Genesis Version 2 Users Manuals3-ap-southeast-2.amazonaws.com/resources.farm1.mycms.me...genesis...

Genesi

Security-Access-Automation

s Version 2 Users Manual

Revision 2.03

Genesis Electronics Australia Pty Ltd http://www.genesiselectronics.com

genesis

Procedures and contacts .

Installer/Service contact: Monitoring company: Local police: In emergency, contact:

Version 2.03 Users Manual Page 1 of 27 September 2002

genesis

Table of contents

PROCEDURES AND CONTACTS ..................................................................................... 1

TABLE OF CONTENTS....................................................................................................... 2

WHAT IS GENESIS? ............................................................................................................ 3

HOW DO I???? A QUICK GUIDE TO FINDING ANSWERS....................................... 4

REMOTE ARMING STATION........................................................................................... 5

GETTING STARTED…… ENTERING YOUR PIN ....................................................... 6

ARMING AND DISARMING AREAS................................................................................ 7

OPENING DOORS................................................................................................................ 8

NAVIGATING THE MENU................................................................................................. 9

DISPLAY MENU................................................................................................................. 10

INPUTS MENU.................................................................................................................... 12

CONTROL MENU .............................................................................................................. 14

USER MENU........................................................................................................................ 16

PINS MENU ......................................................................................................................... 24

SETTING MENU................................................................................................................. 25

GLOSSARY.......................................................................................................................... 27


genesis

What is Genesis? For many years it has been possible to have either a powerful system – or, an easy to use system. Genesis provides both. Genesis provides state of the art technology to achieve reliable security, but…… Genesis is more than a security system. It not only keeps the wrong people out, but it can save you time, energy and money. It can automate tasks within the premises such as turning equipment on or off. This in turn can save money through reduced power consumption. It can also provide access control. That is, it is possible to specify who can go where and when. These features combine to provide peace of mind and convenience. Our aim is to be a part of your lifestyle, not a hindrance.


genesis

HOW DO I???? – A quick guide to finding answers

Turn on the alarm............................................................................. 7

Open an Access Control Door with the RAS.................................. 8

Use the menu options........................................................................ 9

See what happened last night......................................................... 10

Find an unsealed input ................................................................... 12

Isolate an input................................................................................ 14

Add a user ....................................................................................... 16

Delete a user .................................................................................... 16

Change my PIN............................................................................... 24

Change the time .............................................................................. 25


genesis

Remote Access Station

Key Function

to The numbered buttons on the keypad allow you to enter your PIN or enter

information.

This button is used to clear information or cancel an action. If in doubt at

any stage, press a couple times to exit out of the operation. It is

also used to enter the RAS menu .

This button is used to accept information, and to acknowledge messages.

This is used to arm an area, or turn on the displayed option.

This is used to disarm an area, or turn off the displayed option.

The Next button is used to view the next available option on the RAS.

The Previous button is used to view the previous available RAS option.

Output

Function

LED A

LED B

LED C

LED D


genesis

Getting Started…… Entering your PIN No changes or control can be started until the user enters their Personal Identification Number (PIN). There are two possible methods for entering your PIN, depending upon your user number.

Users 1-99 If you have a user number between 1 and 99, you only need to enter your PIN. In fact, you don’t need to know your user number. The procedure is:

Enter your PIN

Press

For example, if you are user 23 and your PIN is 5609 then you would press:

�

Users 102 upwards If you have a user number above 101, you must enter your user number and PIN. The procedure is:

Press

Enter your user number

Press

Enter your PIN

Press

For example, if you are user 123 and your PIN is 5609 then you would press:

� � � � �

Duress Code Feature Genesis has an option to alert your monitoring centre if you have been forced to disarm your alarm system under duress. ie. An intruder has threatened you, and is entering the premises with you under force. In order to activate the Duress Code, it is simply a matter of incrementing your PIN number by one (1) digit. ie. If your PIN number is 1234, your duress code would be 1235. The duress code will perform all normal system functions, including arming, disarming and entering menus, however it will send a Duress signal to your monitoring centre. Note: This function is only available if advised by your Installation company.


genesis

Arming and disarming areas An armed area will be monitored for intruders and generate an alarm. A disarmed area will not monitor its inputs and consequently can be entered without generating alarms. To select an area:

Enter your PIN, followed by � . The first available area will be displayed.

Press or until the required area is displayed.� � � � �

To arm an area press . If the area is successfully armed, the remote arming station will give a short beep and the description on the second line will change to secure.

To disarm an area press . If the area is successfully disarmed, the remote arming station will give a short beep and the description on the second line will change to access. For example, if your PIN is 5609, and you wish to arm area 2, you would press:


genesis

Opening Doors If your RAS has been installed as an access control device, it is possible to open a secure door with your PIN code. To open an access controlled door;

Enter your PIN, followed by .

If you have been provided with access to the door, the door will release temporarily.

