both core and no-core drilling
with fluid circulation or air flushing.
Electronic control system provides accurate control
of the rotation speed, torque value and push-down force,
as well as allows to control the occurrence
of accidents in the well.
Optionally delivery of a tube holder is possible.
All mechanisms and units of the rig
have a hydraulic drive.
Mast design, existence of a crown block andthe main winch provide descent of upsetting
columns in accordance with the existing
of safety measures requirements.
Performance can be enhanced
by the optional equipment
Hydraulic pipe holder
Breakout wrench
Pipe loader
UBVDrillRig
3
-
7/18/2019 GEOMASH - Product Catalogue
5/53
Technical characteristics
UBVD
rillRig
4
-
7/18/2019 GEOMASH - Product Catalogue
6/53
Multi-purpose Drill Rig of PBU-2
The multi-purpose PBU-2 drilling rig with the mechanical drive
of a mobile rotator is intended for drilling of engineering-geological, seismo exploration,
hydro-and geological exploration wells, and also wells of various purpose when performing construction works.
Simple and reliable rig design provides a wide range of drilling methods
of field investigations:
auger drilling
auger bore (raisen) drilling
DTH drilling
mud/air rotary drilling
soil sampling
cone penetration tests (CPT)
PBU-2 can be mounted on different chassis:tracked carriers and forest tracks, or sledge(skid) based.
We have wide experience of drill rig mounting on customers vehicles.
Most PBU-2 rigs are driven by desk diesel engines, but some models
can be P.T.O powered by trucks or tracked vehicles engines.
Leveling system
two hydraulic jacks
Features
rotary Head Swing Out System hydraulically or mechanically driven
detachable operator platform
tool platforms
Complete set by inquiry:
piston type compressors
screw type compressors
mud pump
the balance weight for cable-percussion
drilling and hole cleaning
set of accessories for DTH drilling
welding generator
aligning adaptators for augers
aligning adaptators for drill pipes
engine prestarting heater
PBU-2
drillrig
5
-
7/18/2019 GEOMASH - Product Catalogue
7/53
Applied tools:
sets of drilling tool with augers, with diameters of 135, 180, 230, 300,
330, 350, 400 mm
sets of hollow-stem augers, with diameters of 200, 250, 320 mm
sets with bores, with diameters of 650, 850 mm
set of drill tools for percussion drilling
set of drill tools for core dry/mud/air drilling
set of drill tools for drilling by continuous face with mud/air drilling DTH hammers and bits for them
Product identification number PBU-2
Hole depth, up to, meters
Auger drilling 60
Auger bore drilling 25
Auger bore sliding along the rods 16
Mud Rotary drilling 100-120
Air Rotary drilling 100
DTH drilling 50
Hole diameter, up to, mm
Auger drilling 400
Auger bore drilling 850
Mud Rotary drilling 215.9*
Air Rotary drilling 250 *
DTH drilling 250
Rotary Drive
Rotary Torque, up to, kgm 500
Rotary speed, rpm 25-430
Hydraulic Feed System
(depends on model)
Feed Stroke, mm 1800; 3500**Retract force, kgf 3500-10000**
Pushdown force, kgf 3500-10000 **
Winch
Type Free fall,
mechanically driven
Load carrying capacity, kgf 2600 PBU-2drillrig
* - depending on applied pipes
** - depending on modification
6
Technical characteristics
-
7/18/2019 GEOMASH - Product Catalogue
8/53
Multipurpose drilling rig LBU-50
The multi-purpose LBU-50 drilling rig with a mechanical drive of a mobile rotatoris intended for drilling of wells of different function when performing construction
works, technical, hydrogeological and water supply, engineering researches and
prospecting works.
Drilling rigs of the LBU-50 series possess high rates of technical characteristics
and modern constructive decisions: range of frequency of rotation of 14-220
revolutions per minute allow to use various boring tools, including hard-alloy
crowns, bladed and rolling drilling bits, carriage course - 3900 mm makes it
possible to use elements of the bottom hole assembly and drill pipes with a
standard length of 3200 mm - 3500 mm hydraulic mud pump or compressors
allows to smoothly change their performance
All models of LBU-50 provide a wide range of drilling methods:
auger drilling auger bore (raisen) drilling
DTH drilling
fluid circulating/Air rotary drilling
soil sampling
Cone Penetration Tests
LBU-50 drill rigs are the most powerful multipurpose plants manufactured by
Geomash provide high efficiency and productivity of waterwell, foundation,
geotechnical drilling at high equipments reliability.
This Rigs can be mounted on different chassis and driven by its engines by P.T.O.
