P R O P O S T A C U R R I C U L A R - Portal Prefeitura de ...
General Purpose P Laundry Tray Pump A R Y R D N U L E S O ... · P U R P O S E L A U N D R Y T R A...
2
Model 3201-96 ® A Gorman-Rupp Company 400 Spring Street • Royersford, PA 19468 USA www.amtpump.com • 888-amt-pump (268-7867) For use with nonflammable liquids compatible with pump component materials. Viton ® and Teflon ® are registered trademarks of E. I. Dupont. STE-3 GENERAL PURPOSE LAUNDRY TRAY PUMP The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a “laundry tray” pump, but can be used for most gravity fed general service pumping applications. The 1/8" diameter solids handling open impeller design makes it particularly adaptable to dirty, as well as clean liquids and is inherently resistant to clogging. The pump is constructed of cast aluminum and features 1-1/4" NPT suction and discharge ports. Pump is powered by a 1725 RPM, 115 VAC, 1/4 HP motor. Pumps are not self- priming and require flooded suction. General Purpose Laundry Tray Pump • Cast Aluminum Construction • Buna-N Mechanical Seal and O-ring • 1-1/4˝ NPT Suction and Discharge Port • Maximum Working Pressure 50 PSI • Maximum Temperature 180° F • Maximum Flow 24 GPM • Maximum Head 11 Ft. (5.2 PSI) • Self-Cleaning, Semi-Open Impeller • 1/4 HP, 115 VAC Single Phase Open Drip Proof (ODP) 1725 RPM 48Z Frame Motor • Continuous Duty Motor 7 6 5 4 3 2 1 0 0 2 4 6 8 0 1 2 1 4 1 2 3 8 2 4 2 0 2 6 1 2 1 8 4 0 ) z H 0 6 ( M P R 5 2 7 1 @ y t i c a p a C 0 . 1 y t i v a r g c i f i c e p s r e t a W - d i u q i L 1 3 . 2 y b e d i v i d , i s p o t t r e v n o C ) * ( ] W k 9 1 . 0 [ P H 4 / 1 6 9 - 1 0 2 3 " ¼ 1 0 1 2 3 4 ] * . t f [ ] m [ ] m p g . S . U [ Total Head m [ 3 ] h / Performance of Laundry Tray Pump
Transcript of General Purpose P Laundry Tray Pump A R Y R D N U L E S O ... · P U R P O S E L A U N D R Y T R A...
Model 3201-96
®
A Gorman-Rupp Company
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)For use with nonflammable liquids compatible with pump component materials. Viton® and Teflon® are registered trademarks of E. I. Dupont. STE-3
GEN
ERA
L PU
RPO
SE L
AU
ND
RY T
RAY
PUM
P
The AMT Laundry Tray pump is a singlestage, multi-vane open impeller unit. It isdesigned as a “laundry tray” pump, but canbe used for most gravity fed general servicepumping applications. The 1/8" diametersolids handling open impeller designmakes it particularly adaptable to dirty, aswell as clean liquids and is inherentlyresistant to clogging. The pump isconstructed of cast aluminum and features1-1/4" NPT suction and discharge ports.Pump is powered by a 1725 RPM, 115 VAC,1/4 HP motor. Pumps are not self-priming and require flooded suction.
General PurposeLaundry Tray Pump• Cast Aluminum Construction
• Buna-N Mechanical Seal and O-ring
• 1-1/4˝ NPT Suction and Discharge Port
• Maximum Working Pressure 50 PSI
• Maximum Temperature 180° F
• Maximum Flow 24 GPM
• Maximum Head 11 Ft. (5.2 PSI)
• Self-Cleaning, Semi-Open Impeller
• 1/4 HP, 115 VAC Single PhaseOpen Drip Proof (ODP) 1725 RPM48Z Frame Motor
• Continuous Duty Motor
76543210
0
2
4
6
8
01
21
41
238242026121840
)zH 06( MPR 5271 @ yticapaC0.1 ytivarg cificeps retaW- diuqiL 13.2 yb edivid ,isp ot trevnoC)*(
]Wk 91.0[ PH 4/1 69-1023 "¼1
0
1
2
3
4
]*.tf[ ]m[
]mpg .S.U[
To
tal H
ead
m[ 3 ]h/
Performance of Laundry Tray Pump
®
A Gorman-Rupp Company
Manufacturer of AMT & IPT Pumps400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.
©2012 American Machine and Tool Company. All rights reserved.
STE-4
®
A Gorman-Rupp CompanyGeneral Purpose Laundry Tray Pump
0613
Standard Features• Cast Aluminum Construction
• Buna-N Mechanical Seal and O-ring
• 1-1/4" NPT Suction and Discharge Ports
• Maximum Working Pressure 50 PSI
• Maximum Temperature 180° F
• Maximum Flow 24 GPM
• Maximum Head 11 Ft.
• Self-cleaning, Semi-open Impeller
• 1725 RPM 1/4 HP 115 VAC Single Phase,Open Drip Proof (ODP) 48Z Frame Motor
• QSP – Quick Ship Pumps
Pump Dimensional & Specification Data
Model HP PH ENC Voltage @ 60 Hz
Full Load Amps SUC* DIS* L** W H
Ship Wt. (Lbs.)
3201-96 1/4 1 ODP 115 4.5 1¼ 1¼ 9.2 [23.3] 5.6 [14.2] 6.4 [16.2] 13
(*) Standard NPT (Female) pipe thread. (**) This dimension may vary due to motor manufacturer’s specifications. NOTE: Dimensions are in inches [centimeters] and have a tolerance of ±1/4". NOTE: Electric supply for ALL motors must be within ±10% of nameplate voltage rating (e.g. 230V ± 10% = 207 to 253).
Maximum Solids Handling Capacity: 1/8” Diameter
![u } ] } v o } } } ( ] P Z r Á ] v P } o ] ] o } µ o ] u D ... · u } ] } v o } } } ( ] P Z r Á ] v P } o ] ] o } µ o ] u ... u } ] } v o } } } ( ] P Z r Á ] v P } o ] ] o } µ](https://static.fdocuments.us/doc/165x107/5e0ee75edea8723fe9108e76/u-v-o-p-z-r-v-p-o-o-o-u-d-u-v-o-.jpg)