For example, if your PIN is 5609, and you wish to open a door – you would enter;

Note: This function is only available if advised by your Installation company.


genesis

Navigating the Menu It is also possible to use the Remote Access Station (RAS) to control other functions of your system, and to interrogate it as to the systems current status. This is done through the use of the RAS menu functions. Users may not have access to some menu functions, depending on the level of access provided to their user number.

Enter the Menu Enter your PIN

Press

Press

.

The Genesis menu will appear.

Use the or � keys to navigate through the menu options as follows:

When the desired menu option is displayed on the RAS, press .


genesis

Display Menu – Area Status > Event Summary > Event History > Output Status The Display Menu allows the user to view the status of Areas, to view the system Event Log (in both summary and full history) and to view the status of the systems Outputs. To view any of these options:

Enter your PIN

Press

Press . The Genesis menu will appear, with showing on the screen

Press .

Use the or keys to navigate through the menu as follows:

When the desired menu option is displayed on the RAS, press


genesis

– Use the or keys to scroll through the areas, allowing you to see

their current status.

– Use the or keys to scroll through a summary of the event log,

with each event being time and date stamped. Use the key to view the

most recent event, and the key to view the least recent event.

– Use the or keys to scroll through the complete event log, with

each event being time and date stamped. Use the key to view the most

recent event, and the key to view the least recent event.

– Use the or keys to scroll through each of the outputs, allowing

you to see their current status.

Press at any time to exit from the menu currently being viewed.


genesis

Inputs Menu – Unsealed > Alarmed > Tampered > Isolated > Bypassed The Inputs Menu allows the user to view the status of inputs in any of the following conditions; Unsealed, Alarmed, Tampered, Isolated and Bypassed. To view the status of inputs in these conditions:

Enter your PIN

Press


Use the or keys to select the menu.

Press .




genesis

– Use the or keys to scroll through any inputs which are currently in an

unsealed condition.

– Use the or keys to scroll through any inputs which are currently in an

alarmed condition.

– Use the or keys to scroll through any inputs which are currently in a

tampered condition. Tampered inputs should be investigated promptly, as they represent a

possible breach of your security. If a tampered input resets, it should be tested to ensure that

it will still unseal and alarm when required.

– Use the or keys to scroll through any inputs which are currently

isolated. Isolated inputs will not register as being unsealed, and as such will not cause alarm

conditions.

– Use the or keys to scroll through any inputs which are currently

bypassed. Bypassed inputs will not register as being tampered with, and should be

investigated promptly. Inputs should only be bypassed when being serviced by your Service

Technician.



genesis

Control Menu – Isolate Input > Cancel Duress > Service Request > Modem on/off The Control Menu allows the user to control several functions including isolating of inputs, cancelling any duress signals and sending a service request signal to your control room. To use any of the control menu functions:

Enter your PIN

Press


Use the or keys to select the menu

Press .




genesis

– Use the or keys to scroll through the inputs, until you reach the input to

isolate or de-isolate. When the selected input is displayed, press � to isolate, or

press to de-isolate. Isolated inputs will not register as being unsealed, and as such

will not cause alarm conditions.

– If you have accidentally triggered the user Duress code, it is possible to send a Cancel

Duress signal to indicate this to a control room. After selecting this menu option, press

to activate the Cancel Duress function. It is recommended that the user then

contacts their control room to verbally confirm this cancellation as soon as possible.


– It is possible to send a signal to your control room to indicate a need for a service

technician to attend. After selecting this menu option, press to activate the Service

Request function.


– Reserved for Future Use



genesis

Users Menu – New User > Change User > Delete User > Change Pin > > Register Card > Remove Card > Suspend User

The Users Menu allows the user completely control who has access to the system through either the RAS(‘s) or Card Readers. It includes options allowing the user to add new users, change existing user setup, delete users and to simply change a users PIN number. It also allows the user to assign and remove cards from a users profile, and also allows the user to suspend a users details. To access the user menu options:

Enter your PIN

Press



Press .




genesis

After pressing will be displayed.

Enter the user number for the new user. Note that this is not the PIN but the actual user

number.

Press . will now be displayed.

Enter the PIN for this user number.

Press . will be displayed.

Use or to change the option if necessary. If turned on, adding one to

the PIN will result in a duress alarm. This can be entered into a remote arming station if a

person is forced to provide access to an intruder.


Use or to locate the required group. The group determines what areas

the user can arm, what doors they can access, and what menus they can use. The group

names and descriptions should be supplied to you by your Service Technician.



genesis

If an expiry date is required for the users code, enter it in the format of DDMMYY. For

example, 23rd January 2012 would be entered as 230012. If no expiry date is required

then leave the field blank.