Leveling system
Up to 6 hydraulic jacks
Features
Hydraulically driven mud pumps or compressors
Rotary Head Swing Out System mechanically driven
Detachable operator platform
Tool platforms
Multipu
rposedrillingrigL
BU-50
7
-
7/18/2019 GEOMASH - Product Catalogue
9/53
Equipment set upon request:
Piston type compressors
Mud pumps
The balance weight for cable-percussion drilling and hole cleaning
Set of accessories for DTH drilling
Welding generator
The aligning adaptors for augers
Break-out hydraulic wrench
Drill pipe holder
Casing pipe holder
Applied tools
sets of drilling tool with augers, with diameters of 135, 180, 230, 300,
330, 350, 400 mm
sets of hollow-stem augers, with diameters of 200, 250, 320 mm
sets with bores, with diameters of 650, 850 mm
set of drill tools for percussion drilling
set of drill tools for core dry/mud/air drilling
set of drill tools for drilling by continuous face with mud/air drilling
DTH hammers and bits for them
Multip
urposed
rillingrig
LBU-50
60
25
16
200
100
50
500
850
190.5
190.5
550
2000
14-220
12000
4000
2500
Hole depth, up to, meters:
auger drilling
augerbore drilling
auger bore sliding along the rods
mud rotary drilling
air rotary drilling
DTH drilling
Hole diameter, up to, mm:
auger drilling
auger bore drilling
mud rotary drilling
Air Rotary drilling
DTH drilling
Rotary Torque, up to, kgm
Rotary speed, rpm
Feed Stroke mm 3300 or 3900
Retract force, kgf
Pushdown force, kgf
winch
type Free fall
load carrying capacity, kgf
8
Technical characteristics
-
7/18/2019 GEOMASH - Product Catalogue
10/53
L
BU-50-3
0drilling
rig
Multipurpose LBU-50-30 drilling rigwith a hydraulic drive of a mobile rotator
Purpose:
drilling of hydrogeological wells
drilling of water supply wells
drilling of wells of different function when performing construction works,
engineering researches geological exploration
The rig provides:
drilling by augers with a diameter up to 500 mm
drilling of holes with a diameter of 1050 mm
shock and rotary drilling with a diameter up to 550 mm
with use of submersible pneumoshock cars
drilling with fluid circulating/airflush with a diameter up to 490 mm
"dry" core drilling with a diameter up to 172 mm
percussion drilling with a diameter up to 168 mm
High rates of technical characteristics and modern constructive
decisions:
rotation frequency range of 0 - 200 rpm allows to use various boring tools,
including hard-alloy crowns, bladed and auger chisels
feed stroke of 3900 mm gives the chance to use bottom elements of the
boring column and boring pipes of standard length of 3200 mm - 3500 mm
hydraulic actuator of the boring pump or compressors allows to change their
productivity smoothly
The rigs can be mounted on the chassis of various trucks, including KAMAZ,
URALS.
9
-
7/18/2019 GEOMASH - Product Catalogue
11/53
L
BU-50-3
0drilling
rig
60
25
16
200
100
50
500
850190,5
190,5
550
2000
14-220
12000
6200
3000
Hole depth, up to, meters:
Auger drilling
Auger bore drilling
Auger bore sliding along the rods
Mud Rotary drilling
Air Rotary drilling
DTH drilling
Hole diameter, up to, mm:
Auger drilling
Auger bore drillingMud Rotary drilling
Air Rotary drilling
DTH drilling
Rotary Torque, up to, kgm
Rotary speed, rpm
Feed Stroke mm 3900
Retract force, kgf
Pushdown force, kgf
Winch
Type Free fall
Load carrying capacity, kgf
For alignment of rigs before operation hydraulic jacks are provided.
Equipment set (on demand):
boring pump NB-50
winch
clamping hydraulic table for upsetting pipes
work desk
tool transportation trailer
Applied tools:
sets of boring tools with augers with diameters of 135, 180,230, 300, 330, 350, 400, 500 mm
sets of augers with a constant internal diameter of 200, 250,
320, 470 mm
sets with drills with diameters of 650 and 850 mm
set with auger drills sliding on bars with diameters of 650, 850
and 1050 mm
set of boring tools for percussion drilling with diameters of 168 mm
set of boring tools for drilling of wells by the core "dry" / fluid
circulating/airflush method
set of boring tools for drilling by a continuous face with a fluid
circulating/airflush
submersible DTH tools with a diameter up to 550 mm
Technical characteristics
10
-
7/18/2019 GEOMASH - Product Catalogue
12/53
UGB drill rig
The self-propelled drilling rig UGB is designed to execute drilling of geological survey,
blast holes, hydrogeological various purpose wells at construction works and technical
wells of XII category of drill ability.
Application area:
construction engineering researches
search and assessment of underground resources
seismic exploration
water supply, hydrogeological researches
construction of piles and other special technical works
Applied technologies:
auger drilling with a diameter up to 300 mm
kelly drilling by bladed drills with a diameter up to 500 mm
dry rotary core drilling with the diameter up to 151 mm
rotary non-core drilling with fluid circulating of bladed and rolling drilling bits with a
diameter up to 244 mm
rotary core drilling with fluid circulating, including application of the diamond rock
cutting tool with a diameter up to 151 mm
rotary core and non core drilling with airflush application with a diameter up to 151 mm
shock and rotary drilling with airflush application with a diameter up to 250 mm,
including core drilling with the diameter up to 140 mm
percussion drilling with a diameter up to 168 mm
static and dynamic sounding of soil in accordance with GOST 19912-2001
UGB rigs can be mounted on wheel and caterpillar transport bases, including
GAZ-33081 of "Sadko", URALS, KAMAZ, GAZ-34039, TGM (MTLBU), T-147, TM-130,and also on the sled bases.
