General Purpose Functions Utility Functions Account Security Functions.
-
Upload
monica-scott -
Category
Documents
-
view
219 -
download
2
Transcript of General Purpose Functions Utility Functions Account Security Functions.
General Purpose Functions
Utility Functions
Account Security Functions
Utility Functions – IP Address Conversion
• unsigned long NAInet_addr( char *addrp );– “dot” notation C string to unsigned long
• void NAInet_toa( unsigned long ipaddr,char *dest );
– Unsigned long to “dot” notation C string– Destination must be >= 16 characters
Utility Functions – System Tick
• void NATotalTicks( unsigned long *hidest, unsigned long *lodest);
– Returns total ticks from system start– *hidest, *lodest: pointers to target fields for high-
and low-order portions of system clock.
• unsigned long NADeltaTicks (unsigned long hiord, unsigned long loord);
– Returns difference in ticks from supplied value to “now”
– hiord, loord: high- and low-order portions of supplied value
Account Security Functions - get
• unsigned int NAgetSysAccess (char *user, char *password, unsigned int *ipAddr);– For account name user, returns the account
password in password– ipAddr points to an optional IP address filter– Returns account privilege, a combination of one or
more from the following slide
Access Level Bit Settings
• NASYSACC_LEVEL_R (read only)• NASYSACC_LEVEL_RW (read/write)• NASYSACC_LEVEL_HTTP_Rx (can access Web
pages in the indicated security realm)• NASYSACC_LEVEL_GATEWAY (can be used for
secure gateway)• NASYSACC_LEVEL_SNMP_R (defines SNMP public
community string)• NASYSACC_LEVEL_SNMP_RW (defines SNMP
private community string)• NASYSACC_LEVEL_ROOT (full privileges)• 0 – no privileges or NULL password
Account Security Functions – create/remove record
• int NAsetSysAccess (unsigned int op, char *user, char *password, unsigned int
level, char *ipAddr);– op: NASYSACC_ADD or NASYSACC_DEL– user: pointer to account name, default <= 80 bytes– password: pointer to password, default <= 80
bytes– level: same as previous slide– ipAddr: pointer to IP address as a C string in “dot”
notation; allow account access from this IP address only. May be NULL.
– Return: see next slide
NAsetSysAccess Return Codes
• 0 (Success)• NASYSACC_INVALID_OPERATION • NASYSACC_INVALID_USERNAME• NASYSACC_DUPLICATE_USERNAME • NASYSACC_INVALID_PASSWORD • NASYSACC_INVALID_IPADDRESS• NASYSACC_INVALID_ACCOUNT• NASYSACC_DATABASE_FULL • NASYSACC_NOMEM