If the user is required to change their PIN, enter the date for the user to change their PIN

in the format of DDMMYY. For example, 23rd January 2012 would be entered as

230012. If they can always use the same PIN then leave the field blank.


Use the keypad to enter the user’s name. To access the letters, press the key multiple

times. For example, to insert a S press � four times. Up to 15 Characters can

be entered for the users name. The format “J. Smith” for John Smith is recommended as

opposed to entering first name only.


Press .

You have now successfully added a user to the Genesis System.


genesis

Go to the User menu using the procedure described on page 11.

Press until is displayed.

Press .

Make changes to a users details as described in the New User instructions above.



Press .

will be displayed.

Enter the user number. Note that this is not the PIN but the actual user number.

will be displayed.

Press . The user is now deleted and will not have access to any RAS.


genesis




Enter the user number. Note that this is not the PIN but the actual user number.

Press . The user name will be displayed.

Press .� � will be displayed.

Enter the users new PIN and press � �

The users PIN has now been changed



genesis



Press .

will be displayed.

Enter the user ID. Note that this is not the PIN, but the actual user number. Press .

The users name will be displayed, along with a card number if already programmed.

Press . will be displayed

Present the users card to the reader attached to the RAS. The cards Facility code and

Card number will be displayed on the RAS. Press .

will be displayed on the RAS. Press .

The card will now be programmed to the user.


genesis



Press .

will be displayed.

Enter the user number. Note that this is not the PIN, but the actual user number.

Press .

The users name and card number will be displayed. Press to confirm that this is

correct, and remove the card from the user. Press if you do not want to remove

the card from the displayed user.

On pressing , will be displayed.

Press . The card has now been removed from the user.



genesis



Press .

will be displayed.

Enter the user number. Note that this is not the PIN, but the actual user number.

Press . The users name will be displayed on the RAS.

Press to suspend the user, or to put the user back in service.


Press . The user will have been suspended.



genesis

PINS Menu – (for changing own personal PIN) The PINS Menu allows the user to change their own user PIN only. It does not allow changes to any other users, or to any of the users settings. To change your own PIN.

Enter your PIN

Press

Press . The Genesis menu will appear, with showing on the

screen


Press .

is displayed on the RAS

Enter your new PIN and press

will be displayed.

Press . Your PIN will now have been updated


genesis

Settings Menu – Change Holiday > Set Time/Date

The Setting Menu allows the user to adjust the current time and date clock in the system, and to also change which days are to be treated as holidays. Holidays are used to override some functions. For example, it is possible to stop access on holidays, change the hours of operation or do an alternative action.

To adjust either of these options:

Enter your PIN

Press



Press .


� �



genesis

Press . should be displayed.

Press to select either the required holiday or to find a blank holiday.

Press . Enter DDMMYY should be displayed.

Enter the date in the format of DDMMYY where DD are the days, MM are the months and

YY are the years. For example, 21st August 2010 would be 210810.

Press . Enter Name should be displayed.

Enter the description of the holiday.

Press .

Confirm Update will be displayed.

Press . The holiday is now set.

Enter HHMM should be displayed.

Enter the time in the format of HHMM where HH are the hours in 24 hour format, and MM

are the minutes. For example, 10:32 am would be 1032. 10:32 pm would be 2232.

Press . Enter DDMMYY should be displayed.

Enter the date in the format of DDMMYY where DD are the days, MM are the months and

YY are the years. For example, 21st August 2010 would be 210810.

Press . Set MU Clock will be displayed.

Press . The date will now be set.


genesis


Glossary Access The area is disarmed, or the door is released. Area An area is a group of inputs, typically defined by their location or function. Armed See Secure. Alarm Typically an input in an armed area has detected a possible intrusion. An alarm is something that may

require an immediate response. Card A credential used to identify the holder. This could be a proximity card, magnetic swipe, or even a finger

print or other biometric method. Disarmed The area will not monitor its inputs. No alarm will be triggered if they are active. Typically an occupied

area will be disarmed. Duress Someone has been forced to enter their PIN. The duress code is one more than the normal PIN. Isolate Stops the input from triggering an alarm. An input should only be isolated if it is faulty (and a technician

has been notified) or work is being conducted on it. PIN Personal Identification Number. The number entered into the panel to identify the user. PIR Passive InfraRed. A motion detector that relies upon changes in heat around the room to detect

movement. Reed switch Two devices used for monitoring doors and windows. When separated the switch will open to indicate

that the door or window is open. Secure The area will monitor all of its inputs. If any are active, an alarm will be triggered. Typically an

unoccupied area will be secured. Sealed The area is armed and has no alarms. Tamper The system has detected that a case has been opened or the cabling has been modified. A technician

should check the system as soon as possible. A tamper indicates that the system may have been compromised and does not offer full protection any more.

Genesis Version 2 Users Manuals3-ap-southeast-2.amazonaws.com/resources.farm1.mycms.me...genesis...

Documents

Transcript of Genesis Version 2 Users Manuals3-ap-southeast-2.amazonaws.com/resources.farm1.mycms.me...genesis...