UGB
DrillRig
11
-
7/18/2019 GEOMASH - Product Catalogue
13/53
Equipment supplied on request
plunger pump NB-160 / 6.3 (6.3 MPa pressure, flow -160 l / min)
plunger pump P62/160-100V (Germany) (pressure 10 MPa, flow - 160 l / min)
centrifugal pump SPECK 50/250 (Germany) (pressure 1.4 MPa, flow - 1200 l / min)
piston pump NB-50 (pressure 6.3 MPa, flow - 700 l / min)
compressor NK 160 (Germany) (pressure - 1.5 MPa) feed-7.3 m3/min, -9/10
(pressure - 1.0 MPa) feed - 9 m3/min, KV-12/12 (pressure - 1.2 MPa, feed - 12 m3/min)
ydraulic drive balancer
block tube holder
tube holder
tightened threaded connections breaker
upsetting hydrodriving table (SOG-000)
set of dynamic sounding (KDZ)
welding generator
load-lifting accessories for work with the winch
adapters for boring tool and rotator spindle connection
Product identification number UGB
Conditional drilling depth, m:
- auger drilling, with diameter 135 mm 40
- auger drilling, with diameter 300 mm 12
- mud rotary drilling, with diameter 93 mm 300*
- air rotary drilling, with diameter 151 mm 80
- DTH drilling, with diameter 250 mm 30
- churn drilling, with diameter 146 mm 35-40
Hydraulic Feed System
Feed Stroke, mm 2.2; 3.4; 5.2*
Retract force, kgf 4000-6000*
Pushdown force, kgf 2000-3000*
Torque, kgm 350
Maximum rotation speed, rpm
I diapason 10-320
II diapason 10-710
Load-carrying capacity of the winch, kgf 1000/3000
The angle between the hole and the horizon, grade 50-90
* - depending on modification
Technical characteristics
UGBDrillRig
12
-
7/18/2019 GEOMASH - Product Catalogue
14/53
Mobile Drilling Rig MBU 320
Application purpose:
engineering-geological wells drilling
exploration and appraisal wells drilling
seismoprospecting wells drilling
MBU 320 carries out effective auger, and also diamond cores drilling.
It is mounted on the caterpillar track vehicle GTM-0.8 that allows to use the
drilling rig in remote areas and in cross-country conditions.
The hydraulic system of the drilling rig is given
from the transport base engine.
GTM-0.8 is a unique vehicle in a class of domestic caterpillar track vehicles
with a loading capacity up to 1.5 tons.
The efficient diesel GTM-0.8 engine with a capacious fuel tank provides an
action radius to 500 km.
Standard MBU 320 equipment
feed motion stand
hydraulically actuated rotator
oil station with a cooling and purifying system
control panel
mechanical support footing
fenced platform for transportation of pipes and helical conveyers
internal combustion engines with a bonnet
lighting equipment
MobileDrillin
gRigMBU320
13
-
7/18/2019 GEOMASH - Product Catalogue
15/53
MobileDrillin
gRigMBU320
1400
4000
1820
2200
4850
2070
Feeding stroke, mm
Feeding force max., kgf
Spindle rotation frequency, rpm
Torque, kgfm
Cable pulling force, kgf
Height to an axis of a rownblok, mm
Overall dimensions
in transport position, mm:
- height
- length
- width
Mass of the plant, kg
Drilling depth with a diameter of 59 mm
Maximum drilling diameter, mm
Unit ground pressure kg / cm
Speed, km / h
Cruising range, km
Seating capacity in the cabin
Mass of the towed trailer, kg
Technical characteristics: MBU-320-00 MBU-320-00-01
1500
0.0...700
150
1000
2390
5030
3200
100
230
0.11
40
500
3
1500
Equipment set on demand
KV-5/10 mobile compressor station
NB1-25/16 pump station
plunger or centrifugal pump
moto-pump
hydrohammer for corers immersion
winch with free dumping function
crown block with extenders work desk for holding forks, screw conveyer casing centralizer
grease-retainer
frame pipe elevator
auger adapter
winch accessories
hydrodriving set of dynamic sounding
core borings expression device
soil samples box
auxiliary tool box
tent and boards for the cargo platform
warming of the cabin and engine for work in northern conditions
seat belts in the cabin
additional fuel tank GLONASS navigation equipment
Dimensions of the GTM-0.8 ensures transportation on public
roads with a standard width of the loading platform
14
-
7/18/2019 GEOMASH - Product Catalogue
16/53
M
obileDrillingRigM
BU
Mobile drilling rig MBU
Field of application:
engineering research
linear research at construction of oil and gas pipelines
seismic exploration
geological exploration and hydrogeological works
The plant provides:
drilling by auger conveyors with a diameter up to 250 mm
"dry" tube sample boring with a diameter up to 151 mm
drilling with washing/blowdown with a diameter up to 151 mm
drilling with application of submersible pneumatic impact tools
with a diameter up to 250 mm
percussiondrilling with a diameter of 127 mm
MBU is mounted on the following chassis:
GAZ-3897"Eger";
Caterpillar BV-206 "Hagglunds" all-terrain vehicle (Sweden);
GAZ-330273 "Gazelle";
Caterpillar off-roader GTM-0.8.
MBU is driven by an autonomous ICE or by the engine of the transport base
15
-
7/18/2019 GEOMASH - Product Catalogue
17/53
M
obileDrillingRigM
BU
Technical characteristics
Applied tools:
sets of boring tools with augers: - with a diameter of 135 mm
- with a diameter of 180 mm- with a diameter of 230 mm
sets of hollow augers for immersion of explosive charges with a threadedconnection: - with a diameter of 108 mm
- with a diameter of 132 mm
sets of hollow augers with diameters of 200 and 250 mm for construction ofbored and augercast piles with keyed and bolted connections
auger drill sampler with a diameter of 185 mm
tool sets for core drilling by diamond drill bits with diameters of 46-151 mm andhard-alloy crowns with diameters of 59-151 mm on TBSU-43 and TBSU-63.5boring pipes
tools for drilling by bottomhole DTH tools with a diameter up to 250 mm
diamond drills with a diameter up to 250 mm
tool sets for sampling of undisturbed structure by punchdown corers with adiameter up to 121 mm
rolling, blade drilling bit with a diameter up to 146 mm
punchdown sell, bailer with a diameter up to 127 mm
Equipment set on demand:
hydrodriving winch with free dumping, load capacity-1000 kg
mobile compressor station KV - 5/10P
pump station with NB1-25/16 (drive from ICE or an electric motor)
motor-pump (depending on the chassis)
core expression device
dynamic sounding set
mechanical bars extractor
hydrodriving pipe holder
* - Determined by the mass the installation
Feeding stroke, mm 2200
1500/1500*
Spindle rotation frequency, rpm 0-700
0.4
Length of the boring pipe (augers), mm:
- at rotary drilling 1700/1500
- at DTH drilling 1500
150
Spindle drift diameter, mm 52
1000
Power of the petrol/diesel drive 25.7/17.7
Drilling diameter, max., mm 250
- augers with a diameter of 250 mm 10
- augers with a diameter of 135 mm 25
- fluid circulating drilling with a diameter of 46 mm to 100
- airflush drilling with a diameter of 112 mm 50
50
- percussion drilling method with a diameter of 127 mm 30
Feeding force up/down, max., kgf
Feed speed, m/s
Torque, max., kgm
Winch loading capacity, kgf
Conditional drilling depth, m:
- DTH tools with a diameter of 250 mm
16
-
7/18/2019 GEOMASH - Product Catalogue
18/53
BBU000
"OPENOK
"compac
tdrillingr
ig
250
25
10050
50
1.4
900
0.4
1500/1500
0-45 and 90
0-700
150
23/ 17.7/ 15.0
560580
600
70
2100/800/1800
4200
Drilling diameter, max, mm
Hole depth, m:
- augers drilling with diameter 135 mm
- diamond drilling with diameter 46 mm- DTH drilling with diameter 250 mm
- rotary air drilling with diameter 112 mm
Feed stroke, m
Mast sliding with damping, mm
Feed speed, m/s
Pull up/Pull down, kgf
Mast inclination angle, grade
Rotary speed range, rpm
Torque, max, kgm
Power, kWt:
- gasoline engine/ diesel engine/ electric motor
Dimensions and Weights
Weight of mst and winch as assembly, kg:
- with gasoline engine- with electric motor
- with diesel engine
Weight of each module, kg, approx.
Outline dimensions, mm:
- working position (height, width, length)
- height with additional mast and winch, mm
COMPACT DRILLING PLANTS BBU 000 "OPENOK" and BBU 001 "OPENOK- S"with a hydraulically driven power swivel
Integrated BBU 000 "OPENOK" drilling rig
The plant consists of the following blocks:basis, directing feed-motion mechanism stand, rotator, engine (petrol, diesel,
electric motor) with oil pumps, oil tank with sleeves, control panel with a heat exchanger.
Installations driven from the ICE are equipped with an accumulator and a gasoline
tank. Delivery of the BBU-000 without disassembling blocks and without inclined
drilling is possible (series 20).
Features of the plant:
drilling of vertical, horizontal and inclined * wells
blocks and knots fixed on the basis can be removed and placed in a place, convenient
for service, at a distance determined by length of sleeves of the hydraulic system
for installation and dismantle of blocks and knots, connections of hydraulic sleeves
by means of quick release connections *
stand with the mechanical feeder is supplied with telescopic struts for increase
of its stability in inclined position under the influence of axial loading and rotating torque to increase of installation stability when drilling the stand has a system of "dumping"
(longitudinal transposition of the stand up to the stop at soil contact with fixing) *
The plant is transported by means of a small aircraft, vehicle and caterpillar transport
with a loading capacity from 800 kg, manual work within the object - block by block.
Shipment of BBU-000 assembly sets is possible on vehicles of the correspondingloading capacity: autochassis UAZ, GAS and caterpillar off-roaders.
engineering researches, also in constrained conditions
linear researches at construction of oil and gas pipelines
seismic exploration
construction of piles when strengthening the bases, replacing of the building base at reconstruction,
strengthening of slopes, support, including in basements
geological exploration and hydrogeological worksApplied technologies:
auger drilling with a diameter up to 230 mm
sampling by an auger sampler with a diameter up to 185 mm
"dry" rotary core drilling with the diameter up to 151 mm
rotary drilling with fluid circulating/airflush circulating with a diameter up to 151 mm
percussion drilling with application of submersible pneumatic impact tools with a diameter up to 250 mm
dynamic sounding of soil in accordance with GOST 19912-2001 (when equipped with the dynamic sensing set)
impact pipe drilling by a hydrohammer
percussion drilling when using the winch with a loading capacity of 1000 kgf
Application area:
* - except for BKB 000 series 20 plants
** - depending on the engine type
Technical characteristics
17
-
7/18/2019 GEOMASH - Product Catalogue
19/53
Self-propelle
ddrilling
rigBBU-0
001Ope
nok-S
Equipment set (on demand) of the BBU 000 and BBU 001
mast with the hydrodriving winch for hoisting operations
various length mast extenders
set for self-towage and rig loading
set for fluid circulating drilling including a motor-pump
device of expression of a core (UVK)
set of dynamic sounding (KDZ)
mechanical bar extractor
pump station with NB1-25/16 with the drive from ICE or the electric motor
mobile compressor station
Drilling tools
set of drilling tools with augers
diameter 135 mm, length 1090 mm
diameter 180 mm, length 930 mm
diameter 230 mm, length 923 mm
set of hollow augers for penetrtion of blasting charge with threaded connection
set of augers of equal diameter of 200 mm or 250 mm for construction of bored
piles with key and bolted connections
auger sampler with diameter 185 mm
set of drilling tools for core diamond drilling d=46-151 mm and tungsten carbidedrilling d=59-151 mm using drilling pipes TBSU-43 and TBSU-63,5
drilling tools for drilling with bottom pneumatic hammer d= 76 mm, 93 mm, 112 mm
diamond drill bit with diameter up to 250 mm
sets of drilling tools for sampling using drive-in bullet d=121 mm
Self-propelled drilling rig BBU-0001Openok-S
The drilling rig is mounted on a caterpillar cart which is driven via a hydraulic system.
The cart speed makes 1,9 km/h.
Features of the drilling plant:
provides drilling of inclined wells not only in longitudinal, but also in cross planes
stand with the feeder is ser to working/transport position by a hydraulic cylinder
for increase of stability the directing stand is equipped with the mechanism
of longitudinal movement of the stand to the stop at soil contact.
governing bodies of installation are placed on main and auxiliary panels.
Traffic control of the caterpillar cart is carried out remotely from the portable panel.
Drilling diameter, max, mm
Hole depth, m:
- augers drilling with diameter 135 mm
- diamond drilling with diameter 46 mm
- DTH drilling with diameter 250 mm
- rotary air drilling with diameter 112 mm
Feed stroke, m
Mast sliding with damping, mm
Feed speed, m/sPull up/ Pull down, kgs
Mast inclination angle, grade
Rotary speed range, rpm
Torque, max, kgm
Power, kWt:
gasoline engine/ diesel engine/ electric motor
Weight of mast and winch as assembly, kg
- with gasoline engine
- with electric motor
- with diesel engine
Weight of each module, kg, approx.
Outline dimensions, mm
- transport position
- working position (height, width, length)
- height with additional mast and winch, mm
250
25
100
50
50
1,4
900
0,41500/1500
0-45 and 90
0-700
150
17,6/17,7/15,0
560
580
600
70
1550/800/2200
2050/1400/2300
4890
Technical characteristics
18
-
7/18/2019 GEOMASH - Product Catalogue
20/53
USH-2T
4drillingrig
AZA-3 drilling rig with a mobile rotator
The rig provides:- mechanization of anchor installation when fastening
extensions of oil-field towers and masts,
communication towers, support of power lines
- drilling of holes for anchors
-drilling of pilot boreholes for screw anchors in stony
and frozen soil
- drilling of technical wells of different function
Z-3 is mounted on truck base.
AZA-3 is driven by P.T.O of the truck's engine.
AZ
A-3
dr
illin
g
rig
Technical characteristics
50
25
4,5
500
850
350
2000
14-101
3250
12000
4000
Hole depth, up to, meters:
Auger drilling
Auger bore drilling
Screw - in anchor drilling
Hole diameter, up to, mm:
Auger drilling
Auger bore drilling
Anchor plunging
Rotary Drive
Rotary Torque, up to, kgm
Rotary speed, rpm
Hydraulic Feed System
Feed Stroke, mm
Retract force, kgf
Pushdown force, kgf
19
-
7/18/2019 GEOMASH - Product Catalogue
21/53
20
-
7/18/2019 GEOMASH - Product Catalogue
22/53
The multi-purpose USH-2T4/2T4V
drilling rig with the mechanical drive of a mobile rotator is intendedfor drilling of seismoprospecting, search and evaluating,
engineering-geological and technical wells, and also wells of
different function when performing construction works.
Purpose:
seismic exploration
drilling of exploration and appraisal wells
engineering research
drilling of wells of different function when performing
construction works
The rig provides
drilling by augers with a diameter up to 330 mm / 650 mm for
USH-2T4V
shock and rotary drilling with a diameter up to 250 mm with
application of submersible DTH cars
"dry"core drilling with the diameter up to 151 mm
The USH-2T4 is mounted on a T10B2121 catarpillar chassis that
allows to use the rig on soil with small load bearing capacity
(swamps, snow covers, defrosted frozen soil, etc.).
The drive is carried out from the engine of transport base.
USH-2T
4drillingrig
USH-2T4drillingrig
21
-
7/18/2019 GEOMASH - Product Catalogue
23/53
Applied tools:
sets of boring tools with augers with diameters of 135, 180, 230, 300, 350,
400 and 500 mm
sets of augers with a constant internal diameter of 200, 250, 320 mm
set of boring tools with hollow augers with diameters of 110 mm
(internal - 50 mm) and 150 mm (internal - 70 mm)
boring tools of various diameters for drilling with airflush, including DTH.
Technical characteristics
60
100
50
300/650
190,5
250
750
40-240
3250
12000
6000
Hole depth, up to, meters:
Auger drilling
Air Rotary drilling
DTH drilling
Hole diameter, up to, mm:
Auger drilling
Air Rotary drilling
D-T-H drilling
Rotary Drive
Rotary Torque, up to, kgm
Rotary speed, rpm
Hydraulic Feed System
Feed Stroke, mm
Retract force, kgf
Pushdown force, kgf
USH-2T4drillingrig
22
-
7/18/2019 GEOMASH - Product Catalogue
24/53
The new construction drilling rig
USG-010For the first time in Russia a domestic producer created a pile drilling
rig with a telescopic Kelly-bar and a casing oscillator of its own design.
Pile rotary drilling rig USG-010 is designed for well drilling in
construction of bored and secant piles to carry out foundation works in
the industrial and civil construction.
Telescopic Kelly-bar, ensures the transmission of torque and axial
loads from the rolling of the rotor and can be used with auger, bucket
and core drills without any adaptors.
The design of the USG-010 drilling rig provides:
- drilling of unstable moisture, saturated soil under protection of a
column of upsetting pipes, immersion and extraction of witch is
carried out by a rotator, and in difficult geological conditions by a
casing oscillator;
- construction "in soil wells" by secant pile row construction .
Installation is mounted on the chassis of the crawler excavator and
driven from its main engine.
Identifying features of the plant:
- telescopic bar, boring tool and casing oscillator of Geomash
development and production
- equipped with boring tools and equipment that allows to work in
various geological conditions
- maneuverable track laying vehicle and a rotary platform for
conducting of drilling operations on limited spacesUSG-01
0Drillrig
23
-
7/18/2019 GEOMASH - Product Catalogue
25/53
140 (14000)
1500
1000
24*
125
120 (12000)
100 (10000)
4500
0-30
0.4/0.3
15/5/3
10000
22/68
8000
18/40
18460
3200
7800
45500
3650
3200
7750
32600
750
26500
10600
4000
850 (85000)
800 (80000)
1000880, 800, 750, 620
1214/1920/3190
6000
Max torque on the rotor, kNm (kgf * m)
Maximum diameter of drilling, mm
Maximum diameter drilling with casing table, mm
Drilling depth
Rig is mounted:
on the chassis crawler
excavator EO-4225A and isdriven from its main engine
- engineJAMZ-238GM2, diesel, four-
stroke, 8-cylinder
- operating power drive, kW
Maximum axle load on the rotor, kN (kg)
- upwards
- downwards
Length of rotor movement, mm
Speed, rpm
Speed, up / down, mps
The angle of mast backward / forward / to the side,grades
Main winch
- lifting capacity, kg
- diameter of cable, mm / length, m
Auxiliary winch
- lifting capacity, kg
- diameter of cable, mm / length, m
Overall dimensions in the working position
- height, mm
- width, mm
- length (with casing table), mm
- weight of the rig with kelly-bar, kg
Overall dimensions in the transport position
- height, mm
- width, mm
- length, mm
- weight, kg
- track width,
Telescopic Kelly bar The length of the kelly-bar,mm:
- in the unfolded
- in the folded position
- connection with the tool box, mm 200 200
- mass of Kelly bar, kg
Casing table
- maximum force recovery of casing pipes, kN (kg)
- maximum torque, kNm (kgf * m)
- maximum diameter of casings pipes, mm- complete with inserts for casing pipes, mm
- height / width / length, mm
- weight of the casing of the table, kg
Technical characteristics
USG-01
0Drillrig
* - The depth of drilling may increase through the application of kelly bars
of different sizes
24
-
7/18/2019 GEOMASH - Product Catalogue
26/53
Drillin
g-cranem
achineB
KM3
00series
Drilling-crane machine BKM 300
BKM 300 series are used for:
- electro network construction for Kelly drilling of wells with installation in them of the 0,4-10 kV high voltage
line support
- industrial and civil engineering for drilling of the pile bases wells, fence columns, road signs and other types
of works
Drilling depth - 3 meters.
Features and technical solutions:
- high performance and functionality
- hydraulic drive of the rotator provides a choice of optimum drilling modes
- reinforced construction of the base frame of the vehicle
- increased crane equipment capacity (in comparison with analogues) - 2 tons
- optimum configuration of the plant provides access to main components of the BKM
- strengthened boring bar
- management of all technological processes from one panel
- control panel is mounted in the car body, the workplace is equipped with a seat
BKM 300 difications:BKM-350 on the GAZ-33081 chassis, BKM-360 on the GAZ-33081 chassis with
a two-row cabin, BKM-370 on the "Belarus" MTZ-92P chassis, BKM-371 on the "Belarus" MTZ-82.1 chassis.
Technical characteristics
Additional BKM-300 and BKM-550 equipment:
Detaching device (RU.00.00.000) for safe performance of electric installation
work on shabby wooden footings of the high voltage line.
* - Average well drilling time with a diameter of d = 500 mm on a depth of 3 meters on not frozen soil
of the III drilling capacity category.
3
- BKM-350 (360) 60-105
- BKM-370 (371) 60-105
- BKM-350 (360) 5800(580)
- BKM-370 (371) 5000(500)
- BKM-350 (360) 0..250
- BKM-370 (371) 0..200
24,5 (2450)
32 (3200)
20 (2000)
6.8
15*
BKM-350 (360):
7000
2340
4000 (3900)
BKM-370 (371):
6470 (7550)
2550 (2500)
4000 (3980)
Maximum drilling depth
Drilling diameter, mm250, 360, 500,
630, 800
Drilling angle, degrees:
Torque, max., Hm (kgf*m):
Boring tool rotation speed, rpm:
Feeding pressure., kH (kgf), no less than:
- down
- up
Winch loading capaci ty, max., kH (kgf)
Hook raising height, max., m
Average well drilling time d=500 of mm, min
Overall dimensions in transport position, mm
- length
- width
- height
- length
- width
- height
25
-
7/18/2019 GEOMASH - Product Catalogue
27/53
Drilling
-cranem
achineBK
M-
550
BKM- 550 are used for:
- electro network construction for Kelly drilling of wells with installa-
tion of high voltage line support up to 35 kV;
- road construction for drilling and installation of bridge pylons and
fence columns;
- carrying out of various works in oil and gas industry, including at
construction of transit pipelines and electro highways, arrangement
of oil and gas pipelines.
Drilling depth - 5 meters.
Existence of scale-free regulation of rotation speed and drilling tool
feed provides a choice of the optimum drilling mode depending on
hardness and structure of soil.
High torque allows to reduce well construction time.
Spindle rotation frequency allows to achieve effective cleaning of
the auger drill from muck.
Main boring tool type - bladed drill with diameters of 250, 360, 500,630, 800 mm.
Control panel is mounted on a car body.
BKM-550 is mounted on a KAMAZ (4x4).
Drilling-crane machine BKM - 550
* - Average well drilling time with a diameter of d = 500 mm on a depth of 3 meters on not frozen
soil of the III drilling capacity category.
Technical characteristics
5000(500)
60-105
0..200
24,5 (2450)
32 (3200)
20 (2000)
7.7
15*
8700
2500
3550
Maximum drilling depth
Drilling diameter, mm250, 360, 500,
630, 800
Drilling angle, degrees
Torque, max., Hm (kgf*m): to 5800 (580)Boring tool rotation speed, rpm:
Feeding pressure., kH (kgf), no less than:
- down
- up
Winch loading capacity, max., kH (kgf)
Hook raising height, max., m
Average well drilling time d=500 of mm, min
Overall dimensions in transport position, mm
- length
- width
- height
26
-
7/18/2019 GEOMASH - Product Catalogue
28/53
* - frame of strengthened design
Caterpillar transport vehicle GTM-0.8
Caterpillar transport vehicle GTM-0.8 is a unique transport vehicle in
the field of domestic caterpillar transporters with the load carrying
capacity up to 1.5t.*
GTM-0.8 is driven by a Kubota V3800-T (Japan), 84.5HP diesel
engine. Power of the attached equipment is taken off via the PTO.
The transporter can be delivered in passenger and cargo-and-pas-
senger versions or it can be used for various equipment transporta-
tion.
Application area:
Equipment installation
- Load carrying capacity of the transporter allows to use it as drillingequipment chassis.
Oil and gas industry
- milling tool installation for remediation of contaminated soil by oil at
full or emergency repair of the oil pipelines;
- oil pipelines patrolling;
- rescue operations (transport of emergency operations service).
Fire-fighting
- personnel and equipment transport;
Energy sector
- electric transmission lines and energy distribution network mainte-
nance;
- transmission lines patrolling.
Forest sector and planting of greenery
- right-of-way forest clearing and right-of-way maintenance;
- clearing of industrial value territory and building sites preparation.
Advantages of the GTM-0.8:
-Reliable units: GAZ-71 transmission, undercarriage is on base of
support rollers and caterpillar GAZ-71. Safety of these units is
verified by completed GTM operations in tundra forests in Western
Siberia and Nenets Autonomous District tundra.
- Low ground pressure (makes the transporters usage possible in
soils with low load carrying capacity, i.e. bogs, snow).
- Small width clearance (1,87m) and light weight (from 3t to 4t) allows
to use the transporter in forested terrain with minimal damage to the
environment and also to transport it by unspecialized cargo motor
vehicles.
- Tightness of the case and existence of boards of the TGM allows to
overcome water barriers.
- Efficient diesel engine and low fuel rate 5..6 l/h (fuel distance -
400km, fuel tank 70l).
- Spare parts availability.
- Large area of cabin glazing provides clear vision at the movement
on cross-country terrain.
- High maneuverability.
aterpillartransportvehicleGTM-0.
8
27
-
7/18/2019 GEOMASH - Product Catalogue
29/53
aterpillartransportvehicleGTM-0.
8
Technical characteristics:
Dimensions, mm max:
- Length
- Width
- Cab height
- Wheel track
- Outer track support roller base
Load carrying capacity, kg max
Weight with cargo, kg max
Outline dimensions of loading platform, mm
- Length
- Width
Maximum speed, km/h
Swimming speed, km/h
Passenger number in cabCaterpillar width, mm min
Ground pressure, kg/cm2max
Passenger
version
45502040
2315
1420
2400
200
3800
1300
1600
40
3
6600
0.13
Cargo version
(caterpillar 800mm)
45502440
2315
1620
2400
600
3800
1300
1600
25
3,5
2800
0.11
Cargo version
(caterpillar 600mm)
45502040
2315
1420
2400
800
3800
1300
1600
40
3
2600
0.13
Safety
While designing the transporter personal safety was a top priority.
The GTM-0.8 construction provides drivers safety in case of accidents.
Wide side doors with convenient hand grips make easier entrance
and exit of personnel.
28
-
7/18/2019 GEOMASH - Product Catalogue
30/53
aterpillar transport vehicle GTM-0.8R
GTM-0.8R is a caterpillar transport vehicle which is assigned for contaminated
soil remediation. It is provided with a hydraulically driven milling tool with an
operating width of 2.0m. GTM-0.8R is driven by a diesel engine Kubota V3800T,
97.6HP.
Today GTM-0.8R with the remediation equipment is the only merchantable
solution for elimination of emergency oil and oil products spills.
The advantages are the following:
- Combined body hermeticity and low contact pressure factor of the
caterpillar transporter provides its effective use in boggy soil; in thick snow
cover; allows to overcome offroad and water barriers. The transporter does
minimum damage to soil and vegetative cover when being used in summer
time in tundra and forest tundra. - Efficient diesel engine with a spacious fuel tank provides a cruising range of
the transporter up to 400km.
- Reliable, time-proved main gear and steering clutch control of GAZ-71
have durable life time; they are simple and effective in service.
- Transporter small size allows using it effectively in forest areas and it
makes possible to ship it on the vehicle with a standard width of carrier deck
on public-access roads.
- Spacious cab of the transporter, designed according to ergonomic
demands, provides necessary view in contrast to adapted demilitarized
crawler transporters; operational comfort for the driver and the passenger; it
is equipped by firm and proper seats, the drivers seat is supported by
springs and it can be adjusted according to the drivers weight; electric
(mechanical) screen wipers are attached to its windscreens. Transporter
control is comfortable and ergonomic.
- Road clearance is 480mm. It is the highest rate among the amphibian
vehicles and it provides superior cross-country capacity.
aterpilla
rtranspo
rtvehicle
GTM-0.8
R
29
-
7/18/2019 GEOMASH - Product Catalogue
31/53
While designing the transporter personal safety was a top priority.
The GTM-0.8R construction provides drivers safety in case of
accidents. Wide side doors with convenient hand grips make
easier entrance and exit of personnel and together with the upper
emergency hatch guarantee urgent escape.
The emergency hatch can be opened in and out.
The offorader GTM-0.8 R vehicle can be shipped in passenger
and cargo-and-passenger versions.
Technical characteristics:
Outline dimensions in working position, mm max:
- length
- width
- cab height
- wheel track
- outer track support roller base
load carrying capacity, kg max
weight with cargo, kg max
speed, km/h:
- maximum
- minimum stable (at 15000 rpm)
- rated operational
swimming speed, km/h
swimming speed with lowered down milling tool, km/h
passenger number in cab
caterpillar width, mm min
ground pressure, kg/sm2 max
milling tool:
- operating width, mm
- milling tool drive
- milling rotor diameter (by blade ends), mm
- twisting force on blade edge, kgf
- rotor rotation frequency at rated operational speed, rpm
- Milling dipping depth below the surface, mm
Caterpillar 600mm
5420
2040
2315
1420
2400
200
3900
25
1.1
2
3
7-8
2
600
0.13
2000
hydraulic
500
480
to 600
270
Caterpillar 800mm
5420
2440
2315
1620
2400
200
4000
25
1.1
2
3
7-8
2
800
0.11
2000
hydraulic
500
480
to 600
270
aterpillartransportvehicleGTM-0.
8R
30
-
7/18/2019 GEOMASH - Product Catalogue
32/53
-
7/18/2019 GEOMASH - Product Catalogue
33/53
-
7/18/2019 GEOMASH - Product Catalogue
34/53
-
7/18/2019 GEOMASH - Product Catalogue
35/53
-
7/18/2019 GEOMASH - Product Catalogue
36/53
-
7/18/2019 GEOMASH - Product Catalogue
37/53
-
7/18/2019 GEOMASH - Product Catalogue
38/53
-
7/18/2019 GEOMASH - Product Catalogue
39/53
-
7/18/2019 GEOMASH - Product Catalogue
40/53
-
7/18/2019 GEOMASH - Product Catalogue
41/53
-
7/18/2019 GEOMASH - Product Catalogue
42/53
-
7/18/2019 GEOMASH - Product Catalogue
43/53
-
7/18/2019 GEOMASH - Product Catalogue
44/53
-
7/18/2019 GEOMASH - Product Catalogue
45/53
-
7/18/2019 GEOMASH - Product Catalogue
46/53
-
7/18/2019 GEOMASH - Product Catalogue
47/53
-
7/18/2019 GEOMASH - Product Catalogue
48/53
-
7/18/2019 GEOMASH - Product Catalogue
49/53
-
7/18/2019 GEOMASH - Product Catalogue
50/53
-
7/18/2019 GEOMASH - Product Catalogue
51/53
-
7/18/2019 GEOMASH - Product Catalogue
52/53
-
7/18/2019 GEOMASH - Product Catalogue
53/53
For equipment purchase
and additional information: