General Catalogue 2013-2014 - Hitecsa Cool Air...FPW, wall mounted fan coil Page 86 BSW, fan coil...
Transcript of General Catalogue 2013-2014 - Hitecsa Cool Air...FPW, wall mounted fan coil Page 86 BSW, fan coil...
Tarifa de precios _ junio 2013
España y Portugal
General Catalogue 2013-2014
The guaranteeof the leader,
the qualityof the specialist
2
A
B
C
AIR/AIR Inverter, compact and split units. Page 8
AIR/AIR ON/OFF compact and split units Page 14
CLVA-CLVBA ductable indoor units Page 26
Ductable axial condenser units Page 29
Heat recovery units Page 34
SELF-CONTAINED AIR-TO-AIR UNITS
Roof Top standard version axial fans Page 38
Roof Top standard version axial fans RCF cooling recovery Page 40
Roof Top standard version centrifugal fans Page 42
Roof Top standard version RCF centrifugal fans cooling recovery Page 44
Roof Top standard version MINI centrifugal fans Page 46
ROOF TOP AIR TO AIR
WATER/AIR compact horizontal COAXIAL exchanger Page 50
WATER/AIR compact horizontal PLATES exchanger Page 52
AIR/AIR compact vertical COAXIAL exchanger Page 54
WATER/WATER compact vertical PLATES exchanger Page 56
SELF-CONTAINED WATER TO AIR UNITS
TABLE OF CONTENTS
3
D
E
F
MINI ADVANCE i, AIR/WATER units axial fans Page 62
MINI KRONO X, AIR/WATER units axial fans Page 63
KRONO X, AIR/WATER units axial fans medium power Page 65
ADVANCE X, AIR/WATER units axial fans high power, scroll Page 68
ADVANCE XT, AIR/WATER units axial fans high power, screw Page 70
KRONO C, AIR/WATER units centrifugal fans medium power Page 72
ADVANCE W, WATER/WATER units scroll compressors Page 74
ADVANCE WT, WATER/WATER screw compressors Page 77
WATER CHILLER UNITS
FCW/FCCW, 2T and 4T vertical and horizontal fan coil with and without housing Page 80
FKW and FKWS, 4-way 2T and 4T cassette fan coil Page 84
FPW, wall mounted fan coil Page 86
BSW, fan coil installation high pressure ducts available Page 87
BHW, ductable fan-coil Page 90
EHW, horizontal air conditioning units Page 92
CLW, indoor units for connection to vertical ducts Page 94
EHWM, air handling units Page 96
FAN COILS AND AIR HANDLING UNITS
REGULATION AND CONTROL Page 97
4
02.
01.Reason for beingHitecsa, leader in the European market in the design, manufacturing and prescription of air conditioning equipment, is an international benchmark in terms of flexibility and productive punctuality.
Our reason of being is to support our customers throughout the entire life-cycle of their equipment. We strive to understand our customers' needs for air-conditioning comfort and well-being and to provide them with
advice on the selection of the right equipment, as well as offering the best possible level of after-sales service. Our team of specialists and engineers offers you a personalised technical consulting service, helps you choose the best air-conditioning solution for your needs, and offers you assistance during the entire life-cyle of the unit.
Our large head offices in Vilanova i la Geltrú, Barcelona, cover over 10,000 m2, allowing us to offer a top-quality service in logistics, R&D, manufacturing, and assembly. At these facilities, our equipment is subjected to functional tests to ensure the quality of all products.
Our R&D Department guarantees the develop-ment of efficient and environmentally friendly products. In addition to the internal quality control procedures, HITECSA products are subjected to EUROVENT certification procedures, a leading European certification body in the European air-conditioning market.
Since1982We have been leaders in the market since 1982. Since then, all of our departments have evolved in line with the changes required by the new needs of our customers and the changes brought about by standards regarding environmental and energy efficiency.
1982HITECSA was foundedin Vilanova i la Geltrú (Barcelona)
1995The H2 plant was opened, where the head offices and assembly plant are currently located.
2003Updating of the production unit to speed up the response times to the needs of our customers.
2007Start up of the HITECSA Schooltraining courses.
2012The new property promotes the development of new products from the optimisation of the R&D department.
TodayOver 100 workers on the staff. 10,000 m2 of facilities devoted to the design and manufacture of equipment.
Plans for the futureContinuous innovation of our product range in terms of energy efficiency, respect for the environment and cost optimisation in order to adapt it to the needs of our customers.Continuous improvement of our customer services.Geographic expansion and increase of our network of collaborators
Our reason for being isto support our customers throughout the entire life-cycle of their equipment
5
04.
03.Team
José María, Ricardo, Josep Manel, Sonia, Josep, Constanza... just some of over 100 specialists. People are our best capital. We are not machines. We are a team of people at the service of our customers.
Behind a telephone number or e-mail address, you will always find a name – a person who can help you to find an answer to any technical, administrative or commercial doubt or query.
The training and experience of our team guarantees the quality of all of our equipment and services.
DedicationTo the customerWe adapt to our customers' needs, both in terms of delivery times and with regard to the specific characteristics of their projects, offering the best pre- and after-sales advice and the highest possible quality.
Our production system, structured into separate cells, allows us to offer a totally flexible assembly chain so that we can manufacture products which are 100% tailor-made – in the time required by our customers, with the quality they expect, and serviced and installed where they need them.
FlexibilitySpeedSupportQuality
A teamof specialists
at your service
6
06.
05.
Solutionspost-installationWe support you throughout the life-cycle of your air-conditioning unit, both with training at our Hitecsa School and with spare parts, thanks to our new SERV-HIPLUS division. Our post-sales department is in charge of coordinating and providing technical assistance and our website allows you to quickly find all up-to-date technical information on our products.
Our technical departments are responsible for finding out about our customers' air-conditioning needs and offering an engineering and design service which allows customers to find the best possible unit for their project from our range of equipment.
HITECSA also designs tailor-made solutions which meet customers' expectations regarding technical features, energy efficiency, costs and delivery times – all in line with the required time period and geographic location.
Solutionspre-installation
We design solutions,we shape your comfort
Spare partsWith the aim of improving the quality of our service, we have implemented a series of improvements in our spare parts department, strengthening the team devoted to this area and updating the prices of the components. The management of requests is carried out by our team of technicians, who personally contact our customers to track progress and make sure that requests are answered as soon as possible.
HITECSA Training SchoolAt our facilities in Vilanova i la Geltrú (Barcelona), training courses are given for all professionals in the sector who wish to increase their knowledge of air conditioning systems and the operation of HITECSA products.We also offer our collaborators and customers the option of participating in tailor-made courses at their own premises.
POST-SALESWe have a network of official service technicians in all major cities who, in conjunction with approved service technicians, provide fast and reliable service coverage for the whole country. Our head office has a special after-sales service telephone team. The in-house post-sales team can make on-site visits in order to provide support for commissioning or to check that equipment is working correctly.
AAIR/AIR Inverter, compact and split units Page 8
AIR/AIR ON/OFF compact and split units Page 14
CLVA-CLVBA ductable indoor units Page 26
Ductable axial condenser units Page 29
Heat recovery units Page 34
SELF-CONTAINED AIR-TO-AIR UNITS
8
A01
ACHIA/ACHIBA
ECHIA/CCHIA – ECHIBA/CCHIBA
601, 741 901
ECHIA/ECHIBA CCHIA/CCHIBA 601, 741 CCHIA/CCHIBA 901
ECHIA/CCHIA – ECHIBA/CCHIBAACHIA/ACHIBA
COMPACT/SPLIT HORIZONTAL INVERTER
ACHIACooling only
ECHIA/CCHIACooling only
ACHIBAHeat pump
ECHIBA/CCHIBAHeat pump
COMPACT configuration SPLIT configuration
• Variable airflow for the outdoor fan
• Three air speeds in the Indoor Fan
• Cooling capacities ranging from 4 to 29 kW
This range of units are self-contained horizontal units suitable for connection to both indoor and outdoor sections of a network of air distribution ducts.
Designed to be installed inside the building to be air-conditioned, they are characterised by offering great flexibility in the installation.
• EER/COP coefficient ranging from 3.2 in nominal temperature conditions
• Scroll compressors with soft-start
• R410A refrigerant
• Can be combined with the RCAH range of heat recovery units of high energy efficiency and filters up to F Class.
• DC inverter technology: maximum savings and comfort
• Low sound level
• High performance in heat pump for low outdoor temperatures as low as -15°C
SELF-CONTAINED AIR-TO-AIR UNITS
Inverter High Energy Efficiency at the service of energy rehabilitation in the commercial sector
MAIN FEATURES
• Operating limit in cooling mode with outdoor temperature of 48°C
• Soft-start of the indoor and/or outdoor fan
• Oil separator (only for split units)
• ON/OFF remote
• Remote cooling/heating
• Scheduling function and Modbus connection
• Controls supplied as standard TH Tune
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
9
A01
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 17.3 22.4 28.9
Maximum cooling capacity (120 Hz) R.T. 4.9 6.4 8.2
Maximum heating capacity (120 Hz) kW 18.6 24.2 28.9
Nominal cooling capacity (80 Hz) kW 12.9 16.6 20.6
Nominal cooling capacity (80 Hz) R.T. 3.7 4.7 5.9
Nominal heating capacity (80 Hz) kW 13.0 15.7 20.4
Maximum EER coefficient kW/kW 3.16 2.95 2.90
Maximum COP coefficient kW/kW 3.21 3.03 2.93
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N
Nominal indoor airflow in cooling m3/h 2300 3000 3700
Nominal indoor airflow in heating m3/h 2800 3600 4400
Max. int. airflow – static pressure m3/h – Pa 3600 – 70 4600 – 80 5600 – 90
Max out. airflow – static pressure m3/h – Pa 5600 – 50 6200 – 50 7,500 – 50
Dimensions (length x width x height) mm 1755x1697x640 1755x1697x640 1998x1755x672
Net weight Kg 375 420 495
ACHIA-ACHIBA TECHNICAL SPECIFICATIONS
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 17.3 22.4 26.5
Maximum cooling capacity (120 Hz) R.T. 4.9 6.4 7.5
Maximum cooling capacity (120 Hz) kW 18.6 24.2 28.9
Nominal cooling capacity (80 Hz) kW 12.9 16.6 20.6
Nominal cooling capacity (80 Hz) R.T. 3.7 4.7 5.9
Nominal cooling capacity (80 Hz) kW 13.0 15.7 20.4
Maximum EER coefficient kW/kW 3.16 2.95 2.90
Maximum COP coefficient kW/kW 3.21 3.03 2.93
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 1/2 5/8 5/8
Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8
Max out. airflow – static pressure m3/h – Pa 5600 – 50 6200 – 50 7500 – 50
Dimensions (length x width x height) mm 1755x1004x640 1755x1004x640 1750x1057x662
Net weight Kg 240 295 312
OUTDOOR UNIT (CCHIA/CCHIBA) TECHNICAL SPECIFICATIONS
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 17.3 22.4 28.9
Maximum cooling capacity (120 Hz) R.T. 4.9 6.4 8.2
Maximum cooling capacity (120 Hz) kW 18.6 24.2 28.9
Nominal cooling capacity (80 Hz) kW 12.9 16.6 20.6
Nominal cooling capacity (80 Hz) R.T. 170.9 210.7 256.2
Nominal cooling capacity (80 Hz) kW 13.0 15.7 20.4
Maximum EER coefficient kW/kW 3.16 2.95 2.90
Maximum COP coefficient kW/kW 3.21 3.03 2.93
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 1/2 5/8 5/8
Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8
Nominal indoor airflow in cooling m3/h 2300 3000 3700
Nominal indoor airflow in heating m3/h 2800 3600 4400
Max. int. airflow – static pressure m3/h – Pa 3600 – 70 4600 – 80 5500 – 90
Dimensions (length x width x height) mm 1755x752x640 1755x752x640 1750x900x662
Net weight Kg 145 150 180
INDOOR UNIT (ECHIA/ECHIBA) TECHNICAL SPECIFICATIONS
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
10
A01
ENERGY SAVING
Option of mixing module for semi-enthalpy free cooling with two dampers
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Option of manufacturing units with symmetric configuration
Outdoor installation kit
Upgraded motors
Anti-freeze heater for collection tray
Fireproof filter class M0
Hot water heating coils
Electrical heating as backup in defrosting
Anti-corrosion pre-treated coils
Prepared for disassembly
Quick-connect valves with preload of refrigerant gas (only for SPLIT configuration)
MAINTENANCE
Service valves
External Schrader valves for pressure
test (standard for the 901 model)
Clogged filter indication
Condenser filter
Split filter
REGULATION AND CONTROL
Alarm indication
Smoke detection
Separate electrical panel
Ambient temperature or wall mounted sensor
Discharge temperature sensor
Centralised integrated management
operation
Operation without neutral
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
11
ACVIA/ACVIBA ECVIA/ECVIBA – CCVIA/CCVIBA
ECVIA/ECVIBA 601.741.901 CCVIA/CCVIBA 601.741.901
A01
ACVIA/ACVIBA ECVIA/CCVIA – ECVIBA/CCVIBA
• Cooling capacities up to 30 kW
• EER/COP coefficient ranging
from 2.9 in nominal temperature conditions
• Scroll Compressors with soft-start
• R410a refrigerant
• DC inverter technology: maximum savings and comfort
• Low sound level
• High performance in heat pump for low outdoor temperatures as low as -15°C
MAIN FEATURESThis range of units are self-contained vertical units suitable for connection to both indoor and outdoor sections of a network of air distribution ducts. Designed to be installed inside the building to be air-conditioned, they are characterised by offering great flexibility in the installation.
• Operating limit in cooling mode with outdoor temperature of 48°C
• Soft-start of the indoor and/or
outdoor fan
• Oil separator (only in split units)
• ON/OFF remote
• Remote cooling/heating
• Scheduling function and Modbus connection
• Controls supplied as standard TH Tune
COMPACT/SPLIT VERTICAL INVERTER
ACVIACooling only
ECVIA/CCVIA Cooling only
ACVIBAHeat pump
ECVIBA/CCVIBA Heat pump
COMPACT configuration SPLIT configuration
SELF-CONTAINED AIR-TO-AIR UNITS
Inverter High Energy Efficiency at the service of energy rehabilitation in the commercial sector
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
12
A01
ACVIA-ACVIBA TECHNICAL SPECIFICATIONS
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 18.5 23.9 28.3Maximum cooling capacity (120 Hz) R.T. 5.3 6.8 8.1Maximum heating capacity (120 Hz) kW 20.0 26.1 30.6Nominal cooling capacity (80 Hz) kW 13.8 17.7 22.0Nominal cooling capacity (80 Hz) R.T. 3.9 5.0 6.3Nominal heating capacity (80 Hz) kW 14.0 18.0 22.5Maximum EER coefficient kW/kW 2.90 2.86 2.96Maximum COP coefficient kW/kW 2.95 2.94 2.99Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+NIndoor airflows m3/h 2700/3200/4000 3200/3800/4800 3900/4650/5900Max. int. airflow – static pressure m3/h – Pa 4000 – 70 4800 – 75 5900 – 90Max out. airflow – static pressure m3/h – Pa 6800 – 50 7300 – 50 10,000 – 50Dimensions (length x width x height) mm 1130x800x1900 1130x800x1900 1700x870x1900Net weight Kg 400 470 600
OUTDOOR UNIT (CCVIA/CCVIBA) TECHNICAL SPECIFICATIONS
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 18.5 23.9 28.3Maximum cooling capacity (120 Hz) R.T. 5.3 6.8 8.1Maximum heating capacity (120 Hz) kW 20.0 26.1 30.6Nominal cooling capacity (80 Hz) kW 13.8 17.7 22.0Nominal cooling capacity (80 Hz) R.T. 3.9 5.0 6.3Nominal heating capacity (80 Hz) kW 14.0 18.0 22.5Maximum EER coefficient kW/kW 2.90 2.86 2.96Maximum COP coefficient kW/kW 2.95 2.94 2.99Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+NCooling connect. Liquid line Ø (") 1/2 5/8 5/8Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8Max out. airflow – static pressure m3/h – Pa 6800 – 50 7300 – 50 10,000 – 50Dimensions (length x width x height) mm 1130x800x1250 1130x800x1250 1700x870x1250Net weight Kg 260 320 390
INDOOR UNIT (ECVIA/ECVIBA) TECHNICAL SPECIFICATIONS
MODEL 601 741 901
Maximum cooling capacity (120 Hz) kW 18.5 23.9 28.3Maximum cooling capacity (120 Hz) R.T. 5.3 6.8 8.1Maximum heating capacity (120 Hz) kW 20.0 26.1 30.6Nominal cooling capacity (80 Hz) kW 13.8 17.7 22.0Nominal cooling capacity (80 Hz) R.T. 3.9 5.0 6.3Nominal heating capacity (80 Hz) kW 14.0 18.0 22.5Maximum EER coefficient kW/kW 2.90 2.86 2.96Maximum COP coefficient kW/kW 2.95 2.94 2.99Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+NCooling connect. Liquid line Ø (") 1/2 5/8 5/8Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8Indoor airflows m3/h 2700/3200/4000 3200/3800/4800 3900/4650/5900Max. int. airflow – static pressure m3/h – Pa 4000 – 70 4800 – 75 5900 – 90Dimensions (length x width x height) mm 1130x800x650 1130x800x650 1700x870x650Net weight Kg 140 150 210
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
13
A01
12,500
10,500
8,500
6,500
4,500
0 3 6 9 12 15 18 21 24 27 30 33 3619
PAYBACK STUDY
Comparative study and calculation of the payback period for replacing the existing unit with a fixed speed unit or an inverter unit in the banking sector. This corresponds to a standard office in the Madrid climatic area. Estimated calculation based on the entry of data provided by the customer.
HITECSA offers you its Technical Departmentto make estimated calculations for replacing your units.
Inve
rter
vs
On-
Off
Cos
ts (€
)
Payback times – months
PRODUCTRECOMMENDED
FOR ENERGY REHABILITATION
ENERGY SAVINGOption of mixing module for free cooling with three dampers
AIR QUALITYGravimetric filter in return G4 Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVELDouble thermo-acoustic insulationCompressor sound jacket
UNIT INSTALLATIONOption of manufacturing units with symmetric configurationOutdoor installation kitUpgraded motors
Anti-freeze heater for condenser in trayFireproof filter class M0 Hot water heating coils Electrical heating as backup in defrostingAnti-corrosion pre-treated coilsPrepared for disassembly Only for SPLIT configuration:
Quick-connect valves with preload of refrigerant gas
MAINTENANCE
Service valvesClogged filter indicationCondenser filterSplit filter
REGULATION AND CONTROLAlarm indicationSmoke detectionSeparate electrical panelAmbient temperature or wall mounted sensorDischarge temperature sensorCentralised integrated management operation
Operation without neutral
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
ON-OFFINVERTER
14
ECHA/CCHA – ECHBA/CCHBA
A02
ACHA/ACHBA
ACHA/ACHBA
ECHA/CCHA – ECHBA/CCHBA
201, 501 701, 721, 751, 801 1001, 1201
ECHA/ECHBA 251, 1201 CCHA/CCHBA 701, 721, 751, 801 CCHA/CCHBA 1001, 1201CCHA/CCHBA 201, 251, 351, 371, 501
COMPACT/SPLIT HORIZONTAL ON-OFF
ACHACooling only
ECHA/CCHACooling only
ACHBAHeat pump
ECHBA/CCHBAHeat pump
COMPACT configuration SPLIT configuration
SELF-CONTAINED AIR-TO-AIR UNITS
• Cooling capacities ranging from 5.6 to 33.5 kW
• Scroll Compressors
• R410a refrigerant
• Can be combined with the RCAH range of heat recovery units of high energy efficiency and filters up to F Class.
MAIN FEATURESThis range of units are self-contained horizontal units suitable for connection to both indoor and outdoor sections of a network of air distribution ducts.
Designed to be installed inside the building to be air-conditioned, they are characterised by offering great flexibility in the installation.
• Thermostats and controls supplied as standard for units with electromagnetic regulation
RTR 7035 model 201T-8376B models 251-501 SUPER SI models 701-1201
Maximum flexibility for air conditioning through ducts of commercial premises
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
15
A02
MODEL 201 251 351 371 401 501
Nominal cooling capacity kW 5.6 7.4 9.7 11.6 12.4 14.1
Nominal cooling capacity R.T. 1.6 2.1 2.8 3.3 3.5 4.0
Nominal heating capacity kW 6.1 8.2 9.8 12 13.8 16.4
Total power input – cooling kW 2.8 3.3 4.3 4.9 5.1 6.5
Total power input – heating kW 2.6 3.1 3.8 4.4 4.6 5.9
Power supply (50 Hz ~) V 230.1 230.1-400.3+N 230.1-400.3+N 400.3+N 400.3+N 400.3+N
Airflow – in. static pressure m3/h – Pa 1500 – 37 1600 – 47 2000 – 37 2700 – 32 2700 – 32 3200 – 48
Airflow – out. static pressure m3/h – Pa 2100 – 50 2450 – 50 3180 – 50 3800 – 50 3800 – 50 4150 – 50
Dimensions (length x width x height) mm 1175x1109x452 1325x1259x504 1445x1339x504 1505x1389x562 1505x1389x562 1505x1389x562
Net weight Kg 159 197 219 253 253 260
MODEL 701 721 751 801 1001 1201
Nominal cooling capacity kW 17.2 18.5 20.8 21.9 28.4 33.5
Nominal cooling capacity R.T. 4.9 5.3 5.9 6.2 8.1 9.5
Nominal heating capacity kW 18.9 20.4 21.9 24.6 29.8 37.2
Total power input – cooling kW 7.8 8.5 9.5 9.7 12.4 15.7
Total power input – heating kW 6.9 7.9 8.1 8.8 11.8 15.1
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – in. static pressure m3/h – Pa 4300 – 50 4300 – 50 4300 – 50 4300 – 50 5900 – 50 7550 – 82
Airflow – out. static pressure m3/h – Pa 5600 – 50 5600 – 50 5700 – 50 6200 – 50 7600 – 50 9900 – 90
Dimensions (length x width x height) mm 1755x1697x640 1755x1697x640 1755x1697x640 1755x1697x640 1998x1755x672 2400x2201x782
Net weight Kg 354 354 395 404 476 633
ACHA/ACHBA TECHNICAL SPECIFICATIONS
MODEL 701 721 751 801 1001 1201
Nominal cooling capacity kW 17.2 18.5 20.8 21.9 28.4 33.5
Nominal cooling capacity R.T. 4.9 5.3 5.9 6.2 8.1 9.5
Nominal heating capacity kW 18.9 20.4 21.9 24.6 29.8 37.2
Total power input – cooling kW 6.7 7.4 8.3 8.5 11.1 13.6
Total power input – heating kW 5.7 6.7 7 7.4 10.2 12.2
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 1/2" 1/2" 5/8" 5/8" 5/8" 5/8"
Cooling connect. Gas line Ø (") 7/8" 7/8" 7/8" 7/8" 1 1/8" 1 1/8"
Airflow – out. static pressure m3/h – Pa 5600 – 50 5600 – 50 5700 – 50 6200 – 50 7600 – 50 9900 – 90
Dimensions (length x width x height) mm 1755x1004x640 1755x1004x640 1755x1004x640 1755x1004x640 1750x1057x662 2300x1382x782
Net weight Kg 223 223 263 272 292 410
MODEL 201 251 351 371 401 501
Nominal cooling capacity kW 5.6 7.4 9.7 11.6 12.4 14.1
Nominal cooling capacity R.T. 1.6 2.1 2.8 3.3 3.5 4.0
Nominal heating capacity kW 6.1 8.2 9.8 12 13.8 16.4
Total power input – cooling kW 2.5 3.0 3.9 4.3 4.5 5.6
Total power input – heating kW 2.3 2.9 3.4 3.8 4.0 4.9
Power supply (50 Hz ~) V 230.1 230.1 – 400.3+N 230.1 – 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 3/8" 3/8" 3/8" 1/2" 1/2" 1/2"
Cooling connect. Gas line Ø (") 1/2" 5/8" 3/4" 7/8" 7/8" 7/8"
Airflow – out. static pressure m3/h – Pa 2100 – 50 2450 – 50 3180 – 50 3800 – 50 3800 – 50 4150 – 50
Dimensions (length x width x height) mm 1175x619x452 1325x706x504 1405x825x504 1455x843x562 1455x843x562 1455x843x562
Net weight Kg 106 133 146 172 172 172
OUTDOOR UNIT (CCHA/CCHBA) TECHNICAL SPECIFICATIONS
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
16
A02
MODEL 201 251 351 371 401 501
Nominal cooling capacity kW 5.6 7.4 9.7 11.6 12.4 14.1
Nominal cooling capacity R.T. 1.6 2.1 2.8 3.3 3.5 4.0
Nominal heating capacity kW 6.1 8.2 9.8 12 13.8 16.4
Total power input – cooling kW 0.15 0.23 0.3 0.4 0.4 0.7
Total power input – heating kW 0.15 0.23 0.3 0.4 0.4 0.7
Airflow – static pressure m3/h – Pa 1500 – 37 1600 – 47 2000 – 37 2700 – 32 2700 – 32 3200 – 48
Power supply (50 Hz ~) V 230.1 – 400.3+N 230.1 230.1 230.1 230.1 – 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 1/2" 3/8" 3/8" 1/2" 1/2" 1/2"
Cooling connect. Gas line Ø (") 3/8" 5/8" 3/4" 7/8" 7/8" 7/8"
Dimensions (length x width x height) mm 1175x562x452 1325x600x504 1405x600x504 1455x642x562 1455x642x562 1455x642x562
Net weight Kg 61 72 81 89 89 96
MODEL 701 721 751 801 1001 1201
Nominal cooling capacity kW 17.2 18.5 20.8 21.9 28.4 33.5
Nominal cooling capacity R.T. 4.9 5.3 5.9 6.2 8.1 9.5
Nominal heating capacity kW 18.9 20.4 21.9 24.6 29.8 37.2
Total power input – cooling kW 0.9 0.9 0.9 1.3 1.6 2.7
Total power input – heating kW 0.8 0.9 0.9 1.1 1.3 2.1
Airflow – static pressure m3/h – Pa 4300 – 50 4300 – 50 4300 – 50 4300 – 50 5900 – 50 7550 – 82
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 1/2" 1/2" 5/8" 5/8" 5/8" 5/8"
Cooling connect. Gas line Ø (") 7/8" 7/8" 7/8" 7/8" 1 1/8" 1 1/8"
Dimensions (length x width x height) mm 1775x752x640 1755x752x640 1755x752x640 1755x752x640 1750x900x662 2300x925x782
Net weight Kg 136 136 137 137 172 209
INDOOR UNIT (ECHA/ECHBA) TECHNICAL SPECIFICATIONS
ENERGY SAVINGOption of mixing module for free cooling with two or three dampers Thermal or enthalpy regulation with PCO control card and PGD controlHead pressure control by frequency converter or voltage converterCompressor soft-start (depending on models)Soft-start of the indoor and/or outdoor fan (depending on models)
AIR QUALITYGravimetric filter in return G4 Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVELDouble thermo-acoustic insulationCompressor sound jacket
UNIT INSTALLATIONMagnetothermics in electrical panelPower supply at 60Hzand voltages 230, 208, etc.Option of manufacturing units with symmetric configurationOutdoor installation kitUpgraded motors
Anti-freeze resistanceoperation in collection trayFireproof filter class M0Hot gas bypassHot water heating coils Electric resistance coils for auxiliary electric heatingAnti-corrosion pre-treated coilsR407C refrigerant models available on requestPrepared for disassemblyOnly for SPLIT configuration:
Oil separator Service valves Quick-connect valveswith preload of refrigerant gas
MAINTENANCE
Service valves
External Schrader valves for pressure test
Clogged filter indication
Condenser filter
Split filter
REGULATION AND CONTROLETN thermostat ARIA thermostat SUPER SI thermostat (man. 24 V)
PGD thermostat DSX@ thermostat (man. 24 V)Alarm indicationSmoke detectionON/OFF remoteSeparate electrical panelOption of master-slave operation High pressure switch resetfrom thermostatUnit without thermostatWall mounted ambienttemperature sensorReturn temperature sensorTemperature sensor in ductOperation for redundant machineCentralised integrated management operationOperation without neutralScheduling function and Modbus connection, etc. consult
Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
For sizing of refrigerated lines depending on layout and total installation distance consult our Commercial Department
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
17
A02
CCHA/CCHBA 701, 721CCHA/CCHBA 201, 251, 351, 371, 501
CCHA/CCHBA FTA/FTBA
SELF-CONTAINED AIR-TO-AIR UNITS
CCHA/FTA Cooling only
CCHBA/FTBA Heat pump
Self-contained ductable split systems consisting of a centrifugal condenser unit
• Cooling capacities ranging from 5.2 to 19.3 kW
• Outdoor units with standard blue fin pre-treated coils
• 3-speed indoor fan • Maximum connection distances
between indoor and outdoor units of 50 metres.
MAIN FEATURESThe units in the CCHA/FTA and CCHBA/FTBA series are sets comprising a centrifugal condenser unit and a direct expansion fan coil evaporator unit.
The reduced height of the indoor units make them ideal for fast installation in false ceilings, with the unit either supported or suspended.
DUCTABLE SPLIT
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
Maximum flexibility for air conditioning through ducts of commercial premises
• Thermostats and controls supplied as standard for units with electromagnetic regulation
RTR 7007 (depending on models)T-8376B (depending on models) SUPER SI (depending on models)
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
18
A02 CCHBA/FTBA TECHNICAL SPECIFICATIONS
CCHA/FTA
OUTDOOR MODEL 201 251 351 371
INDOOR MODEL 201 251 351 371
Nominal cooling capacity kW 5.2 7.4 9.6 10.4
Nominal cooling capacity R.T. 1.5 2.1 2.7 3.0
Nominal heating capacity kW 5.8 7.8 10.2 11.0
Total power input – cooling kW 2.7 3.2 4.24 4.68
Total power input – heating kW 2.5 3.1 3.74 4.18
Power supply (50 Hz ~) V 230.1 230.1 or 400.3+N 230.1-230.3 or 400.3+N 230.1-230.3 or 400.3+N
Airflow – static pressure (in.) m3/h – Pa 1100 – 44 1150 – 72 1500 – 80 2200 – 96
Airflow – static pressure (out.) m3/h – Pa 2100 – 50 2450 – 50 3180 – 50 3800 – 50
Liq. pipe diameter Ø (") 3/8 3/8 3/8 1/2
Gas pipe diameter Ø (") 1/2 5/8 3/4 3/4 (in.)- 7/8 (out.)
Ext. dimens. (length x width x height) mm 1175x619x452 1325x706x504 1405x825x504 1455x843x562
Int. dimens. (length x width x height) mm 925x660x280 925x660x280 925x660x280 1250x750x315
Total dist. in./out. units m 50 50 50 50
Vertical dist in./out. units m 25 25 25 25
Net weight – outdoor Kg 106 133 146 172
Net weight – indoor Kg 37 39 44 59
OUTDOOR MODEL 401 501 701 721
INDOOR MODEL 401 501 721 721
Nominal cooling capacity kW 11.8 14.5 18.0 19.3
Nominal cooling capacity R.T. 3.4 4.1 5.1 5.5
Nominal heating capacity kW 12.5 15.3 19.8 20.6
Total power input – cooling kW 4.94 6.13 7.9 8.6
Total power input – heating kW 4.44 5.43 6.9 7.9
Power supply (50 Hz ~) V 230.3 or 400.3 +N 230.3 or 400.3 +N 400.3+N 230.3 or 400.3 +N
Airflow – static pressure (in.) m3/h – Pa 2300 – 80 2500 – 76 3000 – 140 3000 – 140
Airflow – static pressure (out.) m3/h – Pa 3800 – 50 4150 – 50 5600 – 50 5600 – 50
Liq. pipe diameter Ø (") 1/2 1/2 1/2 1/2
Gas pipe diameter Ø (") 3/4 (in.)- 7/8 (out.) 7/8 7/8 7/8
Ext. dimens. (length x width x height) mm 1455x843x562 1455x843x562 1755x1004x640 1755x1004x640
Int. dimens. (length x width x height) mm 1250x750x315 1250x750x315 1250x805x369 1250x805x369
Total dist. in./out. units m 50 50 50 50
Vertical dist. in./out. units m 25 25 25 25
Net weight – outdoor Kg 172 172 223 223
Net weight – indoor Kg 59 61 71 71
Voltage for indoor unit 230.1 50 Hz ~
For sizing of refrigerated lines depending on layout and total installation distance consult our Commercial Department
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
19
A02
ENERGY SAVING
Compressor soft-start(depending on models)
Head pressure control by frequency converter or voltage converter
AIR QUALITY
Gravimetric filter in return G4
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Side intake and discharge(outdoor unit)
Option of manufacturingunits with symmetric configuration (outdoor unit)
Connections on rear side.(outdoor unit)
Indoor unit equipment and accessories painted in RAL 1013 polyester powder coating
Outdoor installation kit
Upgraded motors
Anti-freeze heater for collection tray
Fireproof filter class M0
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
R407C refrigerant models available on request
Prepared for disassembly
Only for SPLIT configuration:
Oil separator
Service valves
Quick-connect valveswith preload of refrigerant gas
Discharge plenum and return
Grille discharge plenum and return
3 and 5 outlet nozzle plenum
Condensate evacuation pump
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Condenser filter
Split filter
REGULATION AND CONTROL
Pressure switches
Electromagnetic regulation
Infrared remote control
ARIA thermostat
PGD thermostat
ETN thermostat
DSX@ thermostat (man. 24 V)
SUPER SI thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Stopping of the evaporatorfan in the defrosting
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus
connection, etc. consultThermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
20
ACVA/ACVBA ECVA/CCVA – ECVBA/CCVBA
A02
ACVA/ACVBA ECVA/CCVA – ECVBA/CCVBA
CCVA-CCVBA 351, 3002 CCVA-CCVBA 3502ECVA-ECVBA 351, 3502
SELF-CONTAINED AIR-TO-AIR UNITS
ACVACooling only
ECVA/CCVACooling only
ACVBAHeat pump
ECVBA/CCVBAHeat pump
COMPACT configuration SPLIT configuration
• Cooling capacities ranging from 9.8 to 114.3 kW
• Scroll Compressors
• R410a refrigerant
• 2 separate refrigerated circuits (models from 1402 to 3502)
• Option of operating as 2x1 multisplit set (models 1402 to 3002)
• Two indoor units connected to an outdoor unit (operation with one or two thermostats)
• One indoor unit connected to two outdoor units (operation with only one thermostat)
MAIN FEATURESThis range of units are self-contained vertical units suitable for connection to both indoor and outdoor sections of a network of air distribution ducts.
Designed to be installed inside the building to be air-conditioned, they are characterised by offering great flexibility in the installation.
• Refrigerated distance between indoor and outdoor unit (Split config.) of up to 50 m in total
• Can be combined with the RCAH range of heat recovery units of high energy efficiency and filters up to F Class.
• Thermostats and controls suppliedas standard for units with electromagnetic regulation
T-8376B- models 351-501 SUPER SI- models 701-3502
COMPACT/SPLIT VERTICAL ON-OFFMaximum flexibility for air conditioning through ducts of commercial premises
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
21
A02ACVA/ACVBA TECHNICAL SPECIFICATIONS
MODEL 351 401 501 701 721 751
Nominal cooling capacity kW 9.8 12.5 14.4 18.9 19.6 22.7
Nominal cooling capacity R.T. 2.8 3.6 4.1 5.4 5.6 6.5
Nominal heating capacity kW 10.4 13.7 15.0 20.0 21.0 23.9
Total power input – cooling kW 4.6 5.6 7.2 8.4 9.3 10.9
Total power input – heating kW 4.2 5.1 6.5 7.9 8.2 10.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – in. static pressure m3/h – Pa 2315-43 2600-50 3540-60 4720-55 4720-55 5133-53
Airflow – out. static pressure m3/h – Pa 4300-50 3950-50 4900-50 6800-50 6800-50 7400-50
Dimensions (length x width x height) mm 937x750x1604 937x750x1604 1087x750x1604 1130x800x1900 1130x800x1900 1130x800x1900
Net weight Kg 251 276 290 367 392 423
MODEL 801 1001 1201 1402 1502 1602
Nominal cooling capacity kW 24.2 30.1 34.9 37.8 43.4 50.2
Nominal cooling capacity R.T. 6.9 8.6 9.9 10.7 12.3 14.3
Nominal heating capacity kW 25.3 31.7 38.2 39.5 44.2 51.9
Total power input – cooling kW 10.9 13.4 14.4 16.2 17.6 20.1
Total power input – heating kW 9.6 12.4 13.2 15.5 16.5 18.0
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – in. static pressure m3/h – Pa 5150-83 6200-73 8000-91 8000-130 10000-145 10000-145
Airflow – out. static pressure m3/h – Pa 7714-57 10000-50 12500-50 13600-88 15600-110 16000-110
Dimensions (length x width x height) mm 1130x800x1900 1700x870x1900 1700x870x1900 2000x939x1997 2000x939x1997 2000x939x1997
Net weight Kg 440 553 558 730 810 820
MODEL 2002 2302 2402
Nominal cooling capacity kW 63.1 73.6 78.5
Nominal cooling capacity R.T. 17.9 20.9 22.3
Nominal heating capacity kW 65.5 81.9 81.9
Total power input – cooling kW 26.0 28.7 34.3
Total power input – heating kW 22.8 27.5 29.0
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N
Airflow – in. static pressure m3/h – Pa 11000-175 12000-160 12000-160
Airflow – out. static pressure m3/h – Pa 22000-123 23000-142 23000-142
Dimensions (length x width x height) mm 2600x980x2174 2600x980x2174 2600x980x2174
Net weight Kg 1080 1115 1135
OUTDOOR UNIT (CCVA/CCVBA) TECHNICAL SPECIFICATIONS
MODEL 351 401 501 701 721 751
Nominal cooling capacity kW 9.8 12.5 14.4 18.9 19.6 22.7
Nominal cooling capacity R.T. 2.8 3.6 4.1 5.4 5.6 6.5
Nominal heating capacity kW 10.4 13.7 15.0 20.0 21.0 23.9
Total power input – cooling kW 4.0 5.1 6.4 7.3 8.0 9.4
Total power input – heating kW 3.7 4.5 5.5 6.8 7.0 9.0
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 3/8 1/2 1/2 1/2 1/2 5/8
Cooling connect. Gas line Ø (") 3/4 3/4 7/8 7/8 7/8 7/8
Airflow – out. static pressure m3/h – Pa 4300-50 3950-50 4900-50 6800-50 6800-50 7400-50
Dimensions (length x width x height) mm 937x750x1022 937x750x1022 1087x750x1022 1130x800x1250 1130x800x1250 1130x800x1250
Net weight Kg 172 189 200 253 272 297
MODEL 801 1001 1201 1402 1502 1602
Nominal cooling capacity kW 24.2 30.1 34.9 37.8 43.4 50.2
Nominal cooling capacity R.T. 6.9 8.6 9.9 10.7 12.3 14.3
Nominal heating capacity kW 25.3 31.7 38.2 39.5 44.2 51.9
Total power input – cooling kW 9.4 12.0 12.5 13.9 15.2 14.4
Total power input – heating kW 8.3 11.0 11.5 14.9 14.6 16.5
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 5/8 1/2 5/8 5/8
Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8 7/8 7/8 1 1/8
Airflow – out. static pressure m3/h – Pa 7714-57 10000-50 12500-50 13600-88 15600-110 16000-110
Dimensions (length x width x height) mm 1130x800x1250 1700x870x1250 1700x870x1250 2000x939x1250 2000x939x1250 2000x939x1250
Net weight Kg 304 373 397 477 538 548
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
22
A02
OUTDOOR UNIT (CCVA/CCVBA) TECHNICAL SPECIFICATIONS
MODEL 2002 2302 2402 3002 3502
Nominal cooling capacity kW 63.1 73.6 78.5 86.6 114.3
Nominal cooling capacity R.T. 17.9 20.9 22.3 24.6 32.5
Nominal heating capacity kW 65.5 81.9 81.9 88.8 119.6
Total power input – cooling kW 21.6 23.4 24.2 31.1 39.8
Total power input – heating kW 21.7 25.7 25.5 27.4 32.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 5/8 5/8 7/8
Cooling connect. Gas line Ø (") 1 1/8 1 1/8 1 1/8 1 3/8 1 5/8
Airflow – out. static pressure m3/h – Pa 22000-123 23000-142 23000-142 27000-140 32000-160
Dimensions (length x width x height) mm 2600x980x1422 2600x980x1422 2600x980x1422 2800x1050x1722 2800x1050x1722
Net weight Kg 747 782 802 978 1058
INDOOR UNIT (ECVA/ECVBA) TECHNICAL SPECIFICATIONS
MODEL 351 401 501 701 721 751
Nominal cooling capacity kW 9.8 12.5 14.4 18.9 19.6 22.7
Nominal cooling capacity R.T. 2.8 3.6 4.1 5.4 5.6 6.5
Nominal heating capacity kW 10.4 13.7 15.0 20.0 21.0 23.9
Total power input – cooling kW 0.3 0.4 0.9 1.0 0.9 1.1
Total power input – heating kW 0.3 0.4 0.8 0.9 0.9 1.0
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 3/8 1/2 1/2 1/2 1/2 5/8
Cooling connect. Gas line Ø (") 3/4 3/4 7/8 7/8 7/8 7/8
Airflow – static pressure m3/h – Pa 2315-43 2600-50 3540-60 4720-55 4720-55 5133-53
Dimensions (length x width x height) mm 937x750x582 937x750x582 1087x750x582 1130x800x650 1130x800x650 1130x800x650
Net weight Kg 92 95 99 126 126 136
MODEL 801 1001 1201 1402 1502 1602
Nominal cooling capacity kW 24.2 30.1 34.9 37.8 43.4 50.2
Nominal cooling capacity R.T. 6.9 8.6 9.9 10.7 12.3 14.3
Nominal heating capacity kW 25.3 31.7 38.2 39.5 44.2 51.9
Total power input – cooling kW 1.0 1.0 1.3 2.2 2.2 2.3
Total power input – heating kW 1.0 0.9 1.2 1.7 1.7 1.9
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 5/8 1/2 5/8 5/8
Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8 7/8 7/8 1 1/8
Airflow – static pressure m3/h – Pa 5125-83 6277-73 8000-91 8000-130 10000-145 10000-145
Dimensions (length x width x height) mm 1130x800x650 1700x870x650 1700x870x650 2000x939x747 2000x939x747 2000x939x747
Net weight Kg 136 197 199 253 272 272
MODEL 2002 2302 2402 3002 3502
Nominal cooling capacity kW 63.1 73.6 78.5 86.6 114.3
Nominal cooling capacity R.T. 17.9 20.9 22.3 24.6 32.5
Nominal heating capacity kW 65.5 81.9 81.9 88.8 119.6
Total power input – cooling kW 3.1 3.3 3.6 3.9 3.9
Total power input – heating kW 2.7 2.4 2.9 2.3 2.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 5/8 5/8 7/8
Cooling connect. Gas line Ø (") 1 1/8 1 1/8 1 1/8 1 3/8 1 5/8
Airflow – static pressure m3/h – Pa 11000-175 12000-160 12000-160 14000-200 18000-250
Dimensions (length x width x height) mm 2600x980x752 2600x980x752 2600x980x752 2800x1050x915 2800x1050x915
Net weight Kg 333 333 333 418 524
For sizing of refrigerated lines depending on layout and total installation distance consult our Commercial Department
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
23
A02
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start(depending on models)
Soft-start ofindoor and/or outdoor fan(depending on models)
Head pressure control by frequency converter or voltage converter
EC radial indoor fan(depending on models)
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulationCompressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Option of manufacturingunits with symmetric configuration
Outdoor installation kit
Upgraded motors
Anti-freeze heater for collection tray
Fireproof filter class M0
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
R407C refrigerant models available on request
Prepared for disassembly
Only for SPLIT configuration:
Oil separator
Service valves
Quick-connect valveswith preload of refrigerant gas
2x1 multisplit operation(1402 to 2402)
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Condenser filter
Split filter
REGULATION AND CONTROL
ETN thermostat (mod. 1 circuit)
ARIA thermostat
SUPER SI thermostat (man. 24 V)
PGD thermostat DSX@ thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult
Thermostat chapter.
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
24
UXCA/UXCBA ECVA/ECVBA
A03/1
SELF-CONTAINED AIR-TO-AIR UNITS
UXCA/ECVA Cooling only
UXCBA/ECVBA Heat pump
• Cooling capacities ranging from 23.6 to 139.7 kW
• Scroll compressors
• 2 separate refrigerated circuits (models from 1602 to 4502)
• Can be combined with the RCAH range of heat recovery units of high energy efficiency and filters up to F Class.
• 3 versions available:Standard (STD)LOW SOUND LEVEL (SIL)Special High Ambient
Temperatures (ATA)
MAIN FEATURESThe units in the UXCA/ECVA – UXCBA/ECVBA series are split units that are especially suitable for installation on rooftops, terraces or in other outdoor areas.
Their design allows large distances in the installation between outdoor and indoor units.
• Refrigerated distance between outdoor and indoor unit up to 50 m in total
• Option of operating as a set multisplit 2x1 (models 1602 to 3002)
• Two indoor units connected to an outdoor unit (operation with one or two thermostats)
• One indoor unit connected to two outdoor units (operation with only one thermostat)
• Thermostats and controls supplied as standard for units with electromagnetic regulationSUPER SI- (man. 24V)
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SELF-CONTAINED SPLIT AXIAL FANMaximum flexibility for air conditioning through ducts of commercial premises
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
25
A03/1
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
OUTDOOR UNIT (UXCA/UXCBA) TECHNICAL SPECIFICATIONS
INDOOR UNIT (ECVA/ECVBA) TECHNICAL SPECIFICATIONS
MODEL 801 1001 1201 1501 1602 2002
Nominal cooling capacity kW 23.6 29.7 34.5 40.3 49.6 65.3
Nominal cooling capacity R.T. 6.7 8.4 9.8 11.5 14.1 18.6
Nominal heating capacity kW 24.9 30.6 39.6 41.6 52.4 67.6
Total power input – cooling kW 10.1 12.0 14.0 15.5 19.5 23.0
Total power input – heating kW 9.9 11.1 14.2 14.7 18.3 21.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Dimensions (length x width x height) mm 1430x1008x325 1430x1008x1325 1400x1320x1500 1400x1320x1500 2035x1030x1325 2035x1030x1325
Net weight Kg 251 316 382 392 495 545
MODEL 801 1001 1201 1501 1602 2002
Nominal cooling capacity kW 23.6 29.7 34.5 40.3 49.6 65.3
Nominal cooling capacity R.T. 6.7 8.4 9.8 11.5 14.1 18.6
Nominal heating capacity kW 24.9 30.6 39.6 41.6 52.4 67.6
Total power input – cooling kW 1.5 1.4 1.9 2.6 2.4 2.6
Total power input – heating kW 1.5 1.3 1.7 2.4 2.3 2.5
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 5/8 5/8 5/8 5/8
Cooling connect. Gas line Ø (") 7/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8
Airflow – static pressure m3/h – Pa 5150-83 6200-73 8000-91 9000-130 10000-145 11000-175
Dimensions (length x width x height) mm 1130x800x650 1700x870x650 1700x870x650 2000x939x747 2000x939x747 2600x980x752
Net weight Kg 136 197 199 272 272 333
MODEL 2402 3002 4002 4502
Nominal cooling capacity kW 73.1 89.4 122.9 139.7
Nominal cooling capacity R.T. 20.8 25.4 34.9 39.7
Nominal heating capacity kW 78.3 86.0 124.8 144.2
Total power input – cooling kW 24.4 29.6 40.7 46.3
Total power input – heating kW 24.7 30.7 38.4 42.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N
Dimensions (length x width x height) mm 2280x1320x1500 2720x1320x1500 2200x2250x1725 2200x2250x1725
Net weight Kg 567 894 950 992
MODEL 2402 3002 4002 4502
Nominal cooling capacity kW 73.1 89.4 122.9 139.7
Nominal cooling capacity R.T. 20.8 25.4 34.9 39.7
Nominal heating capacity kW 78.3 86 124.8 144.2
Total power input – cooling kW 2.6 3.3 5.6 6.2
Total power input – heating kW 2.5 3.6 5.5 5.4
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N
Cooling connect. Liquid line Ø (") 5/8 5/8 7/8 7/8
Cooling connect. Gas line Ø (") 1 1/8 1 3/8 1 5/8 1 5/8
Airflow – out. static pressure m3/h – Pa 12000-160 14000-200 20500-210 22000-200
Dimensions (length x width x height) mm 2600x980x752 2800x1050x915 2900x1200x1115 2900x1200x1115
Net weight Kg 333 418 550 570
For sizing of refrigerated lines depending on layout and total installation distance consult our Commercial Department
26
A03/2
SELF-CONTAINED AIR-TO-AIR UNITS
CLVACooling only
CLVBAHeat pump
INDOOR UNITS FOR CONNECTIONTO VERTICAL DUCTS
The units of the CLVA/CLVBA series are direct expansion evaporator units suitable for connection to a network of air distribution ducts. These units are designed to work together with any Hitecsa outdoor unit of an equivalent cooling capacity. All models have the option to operate on direct discharge by means of an optional air discharge plenum equipped with an anodised aluminium grille for direct discharge.
• Airflows up to 10,200 m3/h
• Countless installation possibilities
• Connectable to any Hitecsa condensing unit
MAIN FEATURES
Maximum flexibility for air conditioning through ducts of commercial premises
CLVA/CLVBA TECHNICAL SPECIFICATIONS
MODEL 251 351 401 501 701 721
Nominal cooling capacity kW 7.4 9.8 12.0 14.4 18.2 22.1
Nominal cooling capacity R.T. 2.1 2.8 3.4 4.1 5.2 6.3
Nominal heating capacity kW 7.4 10.4 12.7 15.5 19.3 23.5
Total power input kW 0.3 0.4 0.6 0.6 0.9 0.9
Power supply (50 Hz ~) V 230.1 230.1 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N
Airflow – static pressure m3/h – Pa 1900-38 2500-68 3000-56 3400-100 4200-115 4400-109
Liquid pipe diameter Ø (") 3/8 3/8 1/2 1/2 1/2 1/2
Gas pipe diameter Ø (") 5/8 3/4 3/4 7/8 7/8 7/8
Dimensions (length x width x height) mm 697x500x1000 697x500x1000 697x500x1000 757x500x1100 1152x600x1200 1152x600x1200
Net weight Kg 45 69 73 94 118 118
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
27
A03/2
CLVA/CLVBA TECHNICAL SPECIFICATIONS
MODEL 751 801 1001 1201 1402 1502 1602
Nominal coolingcapacity kW 22.1 23.2 29.7 35.0 36.4 44.2 45.4
Nominal coolingcapacity R.T. 6.3 6.6 8.4 10.0 10.3 12.6 12.9
Nominal heatingcapacity kW 23.5 24.4 31.7 37.0 38.6 46.6 48.8
Total inputpower kW 1.3 1.3 1.3 1.8 1.8 2.6 2.6
Power supply(50 Hz ~) V 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N 230 or 400.3+N
Airflowstatic pressure m3/h – Pa 4800-120 5200-84 7200-78 8000-85 8400-72 9600-129 10200-123
Liquid pipe diameter Ø (") 5/8 5/8 5/8 5/8 2x1/2 2x5/8 2x5/8
Gas pipe diameter Ø (") 1 1/8 1 1/8 1 1/8 1 1/8 2x7/8 2x7/8 2x1 1/8
Dimensions(length x width x height)
mm 1152x600x1200 1152x600x1200 1700x600x1300 1700x600x1300 1800x675x1400 1800x675x1400 1800x675x1400
Net weight Kg 119 125 175 175 187 187 197
ENERGY SAVINGOption of mixing module for free cooling with two or three dampers Thermal or enthalpy regulation with PCO control card and PGD controlEC radial indoor fan(depending on models)Fan soft-start(depending on models)
AIR QUALITYGravimetric filter in return G4 Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVELDouble thermo-acoustic insulation
UNIT INSTALLATIONFront dischargePower supply at 60Hzand voltages 230, 208, etc.Outdoor installation kitUpgraded motorsFireproof filter class M0Hot gas bypassHot water heating coils (cooling only) Electric resistance coilsfor auxiliary electrical heating Return for insertionConnections opposite sideDischarge plenumIntake grille
Anti-corrosion pre-treated coilsR407C refrigerant models available on requestPrepared for disassembly Base guides
MAINTENANCEService valvesClogged filter indication
Split filter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
For sizing of refrigerated lines depending on layout and total installation distance consult our Commercial Department
28
A03/2
ENERGY SAVING
Discharge fan in radial indoor unit with EC motor (depending on models)
Bionic profile condensation fan operated by EC or AC motor
Option of mixing module for free cooling with two or three dampers Thermal or enthalpy regulation with PCO control card and PGD controlCompressor soft-start (depending on models)Soft-start ofindoor and/or outdoor fan(depending on models)
Head pressure control by frequency converter or voltage converter
AIR QUALITY
Gravimetric filter in return G4 Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Low sound level EC fan
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panelPower supply at 60Hzand voltages 230, 208, etc.Option of manufacturingunits with symmetric configurationOutdoor installation kit(indoor unit)Upgraded motorsAnti-freeze heater for condenser in tray
Guides on the base (indoor unit)
New defrostsystem with pressuresFireproof filter class M0Hot gas bypassDouble speed or double speed by circuit condensation control (depending on models)
Coil protection grille(outdoor unit)
Hot water heating coil Electric resistance coils for auxiliary electric heatingAnti-corrosion pre-treated coilsR407C refrigerant models available on requestPrepared for disassembly
Only for SPLIT configuration:
Oil separator Service valves Quick-connect valveswith preload of refrigerant gas
2x1 multisplitoperation (1602/3002)
MAINTENANCE
Service valvesExternal Schrader valves for pressure testClogged filter indicationSplit filterPressure gauges
REGULATION AND CONTROLARIA thermostat PGD thermostat DSX@ thermostat (man. 24V)Alarm indicationSmoke detectionON/OFF remoteSeparate electrical panelHigh pressure switch resetfrom thermostatIndoor fanstop in defrostUnit without thermostatWall mounted ambienttemperature sensorReturn temperature sensorTemperature sensor in ductOperation for redundant machineCentralised integrated management operation
Operation without neutralScheduling function and Modbus connection, etc. consult
Thermostat chapter.Option of combining an outdoor unit and two indoor units with one indoor unit (only units with two circuits)
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
29
FTZ/FTBZDXCZ/DXCBZ
A03/3
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
AXIAL CONDENSER
DUCTABLE INDOOR UNITS ADVANCE
Maximum flexibility for air conditioning through ducts of commercial premises
DXCZCooling only
FTZCooling only
DXCBZHeat pump
FTBZHeat pump
SPLIT configuration
• Cooling capacities ranging from 4.7 to 19 kW
• Rotary compressors (models 171-351) and Scroll (371-721)
• Outdoor units with standard blue fin pre-treated coils
• 3-speed indoor fan
MAIN FEATURESThe units in the DXCZ/FTZ and DXCBZ/FTZ series are sets comprising an axial condenser unit and a direct expansion fan coil evaporator unit. The reduced height of the indoor units make them ideal for fast installation in false ceilings, with the unit either supported or suspended.
• Maximum connection distances between indoor and outdoor units of 50 metres.
• Quick-connect valves with preload of refrigerant gas for 5 metres
• Standard thermostats and controls with electromagnetic regulation
ETN
OUTDOOR MODEL 171 201 221 251 271 351
INDOOR MODEL 171 201 221 251 271 351
Nominal cooling capacity kW 4.7 5.3 6.3 7.0 7.7 9.8
Nominal cooling capacity R.T. 1.3 1.5 1.8 2.0 2.2 2.8
Total power input kW 1.9 2.1 2.7 3.0 3.0 3.9
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 or 400.3 230.1 or 400.3
Airflow – static pressure m3/h – Pa 700 – 32 1100 – 44 1100 – 44 1150 – 72 1400 – 96 1500 – 80
Liq. pipe diameter Ø (") 3/8 3/8 3/8 3/8 3/8 3/8
Gas pipe diameter Ø (") 1/2 1/2 1/2 5/8 3/4 3/4
Ext. dimens. (length x width x height) mm 870x394x630 870x394x630 870x394x630 870x394x630 920x394x730 920x394x730
Int. dimens. (length x width x height) mm 726x555x218 925x660x280 925x660x280 925x660x280 925x660x280 925x660x280
Total dist. in./out. units m 50 50 50 50 50 50
Vertical in./out. unit dist. (1) m 25 25 25 25 25 25
Net weight – outdoor Kg 50 53 53 54 58 63
Net weight – indoor Kg 31 37 37 39 43 44
DXCZ/FTZ TECHNICAL SPECIFICATIONS
1) For greater distances we recommend installing an oil separatorVoltage for indoor unit 230.1 Sortz
30
A03/3
OUTDOOR MODEL 371 401 451 501 701 721
INDOOR MODEL 371 401 451 501 721 721
Nominal cooling capacity kW 11.0 11.8 13.5 14.8 17.2 19.0
Nominal cooling capacity R.T. 3.1 3.4 3.8 4.2 4.9 5.4
Total power input kW 4.3 4.6 5.4 5.7 7.3 7.8
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3
Airflow – static pressure m3/h – Pa 2200 – 96 2300 – 80 2400 – 94 2500 – 76 3000 – 140 3000 – 140
Liq. pipe diameter Ø (") 1/2 1/2 1/2 1/2 1/2 1/2
Gas pipe diameter Ø (") 3/4 3/4 7/8 7/8 7/8 7/8
Ext. dimens. (length x width x height) mm 950x374x1143 950x374x1143 950x374x1143 950x374x1143 950x374x1143 950x374x1143
Int. dimens. (length x width x height) mm 1250x750x315 1250x750x315 1250x750x315 1250x750x315 1250x805x369 1250x805x369
Total in./out. unit dist. (1) m 50 50 50 50 50 50
Vertical in./out. unit dist. (1) m 25 25 25 25 25 25
Net weight – outdoor Kg 82 82 101 101 115 120
Net weight – indoor Kg 59 59 61 61 71 71
1) For greater distances we recommend installing an oil separatorVoltage for indoor unit 230.1 Sortz
OUTDOOR MODEL 171 201 221 251 271 351
INDOOR MODEL 171 201 221 251 271 351
Nominal cooling capacity kW 4.7 5.3 6.3 7.0 7.7 9.8
Nominal cooling capacity R.T. 1.3 1.5 1.8 2.0 2.2 2.8
Nominal heating capacity kW 4.8 5.8 6.5 7.8 8.3 10.4
Total power input – cooling kW 1.9 2.1 2.7 3.0 3.0 3.9
Total power input – heating kW 1.9 2.0 2.3 2.6 2.6 3.7
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 or 400.3+N 230.1 or 400.3+N
Airflow – static pressure m3/h – Pa 700 – 32 1100 – 44 1100 – 44 1150 – 72 1400 – 96 1500 – 80
Liq. pipe diameter Ø (") 3/8 3/8 3/8 3/8 3/8 3/8
Gas pipe diameter Ø (") 1/2 1/2 1/2 5/8 3/4 3/4
Ext. dimens. (length x width x height) mm 870x394x630 870x394x630 870x394x630 870x394x630 920x394x730 920x394x730
Int. dimens. (length x width x height) mm 726x555x218 925x660x280 925x660x280 925x660x280 925x660x280 925x660x280
Total in./out. unit dist. (1) m 50 50 50 50 50 50
Vertical in./out. unit dist. (1) m 25 25 25 25 25 25
Net weight – outdoor Kg 53 56 56 58 62 68
Net weight – indoor Kg 31 37 37 39 43 44
DXCBZ/FTBZ TECHNICAL SPECIFICATIONS
OUTDOOR MODEL 371 401 451 501 701 721
INDOOR MODEL 371 401 451 501 721 721
Nominal cooling capacity kW 11.0 11.8 13.5 14.8 16.8 18.6
Nominal cooling capacity R.T. 3.1 3.4 3.8 4.2 4.8 5.3
Nominal heating capacity kW 12.0 12.8 14.0 15.3 19.8 20.7
Total power input – cooling kW 4.3 4.6 5.4 5.7 7.3 7.8
Total power input – heating kW 3.7 4.1 4.9 5.0 6.7 7.5
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – static pressure m3/h – Pa 2200 – 96 2300 – 80 2400 – 94 2500 – 76 3000 – 140 3000 – 140
Liq. pipe diameter Ø (") 1/2 1/2 1/2 1/2 1/2 1/2
Gas pipe diameter Ø (") 3/4 3/4 7/8 7/8 7/8 7/8
Ext. dimens. (length x width x height) mm 950x374x1143 950x374x1143 950x374x1143 950x374x1143 950x374x1143 1035x424x1335
Int. dimens. (length x width x height) mm 1250x750x315 1250x750x315 1250x750x315 1250x750x315 1250x805x369 1250x805x369
Total dist. in./out. units m 50 50 50 50 50 50
Vertical in./out. unit dist. (1) m 25 25 25 25 25 25
Net weight – outdoor Kg 89 89 109 109 130 135
Net weight – indoor Kg 59 59 61 61 71 71
(1) For distances over 25 m we recommend installing an oil separator Voltage for indoor unit 230.1 50 Hz ~
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
DXCZ/FTZ TECHNICAL SPECIFICATIONS
31
A03/3
ENERGY SAVING
Head pressure control by frequency converter or voltage converter
AIR QUALITY
Gravimetric filter in return G4
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Indoor unit equipment and accessories painted in RAL 1013 polyester powder coating
Connections on rear, outdoor unit.
Magnetothermics in electrical panel
Power supply at 60Hz and voltages
230, 208, etc. (depending on models)
Option of manufacturing units with symmetric configurationAnti-freeze heater for condenser in tray
Fireproof filter class M0
Thermoacoustic insulation class M0
Hot gas bypass
Discharge plenum and return
Grille discharge plenum and return
3 and 5 outlet nozzle plenum
Condensate evacuation pump
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Anti-corrosion treatment in piping with galval type coating
Prepared for disassemblyOil separator No refrigerant and no flare valves
MAINTENANCE
Service valves External Schrader valves for pressure test
Clogged filter indircation
Split filter
REGULATION AND CONTROL
Pressure switches
Operation for three phase evaporator
ARIA thermostat
PGD thermostat
Infrared remote control
SUPER SI thermostat (man. 24 V)
DSX@ thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
32
A03/4
AXCZ/AXCBZ “Dual” FTZ/FTBZ
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
OUTDOOR MODEL ACXZ 402 ACXZ 442 ACXZ 452 ACXZ 472 ACXZ 502 ACXZ 542
INDOOR MODEL FTZ 201+201 FTZ 221+221 FTZ 201+251 FTZ 221+251 FTZ 251+251 FTZ 271+271
Nominal cooling capacity kW 5.4 + 5.4 6.0 + 6.0 5.4 + 7.4 6.0 + 7.4 7.4 + 7.4 7.9 + 7.9
Nominal cooling capacity R.T. 1.5 + 1.5 1.7 + 1.7 1.5 + 2.1 1.7 + 2.1 2.1 + 2.1 2.2 + 2.2
Total power input kW 4.2 4.4 4.7 4.8 5.14 – 5.06 5.38 – 5.46
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 or 400.3+N 230.1 or 400.3+N
Airflow m3/h -m3/h 1100 – 1100 1100 – 1100 1100 – 1150 1100 – 1150 1150 – 1150 1400 – 1400
static pressure Pa 44 44 44 – 72 44 – 72 72 – 72 96 – 96
Liq. pipe diameter Ø (") 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8
Gas pipe diameter Ø (") 1/2 – 1/2 1/2 – 1/2 1/2 – 5/8 1/2 – 5/8 5/8 – 5/8 3/4 – 3/4
Ext. dimens. (length x width x height) mm 950x407x1349 950x407x1349 950x407x1349 950x407x1349 950x407x1349 950x407x1349
In. dimens. (length x width x height) mmSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
models
Total dist. in./out. units m 50 50 50 50 50 50
Vertical dist. in./out. units m 25 25 25 25 25 25
Net weight – outdoor Kg 131 135 138 139 141 176
Net weight – indoor Kg 37 + 37 37 + 37 37 + 39 37 + 39 39 + 39 43 + 43
AXCZ “Dual”/FTZ TECHNICAL SPECIFICATIONS
AXIAL CONDENSER
DUCTABLE INDOOR UNITS ADVANCE
Maximum flexibility for air conditioning through ducts of commercial premisesAXCZ “Dual”
Cooling only
AXCBZ “Dual”Heat pump
FTZCooling only
FTBZHeat pump
• Cooling capacities ranging from 10.8 to 15.8 kW
• Outdoor units with standard blue fin pre-treated coils
• 3-speed indoor fan
MAIN FEATURESThe units in the AXCZ/FTZ and AXCBZ/FTBZ DUAL series are sets compris-ing a two-circuit axial condenser unit, in general not the same, and two direct expansion fan coil evaporator units. The reduced height of the indoor units make them ideal for fast installation in false ceilings, with the unit either sup-ported or suspended.
• Maximum connection distances between indoor and outdoor units of 50 metres.
• ETN thermostat
33
A03/4
Voltage for indoor unit 230.1 50 Hz ~
OUTDOOR MODEL ACXBZ 402 ACXBZ 442 ACXBZ 452 ACXBZ 472 ACXBZ 502 ACXBZ 542
INDOOR MODEL FTBZ 201+201 FTBZ 221+221 FTBZ 201+251 FTBZ 221+251 FTBZ 251+251 FTBZ 271+271
Nominal cooling capacity kW 5.2 + 5.2 6.0 + 6.0 5.2 + 7.0 6.0 + 7.0 7.0 + 7.0 7.5 + 7.5
Nominal cooling capacity R.T. 1.5 + 1.5 1.7 + 1.7 1.5 + 2.0 1.7 + 2.0 2.0 + 2.0 2.1 + 2.1
Nominal heating capacity kW 6.2 + 6.2 6.6 + 6.6 6.2 + 8.1 6.6 + 8.1 8.1 + 8.1 8.3 + 8.3
Total power input – cooling kW 4.2 4.4 4.7 4.8 5.14 – 5.06 5.38 – 5.46
Total power input – heating kW 3.6 3.7 4.0 4.0 4.40 – 4.32 4.60 – 4.64
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 – 400.3+N 230.1 – 400.3+N
Airflow m3/h-m3/h 1100 – 1100 1100 – 1100 1100 – 1150 1100 – 1150 1150 – 1150 1400 – 1400
static pressure Pa 44 44 44 – 72 44 – 72 72 – 72 96 – 96
Liq. pipe diameter Ø (") 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8 3/8 – 3/8
Gas pipe diameter Ø (") 1/2 – 1/2 1/2 – 1/2 1/2 – 5/8 1/2 – 5/8 5/8 – 5/8 3/4 – 3/4
Ext. dimens. (length x width x height) mm 950x407x1349 950x407x1349 950x407x1349 950x407x1349 950x407x1349 950x407x1349
Int. dimens. (length x width x height) mmSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
modelsSee FTBZ
models
Total dist. in./out. units m 50 50 50 50 50 50
Vertical dist. in./out. units m 25 25 25 25 25 25
Net weight – outdoor Kg 137 141 143 145 148 182
Net weight – indoor Kg 37 + 37 37 + 37 37 + 39 37 + 39 39 + 39 43 + 43
AXCBZ “Dual”/FTBZ TECHNICAL SPECIFICATIONS
ENERGY SAVING
Compressor soft-start (depending on models)
Head pressure control by frequency converter or voltage converter
AIR QUALITY
Gravimetric filter in return G4
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Indoor unit equipment and accessories painted in RAL 1013 polyester powder coating
Connections on rear, outdoor unit
Magnetothermics in electrical panel
Power supply at 60Hz and voltages
230, 208, etc. (depending on models)Anti-freeze heater for condenser in tray
Fireproof filter class M0
Thermo-acoustic insulation class M0
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary
electric heating
Anti-corrosion pre-treated coils
Anti-corrosion treatment in piping with galval type coating
No refrigerant and no flare valves
Discharge plenum and return
Grille discharge plenum and return
3 and 5 outlet nozzle plenum
Condensate evacuation pump
MAINTENANCE
Service valves External Schrader valves for pressure test
Clogged filter indication
Split filter
REGULATION AND CONTROL
Pressure switches
High pressure switch auto-reset
Operation for three phase evaporator
ETN thermostat
ARIA thermostat
PGD thermostat
Infrared remote control
SUPER SI thermostat (man. 24 V)
DSX@ thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch reset from thermostat
Unit without thermostat
Ambient temperature wall sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult
Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
34
A04/1 HIGH EFFICIENCY. BASIC LINE
RCAH units are static heat recovery units that can be combined with air-cooled or water-cooled air conditioning systems to provide significant energy savings.
• Airflow rates ranging from 500 to 6000 m3/h
• Exchanger of crossed flows in aluminium, with Eurovent certification
• Reduction of consumptions with a minimum thermal
recovery of 50%
• 3 versions available:RCAH Efficiency over 50%RCAH AE Efficiency over 90%RCAH RCF With built-in R410A refrigerated circuit
• Unit available in horizontal or vertical configuration
• Multiple air supply and return options
• Easy accessibility and maintenance of components
• Double panel with insulation structure
• G4 filters included
MAIN FEATURES
HEAT RECOVERY UNITS
Optimisation of the performance ofthe air-conditioningfacilities
RCAH
RCAH TECHNICAL SPECIFICATIONS
MODEL 5 10 20 30 40
Maximum airflow m3/h 500 1000 2000 3200 4300available static pressure Pa 155 125 130 160 180Efficiency % 58.7 56.4 50.0 53.8 54.6Recovered capacity kW 2.4 4.7 8.3 14.3 19.5Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 400.3Maximum input current A 1.4 3.0 7.8 11.4 6.6Sound level at 1 m dB (A) 51.0 52.0 58.0 59.0 62.0Dimensions (length x width x height) mm 750x750x295 900x900x410 1000x1000x470 1300x1300x530 1400x1400x705Weight Kg 41 68 99 155 235
MODEL 50 60
Maximum airflow m3/h 5000 6000available static pressure Pa 99 188Efficiency % 53.8 53.1Recovered capacity kW 22.4 26.5Power supply (50 Hz ~) V 400.3 400.3Maximum input current A 11.2 10.8Sound level at 1 m dB (A) 63.7 64.5Dimensions (length x width x height) mm 1700x1350x705 1900x1450x755Weight Kg 235 273
SE
LF-C
ON
TAIN
ED
AIR
-TO
-AIR
UN
ITS
Performance referring to entry of renewal air at -5ºC (80% RH) and temperature of the extracted air at 20ºC (50% RH)Maximum fan speed
35
A04/1
ENERGY SAVING
Brushless Fans
Adiabatic cooling kit
AIR QUALITY
Filters F6-F7-F8
Air quality control
UNIT INSTALLATION
By-pass.
Electric heater
Hot water heating coil
(indoor or outdoor)
Cold water cooling coil
3-way valve with actuator
Constant flow rate control
Clogged filter indication
Circular opening
Flexible gasket
Anti-freeze thermostat
Outdoor installation kit
REGULATION AND CONTROL
On/off control and 3-speed switch.
Remote temperature sensor
Basic electronic control
Advanced electronic control
Versions for other climates Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
RCAH AE TECHNICAL SPECIFICATIONS
MODEL 5 10 15 20
Maximum airflow m3/h 500 1000 1500 2000available static pressure Pa 85 130 150 215Efficiency % 90.0 90.1 90.1 90.0Recovered capacity kW 4.1 8.2 12.3 16.3Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1Maximum input current A 3.0 6.2 14.2 11.4Sound level at 1 m dB (A) 52.0 55.0 60.0 59.0Dimensions (length x width x height) mm 1150x860x385 1450x1230x410 1700x1230x490 1700x1230x630Weight Kg 75 120 175 220
RCAH RCF TECHNICAL SPECIFICATIONS
MODEL 10 15 20 25
Maximum airflow m3/h 900 1400 2000 2600discharge static pressure Pa 225 154 187 179return static pressure Pa 184 122 130 148Efficiency (1) % 46.7 44.6 49.2 47.8Total cooling capacity (1) kW 5.4 8.2 12.2 15.0EER (1) W/W 2.8 2.6 2.6 2.9Efficiency (2) % 54.0 51.4 56.9 55.2Total heating capacity (2) kW 8.8 13.7 21.0 26.5COP (2) W/W 6.1 5.6 5.7 5.9Power supply (50 Hz ~) V 230.1 230.1 230.1 400.3Maximum input current A 14.6 21.6 36.3 22.6Sound level at 1 m dB (A) 55.0 52.0 59.0 58.0Dimensions (length x width x height) mm 1450x1230x470 1450x1230x470 1700x1560x530 1700x1560x530Weight Kg 212 225 258 258
MODEL 30 40
Maximum airflow m3/h 3300 4000discharge static pressure Pa 211 159return static pressure Pa 153 133Efficiency (1) % 48.8 47.8Total cooling capacity (1) kW 20.6 23.5EER (1) W/W 2.9 2.8Efficiency (2) % 56.4 55.2Total heating capacity (2) kW 35.1 40.4COP (2) W/W 6.0 5.6Power supply (50 Hz ~) V 400.3 400.3Maximum input current A 26.9 24.8Sound level at 1 m dB (A) 58.0 62.0Dimensions (length x width x height) mm 1900x1700x705 1900x1700x705Weight Kg 305 315
Performance referring to entry of renewal air at -7ºC (80% RH) and temperature of the extracted air at 20ºC (55% RH)Maximum fan speed
(1) Performance referring to entry of renewal air at 32ºC (50% RH) and temperature of the extracted air at 26°C (50% RH)(2) Performance referring to entry of renewal air at -5ºC (80% RH) and temperature of the extracted air at 20°C (50% RH)
SE
LF-CO
NTA
INE
D A
IR-T
O-A
IR U
NIT
S
37
BRoof Top standard version axial fans Page 38
Roof Top standard version axial fans RCF cooling recovery Page 40
Roof Top standard version centrifugal fans Page 42
Roof Top standard version centrifugal fans RCF cooling recovery Page 44
Roof Top standard version MINI centrifugal fans Page 46
ROOF TOP AIR-TO-AIR
38
B01
MODEL 1402 1602 2002 2402 3002
Nominal cooling capacity kW 40.7 46.2 61.2 71.5 84.5
Nominal cooling capacity R.T. 11.6 13.1 17.4 20.3 24.0
Nominal heating capacity kW 42.2 48.6 63.4 74.6 87.5
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
EER kW/kW 2.7 2.7 2.7 2.8 3.0
COP kW/kW 3.0 3.0 3.0 3.1 3.3
Cooling energy rating (1) 0 C C C C B
Heating energy rating (1) 0 D D D C B
Airflow – static pressure m3/h – Pa 7800-100 9500 – 100 12318 – 135 14075 – 115 14980 – 115
Dimensions (length x width x height) mm 2702x2300x1647 2702x2300x1647 2702x2300x1647 2702x2300x1832 2702x2300x2010
Net weight Kg 1200 1200 1236 1250 1300
RXCA/RXCBA TECHNICAL SPECIFICATIONS
AXIAL FANSRoof top solutions for high flow rates, flexible and adaptable for each project
MAIN FEATURES
• Cooling capacities ranging from 40.7 to 192.3 kW
• Scroll Compressors
• Maximum partialisation up to 9 stages according to models
• Maximum air quality and comfort. Option to install F type high efficiency filters (F6 to F9)
• 3 versions available: standard (STD), with gas burner module (GAS) and the special high ambient temperature version (ATA)
• Thermostats and controls supplied as standard for units with electromagnetic regulation
ARIA – models 1602 to 4502 PGD – models 5002 to 6002
The RXCA-RXCBA series units are self-contained compact rooftop units that are specially designed for installation on rooftops, roof terraces or in any other outdoor location with air distributed treated in ducts.
ROOF TOP UNITS
RXCACooling only
RXCBAHeat pump
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
RO
OF
TO
P A
IR-T
O-A
IR
(1) according to EUROVENT
39
B01
MODEL 3502 4002 4502 5002 6002
Nominal cooling capacity kW 105.2 115.0 142.6 162.0 192.3
Nominal cooling capacity R.T. 29.9 32.7 40.5 46.1 54.7
Nominal heating capacity kW 109.8 120.0 148.7 167.8 199.4
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
EER kW/kW 2.9 3.1 2.9 3.0 2.9
COP kW/kW 3.6 3.5 3.2 3.3 3.3
Cooling energy rating (1) 0 B A B B B
Heating energy rating (1) 0 A A C B B
Airflow – static pressure m3/h – Pa 17901 – 125 20258-125 25083 – 125 28100 – 150 32800 – 175
Dimensions (length x width x height) mm 4800x2100x1872 4800x2100x1872 4800x2100x1872 4800x2100x2222 4800x2100x2222
Net weight Kg 2200 2210 2240 2600 2710
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start
Soft-start of the indoor and/or outdoor fan
Heat recovery of cooling units(R-404a, etc.)
EC plugfan type indoor fan
EC type axial fans
Head pressure control by voltage converter
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
Outdoor module for F Filterson rail
New airsupply damper
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
Outdoor section fans low sound level
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Upgraded motors
Control of indoor flow when the filters clog up (with EC plugfan type indoor fan)
Anti-freeze heater for condenser in tray
Bottom indoor air discharge
Top indoor air discharge
Rear indoor air discharge (with EC plugfan fans)
Bottom indoor air return
Top indoor air return
Fireproof filter class M0
Thermo-acoustic insulation class M0
Gas burner
Hot gas bypass
Double speed condensation control models 1402/3502
All or nothing condensation control in one fan models 4002/4502
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Roof curb
Condensation fan with pressure available
RCCBA with centrifuge condensation fan
Condensation tray in outdoor section
Protective grille in outdoor section exchangers
Drip Separator
MAINTENANCE
Service valvesPressure gauges outdoors to read pressuresExternal Schrader valves for pressure test
Clogged filter indication
REGULATION AND CONTROL
PGD thermostat
DSX@ thermostat(requires operation 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch reset from thermostat
Unit without thermostat
Ambient temperature wall sensor
Return temperature sensor (ARIA)
Temperature sensor in duct
Air quality sensor
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Option for customising software with specific functions for the customer
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
RO
OF T
OP
AIR
-TO-A
IR
RXCA/RXCBA TECHNICAL SPECIFICATIONS
40
B03 AXIAL FANS
HEAT RECOVERYRoof top solution with cooling recovery. Maximum performance in the minimum space
MAIN FEATURES
• Cooling capacities ranging from 53.1 to 233.4 kW • Scroll Compressors• Maximum partialisation up to 9 stages according to
models• Maximum air quality and comfort. Option to install F type
high efficiency filters (F6 to F9)• 3 versions available: with cooling heat recovery (RCF),
with gas burner module (GAS) and special high ambient temperature version (ATA)
• Thermostat – PGD
The RXCA/RXCBA RCF series units are self-contained compact rooftop units that are specially designed for installation on rooftops, roof terraces or in any other outdoor location with air distributed treated in ducts. The heat recovery system uses an additional cooling circuit as a heat exchanger. This purpose of this new circuit is to transfer the energy from the exhaust air to the new ventilation air.
ROOF TOP UNITS
RXCA RCFCooling only
RXCBA RCFHeat pump
MODEL 1402 1602 2002 2402 3002Total cooling capacity kW 53.1 60.6 75.4 92.3 101.9Main circuit cooling capacity kW 40.2 46.6 58.9 71.1 80.2Recovery circuit cooling capacity kW 12.9 14.0 16.5 21.2 21.7Total cooling capacity R.T. 15.1 17.2 21.4 26.2 29.0Main circuit cooling capacity R.T. 11.4 13.2 16.7 20.2 22.8Recovery circuit cooling capacity R.T. 3.7 4.0 4.7 6.0 6.2Total heating capacity kW 55.7 60.1 76.9 93.1 105.5Main circuit heating capacity kW 43.8 47.2 61.7 72.5 85.1Recovery circuit heating capacity kW 11.9 12.9 15.2 20.6 20.4Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+NEER 0 2.9 2.9 2.8 2.9 3.0COP 0 3.4 3.4 3.2 3.2 3.3Cooling energy rating (1) 0 B B C B BHeating energy rating (1) 0 B B C C BAirflow m3/h 7,800 9,500 12,318 14,075 14,980Available discharge pressure Pa 100 100 135 115 115Available return pressure Pa 75 85 85 85 85Dimensions (length x width x height) mm 2702x2300x2175 2702x2300x2175 2702x2300x2175 2702x2300x2360 2702x2300x2540Net weight Kg 1420 1425 1475 1540 1604
RXCA RCF / RXCBA RCF TECHNICAL SPECIFICATIONS
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
RO
OF
TO
P A
IR-T
O-A
IR
41
B03
MODEL 3502 4002 4502 5002 6002Total cooling capacity kW 125.1 141.4 178.9 202.9 233.4Main circuit cooling capacity kW 100.5 110.4 141.3 160.9 190.9Recovery circuit cooling capacity kW 24.6 31.0 37.6 42.0 42.5Total cooling capacity R.T. 35.6 40.2 50.9 57.7 66.4Main circuit cooling capacity R.T. 28.6 31.4 40.2 45.7 54.3Recovery circuit cooling capacity R.T. 7.0 8.8 10.7 11.9 12.1Total heating capacity kW 130.6 146.9 179.8 202.9 233.9Main circuit heating capacity kW 106.7 116.7 144.5 163.1 193.8Recovery circuit heating capacity kW 23.9 30.2 35.3 39.8 40.1Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+NEER kW 3.3 3.1 3.0 3.1 3.0COP kW 3.7 3.5 3.3 3.4 3.3Cooling energy rating (1) kW A A B A BHeating energy rating (1) kW A A B B BAirflow m3/h 17,901 20,258 25,083 28,100 32,800Available discharge pressure Pa 125 125 125 150 175Available return pressure Pa 70 85 85 85 100Dimensions (length x width x height) mm 4800x2100x2410 4800x2100x2410 4800x2100x2410 4800x2100x2760 4800x2100x2760Net weight Kg 2650 2780 2820 3450 3480
RXCA RCF / RXCBA RCF TECHNICAL SPECIFICATIONS
RO
OF T
OP
AIR
-TO-A
IR
ENERGY SAVING
Thermal or enthalpy regulation for incorporated free cooling with PCO control card and PGD control
Compressor soft-start
Soft-start ofindoor and/or outdoor fan
Head pressure controlby frequency converter
Heat recovery of cooling units (R-404a, etc.)
EC plugfan type indoor fan
EC type axial fans
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
Outdoor module for F Filters on rail
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
Outdoor section fans low sound level
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Upgraded motors
Indoor flow rate control when the filters clog upAnti-freeze heater for condenser in tray
Bottom indoor air discharge
Rear indoor air discharge (with EC plugfan fans)
Top indoor air return
Fireproof filter class M0
Thermo-acoustic insulation class M0
Gas burner
Hot gas bypass
Double speed condensation control models 1402/3502
All or nothing condensation control in one fan models 4002/4502
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Roof curb
Condensation fan with pressure available
RCCBA with centrifuge condensation fan
Condensation tray in outdoor section
Protective grille in outdoor section exchangers
Drip separator
MAINTENANCE
Service valvesPressure gauges outdoors to read pressuresExternal Schrader valves for pressure test
Clogged filter indication
REGULATION AND CONTROL
PGD thermostat
DSX@ thermostat
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch reset from thermostat
Unit without thermostat
Ambient temperature wall sensor
Return temperature sensor
Temperature sensor in duct
Air quality sensor
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
42
B04
RO
OF
TO
P A
IR-T
O-A
IR
CENTRIFUGAL FANSShopping centres,multiplex cinemas, large department stores, etc.
MAIN FEATURES
• Cooling capacities ranging from 40.7 to 84.5 kW • Scroll Compressors• Maximum partialisation up to 4 stages according to
models• Maximum air quality and comfort. Option to install F type
high efficiency filters (F6 to F9)• 3 versions available: standard (STD), with gas burner
module (GAS) and the special high ambient temperature version (ATA)
• Standard thermostats and controls for standard units with electromechanical regulation ARIA – models 1402 to 3002
The RCCA/RCCBA series units are self-contained compact roof top units with centrifugal fans on the two sections, suitable for indoor installation. Air distribution is channelled through ducts.
ROOF TOP UNITS
RCCACooling only
RCCBAHeat pump
MODEL 1402 1602 2002 2402 3002
Nominal cooling capacity kW 40.7 46.2 61.2 71.5 84.5
Nominal cooling capacity R.T. 11.6 13.1 17.4 20.3 24.0
Nominal heating capacity kW 42.2 48.6 63.4 74.6 87.5
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
EER kW/kW 2.7 2.6 2.6 2.7 2.8
COP kW/kW 2.9 2.8 2.9 3.0 3.2
Cooling energy rating 0 C D D C C
Heating energy rating 0 D D D D C
Airflow – Static pressure m3/h – Pa 7800-100 9500 – 100 12318 – 135 14075 – 115 14980 – 115
Dimensions (length x width x height) mm 2702x2300x2185 2702x2300x2185 2702x2300x2185 2702x2300x2390 2702x2300x2550
Net weight Kg 1500 1500 1536 1550 1600
RCCA/RCCB TECHNICAL SPECIFICATIONS
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
OUTDOOR SECTION INDOOR SECTION
43
B04
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start
Soft-start of the indoor and/or outdoor fan
Heat recovery of cooling units (R-404a, etc.)
Head pressure control by frequency converter.
EC plugfan type indoor fan
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
Outdoor module for F Filters on rail
New air supply damper
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Upgraded motors
Indoor flow rate controlwhen the filters clog up
Anti-freeze heater for condenser in tray
Bottom indoor air discharge
Top indoor air discharge
Rear indoor air discharge(with EC plugfan fans)
Bottom indoor air return
Top indoor air return
Fireproof filter class M0
Gas burner (essential PGD thermostat)
Thermo-acoustic insulation class M0
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Roof curb
Condensation fan with higher pressure available
Protective grille in outdoor section exchangers
Drip separator
MAINTENANCE
Service valvesPressure gauges outdoors to read pressuresExternal Schrader valves for pressure test
Clogged filter indication
REGULATION AND CONTROL
PGD thermostat
DSX@ thermostat (with man. 24 V)
SUPER SI thermostat (with man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch reset from thermostat
Unit without thermostat
Ambient temperature wall sensor
Return temperature sensor
Temperature sensor in duct
Air quality sensor
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
RO
OF T
OP
AIR
-TO-A
IR
44
B05
RO
OF
TO
P A
IR-T
O-A
IR
CENTRIFUGAL FANSHEAT RECOVERY
MAIN FEATURES
• Cooling capacities ranging from 53.1 to 101.9 kW
• Scroll Compressors
• Maximum partialisation up to 4 stages according to models
• Maximum air quality and comfort. Option to install F type high efficiency filters (F6 to F9)
• 3 versions available: with cooling heat recovery (RCF), with gas burner module (GAS) and special high ambient temperature version (ATA)
• Thermostat – PGD (all models)
The RCCA/RCCBA RCF series units are self-contained compact roof top units with centrifugal fans on the two sections, suitable for indoor installation. Air distribution is channelled through ducts. The heat recovery system uses an additional cooling circuit as a heat exchanger. This purpose of this new circuit is to transfer the energy from the exhaust air to the new ventilation air.
ROOF TOP UNITS
RCCA RCF Cooling only
RCCBA RCF Heat pump
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
Shopping centres,multiplex cinemas, large department stores, etc.
OUTDOOR SECTION INDOOR SECTION
45
B05
ENERGY SAVING
Thermal or enthalpy regulation for incorporated free cooling with PCO control card and PGD control
Compressor soft-start
Soft-start of the indoor and/or outdoor fan
Heat recovery of cooling units(R-404a, etc.)
Head pressure control by frequency converter.
EC plugfan type indoor fan
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
Outdoor module for F Filters on rail
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Upgraded motors
Indoor flow rate controlwhen the filters clog upAnti-freeze heater for condenser in tray
Bottom indoor air discharge
Rear indoor air discharge(with EC plugfan fans)
Top indoor air return
Fireproof filter class M0
Thermo-acoustic insulation class M0
Gas Burner (essential PGD thermostat)
Hot gas bypass
Hot water heating coils
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Roof curb
Condensation fan with pressure available
Protective grille in outdoor section exchangers
Drip separator
MAINTENANCE
Service valvesPressure gauges outdoors to read pressuresExternal Schrader valves for pressure test
Clogged filter indication
REGULATION AND CONTROL
PGD thermostat
DSX@ thermostat (with man. 24 V)
SUPER SI thermostat (with man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
Ambient temperature wall sensor
Temperature sensor in duct
Air quality sensor
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
MODEL 1402 1602 2002 2402 3002
Total cooling capacity kW 53.1 60.6 75.4 92.3 101.9
Main circuit cooling capacity kW 40.2 46.6 58.9 71.1 80.2
Recovery circuit cooling capacity kW 12.9 14.0 16.5 21.2 21.7
Total cooling capacity R.T. 15.1 17.2 21.4 26.2 29.0
Main circuit cooling capacity R.T. 11.4 13.2 16.7 20.2 22.8
Recovery circuit cooling capacity R.T. 3.7 4.0 4.7 6.0 6.2
Total heating capacity kW 55.7 60.1 76.9 93.1 105.5
Main circuit heating capacity kW 43.8 47.2 61.7 72.5 85.1
Recovery circuit heating capacity kW 11.9 12.9 15.2 20.6 20.4
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
EER kW/kW 2.9 2.9 2.8 2.9 3.0
COP kW/kW 3.3 3.3 3.1 3.1 3.2
Cooling energy rating 0 B B C B B
Heating energy rating 0 B B C C C
Airflow m3/h 7,800 9,500 12,318 14,075 14,980
Available discharge pressure Pa 100 100 135 115 115
Available return pressure Pa 75 85 85 85 85
Dimensions (length x width x height) mm 2702x2300x2185 2702x2300x2185 2702x2300x2185 2702x2300x2390 2702x2300x2550
Net weight Kg 1720 1725 1775 1840 1904
RCCA/RCCB TECHNICAL SPECIFICATIONS
RO
OF T
OP
AIR
-TO-A
IR
46
B02 MINI CENTRIFUGAL FANS
RCAZCooling only
RCABZHeat pump
ROOF TOP TYPE UNITS
• Cooling capacities ranging from 29.7 to 70 kW • Thermostats and controls supplied as standard for units
with electromagnetic regulation SUPER SI (man. 24 V)- all models
MAIN FEATURES
The RCAZ/RCABZ series units are self-contained compact roof top units with centrifugal fans on the two sections, suitable for indoor installation. Air distribution is channelled through ducts.For use in shopping centres, multiplex cinemas, large department stores, etc.
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
RCAZ TECHNICAL SPECIFICATIONS
MODEL 1001 1201 1401 1501
Total cooling capacity kW 30.0 35.0 37.2 44.4Total cooling capacity R.T. 8.5 10.0 10.6 12.6Total power input kW 13.6 16.3 16.5 19.3Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NAirflow (in.-out.) m3/h 7000 – 10500 8000 – 12500 8000 – 12500 9000 – 14000indoor static pressure Pa 82 85 85 110outdoor static pressure Pa 65 50 60 80Dimensions (length x width x height) mm 1733x2132x1350 1733x2132x1350 1733x2132x1350 1733x2132x1350Net weight Kg 710 740 765 780
MODEL 2002 2302 2402
Total cooling capacity kW 60.0 67.0 72.0Total cooling capacity R.T. 17.1 19.1 20.5Total power input kW 25.5 27.9 31.3Power supply (50 Hz ~) V 230.3 or 400.3+N 400.3+N 230.3 or 400.3+NAirflow (in.-out.) m3/h 11000 – 18000 12000 – 18500 12000 – 18500indoor static pressure Pa 190 190 190outdoor static pressure Pa 60 78 78Dimensions (length x width x height) mm 2184x2312x1462 2184x2312x1462 2184x2312x1462Net weight Kg 930 939 955
RO
OF
TO
P A
IR-T
O-A
IR
Roof top solutions for high flow rates, flexible and adaptable for each project
47
B02
RCABZ TECHNICAL SPECIFICATIONS
MODEL 1001 1201 1402 1502
Total cooling capacity kW 29.7 35.0 36.4 44.2Total cooling capacity R.T. 8.4 10.0 10.3 12.6Total heating capacity kW 31.7 37.0 38.6 46.6Total power input – cooling kW 14.1 16.6 16.5 20.0Total power input – heating kW 12.2 14.2 14.3 16.9Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NAirflow (in.-out.) m3/h 7000 – 10500 8000 – 12500 8000 – 13600 10000 – 15600indoor static pressure Pa 82 85 85 125outdoor static pressure Pa 65 50 80 100Dimensions (length x width x height) mm 1733x2132x1350 1733x2132x1350 2075x2262x1350 2075x2262x1350Net weight Kg 715 745 792 807
MODEL 1602 2002 2302 2402
Total cooling capacity kW 45.4 59.4 66.0 70.0Total cooling capacity R.T. 12.9 16.9 18.8 19.9Total heating capacity kW 48.8 63.4 70.0 74.0Total power input – cooling kW 20.2 26.4 28.7 31.1Total power input – heating kW 17.4 22.2 25.0 26.4Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 400.3+N 230.3 or 400.3+NAirflow (in.-out.) m3/h 10000 – 16000 11000 – 22000 12000 – 23000 12000 – 23000indoor static pressure Pa 125 190 190 190outdoor static pressure Pa 90 120 135 135Dimensions (length x width x height) mm 2075x2262x1350 2776x2175x1600 2776x2175x1600 2776x2175x1600Net weight Kg 815 1150 1200 1250
HITECSA recommends the installation of an anti-freeze heater in the water collection tray for ambient temperatures of less than 5°C.
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start
Fan soft-startindoor and/or outdoor fan
Indoor EC radial fan(depending on models)
Head pressure controlby frequency converter
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
Option of fresh air supply damper
Air quality sensor
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Air discharge bottom evaporator
Air discharge top evaporator
Air discharge top condenser
Protection grillein outdoor exchanger
Outdoor installation kit
Upgraded motors
Anti-freeze resistanceoperation in collection tray
Fireproof filter class M0
Thermo-acoustic insulation class M0
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Condenser filter
Split filter
REGULATION AND CONTROLARIA thermostat PGD thermostat DSX@ thermostat (man. 24 V)HoneyWell T8376B thermostat(man. 24 V)Alarm indication
Smoke detectionON/OFF remoteSeparate electrical panelOption of master-slave operation High pressure switch resetfrom thermostatUnit without thermostatWall mounted ambienttemperature sensorReturn temperature sensorTemperature sensor in ductOperation for redundant machineCentralised integrated management operation
Operation without neutralScheduling function and Modbus connection, etc. consultThermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
RO
OF T
OP
AIR
-TO-A
IR
48
49
CWATER/AIR compact horizontal exchanger COAXIAL Page 50
WATER/AIR compact horizontal exchanger PLATES Page 52
AIR/AIR compact vertical exchanger COAXIAL Page 54
WATER/WATER compact vertical PLATES exchanger Page 56
SELF-CONTAINED WATER-TO-AIR UNITS
50
C01 COMPACT HORIZONTAL SELF-CONTAINED UNITS
WCHZCooling only
WCHBZHeat pump
• Cooling capacities ranging from 6.4 to 25.1 kW • Coaxial condenser• Airflows up to 4,600 m3/h• Easy access to inside the unit for maintenance • Reduced dimensions • T-8376B thermostat
MAIN FEATURES
The WCHZ/WCHBZ series are self-contained horizontal units equipped with a water-cooled coaxial condenser, suitable for connection to a network of air distribution ducts.
HITECSA recommends installing units with coaxial condensers given their great robustness for possible impurities in the circuit.
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SELF-CONTAINED WATER-TO-AIR UNITS
Robust and adaptable solutions for facilities by ENERGY LOOP
WCHZ (cooling only) TECHNICAL SPECIFICATIONS
MODEL 201 251 271 351 401
Nominal cooling capacity kW 6.4 8.1 9.0 11.3 13.4
Nominal cooling capacity R.T. 1.8 2.3 2.6 3.2 3.8
Total power input – cooling kW 2.1 2.7 2.7 3.3 4.4
Power supply (50 Hz ~) V 230.1 230.1 230.1 or 400.3+N 230.1- 230.3 o 400.3+N 230.3 or 400.3+N
Airflow – static pressure m3/h – Pa 1500 – 58 1600 – 55 2000 – 77 2300 – 86 2400 – 94
Water connections Ø (") 1/2 1/2 1/2 1/2 3/4
Dimensions (length x width x height) mm 990x520x425 1080x657x484 1200x750x484 1200x750x484 1280x850x542
Net weight Kg 87 104 123 130 147
MODEL 501 701 721 751
Nominal cooling capacity kW 16.6 20.6 22.2 25.1
Nominal cooling capacity R.T. 4.7 5.9 6.3 7.1
Total power input – cooling kW 5.2 6.6 6.2 7.7
Power supply (50 Hz ~) V 230.3 or 400.3+N 400.3+N 230.3 or400.3+N
230.3 or400.3+N
Airflow – static pressure m3/h – Pa 3500 – 70 4300 – 80 4500 – 75 4600 – 120
Water connections Ø (") 3/4 1 1 1
Dimensions (length x width x height) mm 1400x900x542 1600x1030x630 1600x1030x630 1600x1030x630
Net weight Kg 160 240 259 259
SE
LF-C
ON
TAIN
ED
WA
TE
R-T
O-A
IR U
NIT
S
51
C01WCHBZ (heat pump) TECHNICAL SPECIFICATIONS
MODEL 201 251 351 401 501
Nominal cooling capacity kW 6.0 8.1 11.1 13.0 16.5
Nominal cooling capacity R.T. 1.7 2.3 3.2 3.7 4.7
Nominal heating capacity kW 6.9 9.1 12.6 16.0 19.6
Total power input – cooling kW 1.9 2.6 3.4 4.3 5.1
Total power input – heating kW 1.8 2.5 3.2 4.2 5.0
Power supply (50 Hz ~) V 230.1 230.1 or 400.3+N
230.1-230.3 or 400.3+N
230.3 or 400.3+N 230.3 or 400.3+N
Airflow – static pressure m3/h – Pa 1500 – 58 2000 – 55 2300 – 86 2400 – 94 3500 – 70
Water connections Ø (") 1/2 1/2 1/2 3/4 3/4
Dimensions (length x width x height) mm 1080x675x484 1200x750x484 1200x750x484 1280x850x542 1400x900x542
Net weight Kg 104 130 130 160 185
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers(depending on models)
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start(depending on models)
Fan soft-start(depending on models)
EC radial indoor fan(depending on models)
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Differential pressure switch
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Outdoor installation kit
Upgraded motors
Anti-freeze heater for condenser in tray
Fireproof filter class M0
Hot gas bypass
Pressostatic valve
Inverted intake or discharge
Base guides
Hot water heating coil
Electric resistance coilsfor auxiliary electrical heating
Anti-corrosion pre-treated coils
Seawater condenser
Without water condenser
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Split filter
Pressure gauges
REGULATION AND CONTROL
ETN thermostat
ARIA thermostat
PGD thermostat
DSX@ thermostat
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consultThermostat chapter.
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D W
AT
ER
-TO
-AIR
UN
ITS
52
C02 COMPACT HORIZONTAL SELF-CONTAINED UNITS
WPHZCooling only
WPHBZHeat pump
• Cooling capacities ranging from 2.7 to 40.5 kW • Plate condenser• Airflow of up to 8,000 m3/h• Easy access to inside the unit for maintenance • Thermostats and controls supplied as standard for units
with electromagnetic regulation: ETN (all models)
MAIN FEATURES
The WPHZ/WPHBZ series are self-contained horizontal units equipped with a water-cooled plate heat exchanger, suitable for connection to a network of air distribution ducts.
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SELF-CONTAINED WATER-TO-AIR UNITS
Robust and adaptable solutions for facilities by ENERGY LOOP
WPHZ/WPHBZ TECHNICAL SPECIFICATIONS
MODEL 091 121 141 171
Nominal cooling capacity kW 2.7 3.5 4.1 5.2Nominal cooling capacity R.T. 0.8 1.0 1.2 1.5Nominal heating capacity kW 3.2 4.1 4.8 6.1Total power input – cooling kW 1.0 1.2 1.3 1.6Total power input – heating kW 1.2 1.5 1.6 1.8Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1Airflow – static pressure m3/h – Pa 500 – 13 550 – 26 900 – 17 1200 – 110Water connections Ø (") 1/2 1/2 1/2 3/4Dimensions (length x width x height) mm 1055x560x385 1055x560x385 1055x560x385 1055x560x470Net weight Kg 79 80 82 85
MODEL 201 251 351 401
Nominal cooling capacity kW 6.4 8.1 11.9 13.4Nominal cooling capacity R.T. 1.8 2.3 3.4 3.8Nominal heating capacity kW 7.6 9.6 14.0 15.8Total power input – cooling kW 1.8 2.4 3.7 4.3Total power input – heating kW 2.0 2.5 3.8 4.4Power supply (50 Hz ~) V 230.1 230.1 230.1-400.3+N 400.3+NAirflow – static pressure m3/h – Pa 1500 – 58 2000 – 55 2300 – 86 2400 – 94Water connections Ø (") 3/4 3/4 3/4 1Dimensions (length x width x height) mm 1055x560x470 1135x670x530 1135x670x530 1135x670x530Net weight Kg 87 104 115 120
SE
LF-C
ON
TAIN
ED
WA
TE
R-T
O-A
IR U
NIT
S
53
C02
MODEL 501 701 751 1001 1201
Nominal cooling capacity kW 16.6 20.6 25.1 35.4 40.5
Nominal cooling capacity R.T. 4.7 5.9 7.1 10.1 11.5
Nominal heating capacity kW 19.6 24.8 30.1 41.8 49.6
Total power input – cooling kW 4.8 6.4 8.3 11.0 13.4
Total power input – heating kW 5.0 6.6 8.6 11.3 13.8
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – static pressure m3/h – Pa 3500 – 70 4300 – 80 4800 – 100 5800 – 86 8000 – 85
Water connections Ø (") 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2
Dimensions (length x width x height) mm 1385x940x620 1385x940x620 1385x940x620 1600x1040x690 1600x1040x690
Net weight Kg 160 200 225 275 290
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start(depending on models)
Fan soft-start(depending on models)
EC radial indoor fan(depending on models)
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Rear air discharge
Differential pressure switch
Water shut-off electrovalves
Outdoor installation kit
Upgraded motors
Fireproof filter class M0
Thermo-acoustic insulation class M0
Hot gas bypass
Water regulating pressostatic valve
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Without water condenser
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Split filter
REGULATION AND CONTROL
ARIA thermostat
PGD thermostat
SUPER SI thermostat (man. 24 V)
HoneyWell T8376B thermostat(man. 24 V)
Eberle thermostat 7007(man. 24 V)
DSX@ thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D W
AT
ER
-TO
-AIR
UN
ITS
WPHZ/WPHBZ TECHNICAL SPECIFICATIONS
54
WCVBZ 201-351 WCVZ 201-751WCVBZ 401
WCVZ 1001-3603
C02 COMPACT VERTICAL SELF-CONTAINED UNITS
WCVZCooling only
WCVBZHeat pump
• Cooling capacities ranging from 6.0 to 120 kW • Coaxial condenser• Airflow rates of up to 21,500 m3/h• Easy access to inside the unit for maintenance • Reduced dimensions • Thermostats and controls supplied as standard for units
with electromagnetic regulation. T8376B (depending on models) SUPER SI (depending on models)
MAIN FEATURES
The WCVZ/WCVBZ series are self-contained vertical units equipped with a water-cooled coaxial condenser, suitable for connection to a network of distribution ducts.
HITECSA recommends installing units with coaxial condensers given their great robustness for possible impurities in the circuit.
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SELF-CONTAINED WATER-TO-AIR UNITS
Robust and adaptable solutions for facilities by ENERGY LOOP
WCVZ (cooling only) TECHNICAL SPECIFICATIONS
MODEL 201 251 271 351 401 501
Nominal cooling capacity kW 6.4 8.1 9.0 11.9 13.4 16.6
Nominal cooling capacity R.T. 1.8 2.3 2.6 3.4 3.8 4.7
Total power input – cooling kW 1.7 2.1 2.3 3.3 3.5 4.5
Power supply (50 Hz ~) V 230.1 230.1 230.1 or400.3+N
230.1-230.3 or400.3+N
230.3 or400.3+N
230.3 or400.3+N
Airflow – static pressure m3/h – Pa 1500 – 58 2000 – 55 2000 – 77 2300 – 86 2400 – 94 3500 – 70
Water connections Ø (") 1/2 1/2 1/2 1/2 1/2 3/4
Dimensions (length x width x height) mm 628x440x1060 720x550x1200 720x550x1200 720x550x1200 780x550x1350 1140x600x1700
Net weight Kg 105 134 134 141 160 245
MODEL 701 721 751 1001 1201 1002
Nominal cooling capacity kW 20.6 23.0 25.1 35.4 40.5 35.6
Nominal cooling capacity R.T. 5.9 6.5 7.1 10.1 11.5 10.1
Total power input – cooling kW 5.4 5.9 6.3 9.8 11.2 9.7
Power supply (50 Hz ~) V 400.3+N 230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
Airflow – static pressure m3/h – Pa 4300 – 80 4500 – 75 4800 – 100 7400 – 70 8200 – 80 7300 – 87
Water connections Ø (") 1 1 1 2 2 2
Dimensions (length x width x height) mm 1140x600x1700 1140x600x1700 1140x600x1700 1700x870x1600 1700x870x1600 1700x870x1600
Net weight Kg 252 252 258 445 472 470
SE
LF-C
ON
TAIN
ED
WA
TE
R-T
O-A
IR U
NIT
S
55
C02
MODEL 1402 1502 2002 2402 3003 3603
Nominal cooling capacity kW 41.2 50.2 70.8 81.0 105.0 120.0
Nominal cooling capacity R.T. 11.7 14.3 20.1 23.0 29.9 34.1
Total power input – cooling kW 11.3 13.7 19.7 22.4 28.9 33.3
Power supply (50 Hz ~) V 230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
230.3 or 400.3+N
Airflow – static pressure m3/h – Pa 8200 – 80 9000 – 110 11000 – 190 12000 – 190 18000 – 270 21500 – 190
Water connections Ø (") 2 2 2 2 2 2
Dimensions (length x width x height) mm 1700x870x1600 1700x870x1600 1700x980x1950 1700x980x1950 2307x1157x2062 2307x1157x2062
Net weight Kg 515 525 645 706 968 1060
WCVBZ (heat pump) TECHNICAL SPECIFICATIONS
MODEL 201 251 351 401
Nominal cooling capacity kW 6.0 8.1 11.0 13.0
Nominal cooling capacity R.T. 1.7 2.3 3.1 3.7
Nominal heating capacity kW 6.9 9.1 12.6 16.0
Total power input – cooling kW 1.8 2.5 3.3 3.8
Total power input – heating kW 1.8 2.4 3.2 3.8
Power supply (50 Hz ~) V 230.1 230.1 or 400.3+N 230.1-230.3 or 400.3+N 230.3 or 400.3+N
Airflow – static pressure m3/h – Pa 1500 – 58 2000 – 55 2300 – 86 2400 – 94
Water connections Ø (") 1/2 1/2 1/2 1/2
Dimensions (length x width x height) mm 601x625x1000 601x625x1000 601x625x1000 780x550x1350
Net weight Kg 105 134 141 165
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start(depending on models)
Fan soft-start(depending on models)
EC radial indoor fan(depending on models)
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics on electric panel
Power supply at 60Hzand voltages 230, 208, etc.
Outdoor installation kit
Upgraded motors
Anti-freeze heater for condenser tray
Fireproof filter class M0
Hot gas bypass
Water regulating pressostatic
More compact WCVSZ units
WCVCZ units for heating swimming pools
Hot water heating coils (only WCVZ models – cooling only)
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Front discharge (mod. 201/751)
Rear discharge (mod. 1001/3603)
Without water condenser
Seawater condenser
Without compressor
Discharge plenum
Intake grille
Filter in insertable return
Base guides
Pressure gauges
Differential pressure switch
Prepared for disassembly
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Split filter
REGULATION AND CONTROL
ETN thermostat
ARIA thermostat
PGD thermostat
DSX@ thermostat
SUPER SI thermostat
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D W
AT
ER
-TO
-AIR
UN
ITS
WCVZ (cooling only) TECHNICAL SPECIFICATIONS
56
WPVZ 201-751 WPVZ/BZ 1001-4002
C04 COMPACT VERTICAL SELF-CONTAINED UNITS
WPVZCooling only
WPVBZHeat pump
• Cooling capacities ranging from 8.1 to 132 kW • Plate condenser• Airflow of up to 21,500 m3/h• Easy access to inside the unit for maintenance • Thermostats and controls supplied as standard
for units with electronic regulation ETN- models 251-1501 ARIA- models 2002-4002
MAIN FEATURES
The WPVZ/WPVBZ series are self-contained vertical units equipped with water-cooled plate heat exchangers (one or two depending on the model), suitable for connection to a network of air distribution ducts.
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
SELF-CONTAINED WATER-TO-AIR UNITS
Robust and adaptable solutions for facilities by ENERGY LOOP
WPVZ/WPVBZ TECHNICAL SPECIFICATIONS
MODEL 251 351 401 501
Nominal cooling capacity kW 8.1 11.9 13.4 16.6Nominal cooling capacity R.T. 2.3 3.4 3.8 4.7Nominal heating capacity kW 9.6 14.0 15.8 19.6Total power input – cooling kW 2.4 3.7 4.2 4.8Total power input – heating kW 2.5 3.8 4.4 4.9Power supply (50 Hz ~) V 230.1 230.1 or 400.3+N 400.3+N 400.3+NAirflow – static pressure m3/h – Pa 2000 – 55 2300 – 86 2400 – 94 3500 – 70Water connections Ø (") 3/4 1 1 1 1/4Dimensions (length x width x height) mm 720x650x1230 720x650x1230 780x650x1380 1140x700x1730Net weight Kg 139 146 166 251
MODEL 701 751 1001 1201
Nominal cooling capacity kW 21.0 25.5 35.4 42.0Nominal cooling capacity R.T. 6.0 7.3 10.1 11.9Nominal heating capacity kW 24.8 30.1 41.8 49.6Total power input – cooling kW 6.4 8.3 11.0 13.4Total power input – heating kW 6.6 8.6 11.3 13.8Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+NAirflow – static pressure m3/h – Pa 4300 – 80 4800 – 100 7400 – 70 8200 – 80Water connections Ø (") 1 1/4 1 1/2 1 1/2 1 1/2Dimensions (length x width x height) mm 1140x700x1730 1140x700x1730 1790x870x1630 1790x870x1630Net weight Kg 258 265 450 478
SE
LF-C
ON
TAIN
ED
WA
TE
R-T
O-A
IR U
NIT
S
57
C04
MODEL 1501 2002 2402 3002 4002
Nominal cooling capacity kW 54.0 70.8 84.0 108.0 132.0
Nominal cooling capacity R.T. 15.4 20.1 23.9 30.7 37.5
Nominal heating capacity kW 63.7 83.5 99.1 127.4 155.8
Total power input – cooling kW 15.9 22.6 26.5 35.0 43.0
Total power input – heating kW 16.4 23.3 27.3 36.0 44.3
Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+N
Airflow – static pressure m3/h – Pa 9000 – 110 11000 – 190 12000 – 190 18000 – 270 21500 – 190
Water connections Ø (") 1 1/2 1 1/2 1 1/2 2 2
Dimensions (length x width x height) mm 1790x870x1630 1790x980x1980 1790x980x1980 2404x1157x2092 2404x1157x2092
Net weight Kg 515 650 711 973 1065
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
Thermal or enthalpy regulation with PCO control card and PGD control
Compressor soft-start(depending on models)
Fan soft-start(depending on models)
EC radial fan(depending on models)
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Option of manufacturing units with symmetric configuration
Outdoor installation kit
Upgraded motors
Fireproof filter class M0
Thermo-acoustic insulation class M0
Filter in insertable return
Differential pressure switch
Intake grille
Without water condenser
Water regulating pressostatic valve
Rear discharge (mod. 1001-4002)
Front discharge (mod. 201-751)
Discharge plenum
Hot gas bypass
Hot water heating coil
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Clogged filter indication
Split filter
REGULATION AND CONTROL
ARIA thermostat
PGD thermostat
SUPER SI thermostat (man. 24 V)
HoneyWell T8376B thermostat(man. 24 V)
Eberle thermostat 7007(man. 24 V)
DSX@ thermostat (man. 24 V)
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
High pressure switch resetfrom thermostat
Unit without thermostat
Wall mounted ambienttemperature sensor
Return temperature sensor
Temperature sensor in duct
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consultThermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
SE
LF-CO
NTA
INE
D W
AT
ER
-TO
-AIR
UN
ITS
WPVZ/WPVBZ TECHNICAL SPECIFICATIONS
58
59
DMINI ADVANCE i, AIR/WATER units axial fans Page 62
MINI KRONO X, AIR/WATER units axial fans Page 63
KRONO X, AIR/WATER units axial fans medium power Page 65
ADVANCE X, AIR/WATER units axial fans high power, scroll Page 68
ADVANCE XT, AIR/WATER units axial fans high power, screw Page 70
KRONO C, AIR/WATER units centrifugal fans medium power Page 72
ADVANCE W, WATER/WATER units scroll compressors Page 74
ADVANCE WT, WATER/WATER screw compressors Page 77
WATER CHILLER UNITS
60
D01
WA
TE
R C
HIL
LER
UN
ITS
kW
axia
lfa
nsce
ntrif
ugal
fans
KRONO CZ AND CBZ (16 to 78 kW) scroll R407c
140 kW20 kW
MINIADVANCE i(20 to 30 kW)
KRONO XA AND XBA(40 to 136 kW) scroll R410a
MINIKRONO XZ AND XBZ(20 to 35 kW) scroll R407c
Air-Water Range
WATER CHILLER UNITS
40 kW
kW
ADVANCE W (20 to 380 kW) scroll R410a
270 kW
Water-Water Range
WATER CHILLER UNITS
380 kW
61
D01
WA
TE
R C
HILLE
R U
NITS
1650 kW634 kW290 kW
ADVANCE XA and XBA (150 to 634 kW) scroll R410a
ADVANCE XAT (290 to 1650 kW) screw R134
ADVANCE WT (270 to 1120 kW) screw R134
1120 kW
62
D01 AXIAL FANS
MINI ADVANCE iHeat pumpINVERTER
Inverter solution for small power applications. Ideal for underfloor heating
• Cooling capacities ranging from 20 to 30 kW
• Compressors scroll inverter BLDC
• R410A refrigerant
• Energy rating A
• Variable capacity: from 30% of the nominal capacity
• High performance at partial loads
• High precision in the maintenance of the required water temperature
• Optimised unit in heating mode for both fan coil and for underfloor heating
• Includes standard condensation control and water pump
• Electronic expansion valve
• Includes standard water filter
• Ample operating limits in heating mode: Minimum outdoor air temperature -15°C – Maximum water outlet temperature +55ºC
• Modbus communication
• Coil with standard blue prelacquered fin
MAIN FEATURES
The EWFAIB air-water heat pumps are units equipped with an inverter compressor for R410A and water pump.Thanks to its new microprocessor and regulation logic it can operate with a low water flow.
MODEL 20.1 25.1 30.1
Cooling capacity (min/nom/max) (1) kW 7.1 20.2 25.6 8.9 25.0 30.4 10.1 29.3 31.8
Cooling capacity (min/nom/max) (1) R.T. 2.0 5.7 7.3 2.5 7.1 8.6 2.9 8.3 9.0
Power input (1) kW 2.0 6.0 8.5 2.2 7.5 10.2 2.5 9.4 10.6
EER 0 3.56 3.36 3.03 4.11 3.36 2.98 4.09 3.11 3.0
Heating capacity (min/nom/max) (1) kW 6.1 18.1 22.9 8.5 21.7 28.6 9.2 25.1 29.9
Power input (1) kW 2.4 6.2 8.2 3.0 7.1 10.3 3.2 8.5 10.7
COP kW/ kW 2.54 2.91 2.80 2.83 3.04 2.78 2.85 2.95 2.8
EWFAIB TECHNICAL SPECIFICATIONS
ESSER kW/ kW 4.50 4.83 4.63
Power supply (50 Hz ~) V 400.3 + N 400.3 + N 400.3 + N
Water connection (inlet/outlet) Ø (") 1 1/2 1 1/2 1 1/2
Dimensions (length x width x height) mm 1477x538x1625 1477x538x1625 1477x538x1625
Weight Kg 269 285 285
(1) Conditions in heating mode: water inlet 40ºC / water outlet 45ºC, ambient air temperature 7ºC Conditions in cooling mode: water inlet 12ºC / water outlet 7ºC, ambient air temperature 35ºC
UNIT INSTALLATION
Kit without water pump
Tank kit for 112 litres
inlet/outlet valve kit
MAINTENANCE
Pressure gauge kit
REGULATION AND CONTROL
Flow switch
ON/OFF remote control
Sequencer for installationsup to 4 units
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
WATER CHILLER UNITS
WA
TE
R C
HIL
LER
UN
ITS
63
D01AXIAL FANS
MINI KRONO XZCooling only
MINI KRONO XBZHeat pump
WATER CHILLER UNITS
• Cooling capacities ranging from 20.2 to 234.2 kW • Independent cooling circuits • Scroll Compressors • Thermostats and controls supplied as standard for units
with electromagnetic regulation. Microchiller2- models 801-4502 DN 33- models 6004-9004
MAIN FEATURES
The EWXZ/EWXBZ chiller units are compact units designed for outdoor installation on flat roofs, terraces or on the ground.For application in health centres, hotels, offices, industrial process units, hospitals, etc.
EWXZ TECHNICAL SPECIFICATIONS
MODEL 801 1001 1201 1501 1602
Nominal cooling capacity kW 20.5 25.5 30.5 35.5 41.5Nominal cooling capacity R.T. 5.8 7.3 8.7 10.1 11.8Power input – cooling kW 8.2 10.6 14.2 15.5 16.3Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 1 1/2 1 1/2 1 1/2 2 2Water flow l/s 1.0 1.2 1.5 1.7 2.0Water load loss kPa 36 37 36 37 38Dimensions (length x width x height) mm 1520x1019x1455 1520x1019x1455 1520x1019x1455 1520x1019x1805 1864x1307x1455Net weight Kg 257 267 274 328 545
MODEL 2002 2402 3002 3502 4002
Nominal cooling capacity kW 51.0 61.0 71.5 83.3 99.5Nominal cooling capacity R.T. 14.5 17.3 20.3 23.7 28.3Power input – cooling kW 21.2 28.4 31.0 34.7 40.9Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 2 2 2 2 2Water flow l/s 2.4 2.9 3.4 4.0 4.8Water load loss kPa 41 39 40 38 37Dimensions (length x width x height) mm 1864x1307x1455 2174x1407x1505 2174x1407x1805 2450x2031x1755 2450x2031x1755Net weight Kg 575 650 840 895 1100
MODEL 4502 6004 7004 8004 9004
Nominal cooling capacity kW 118.0 143.1 166.6 198.9 236.2Nominal cooling capacity R.T. 33.6 40.7 47.4 56.6 67.2Power input – cooling kW 50.3 62.0 69.4 81.8 100.6Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 2 3 4 4 4Water flow l/s 5.6 6.8 8.0 9.5 11.3Water load loss kPa 38 57 56 55 58Dimensions (length x width x height) mm 2450x2031x1805 2250x2177x1826 3744x2250x1826 3744x2250x1826 3744x2250x1826Net weight Kg 1250 1560 1920 2400 2700
Robustness and simplicity at the service of air-conditioning
WA
TE
R C
HILLE
R U
NITS
64
D02
EWXBZ TECHNICAL SPECIFICATIONS
MODEL 801 1001 1201 1501 1602Nominal cooling capacity kW 20.2 25.0 29.8 34.6 40.4Nominal cooling capacity R.T. 5.7 7.1 8.5 9.8 11.5Nominal heating capacity kW 22.0 27.0 32.0 37.0 43.0Power input – cooling kW 8.2 10.6 14.2 15.5 16.3Heating power input kW 8.0 10.2 12.9 15.0 16.0Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 1 1/2 1 1/2 1 1/2 2 2Water flow l/s 1.0 1.2 1.4 1.7 1.9Water load loss kPa 36 36 35 36 36Dimensions (length x width x height) mm 1520x1019x1455 1520x1019x1455 1520x1019x1455 1520x1019x1805 1864x1307x1455Net weight Kg 240 340 360 385 545
MODEL 2002 2402 3002 3502 4002Nominal cooling capacity kW 50.0 59.8 70.9 82.5 98.5Nominal cooling capacity R.T. 14.2 17.0 20.2 23.5 28.0Nominal heating capacity kW 53.0 63.0 84.3 96.0 114.7Power input – cooling kW 21.2 28.4 31.0 34.7 40.9Heating power input kW 20.3 26.0 30.1 34.0 40.0Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 2 2 2 2 2Water flow l/s 2.4 2.9 3.4 3.9 4.7Water load loss kPa 39 38 40 38 37Dimensions (length x width x height) mm 1864x1307x1455 2174x1407x1505 2174x1407x1805 2450x2031x1755 2450x2031x1755Net weight Kg 575 650 840 860 1200
MODEL 4502 6004 7004 8004 9004Nominal cooling capacity kW 117.1 141.8 165.0 197.0 234.2Nominal cooling capacity R.T. 33.3 40.3 46.9 56.0 66.6Nominal heating capacity kW 138.2 168.6 192.0 229.4 276.4Power input – cooling kW 50.3 62.0 69.4 81.8 100.6Heating power input kW 49.4 60.2 64.0 80.0 98.8Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 2 3 4 4 4Water flow l/s 5.6 6.8 7.9 9.4 11.2Water load loss kPa 38 57 55 54 57Dimensions (length x width x height) mm 2450x2031x1805 2250x2177x1826 3744x2250x1826 3744x2250x1826 3744x2250x1826Net weight Kg 1350 1600 1720 2400 2700
ENERGY SAVINGCompressor soft-startHead pressure controlby frequency converter
SOUND LEVELCompressor sound jacketLow sound level outdoor fan
UNIT INSTALLATIONMagnetothermics in electrical panelPower supply at 60Hzand voltages 230, 208, etc.Upgraded motorsAnti-freeze resistanceoperation in collection tray
Outdoor reading pressure gaugesMulti-tube evaporatoroption on requestOutdoor inertia module, MWIBuilt-in hydronic kit. Built-in hydronic kitwith double pumpAnti-corrosion pre-treated coilsDischarge temperature under 7ºCDifferential pressure switchPrepared for disassembly
MAINTENANCEService valvesExternal Schrader valves for pressure test
REGULATION AND CONTROLPrepared for HydrofanMicrochiller remote controlAlarm indicationON/OFF remoteSeparate electrical panelOption of master-slave operation Operation for redundant machineCentralised integrated management operation
Operation without neutralScheduling function and Modbus connection, etc. consultThermostat chapter
Versions for other climates Versions for other power supplies
OPTIONS AVAILABLE
As well as these options, consult our Commercial Departmentfor any other configuration not described as available.
0 701 801 1001 1201 1501
EWCZ/EWCBZ · · · ·
EWXZ/EWXBZ · · · · ·
EWWZ · · · ·
EWSZ · · · ·
MODEL 150
Total power input kW 0.8
Total input current A 1.3
Power supply (50 Hz ~) V 400.3+N
Water tank L 150
Expansion vessel L 18
Dimensions mm 1070x753x1267
Net weight Kg 170
MODEL 150
MWI Inertia module
WA
TE
R C
HIL
LER
UN
ITS
65
D02AXIAL FANS
Built-in units for air-conditioning solutions. Flexibility and reliability combined
MAIN FEATURES
• Cooling capacities ranging from 45.3 to 136.0 kW
• A refrigerated circuit with scroll compressors in tandem
• High energy efficiency
• Standard supplied MCX control
• Head pressure control in cooling and evaporation in pump by stages
• Differential pressure switch
• ON/OFF remote
• Remote winter/summer
• Scheduling function
The EWXA/EWXBA chiller units are compact units designed for outdoor installation on flat roofs, terraces or on the ground.
WATER CHILLER UNITS
KRONO XACooling only
KRONO XBAHeat pump
EWXA/EWXBA TECHNICAL SPECIFICATIONS
MODEL 1601.2 2001.2 2401.2 2501.2 3001.2
Nominal cooling capacity kW 45.3 52.6 61.5 67.8 77.3Nominal cooling capacity R.T. 12.9 14.9 17.5 19.3 22.0Nominal heating capacity kW 53.1 62.0 73.8 79.3 84.9
EER kW/kW 2.8 2.8 2.8 2.8 3.0
COP kW/kW 3.3 3.3 3.4 3.2 3.1Power supply (50 Hz ~) (1) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+NWater connections Ø (") 2 2 2 2 2Water flow m3/h 7.8 9.0 10.6 11.7 13.3Water load loss kPa 22 24 26 26 32Dimensions (length x width x height) mm 2450x1220x1640 2450x1220x1640 2450x1220x1640 2860x1220x1630 2860x1220x1630Net weight Kg 730 740 770 870 880
MODEL 3201.2 3501.2 4001.2 4501.2 5001.2
Nominal cooling capacity kW 81.3 94.9 112.5 125.1 136.0Nominal cooling capacity R.T. 23.1 27.0 32.0 35.6 38.7Nominal heating capacity kW 88.6 103.4 123.0 136.0 146.3
EER kW/kW 2.8 2.8 2.8 2.9 3.0
COP kW/kW 2.9 3.0 3.2 3.2 3.3Power supply (50 Hz ~) V 400.3+N 400.3+N 400.3+N 400.3+N 400.3+NWater connections Ø (") 2 2 2 2 2Water flow m3/h 14.0 16.3 19.4 21.5 23.4Water load loss kPa 30 35 41 43 46Dimensions (length x width x height) mm 2860x1220x1630 3400x1220x1640 3400x1220x1640 3400x1220x1640 3400x1220x1640Net weight Kg 900 1040 1120 1200 1250
Data referring to operating conditions according to EUROVENT(1) Other voltages and frequencies available for power supply
WA
TE
R C
HILLE
R U
NITS
66
D03
1 2 3 T.ININ
T.OUT
OUT
1 2 3 4
5
6 T.ININLET
T.OUT
OUTLET
ENERGY SAVING
Compressor soft-start
Partial heat recoverer (DHW)
EC fans
Head pressure control by frequency converter or voltage converter
SOUND LEVEL
Compressor sound jacket
Silent
Super-silent
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Upgraded fans
Upgraded pumps
Built-in inertia module (with tank, etc.)
Built-in hydronic kit.(without tank)
Built-in pump
Double or twin pumpAnti-freeze heater for condenser in tray
Anti-corrosion pre-treated coils
Prepared for disassembly
Multi-tube evaporator option – on request (only without hydronic kit)
Protective grille in outdoor exchangers
Victaulic outdoor connections
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Refrigerant pressure gauges
Water pressure gauges
Water filter
REGULATION AND CONTROL
Second setpoint
Alarm indication
Separate electrical panel
Option of master-slave operation
Operation without neutral
Modbus connection, etc. consult Thermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
HYDRAULIC DIAGRAMS EWXA/EWXBA. Standard diagram
HYDRAULIC DIAGRAMS EWXA/EWXBA. 1 pump hydronic kit (without tank)
COMPONENTS
1. Plate heat exchanger2. Purge valve3. Water filter (optional)
COMPONENTS
1. Plate heat exchanger2. Purge valve3. Water pump4. Shut-off valve5. Expansion vessel6. Water filter (optional)
WA
TE
R C
HIL
LER
UN
ITS
67
D03
6
1 2 3 4 5
7INLET
T.IN
T.OUT
OUTLET
12
2
3 8
3
49
11
10
4
5
7
6
T.ININLET
T.OUT
OUTLET
1 2 38
9
10
7
6
T.ININLET
T.OUT
OUTLET
HYDRAULIC DIAGRAMS EWXA/EWXBA. 2 pump hydronic kit (without tank)
COMPONENTS
1. Plate heat exchanger2. Purge valve3. Check valve4. Water pump5. Shut-off valve6. Expansion vessel7. Water filter (optional)
HYDRAULIC DIAGRAMS EWXA/EWXBA. Inertial module 1 pump (with tank)
COMPONENTS
1. Plate heat exchanger2. Check valve3. Water pump4. Shut-off valve5. Purge valve6. Water tank7. Expansion vessel8. Safety valve9. Pressure gauge10. Emptying valve11. Water filter (optional)
HYDRAULIC DIAGRAMS EWXA/EWXBA. Inertial module 1 pump (with tank)
COMPONENTS
1. Plate heat exchanger2. Water pump3. Shut-off valve4. Purge valve5. Water tank6. Expansion vessel7. Safety valve8. Pressure gauge9. Emptying valve10. Water filter (optional)
WA
TE
R C
HILLE
R U
NITS
68
EWFV/EWFVB 360.4-600.4EWFV/EWFVB 140.4-300.4
D04 AXIAL FANS
Solutions in water for medium power. CLIMATE and INDUSTRY applications
EWFV cooling only / EWFVB heat pump TECHNICAL SPECIFICATIONS
MODEL 150.4 170.4 200.4
Nominal cooling capacity (1) kW 150.1 174.0 197.6Nominal cooling capacity (1) R.T. 42.7 49.5 56.2
Power input kW 50.2 59.4 65.5
EER kW/kW 2.69 2.67 2.78ESEER kW/kW 3.63 3.62 3.75Nominal heating capacity (1) kW 169.0 199.2 234.9Power input kW 51.3 60.6 69.8COP kW/kW 3.3 3.3 3.4Power supply (50 Hz ~) (2) V 400.3 400.3 400.3Water flow l/s 7.2 8.3 9.4Water load loss kPa 36.1 47.5 49.1Water connection (inlet/outlet) Ø (") 2 1/2 2 1/2 2 1/2Dimensions (length x width x height) mm 3300x1100x2300 4300x1100x2300 4300x1100x2300Net weight Kg 1473 1663 1806
ADVANCE XACooling only
ADVANCE XBAHeat pump
• Cooling capacities ranging from 130 to 600 kW
• R410A refrigerant
• 2 separate circuits with scroll compressors in tandem or trio by circuit
• Standard encapsulated compressors
• 4 versions available Super-silent (SS) High Seasonal Energy Efficiency (AEE) High Ambient Temperatures (ATA) High Pressure Fans (APV)
• Energy class C
MAIN FEATURESThe EWFV/EWFVB chiller units are high performance units offering multiple configuration options. • Standard electronic valv
• Standard differential pressure switch
• Single or double pump with 2 versions: standard or high pressure
• Partial or total recoverer
• Condensation control by steps in standard version or proportional in other versions
• Optimised design that allows the incorporation of options in units already installed
WATER CHILLER UNITS
(1) Data of the reversible version (heat pump) (2) Without neutral
WA
TE
R C
HIL
LER
UN
ITS
69
D04
ENERGY SAVINGLow condensation control for temperatures Total heat recovery (only cooling model) or partial recovery (20%)Compressor soft-startPower factor correctionInverter fans in versions AEE and APV
SOUND LEVELStandard silent versionoptional super-silent versionAcoustic insulation water pump
UNIT INSTALLATIONBuilt-in hydronic kitwith 1 or 2 pumps
Built-in inertia tankAnti-freeze electric coils inside the inertia tankInlet/outlet valve kitDouble setpointWater filterPre-treated coils for corrosive environmentsCoil protection grilleLow temperature kit (-18ºC)Anti-vibration support for assembly of the unitMulti-tube exchanger
MAINTENANCEHigh and low pressure gauges
REGULATION AND CONTROLIntegration with BMS applications (Modbus, BacNet, EtherNet)Flow switchRemote control panelRemote control keypadMaster-slave control(up to 4 units)
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
EWFV cooling only / EWFVB heat pump TECHNICAL SPECIFICATIONSMODEL 360.4 400.4 470.6 540.6 600.6
Nominal cooling capacity (1) kW 360.2 401.7 472.2 537.0 601.9Nominal cooling capacity (1) R.T. 102.4 114.2 134.3 152.7 171.1Power input kW 119.0 134.0 156.0 178.5 201.0EER kW/kW 3.03 3.00 3.03 3.01 2.99ESEER kW/kW 3.90 3.80 3.89 3.80 3.80
Nominal heating capacity (1) kW 418.1 467.6 545.7 623.9 702.0Power input kW/kW 116.0 130.0 151.8 173.4 195.0COP kW/kW 3.6 3.6 3.6 3.6 3.6Power supply (50 Hz ~) (2) V 400.3 400.3 400.3 400.3 400.3Water flow l/s 18.2 20.2 23.7 26.9 30.3Water load loss kPa 50.4 50.3 55 70.6 76.4Water connection (inlet/outlet) Ø (") 4 4 4 4 4Dimensions (length x width x height) mm 4000x2200x2550 4000x2200x2550 5000x2200x2550 6000x2200x2550 6000x2200x2550Net weight Kg 2732 3018 3723 4083 4169
EWFV cooling only / EWFVB heat pump TECHNICAL SPECIFICATIONS
MODEL 230.4 250.4 270.4 300.4
Nominal cooling capacity (1) kW 226.7 246.8 273.9 300.5Nominal cooling capacity (1) R.T. 64.5 70.2 77.9 85.4
Power input kW 74.2 78.4 91.3 105.7
EER kW/kW 2.77 2.87 2.77 2.65ESEER kW/kW 3.75 3.88 3.75 3.59Nominal heating capacity (1) kW 254.1 272.5 300.8 335.8Power input kW 71.4 79.3 91.3 103.4COP kW/kW 3.6 3.4 3.3 3.3Power supply (50 Hz ~) (2) V 400.3 400.3 400.3 400.3Water flow l/s 10.8 11.8 13.1 14.4Water load loss kPa 22.6 26.8 33.0 39.7Water connection (inlet/outlet) Ø (") 3 3 3 3Dimensions (length x width x height) mm 4300x1100x2300 4300x1100x2300 4300x1100x2300 4300x1100x2300Net weight Kg 1955 2100 2190 2200
Complete hydraulic circuit with hydronic kit with double pump and inertia tank. For simpler versions, consult the commercial department.
HYDRAULIC DIAGRAM EWFV/EWFVB
COMPONENTS1. Plate heat exchanger2. Pump3. Drainage valve4. Inertia tank5. Water filter6. Check valve7. Expansion vessel8. Drainage/pressure connection9. Water outlet10. Water inlet11. Damper valve12. Flexible connection13. Bypass valve
REGULATION AND CONTROLA. Water inlet temperature sensorB. Water outlet temperature sensorC. Water differential pressure switchD. Air purgerE. Safety valveFS. Flow switch.... Inside the unitO. Sensors
WA
TE
R C
HILLE
R U
NITS
70
D05 AXIAL FANS
Chiller units with screw compressor. Maximum adaptability to the demand
ADVANCE XATCooling only
EWFD cooling only TECHNICAL SPECIFICATIONS
MODEL 300.2 330.2 370.2 410.2 410.2Nominal cooling capacity (1) kW 293.0 326.2 365.6 410.6 455.5
Nominal cooling capacity (1) R.T. 83.3 92.7 104.0 116.7 129.5
Power input (2) kW 95.8 111.8 126.2 150.4 159.6
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3
EER kW/kW 3.10 2.90 2.90 2.70 2.90Sound level at 10 m dB (A) 64 64 65 66 66Water connection (IN/OUT) Diam. (") 5 5 5 5 6Dimensions (length x width x height) mm 4000x2200x2550 4000x2200x2550 4000x2200x2550 4000x2200x2550 4000x2200x2550Net weight Kg 3529 3547 3629 4068 4587
MODEL 480.2 510.2 550.2 620.2 660.2Nominal cooling capacity (1) kW 480.5 513.6 546.8 620.3 660.0
Nominal cooling capacity (1) R.T. 136.6 146.0 155.5 176.4 187.7
Power input (2) kW 175.6 189.6 203.6 207.4 215.1
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3
EER kW/kW 2.70 2.70 2.70 3.00 3.10Sound level at 10 m dB (A) 66 66 66 68 68Water connection (IN/OUT) Diam. (") 6 6 6 6 8Dimensions (length x width x height) mm 4000x2200x2550 4000x2200x2550 4000x2200x2550 6000x2200x2550 6000x2200x2550Net weight Kg 4587 4609 4627 6229 6607
(1) Data calculated at outlet water temperature 7ºC and ambient air temperature 35ºC(2) Only compressor consumption
MAIN FEATURES
• Cooling capacities ranging from 300 to 550 kW
• R134A refrigerant
• 2 independent circuits with 1 screw compressor per circuit
• 4 versions availableSilent (SI)Super-silent (SS)High Efficiency (AE) High Pressure Fan (APV)
• Standard encapsulated compressors
• Multi-tube evaporator
• Double setpoint
• Screw compressor, maximum partialisation
The EWFD chiller units are high performance units offering multiple configuration options.
WATER CHILLER UNITS
WA
TE
R C
HIL
LER
UN
ITS
71
D05
ENERGY SAVINGLow condensation control for temperatures Total heat recoveryCompressor soft-startPower factor correctionInverter fans in versions AE and APV
SOUND LEVELStandard silent versionoptional super-silent version
UNIT INSTALLATIONBuilt-in or remote hydronic kitHydronic kit with or without inertia tank
Single or double pump, lowor high pressure Coil and machine protective grillesWater filterCoils with pre-treatment for corrosive environments (black epoxy, copper-copper, etc.)Anti-vibration support for assembly of the unitPhase fault controlElectronic expansion valveFlow switchCompressor intake valvesCompressor liquid injection valves
MAINTENANCEHigh and low pressure gauges
REGULATION AND CONTROLIntegration with BMS applications (Modbus, BacNet, EtherNet)Remote control panelRemote control keypadMaster-slave control (up to 4 units)
Versions for other climates Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
MODEL 720.2 760.2 820.2 910.2 960.2Nominal cooling capacity (1) kW 718.6 758.8 823.3 908.8 962.4
Nominal cooling capacity (1) R.T. 204.3 215.8 234.1 258.4 273.6
Power input (2) kW 234.6 254.1 289.5 292.7 312.9
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3
EER kW/kW 3.10 3.00 2.80 3.10 3.10Sound level at 10 m dB (A) 68 68 68 68 68Water connection (IN/OUT) Diam. (") 8 8 8 8 8Dimensions (length x width x height) mm 6000x2200x2550 6000x2200x2550 6000x2200x2550 8000x2200x2550 8000x2200x2550Net weight Kg 6767 6920 7036 8349 8791
MODEL 1030.2 1100.2 1170.2 1240.2 1320.2Nominal cooling capacity (1) kW 1027.2 1093.6 1167.1 1240.6 1320.0
Nominal cooling capacity (1) R.T. 292.1 310.9 331.8 352.7 375.3
Power input (2) kW 355.8 382.2 385.3 388.4 430.2
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3
EER kW/kW 2.90 2.90 3.00 3.20 3.10Sound level at 10 m dB (A) 69 69 69 70 70Water connection (IN/OUT) Diam. (") 6 6 6 6 8Dimensions (length x width x height) mm 8000x2200x2550 8000x2200x2550 10000x2200x2550 12000x2200x2550 12000x2200x2550Net weight Kg 9218 9254 10856 12449 13205
MODEL 1440.2 1520.2 1650.2Nominal cooling capacity (1) kW 1437.2 1517.6 1646.6
Nominal cooling capacity (1) R.T. 408.6 431.5 468.2
Power input (2) kW 469.2 508.2 579.0
Power supply (50 Hz~) V 400.3 400.3 400.3
EER kW/kW 3.10 3.00 2.80Sound level at 10 m dB (A) 70 70 70Water connection (IN/OUT) Diam. (") 8 8 8Dimensions (length x width x height) mm 12000x2200x2550 12000x2200x2550 12000x2200x2550Net weight Kg 13534 13831 14072
EWFD cooling only TECHNICAL SPECIFICATIONS
Complete hydraulic circuit with hydronic kit with double pump and inertia tank. For simpler versions, consult the commercial department.
HYDRAULIC DIAGRAM EWFD
COMPONENTS1. Plate heat exchanger2. Pump3. Drainage valve4. Inertia tank5. Water filter6. Check valve7. Expansion vessel8. Drainage/pressure connection9. Water outlet10. Water inlet11. Damper valve12. Flexible connection13. Bypass valve
REGULATION AND CONTROLA. Water inlet temperature sensorB. Water inlet temperature sensorC. Water differential pressure switchD. Air purgerE. Safety valveFS. Flow switch.... Inside the unitO. Sensors
WA
TE
R C
HILLE
R U
NITS
72
D06
701, 3002 3502
CENTRIFUGAL FANS
KRONO CZCooling only
KRONO CBZHeat pump
WATER CHILLER UNITS
Chillers units with centrifugal fan: solutions for space problems
• Cooling capacities ranging from 15.9 to 78.5 kW • Independent cooling circuits • Scroll Compressors• Thermostats and controls supplied as standard
for electromechanical regulation units Microchiller2 (all models)
MAIN FEATURES
The EWCZ/EWCBZ chiller units are compact air-to-water units especially designed for indoor installation.For application in health centres, hotels, offices, industrial process units, hospitals, etc.
EWCZ TECHNICAL SPECIFICATIONS
MODEL 701 801 1001 1201 1602
Nominal cooling capacity kW 16.2 19.8 24.5 30.3 39.6Nominal cooling capacity R.T. 4.6 5.6 7.0 8.6 11.3Power input – cooling kW 5.4 6.3 8.2 9.5 13.0Power supply (50 Hz ~) V 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 1 1/2 1 1/2 1 1/2 1 1/2 2Water flow l/s 0.8 0.9 1.2 1.4 1.9Water load loss kPa 40 45 40 35 45Airflow m3/h 7000 7800 11000 12500 16000air static pressure Pa 70 95 50 50 90Dimensions (length x width x height) mm 1130x800x1250 1130x800x1250 1700x870x1250 1700x870x1250 2000x939x1250Net weight Kg 277 282 376 416 567
MODEL 2002 2402 3002 3502
Nominal cooling capacity kW 49.0 60.6 71.2 80.4Nominal cooling capacity R.T. 13.9 17.2 20.2 22.9Power input – cooling kW 16.7 19.4 22.3 25.8Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 400.3+NWater connections Ø (") 2 2 2 2Water flow l/s 2.3 2.9 3.4 3.8Water load loss kPa 40 35 30 30Airflow m3/h 18000 18500 27000 32000air static pressure Pa 60 78 140 160Dimensions (length x width x height) mm 2150x980x1362 2150x980x1362 2800x1050x1722 2800x1050x1722Net weight Kg 651 687 1038 1120
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
HITECSA recommends the installation of an anti-freeze heater in the water collection tray for ambient temperatures of less than 5°C.
WA
TE
R C
HIL
LER
UN
ITS
73
D06
EWCBZ TECHNICAL SPECIFICATIONS
MODEL 701 801 1001 1201 1602
Nominal cooling capacity kW 15.9 19.4 24.0 29.7 38.9Nominal cooling capacity R.T. 4.5 5.5 6.8 8.4 11.1Nominal heating capacity kW 17.4 21.3 26.4 32.6 42.5Power input – cooling kW 5.5 7.4 9.8 12.3 14.7Heating power input kW 5.0 5.8 7.5 8.8 11.7Power supply (50 Hz ~) V 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+NWater connections Ø (") 1 1/2 1 1/2 1 1/2 1 1/2 2Water flow l/s 0.8 0.9 1.1 1.4 1.9Water load loss kPa 40.0 45.0 40.0 35.0 45.0Airflow m3/h 7000 7800 11000 12500 16000air static pressure Pa 70 95 50 50 90Dimensions (length x width x height) mm 1130x800x1250 1130x800x1250 1700x870x1250 1700x870x1250 2000x939x1250Net weight Kg 277 282 376 416 567
MODEL 2002 2402 3002 3502
Nominal cooling capacity kW 48.0 59.4 69.8 78.5Nominal cooling capacity R.T. 13.6 16.9 19.8 22.3Nominal heating capacity kW 52.8 65.2 76.0 85.2Power input – cooling kW 19.6 24.4 26.1 30.3Heating power input kW 14.8 17.7 20.2 22.0Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 400.3+NWater connections Ø (") 2 2 2 2Water flow l/s 2.3 2.8 3.3 3.8Water load loss kPa 40 35 30 30Airflow m3/h 22000 23000 27000 32000air static pressure Pa 120 135 140 160Dimensions (length x width x height) mm 2600x980x1422 2600x980x1422 2800x1050x1722 2800x1050x1722Net weight Kg 807 863 1038 1120
ENERGY SAVING
Compressor soft-start(depending on models)
Fan soft-start(depending on models)
Condensation control for low outdoor
temperatures by frequency converter
SOUND LEVEL
Double thermo-acoustic insulation
Compressor sound jacket
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hzand voltages 230, 208, etc.
Outdoor installation kit
Upgraded motors
Anti-freeze resistanceoperation in collection tray
Fireproof filter class M0
Thermo-acoustic insulation class M0
Base guides
Anti-corrosion pre-treated coils
Prepared for disassembly
Outdoor reading pressure gauges
Multi-tube evaporatoroption on request
Outdoor inertia module, MWI
Discharge water temperatureunder 7ºC
Differential pressure switch
Vertical condenser air outlet
MAINTENANCE
Service valvesExternal Schrader valves for pressure test
Condenser filter
REGULATION AND CONTROL
Prepared for Hydrofan
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Option of master-slave operation
Operation for redundant machine
Centralised integrated management operation
Operation without neutral
Scheduling function and Modbus connection, etc. consultThermostat chapter
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
HITECSA recommends the installation of an anti-freeze heater in the water collection tray for ambient temperatures of less than 5°C.
Inertia modules for these units, consult commercial department
WA
TE
R C
HILLE
R U
NITS
74
D07 WATER-TO-WATER SCROLL COMPRESSOR
ADVANCE WCooling only/Heat pump
MAIN FEATURESThe EWWF/EWWFB chiller unit range are units specially designed for indoor installation.
MODEL 50.2 60.2 80.2 90.2 120.2 150.2
Nominal cooling capacity (1) kW 51.1 61.3 77.6 91.4 118.8 147.5
Nominal cooling capacity (1) R.T. 14.5 17.4 22.1 26.0 33.8 41.9
Power input kW 11.9 13.6 17.3 20.8 26.6 33.0
EER kW/ kW 4.52 4.68 4.67 4.55 4.62 4.62
ESSER kW/ kW 6.450 6.62 6.11 6.59 6.24 5.95
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3
Water connections (IN/OUT) (3) Ø (") 2" 1/2 2" 1/2 2" 1/2 2" 1/2 2" 1/2 2" 1/2
Dimensions (length x width x height) mm 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500
Net weight Kg 433 481 528 577 818 942
MODEL 20.1 25.1 30.1 35.1 40.1 45.1
Nominal cooling capacity (1) kW 21.3 26.4 31.3 35.1 39.5 46.9
Nominal cooling capacity (1) R.T. 6.1 7.5 8.9 10.0 11.2 13.3
Power input kW 4.4 5.5 6.4 7.2 8.2 9.7
EER kW/ kW 4.81 4.82 4.86 4.90 4.84 4.86
ESSER kW/ kW 5.44 5.43 5.41 5.38 5.21 5.44
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3
Water connections (IN/OUT) (3) Ø (") 1" 1/2 1" 1/2 1" 1/2 1" 1/2 1" 1/2 1" 1/2
Dimensions (length x width x height) mm 821x455x1350 821x455x1350 821x455x1350 821x455x1350 821x455x1350 821x455x1350
Net weight Kg 156 176 174 179 185 203
EWWF cooling only TECHNICAL SPECIFICATIONS
• Cooling capacities ranging from 20 to 380 kW
• Scroll Compressors
• R410A refrigerant
• B energy rating
• Wide range of hydraulic kits
• Heat recovery
• DHW function
• Victaulic connections inside the unit
• The condenser and evaporator are welded plate exchangers
• 2 versionsSuper-silent (SS)Remote Condenser (CR)
• Standard liquid visor
• Standard differential pressure switch
Water/water units: high performance in reduced format
WATER CHILLER UNITS
WA
TE
R C
HIL
LER
UN
ITS
75
D07
MODEL 270.4 290.4 340.4 390.4Nominal cooling capacity (1) kW 266.4 296.0 338.7 379.9Nominal cooling capacity (1) R.T. 75.7 84.2 96.3 108.0Power input kW 57.9 64.1 73.4 81.6EER kW/ kW 4.6 4.6 4.6 4.7ESSER kW/ kW 6.21 5.92 6.10 6.05Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 4" 4" 4" 4"Dimensions (length x width x height) mm 2250x855x1850 2250x855x1850 2250x855x1850 2250x855x1850Net weight Kg 1369 1466 1552 1644
MODEL 170.2 200.2 210.4 240.4Nominal cooling capacity (1) kW 170.5 193.3 209.6 233.4Nominal cooling capacity (1) R.T. 48.5 55.0 59.6 66.4Power input kW 37.7 42.8 45.8 51.2EER kW/ kW 4.67 4.67 4.58 4.56ESSER kW/ kW 6.05 6.04 6.62 6.00Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 2" 1/2 2" 1/2 2" 1/2 2" 1/2Dimensions (length x width x height) mm 1210x850x1500 1210x850x1500 2250x855x1850 2250x855x1850Net weight Kg 1013 1113 1213 1382
(1) Eurovent cooling mode conditions: Evaporator: water inlet 12ºC, water outlet 7ºC. Condenser: water inlet 30ºC, water outlet 35ºC.(3) Victaulic type connections.
EWWF cooling only TECHNICAL SPECIFICATIONS
MODEL 20.1 25.1 30.1 35.1 40.1 45.1Nominal cooling capacity (1) kW 20.9 26.1 30.3 34.2 38.4 45.8Nominal cooling capacity (1) R.T. 5.9 7.4 8.6 9.7 10.9 13.0Power input kW 4.5 5.5 6.5 7.3 8.3 9.8EER 4.65 4.73 4.65 4.67 4.65 4.65ESSER 5.16 5.37 5.26 5.26 5.05 5.19Nominal heating capacity (2) kW 23.7 28.9 33.6 38.5 42.9 51.2Power input kW 5.7 6.9 8.1 9.2 10.3 12.2
COP 4.19 4.19 4.17 4.18 4.17 4.20
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 1" 1/2 1" 1/2 1" 1/2 1" 1/2 1" 1/2 1" 1/2Dimensions (length x width x height) mm 821x455x1350 821x455x1350 821x455x1350 821x455x1350 821x455x1350 821x455x1350
Net weight Kg 159 181 179 184 190 208
MODEL 50.2 60.2 80.2 90.2 120.2 150.2Nominal cooling capacity (1) kW 50.2 59.2 76.4 89.0 115.3 144.8Nominal cooling capacity (1) R.T. 14.3 16.8 21.7 25.3 32.8 41.2Power input kW 12.0 13.9 17.4 21.1 27.0 33.3EER 4.40 4.45 4.57 4.38 4.43 4.51ESSER 6.200 6.23 5.99 6.20 5.85 5.76Nominal heating capacity (2) kW 57.4 67.9 86.0 101.8 131.6 163.7Power input kW 13.7 16.5 20.3 24.3 31.3 38.5COP 4.190 4.12 4.24 4.19 4.20 4.25Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 2" 1/2 2" 1/2 2" 1/2 2" 1/2 2" 1/2 2" 1/2Dimensions (length x width x height) mm 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500 1210x850x1500Net weight Kg 441 489 539 588 831 959
EWWFB (heat pump) TECHNICAL SPECIFICATIONS
MODEL 170.2 200.2 210.4 240.4Nominal cooling capacity (1) kW 166.3 186.1 205.2 226.2Nominal cooling capacity (1) R.T. 47.3 52.9 58.3 64.3Power input kW 38.2 43.4 46.6 52.3EER 4.52 4.44 4.40 4.33ESSER 5.96 5.66 6.50 5.92Nominal heating capacity (2) kW 189.5 211.6 231.0 255.5Power input kW 44.8 50.1 56.2 63.2COP 4.23 4.22 4.11 4.04Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 2" 1/2 2" 1/2 2" 1/2 2" 1/2Dimensions (length x width x height) mm 1210x850x1500 1210x850x1500 2250x855x1850 2250x855x1850Net weight Kg 1031 1130 1244 1414
(1) Eurovent cooling mode conditions: Evaporator: water inlet 12ºC, water outlet 7ºC. Condenser: water inlet 30ºC, water outlet 35ºC. (2) Eurovent heating mode conditions: Evaporator: water inlet 10ºC, water outlet 7ºC. Condenser: water inlet 40ºC, water outlet 45ºC. (3) Victaulic type connections.
WA
TE
R C
HILLE
R U
NITS
76
D07
ENERGY SAVINGCondensation controlCompressor soft-startCondensers for correction of the power factorElectronic expansion valveHeat recovery
SOUND LEVELCompressor sound jacket
UNIT INSTALLATIONBuilt-in hydronic kit with1 or 2 pumps Electric heater
Temperature sensor for DHW tankInlet/outlet valvePressostatic valve for well waterOutdoor air temperature sensor for outdoor condition compensationDifferential pressure switch3-way valve for DHW productionWater filterAnti-vibration supports for unit assembly
MAINTENANCEPressure gauge kit
REGULATION AND CONTROLModbus communicationON/OFF remote controlRemote panelSequencer for installations up to 4 unitsFlow switch
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
(1) Eurovent cooling mode conditions: Evaporator: water inlet 12ºC, water outlet 7ºC. Condenser: water inlet 30ºC, water outlet 35ºC. (2) Eurovent heating mode conditions: Evaporator: water inlet 10ºC, water outlet 7ºC. Condenser: water inlet 40ºC, water outlet 45ºC. (3) Victaulic type connections.
EWWFB (heat pump) TECHNICAL SPECIFICATIONS
MODEL 270.4 290.4 340.4 390.4Nominal cooling capacity (1) kW 263.7 292.0 332.6 371.2Nominal cooling capacity (1) R.T. 75.0 83.0 94.6 105.5Power input kW 58.5 65.0 74.7 83.6EER 4.51 4.49 4.45 4.44ESSER 6.10 5.84 6.02 5.95Nominal heating capacity (2) kW 294.9 330.1 375.8 417.6Power input kW 71.20 79.40 90.70 101.20COP 4.14 4.16 4.14 4.13Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3Water connections (IN/OUT) (3) Ø (") 4" 4" 4" 4"Dimensions (length x width x height) mm 2250x855x1850 2250x855x1850 2250x855x1850 2250x855x1850Net weight Kg 1405 1513 1597 1688
Complete hydraulic circuit with hydronic kit with double pump and inertia tank. For simpler versions, consult the commercial department.
HYDRAULIC DIAGRAMS EWWF/EWWFB
REGULATION AND CONTROLA. Differential pressure switchB. Water inlet temperature sensorC. Water inlet temperature sensorD. Air purgerE. ThermometerF. Safety valve.... Inside the unitO. Sensors
COMPONENTS1C. Outdoor exchanger1E. Indoor exchanger2. Pump3. Water filter4. Expansion vessel5. Water outlet6. Water inlet7. Damper valve8. Flexible connection9. Bypass valve10. Check valve11. Drainage/pressure connection
WA
TE
R C
HIL
LER
UN
ITS
77
D08WATER TO WATER SCREW COMPRESSOR
ADVANCE WTCooling only
• Cooling capacities ranging from 300 to 1,100 kW
• R134A refrigerant
• 2 independent circuits with 1 screw compressor per circuit
• 3 versions availableSilent (SI)Super-silent (SS)Remote Condenser (CR)
MAIN FEATURES
The EWWFD chiller unit range is made up of high performance units. They are ideal for installations in continuous use or with high thermal demands.
MODEL 270.2 360.2 440.2 530.2 560.2 600.2
Nominal cooling capacity (1) kW 271.8 362.4 440.0 529.3 564.7 600.0
Nominal cooling capacity (1) R.T. 77.3 103.0 125.1 150.5 160.6 170.6
Power input (2) kW 68.0 82.1 102.0 121.0 129.0 138.0
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3
ESEER kW/kW 4.00 4.41 4.28 4.36 4.35 4.34
Evaporator
Water flow l/s 13.0 17.3 21.0 25.3 27.0 28.7
Pressure drop kPa 44.4 54.4 53.7 42.2 40.5 45.7
Water connection (IN/OUT) Ø (") 5 6 6 6 6 6
Condenser
Water flow l/s 8.0 10.5 12.7 15.3 16.4 17.4
Pressure drop kPa 28.7 38.7 41.0 40.1 45.7 41.6
Water connection (IN/OUT) Ø (") 2" 1/2 3 3 3 3 3
Sound level at 1 m dB (A) 70 70 71 71 71 71
Dimensions (length x width x height) mm 3795x950x1910 3795x950x1910 4210x1400x2050 4210x1400x2050 4210x1400x2050 4210x1400x2050
Net weight Kg 2067 2554 3005 3377 3470 3498
EWWFD cooling only TECHNICAL SPECIFICATIONS
Water/water units with screw compressor. Robustness and performance for the installations
WATER CHILLER UNITS
(1) Data calculated at water temperature in evaporator 12/7ºC and water temperature in condenser 30/35ºC.
WA
TE
R C
HILLE
R U
NITS
78
D08
ENERGY SAVING
Compressor soft-start
Power factor correction
Electronic expansion valve
UNIT INSTALLATION
Water filter
Anti-vibration support for assembly of the unit
Phase fault control
Electronic expansion valve
Water flow switch
Compressor intake valves
Compressor liquid injection valves
Compress oil flow control
MAINTENANCE
High and low pressure gauges
REGULATION AND CONTROL
Integration with BMS applications
ON/OFF remote control
Remote control panel
Sequencer up to 4 units GSM
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
(1) Data calculated at water temperature in evaporator 12/7ºC and water temperature in condenser 30/35ºC.
MODEL 640.2 680.2 720.2 780.2 840.2 900.2
Nominal cooling capacity (1) kW 639.2 678.4 716.0 784.4 841.7 898.9
Nominal cooling capacity (1) R.T. 181.7 192.9 203.6 223.0 239.3 255.6
Power input (2) kW 145.0 153.0 168.0 182.0 194.0 206.0
Power supply (50 Hz ~) V 400.3 400.3 400.3 400.3 400.3 400.3
ESEER kW/ kW 4.38 4.41 4.25 4.29 4.32 4.36
Evaporator
Water flow l/s 30.5 32.4 34.2 37.5 40.2 42.9
Pressure drop kPa 56.3 63.4 70.6 52.8 60.8 65.7
Water connection (IN/OUT) Ø (") 6 6 6 8 8 8
Condenser
Water flow l/s 18.5 19.6 20.8 22.8 24.4 26.0
Pressure drop kPa 47.0 50.2 50.5 60.5 29.0 33.0
Water connection (IN/OUT) Ø (") 3 3 3 3 4 4
Sound level at 1 m dB (A) 71 71 71 72 72 73
Dimensions (length x width x height) mm 4210x1400x2050 4210x1400x2050 4210x1400x2050 4770x1400x2050 4770x1400x2050 4770x1400x2050
Net weight Kg 3592 3605 4029 4952 4970 4986
MODEL 960.2 1020.2 1120.2
Nominal cooling capacity (1) kW 962.1 1040.2 1118.2
Nominal cooling capacity (1) R.T. 273.6 295.8 317.9
Power input (2) kW 218.7 230.5 242.3
Power supply (50 Hz ~) V 400.3 400.3 400.3
ESEER kW/ kW 4.40 4.51 4.61
Evaporator
Water flow l/s 46.0 49.7 53.4
Pressure drop kPa 75.3 88.0 101.7
Water connection (IN/OUT) Ø (") 8 8 8
Condenser
Water flow l/s 28.2 30.4 32.5
Pressure drop kPa 38.7 41.7 47.9
Water connection (IN/OUT) Ø (") 4 4 4
Sound level at 1 m dB (A) 74 74 74
Dimensions (length x width x height) mm 4770x1400x2050 4770x1400x2050 4770x1400x2050
Net weight Kg 5112 5165 5342
EWWFD cooling only TECHNICAL SPECIFICATIONS
WA
TE
R C
HIL
LER
UN
ITS
79
EFCW/FCCW, 2T and 4T vertical and horizontal fan coil with and without housing Page 80
FKW and FKWS, 4-way 2T and 4T cassette fan coil Page 84
FPW, wall mounted fan coil Page 86
BSW, fan coil installation high pressure ducts available Page 87
BHW, ductable fan-coil Page 90
EHW, horizontal air conditioning units Page 92
CLW, indoor units for connection to vertical ducts Page 94
EHWM, air handling units Page 96
FAN COILSAND AHUS
80
E01 CENTRIFUGAL FAN COIL
• Cooling capacities ranging from 0.9 to 11 kW
• Can be combined with all the KRONO and ADVANCE chilling unit range
• Horizontal or vertical configuration
• Version with or without housing
• 4 installation versions: FCW 3R: without housing with 2 tubesFCCW 3R: with housing with 2 tubesFCW 3R+1: without housing with 4 tubesFCCW 3R+1: with housing with 4 tubes
• Different air discharge or intake options:FCCW: vertical V versionFCCW: horizontal H versionFCW: vertical V versionFCW: horizontal H version
MAIN FEATURES
The FCW-FCCW fan coil is a terminal with a centrifuge fan. It is characterised by its modern design and can be installed in any environment.
Water terminal units for the hotel and tertiary sector
WATER TERMINAL UNITS
FCWWithout housing
FCCWWith housing
MODEL 10 15 20 25 30 40
Water cooling capacity kW 0.9 1.3 2.2 2.5 3.1 3.5
Water cooling capacity R.T. 0.2 0.4 0.6 0.7 0.9 1.0
Water heating capacity 50ºC kW 1.3 1.9 2.6 3.3 3.7 4.5
Water heating capacity 70/60ºC kW 2.2 3.2 4.4 5.5 6.2 7.5
Power input W 30 30 40 50 60 80
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 230.1
Airflow (1) m3/h 227 289 404 453 575 685
Water flow l/h 148 220 373 435 535 662
Water connections Ø (") 3/4 3/4 3/4 3/4 3/4 3/4
Sound pressure (2) db(A) 37 36 35 38 38 43
Weight Kg 15.6 18.9 23.7 23.9 27.7 27.9
Dimensions (length x height x width) (2) mm 480x660x225 480x860x225 480x1060x225 480x1060x225 480x1260x225 480x1260x225
FCW 3R / FCCW 3R (2 tubes) TECHNICAL SPECIFICATIONS
FAN
CO
ILS
AN
D A
HU
S
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS
81
E01
ENERGY SAVING
DC brushless motor
UNIT INSTALLATION
Motor powered at 60 Pa
2-tube model 3-way valve
2-tube model shut-off
and regulation valve
4-tube model 3-way valve
4-tube model shut-off and regulation valve
Auxiliary condensation tray
Support baseboard
REGULATION AND CONTROL
Electronic thermostat
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
FCW 3R+1 / FCCW 3R+1 (4 tubes) TECHNICAL SPECIFICATIONS
(1) available static pressure 0 Pa(2) Considered 8.6 dB(A) lower with regard to the sound level of a 90 m3 premises with a reverberation time of 0.5 sec.
Data calculated at maximum speed
(1) Available static pressure 0 Pa(2) Considered 8.6 dB(A) lower with regard to the sound level of a 90 m3 premises with a reverberation time of 0.5 sec.
Data calculated at maximum speed
FCW 3R / FCCW 3R (2 tubes) TECHNICAL SPECIFICATIONS
MODEL 50 60 70 80 100 110
Water cooling capacity kW 4.1 5.6 6.9 8.0 10.0 11.0
Water cooling capacity R.T. 1.2 1.6 2.0 2.3 2.8 3.1
Water heating capacity 50ºC kW 5.1 6.7 8.1 10.1 13.1 13.3
Water heating capacity 70/60ºC kW 8.6 11.3 13.7 16.9 22.0 23.8
Power input W 70 160 180 213 277 273
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 230.1
Airflow (1) m3/h 708 1,058 1,242 1,356 2,012 2,003
Water flow l/h 745 961 1,187 1,376 1,727 1,898
Water connections Ø (") 3/4 3/4 3/4 3/4 3/4 3/4
Sound pressure (2) db(A) 43 49 55 54 58 57
Weight Kg 32.7 38.0 38.5 50.0 58.5 59.0
Dimensions (length x height x width) (2) mm 585x1260x225 585x1460x225 585x1460x225 602x1660x257 602x1960x257 602x1960x257
MODEL 10 15 20 25 30 40
Water cooling capacity kW 0.8 1.2 20.8 2.4 2.8 3.7
Water cooling capacity R.T. 0.2 0.3 5.9 0.7 0.8 1.0
Water heating capacity 70/60ºC kW 1.3 1.9 2.7 2.9 3.5 4.1
Power input W 30 30 40 56 60 80
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 230.1
Airflow (1) m3/h 216 275 384 430 546 651
Water flow l/h 144 212 358 409 509 635
Water connections Ø (") 3/4 3/4 3/4 3/4 3/4 3/4
Sound pressure (2) db(A) 36 38 35 38 37 44
Weight Kg 15.6 18.9 23.7 23.9 27.7 27.9
Dimensions (length x height x width) (2) mm 480x660x225 480x860x225 480x1060x225 480x1060x225 480x1260x225 480x1260x225
MODEL 50 60 70 80 100 110
Water cooling capacity kW 4.5 2.4 6.6 7.7 9.7 10.7
Water cooling capacity R.T. 1.3 0.7 1.9 2.2 2.8 3.0
Water heating capacity 70/60ºC kW 5.0 6.2 7.7 8.4 10.1 11.4
Power input W 78 160 180 182 273 273
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1 230.1 230.1
Airflow (1) m3/h 673 1,005 1,180 1,291 1,916 1,908
Water flow l/h 769 920 1,130 1,330 1,673 1,837
Water connections Ø (") 3/4 3/4 3/4 3/4 3/4 3/4
Sound pressure (2) db(A) 44 50 56 54 58 58
Weight Kg 32.7 38.0 38.5 50.0 58.5 59.0
Dimensions (length x height x width) (2) mm 585x1260x225 585x1460x225 585x1460x225 602x1660x257 602x1960x257 602x1960x257
FAN
CO
ILS A
ND
AH
US
82
E01 OPTIONS AVAILABLE
FAN
CO
ILS
AN
D A
HU
S
Discharge plenum for unitswithout housing
Adjustable discharge air grille for units with housing
Fan coil support set Auxiliary condensation tray
90° discharge plenum for units without housing
Return air plenum for units without housing
Extension for straight and 90° plenums for units without housing
Tubular discharge plenum for units without housing
Tubular return air plenum with filter for units without housing
Painted lower panel without grillefor units with housing
Painted lower panel with filter and grille for units with housing
Condensate pump Painted ceiling panel + 90º return air and discharge plenum for units without housing
Electric heaters Including safety thermostat
For models kW
FCW 2 1
FCW 3 and 4 1
FCW 5 – 7 2
FCW 8 and 9 3
FCW 10 0.6
FCW 11 and 12 4
FTW 1 and 2 1
FTW 3 1
FTW 4 2
FTW 6 3
83
E01OPTIONS AVAILABLE
COMPONENTS
A. Valve + actuatorB. Connection elbowsC. Shut-off/ regulation valve
IMPORTANT NOTE:
Elbow connections are not supplied with the valves. Please order separately.
For models DESCRIPTION Ø “
FCW 1-6 and FTW 10-60 2 tube-3-way system 1/2
FCW 1-6 and FTW 10-60 2-tube-3-way, 3-point floating system 1/2
FCW 1-6 and FTW 10-60 2-tube-3-way, 0-10 V modulating system 1/2
FCW 1-6 and FTW 10-60 4 tube-3-way system 1/2 – 1/2
FCW 1-6 and FTW 10-60 4-tube-3-way, 3-point floating system 1/2 – 1/2
FCW 1-6 and FTW 10-60 4-tube-3-way, 0-10 V modulating system 1/2 – 1/2
FCW 1-6 and FTW 10-60 2 tube-2-way system 1/2
FCW 1-6 and FTW 10-60 2-tube-3-way, 3-point floating system 1/2
FCW 1-6 and FTW 10-60 2-tube-3-way, 0-10 V modulating system 1/2
FCW 1-6 and FTW 10-60 4 tube-2-way system 1/2 – 1/2
FCW 1-6 and FTW 10-60 4-tube-3-way, 3-point floating system 1/2 – 1/2
FCW 1-6 and FTW 10-60 4-tube-3-way, 0-10 V modulating system 1/2 – 1/2
FCW 1-6 and FTW 10-60 Shut-off/flow regulation valve. 2 tube system. 1/2
FCW 1-6 and FTW 10-60 Shut-off/flow regulation valve. 4 tube system. 1/2 – 1/2
FCW 1-6 and FTW 10-60 2 shut-off valves. 2 tube system. 1/2
FCW 1-6 and FTW 10-60 2 shut-off valves. 4 tube system. 1/2 – 1/2
FCW 1-6 and FTW 10-60 Elbow connections 2 tube system. -
FCW 1-6 and FTW 10-60 Elbow connections 4 tube system. -
FCW 70-90 2 tube-3-way system 3/4
FCW 70-90 2-tube-3-way, 3-point floating system 3/4
FCW 70-90 2-tube-3-way, 0-10 V modulating system 3/4
FCW 70-90 4 tube-3-way system 3/4 – 3/4
FCW 70-90 4-tube-3-way, 3-point floating system 3/4 – 3/4
FCW 70-90 4-tube-3-way, 0-10 V modulating system 3/4 – 3/4
FCW 70-90 2 tube-2-way system 3/4
FCW 70-90 2-tube-2-way, 3-point floating system 3/4
FCW 70-90 2-tube-2-way, 0-10 V modulating system 3/4
FCW 70-90 4 tube-2-way system 3/4 – 3/4
FCW 70-90 4-tube-2-way, 3-point floating system 3/4 – 3/4
FCW 70-90 4-tube-2-way, 0-10 V modulating system 3/4 – 3/4
FCW 70-90 Shut-off/flow regulation valve. 2 tube system. 3/4
FCW 70-90 Shut-off/flow regulation valve. 4 tube system. 3/4 – 3/4
FCW 70-90 2 shut-off valves. 2 tube system. 3/4
FCW 70-90 2 shut-off valves. 4 tube system. 3/4 – 3/4
FCW 70-90 Elbow connections 2 tube system. -
FCW 70-90 Elbow connections 4 tube system. -
For models DESCRIPTION Ø “
FCW 100-120 2 tube-3-way system 1
FCW 100-120 2-tube-3-way, 3-point floating system 1
FCW 100-120 2-tube-3-way, 0-10 V modulating system 1 – 3/4
FCW 100-120 4 tube-3-way system 1 – 3/4
FCW 100-120 4-tube-3-way, 3-point floating system 1 – 3/4
FCW 100-120 4-tube-3-way, 0-10 V modulating system 1
FCW 100-120 2 tube-2-way system 1
FCW 100-120 2-tube-2-way, 3-point floating system 1
FCW 100-120 2-tube-2-way, 0-10 V modulating system 1 – 3/4
FCW 100-120 4 tube-2-way system 1 – 3/4
FCW 100-120 4-tube-2-way, 3-point floating system 1 – 3/4
FCW 100-120 4-tube-2-way, 0-10 V modulating system 1
FCW 100-120 Shut-off/flow regulation valve. 2 tube system. 1 – 3/4
FCW 100-120 Shut-off/flow regulation valve. 4 tube system. 1
FCW 100-120 2 shut-off valves. 2 tube system. 1 – 3/4
FCW 100-120 2 shut-off valves. 4 tube system. -
FCW 100-120 Elbow connections 2 tube system. -
FCW 100-120 Elbow connections 4 tube system. -
OTHER ACCESSORIES
Outdoor air damperRear closing panel for units with housingDischarge grilles for units with housingOther accessories: consult commercial department
FAN
CO
ILS A
ND
AH
US
84
E02
Without infrared controller
With infrared controller
FAN
CO
ILS
AN
D A
HU
S
FAN COIL CASSETTE
• Cooling capacities ranging from 2.4 to 7.6 kW
• EUROVENT certification
• 2 versions:FKW (with its own infrared controller)FKWS (without controller and ready for installation
with a wall mounted controller)
• 2 measurements: 580x580 and 835x835 mm
• Extractable filter. Easy maintenance
• Valves not installed. Supplied separately.
• Condensate drainage pump incorporated
• Connection tubes supplied separately.
MAIN FEATURES
The fan coil cassette is a terminal to treat the air of an envir-on ment, either in the winter or in the summer Especially designed with the standard measurements of installations in false ceilings.
Units can be integrated into technical ceiling for tertiary sectorFKW
FKWS
FKW Model with control FKWS Model without control. Installation with 2 tubes. TECHNICAL SPECIFICATIONS
MODEL 21 22 23 24
Water cooling capacity 7/12ºC kW 2.4 2.8 3.3 4.5
Water cooling capacity 7/12ºC R.T. 0.7 0.8 0.9 1.3
Water heating capacity 50ºC kW 3.4 3.8 4.5 5.3
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Standard coil water connections Ø (") 3/4 3/4 3/4 3/4
Sound pressure (1) db(A) 50 50 53 55
Weight Kg 23.5 24.5 24.5 24.5
Dimensions (length x height x width) mm 580x580x280+23 580x580x280+23 580x580x280+23 580x580x280+23
MODEL 31 32 33 34
Water cooling capacity 7/12ºC kW 5.6 6.4 7.1 7.6
Water cooling capacity 7/12ºC R.T. 1.6 1.8 2.0 2.2
Water heating capacity 50ºC kW 7.3 7.3 8.0 8.3
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Standard coil water connections Ø (") 3/4 1 1 1
Sound pressure (1) db(A) 47 49 52 52
Weight Kg 37 43 43 45
Dimensions (length x height x width) mm 835x835x240+60 835x835x305+60 835x835x305+60 835x835x305+60
WATER TERMINAL UNITS
85
E02
FAN
CO
ILS A
ND
AH
US
FKW Model with control FKWS Model without control. Installation with 4 tubes. TECHNICAL SPECIFICATIONS
MODEL 41 42 43 44
Water cooling capacity 7/12ºC kW 1.9 2.8 3.5 4.4
Water cooling capacity 7/12ºC R.T. 0.5 0.8 1.0 1.3
Water heating capacity 60/70ºC kW 1.9 2.8 3.5 4.4
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Standard coil water connections Ø (") 3/4 3/4 3/4 3/4
Auxiliary coil water connections Ø (") 1/2 1/2 1/2 1/2
Sound pressure (1) db(A) 50 50 53 55
Weight Kg 23.5 24.5 24.5 24.5
Dimensions (length x height x width) mm 580x580x280+23 580x580x280+23 580x580x280+23 580x580x280+23
MODEL 51 52 53 54
Water cooling capacity 7/12ºC kW 4.3 5.0 5.5 6.1
Water cooling capacity 7/12ºC R.T. 1.2 1.4 1.5 1.7
Water heating capacity 70/60ºC kW 5.9 6.6 7.3 8.6
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Standard coil water connections Ø (") 3/4 1 1 1
Auxiliary coil water connections Ø (") 1/2 3/4 3/4 3/4
Sound pressure (1) db(A) 47 49 52 52
Weight Kg 37 43 43 45
Dimensions (length x height x width) mm 835x835x240+60 835x835x305+60 835x835x305+60 835x835x305+60
UNIT INSTALLATION
2-tube model 3-way valve
2-tube model shut-off and regulation valve
Elbow connections for 2-tube installation
4-tube model 3-way valve
4-tube model shut-off and regulation valve
Elbow connections for 4-tube installation
REGULATION AND CONTROL
Wall mounted electronic thermostat
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
(1) Considered 8.6 dB(A) lower with regard to the sound level of a 90 m3 premises with a reverberation time of 0.5 sec. Data calculated at maximum speed
86
E03
FAN
CO
ILS
AN
D A
HU
S
Solutions for small demands difficult to locate
FPW
FPW TECHNICAL SPECIFICATIONS
MODEL 20 25 35 40
Cooling capacity (1) kW 2.0 2.4 3.3 4.0
Cooling capacity (1) R.T. 0.6 0.7 0.9 1.1
Heating capacity (2) kW 2.6 3.0 4.4 4.9
Heating capacity (3) kW 4.4 5.0 7.5 8.3
Power input W 29 29 48 51
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Water flow l/h 336 409 573 686
Water connections Ø (") 1/2 1/2 1/2 1/2
Sound pressure (4) db(A) 45 45 45 48
Dimensions (length x height x width) mm 880x298x205 990x305x210 1172x360x220 1172x360x220
Weight Kg 11.5 12.4 19 20.5
(1) Water inlet 7ºC, water outlet 12ºC. Air temperature 27ºC dry bulb, 19ºC wet bulb(2) Water inlet 50ºC. Air temperature 20ºC(3) Water inlet 60/70ºC. Air temperature 20ºC(4) Considered 8.6 dB(A) lower with regard to the sound level of a 90 m3 premises with a reverberation time of 0.5 sec.Data calculated at maximum speedavailable static pressure 0 Pa
MAIN FEATURES
• Cooling capacities ranging from 1.5 to 4.0 kW
• Easy maintenance
• Valves integrated in the unit
• 4 versions:FPW (with its own infrared controller)FPWS (without controller and ready for installation
with a wall mounted controller)FPW+V3 (with infrared controller and with a 3-way
valve)FPWS+V3 (without controller and with a 3-way valve)
The fan coil wall mounted units is a terminal to treat the air of an environment, in both the winter and the summer. It offers an attractive design and excellent comfort with a minimum noise level.
WALL MOUNTED FAN COIL
WATER TERMINAL UNITS
87
E04
FAN
CO
ILS A
ND
AH
US
FAN COIL HIGH PRESSURE
WATER TERMINAL UNITS
• Cooling capacities ranging from 3.6 to 50.6 kW
• High pressure available: from 105 Pa
• Standard model without filter. EU3 filter optional
• 2 versions: BSW H (horizontal installation) and BSW V (vertical installation)
• Easy maintenance
MAIN FEATURES
Ducted fan coil units are designed with a low profile, making them ideal for installation in false ceilings.
Flexible and adaptable applications for water installations.
BSWHigh pressure
BSW H/BSW V (2 tubes) TECHNICAL SPECIFICATIONS
MODEL 10 20 30 40
Cooling capacity (1) kW 3.8 7.1 9.2 10.6
Cooling capacity (1) R.T. 2.8 5.7 8.5 11.4
Heating capacity (2) kW 5.0 8.6 11.3 12.9
Maximum power input W 155 195 325 355
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Airflow m3/h 895 1423 1951 2131
Available pressure Pa 105 105 135 135
Water flow l/h 606.5 1092.2 1489.1 1684.3
Water connections Ø (") 1/2 1/2 3/4 3/4
Sound pressure (3) db(A) 59.4 57.4 61.4 60.4
Dimensions (length x height x width) H mm 650x300x533 1000x300x533 1100x325x533 1340x325x533
Dimensions (length x height x width) V mm 738x330x603 1088x330x603 1188x355x623 1428x355x623
Weight Kg 28 36 41 46
MODEL 50 60 70
Cooling capacity (1) kW 13.1 27.8 50.6
Cooling capacity (1) R.T. 3.7 7.9 14.4
Heating capacity (2) kW 17.0 32.9 60.9
Maximum power input W 525 1300 2400
Power supply (50 Hz ~) V 230.1 230.1 230.1
Airflow m3/h 3002 4678 9250
Available pressure Pa 205 260 260
Water flow l/h 1945.0 4234.6 7802.1
Water connections Ø (") 1 1 1/4 1 1/2
Sound pressure (3) db(A) 66.4 69.4 72.4
Dimensions (length x height x width) mm 1340x375x533 1341x675x853 2028x675x853
Dimensions (length x height x width) V mm 1428x405x723 1481x703x1294 2168x703x1294
Weight Kg 57 117 192
(1) Water inlet 7ºC, water outlet 12ºC. Air temperature 27ºC dry bulb, 19ºC wet bulb(2) Water inlet 50ºC. Air temperature 20ºC(3) Considered 8.6 dB(A) lower with regard to the sound level of a 90 m3 premises with a reverberation time of 0.5 sec.Data calculated at maximum speed
88
E04
AIR QUALITY
Air filter
UNIT INSTALLATION
2-tube model 3-way valve
2-tube model shut-off and regulation valve
Elbow connections for 2-tube installation
4-tube model 3-way valve
4-tube model shut-offand regulation valve
Elbow connections for 4-tube installation
Hot water heating coil
Electric heater
Condensation tray
REGULATION AND CONTROL
Wall mounted electronic thermostat
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
BSW H/BSW V (4 tubes) TECHNICAL SPECIFICATIONS
MODEL 10 20 30 40
Cooling capacity (1) kW 3.6 7.0 9.0 9.6
Cooling capacity (1) R.T. 1.0 2.0 2.6 2.7
Heating capacity (2) kW 4.2 7.0 9.2 10.6
Maximum power input W 155 195 325 355
Power supply (50 Hz ~) V 230.1 230.1 230.1 230.1
Airflow m3/h 795 1353 1850 2025
Available pressure Pa 95 90 120 120
Water flow l/h 606.5 1092.2 1489.1 1684.3
Water connections Ø (") 1/2 1/2 3/4 3/4
Sound pressure (3) db(A) 60.4 57.4 61.4 61.4
Dimensions (length x height x width) H mm 650x300x533 1000x300x533 1100x325x533 1340x325x533
Dimensions (length x height x width) V mm 738x330x603 1088x330x603 1188x355x623 1428x355x623
Weight Kg 28 36 41 46
MODEL 50 60 70
Cooling capacity (1) kW 13.6 24.9 45.5
Cooling capacity (1) R.T. 3.9 7.1 12.9
Heating capacity (2) kW 12.7 38.8 70.2
Maximum power input W 525 1300 2400
Power supply (50 Hz ~) V 230.1 230.1 230.1
Airflow m3/h 3036 4445 8788
Available pressure Pa 180 220 220
Water flow l/h 1945.0 4234.6 7802.1
Water connections Ø (") 1 1 1/4 1 1/2
Sound pressure (3) db(A) 64.4 69.4 72.4
Dimensions (length x height x width) H mm 1340x375x533 1341x675x853 2028x675x853
Dimensions (length x height x width) V mm 1428x405x723 1481x703x1294 2168x703x1294
Weight Kg 57 117 192
FAN
CO
ILS
AN
D A
HU
S
(1) Water inlet 7ºC, water outlet 12ºC. Air temperature 27ºC dry bulb, 19ºC wet bulb(2) Water inlet 60/70ºC. Air temperature 20ºC
89
E04OPTIONS AVAILABLE
OTHER OPTIONAL ACCESSORIES
Coils 4rCoils 5rCoils 6rAir renewal dampersDischarge plenumReturn plenum
Valves, 2 and 4 tube installationsVALVE MODEL BSW 10 Ø (“) BSW 20 Ø (“) BSW 30 A 50 Ø (“) BSW 60 Ø (“) BSW 70 Ø (“)
2 tube system – 3 way 1/2 3/4 1 1 1/2 2
2 tube system – 3-way, 3-point floating 1/2 3/4 1 1 1/2 2
2 tube system – 3-way, 0-10 V modulating 1/2 3/4 1 1 1/2 2
4 tube system – 3 way 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
4 tube system – 3-way, 3-point floating 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
4 tube system – 3-way, 0-10 V modulating 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
2 tube system – 2 way 1/2 3/4 1 1 1/2 2
2 tube system – 2-way, 3-point floating 1/2 3/4 1 1 1/2 2
2 tube system – 2-way, 0-10 V modulating 1/2 3/4 1 1 1/2 2
4 tube system – 2 way 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
4 tube system – 2-way, 3-point floating 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
4 tube system – 2-way, 0-10 V modulating 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
Shut-off/flow regulation valve. 2 tube system. 1/2 3/4 1 1 1/2 2
Shut-off/flow regulation valve. 4 tube system. 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
2 shut-off valves. 2 tube system. 1/2 3/4 1 1 1/2 2
2 shut-off valves. 4 tube system. 1/2 – 1/2 3/4 – 1/2 1 – 3/4 1 1/2 – 1 1/2 2 – 1 1/2
Connection pipe for 2 tube system - - - - -
Connection pipe for 4 tube system - - - - -
FAN
CO
ILS A
ND
AH
US
COMPONENTS
A. Valve + actuatorB. Connection pipeC. Shut-off/ regulation valve
IMPORTANT NOTE:
Elbow connections are not supplied with the valves. Please order separately.
Auxiliary condensation tray Air filter Condensate pump.
Auxiliary hot water coils1r for 4t systems
Electric heaters
For models kWBSW 10 3BSW 10 4.5BSW 20 6BSW 20 6BSW 30 9BSW 30 9BSW 40 9BSW 40 9BSW 50 12BSW 50 12BSW 60 12BSW 60 18BSW 70 18BSW 70 24
For models kW
BSW 10 4.2
BSW 20 7
BSW 30 9.2
BSW 40 10.5
BSW 50 14
BSW 60 38.8
BSW 70 70.2
90
E05 DUCTABLE AIR CONDITIONING UNITS
• Cooling capacities ranging from 4.5 to 25 kW
• Easy maintenance
• Maximum adaptability to the needs of the installation
MAIN FEATURES
Ductable air conditioning units designed in low profile type fan coil units are equipped with an exchanger comprising copper tubes and aluminium fins. Centrifuge fans driven by three-speed motors.
BHW
Flexible and adaptable applications for water installations.
FAN
CO
ILS
AN
D A
HU
S
AIR CONDITIONING UNITS
MODEL 174 205 358 410
Water temperature cooling capacity 7ºC Speed I-II-III (kW) 3.1 – 4.1 – 4.5 4.4 – 5.0 – 5.3 6.0 – 5.9 – 8.9 7.9 – 9.1 – 10.8
Water temperature heating capacity 50ºC Speed I-II-III (kW) 4.5 – 5.8 – 6.3 6.4 – 7.1 – 7.5 8.6 – 9.7-11.9 11.1 – 12.6 – 14.9
Water temperature heating capacity 70ºC Speed I-II-III (kW) 7.6 – 9.8 – 10.7 10.8 – 12.1- 12.7 14.6 – 16.5 – 20.1 18.8 – 21.4 – 25.2
Total power input kW 0.2 0.3 0.5 0.6
Voltage (50 Hz~) V 230.1 230.1 230.1 230.1
Water flow speed I-II-III l/h 530 – 690 – 760 760 – 850 – 895 1030 – 1180 – 1440 1360 – 1560 – 1850
Airflow speed I-II-III m3/h 600 – 900 – 1050 950 – 1130 – 1220 1100 – 1340 – 1850 1400 – 1700 – 2200
Available pressure speed I-II-III mmca 2 – 2.5 – 3 2.5 – 3 – 4 6 – 7 – 8 6 – 7.5 – 8
Water connection Ø (") 3/4 3/4 3/4 3/4
Dimensions (width x length x height) mm 829x791x219 829x791x258 915x791x285 915x791x315
Net weight Kg 30 34 44 45
MODEL 515 720 724
Water temperature cooling capacity 7ºC Speed I-II-III (kW) 12.2 – 13.9 – 15.3 20.2 25.0
Water temperature heating capacity 50ºC Speed I-II-III (kW) 16.1 – 18.2 – 19.7 26.5 32.7
Water temperature heating capacity 70ºC Speed I-II-III (kW) 27.2 – 30.8 – 33.5 44.8 55.5
Total power input kW 0.6 0.8 1.6
Voltage (50 Hz~) V 230.1 230.1 230.1
Water flow speed I-II-III l/h 2090-2360-2565 3365 4190
Airflow speed I-II-III m3/h 2200-2600-2900 3850 5200
Available pressure speed I-II-III mmca 3 – 4 – 5.5 5 5
Water connection Ø (") 1 1 1/4 1 1/4
Dimensions (width x length x height) mm 1200x826x352 1350x900x412 1350x900x412
Net weight Kg 62 80 80
BHW TECHNICAL SPECIFICATIONS
91
E05
AIR QUALITYGravimetric filter in return G4
SOUND LEVELDouble thermo-acoustic insulation
UNIT INSTALLATIONPower supply at 60Hzand voltages 230, 208, etc.
Panel with fan contact, therm. relay and circuit breaker
Upgraded motors (depending on models)
Connections opposite side
Grille discharge plenum
Tubular discharge plenum(depending on models)
Thermo-acoustic insulation class M0
Fireproof filter class M0
Hot water heating coil
Additional coil foroperating with 4 tubes
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Filter with bottom outlet
Insertable filter
Main switch
Prepared for assemblyin vertical
MAINTENANCEClogged filter indication
Split filter
REGULATION AND CONTROL
Control for Hydrofan
Alarm indication
Smoke detection
ON/OFF remote
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
FAN
CO
ILS A
ND
AH
US
92
E06 HORIZONTAL
• Cooling capacities ranging from 18 to 110 kW
• Airflows up to 18,000 m3/h
• Can be integrated in Hydrofan system
• Option of assembly outdoors
MAIN FEATURES
The EHW series are units designed to complement and optimise air-conditioning using hydronic systems. They are equipped with a heat exchanger made of copper tubes and aluminium fins and centrifugal fans driven by motors using pulleys.
MODEL 518 725 830 1036 1042 1250
Water temp. cooling capacity 7ºC kW 18.0 25.0 30.0 36.0 42.0 50.0
Water temp. cooling capacity 50ºC kW 26.7 36.0 32.9 50.0 57.7 69.9
Water temp. cooling capacity 85ºC kW 59.3 79.2 94.2 110.0 127.0 145.0
Water temp. cooling capacity 7ºC R.T. 5.1 7.1 8.5 10.2 11.9 14.2
Water temp. cooling capacity 50ºC R.T. 7.6 10.2 9.4 14.2 16.4 19.9
Water temp. cooling capacity 85ºC R.T. 16.9 22.5 26.8 31.3 36.1 41.2
Total power input kW 0.6 0.8 1.1 0.8 1.1 1.5
Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3
Water flow l/s 2978 4637 5381 6028 6841 7753
Airflow m3/h 3500 4200 5200 5500 6500 8200
Available pressure mmca 8.0 10.5 7.4 10.8 8.0 7.0
Water connections Ø (") 1 1/4 1 1/2 1 1/2 2 2 2
Dimensions (length x width x height) mm 1085x750x580 1130x900x650 1130x900x650 1700x870x650 1700x870x650 1700x870x650
Net weight Kg 108 150 150 214 214 217
EHW TECHNICAL SPECIFICATIONS
EHW
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
FAN
CO
ILS
AN
D A
HU
S
AIR CONDITIONING UNITS
Flexible and adaptable applications for water installations.
93
E06
ENERGY SAVING
Option of mixing module for free cooling with two or three dampers
EC radial ventilation
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc.
Outdoor installation kit
Upgraded motors
Fireproof filter class M0
Thermo-acoustic insulation class M0
Connections opposite side
Base guides
Horizontal evap. air discharge
Hot water heating coil
Heating coils for use in 4 tube system
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
MAINTENANCE
Clogged filter indication
Split filter
REGULATION AND CONTROL
Control for Hydrofan
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
MODEL 1657 2069 2476 3097 35110
Water temp. cooling capacity 7ºC kW 57.0 69.0 76.0 97.0 110.0
Water temp. cooling capacity 50ºC kW 82.8 100.0 110.0 132.0 155.0
Water temp. cooling capacity 85ºC kW 183.0 220.0 241.0 290.0 342.0
Water temp. cooling capacity 7ºC R.T. 16.2 19.6 21.6 27.6 31.3
Water temp. cooling capacity 50ºC R.T. 23.5 28.4 31.3 37.5 44.1
Water temp. cooling capacity 85ºC R.T. 52.0 62.6 68.5 82.5 97.2
Total power input kW 2.2 3.0 3.0 4.0 4.0
Power supply (50 Hz ~) V 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N 230.3 or 400.3+N
Water flow l/s 9676 11776 12829 15534 17575
Airflow m3/h 9500 11200 12500 14800 18000
Available pressure mmca 11.3 14.5 15.0 18.0 20.5
Water connections Ø (") 2 2 2 2 1/2 2 1/2
Dimensions (length x width x height) mm 2000x937x747 2600x980x752 2600x980x752 2800x1050x915 2800x1050x915
Net weight Kg 291 356 356 452 558
EHW TECHNICAL SPECIFICATIONS
FAN
CO
ILS A
ND
AH
US
94
E07
• Cooling capacities ranging from 7.6 to 47.6 kW
• Airflows up to 8,200 m3/h
• Can be integrated in Hydrofan system
• Option of assembly outdoors
MAIN FEATURES
The CLW series units are designed to complement and optimise air-conditioning using hydronic systems. They are equipped with a heat exchanger comprising copper tubes and aluminium fins and centrifuge fans with pressure available.
CLW
INDOOR UNITS FOR CONNECTIONTO VERTICAL DUCTS
POSSIBLE AIR SUPPLY / RETURN CONFIGURATIONS standard optional
CLW TECHNICAL SPECIFICATIONS
MODEL 270 412 515 720 824
Water temp. cooling capacity 7ºC kW 7.6 14.0 15.6 18.6 22.4Water temp. heating capacity 50ºC kW 11.7 20.7 23.5 27.9 29.2Water temp. heating capacity 85ºC kW 25.8 45.6 51.8 61.4 64.0Water temp. cooling capacity 7ºC R.T. 2.2 4.0 4.4 5.3 6.4Water temp. heating capacity 50ºC R.T. 3.3 5.9 6.7 7.9 8.3Water temp. heating capacity 85ºC R.T. 7.3 13.0 14.7 17.5 18.2Total power input kW 0.3 0.5 0.6 0.8 0.4Power supply (50 Hz ~) V 230.1 230.1 – 400.3+N 230.3 – 400.3+N 230.3 – 400.3+N 230.3 – 400.3+NWater flow l/h 1,314 2,411 2,684 3,193 3,859Airflow m3/h 1,900 2,801 3,500 4,200 3,500Available pressure Pa 100 50 150 135 100Water connections Ø (") 3/4 1 1 1 1/4 1 1/2Dimensions (length x width x height) mm 697x500x1000 697x500x1000 757x500x1100 1152x600x1200 1152x600x1200Net weight Kg 45 71 94 115 151
AIR CONDITIONING UNITS
FAN
CO
ILS
AN
D A
HU
S
Flexible and adaptable applications for water installations
95
E07
CLW TECHNICAL SPECIFICATIONS
ENERGY SAVING
Option of mixing box with servo
Fan soft-start
EC radial ventilation
AIR QUALITY
Gravimetric filter in return G4
Opacimetric filter in return class F6 to F9 (combinable with a G4 or Fx+Fy)
SOUND LEVEL
Double thermo-acoustic insulation
UNIT INSTALLATION
Magnetothermics in electrical panel
Power supply at 60Hz and voltages 230, 208, etc. (depending on models)
Outdoor installation kit
Upgraded motors
Fireproof filter class M0
Thermo-acoustic insulation class M0
Connections opposite side
Base guides
Horizontal evap. air discharge
Hot water heating coils
Heating coils for use in 4 tube system
Electric resistance coils for auxiliary electric heating
Anti-corrosion pre-treated coils
Prepared for disassembly
Intake grille
MAINTENANCE
Clogged filter indication
Split filter
REGULATION AND CONTROL
Control for Hydrofan
Alarm indication
Smoke detection
ON/OFF remote
Separate electrical panel
Versions for other climates Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
MODEL 830 1036 1042 1250
Water temp. cooling capacity 7ºC kW 29.5 36.7 41.0 47.6Water temp. heating capacity 50ºC kW 40.1 48.6 55.7 66.9Water temp. heating capacity 85ºC kW 88.0 107.0 122.0 147.0Water temp. cooling capacity 7ºC R.T. 8.4 10.4 11.7 13.5Water temp. heating capacity 50ºC R.T. 11.4 13.8 15.8 19.0Water temp. heating capacity 85ºC R.T. 2.1 3.7 4.2 5.0Total power input kW 1.1 0.8 1.1 1.5Power supply (50 Hz ~) V 230.3 – 400.3+N 230.3 – 400.3+N 230.3 – 400.3+N 230.3 – 400.3+NWater flow l/h 5,079 6,313 7,052 8,191Airflow m3/h 5,200 5,500 6,500 8,200Available pressure Pa 100 85 75 85Water connections Ø (") 1 1/2 2 2 2Dimensions (length x width x height) mm 1152x600x1200 1700x600x1300 1700x600x1300 1700x600x1300Net weight Kg 151 171 171 182
FAN
CO
ILS A
ND
AH
US
96
E08
AIR HANDLING UNITS
• Airflows ranging from 1000 to 100,000 m3/h
• Modular design
• Indoor or outdoor installation
• Manufactured in aluminium profiles and sandwich panels with several thickness possibilities and insulation
• Multiple configuration possibilities and accessories
• Unit manufactured according to the UNE-EN 1886 standard, regarding thermal and mechanical characteristics of the structure
MAIN FEATURES
The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, filtering, humidity management, etc.) They have been designed to offer maximum flexibility in the selection, design and installation.
EHWM
ENERGY SAVING
Crossed flow static recoverer
Rotary recoverer
Inverter fans
Mixing module
AIR QUALITY
Type F and absolute G4 filters,with bag, rigid, etc.
Air quality control
UNIT INSTALLATION
Electric heater
Hot water heating coil
Cold water cooling coil
Expansion coils
Humidification system
Plug-fan fans
Anti-vibration supports
Condensation tray
MAINTENANCE
Inspection door
Safety microswitch on inspectiondoor
Versions for other climates
Versions for other power supplies
As well as these options consult our Commercial Department for any other configuration or function not described as available.
OPTIONS AVAILABLE
EHWM CLASSIFICATION ACCORDING TO STANDARD UNE-EN 1886
CHARACTERISTICS CLASS
Mechanical resistance D1Pitch (negative/positive pressure) L1
Derivation of the filters F9Transmittance T2Thermal bridge TB1/TB2
FAN
CO
ILS
AN
D A
HU
S
Flexible and adaptable applications for water installations.
97
FFor AIR-TO-AIR and WATER-TO-AIR self-contained unit range Page 98
For INVERTER, AIR-TO-AIR self-contained unit range Page 99
For ROOF TOP AND WATER-TO-AIR SELF-CONTAINED unit range Page 99
For ROOF TOP AND AIR-TO-AIR SELF-CONTAINED unit range Page 99
For Krono Series water chiller units Page 100
Centralised Management System and BMS Page 101
Supervision System (BMS) Plant Visor Page 103
Hydrofan System Page 105
REGULATION AND CONTROL
98
F
For AIR-TO-AIR and WATER-TO-AIRself-contained unit range
REGULATIONAND CONTROL
RTR 7035 THERMOSTATOperation at 220 V at 24 V
One cool stage and one heat stage
ON/OFF selector
Temperature control dial
Ventilation selection
COOL / HEAT selection
Wall mounted
T8376B THERMOSTAT
SUPER-SI CONTROL
ETN
DSX@
Analogue thermostat
Operation at 24 V
One cool stage and one heat stage
ON/OFF selector
Digital thermostat with LCD screen
Operation at 24 V
Hot / cold / automatic selector
Fan speed selector
For units with1 or 2 compressors
Digital thermostat with LCD screen
Operation at 220 V
Hot /cold / automatic selector
Fan speed selector
Option of scheduling function (programmable ETN)
Digital thermostatwith LCD screen
Operation at 24 V
Hot /cold / automatic selector
Fan speed selector
For machineswith 1 or 2 compressors
Temperature control dial
Ventilation selection
COOL / HEAT selection
Wall mounted
Cooling only and heat pump
1 or 2 resistance stages
Contact window/economy function
Indoor/outdoor sensor (remote)
Temperature regulation range: 10ºC to 30ºC Includes all the control and protection functions of the unit
For units with heat pump or only cooling with option of one electric heater stage
Wall mounted
Cooling only and heat pump
1 or 2 resistance stages
Scheduling function
Indoor/outdoor sensor (remote)
Integrated Modbus protocol
communications output
RE
GU
LAT
ION
AN
D C
ON
TR
OL
99
FFor INVERTER, AIR-TO-AIRself-contained range units
For SELF-CONTAINED ROOF TOP AND WATER-TO-AIRunit range
For SELF-CONTAINED ROOF TOP AND WATER-TO-AIRunit range
ARIA
pGD (with PCOC, PCOC3 control cards)
Thermostat comprising a user interface terminal installed in the environment, and a input and output board located on the outdoor unit (electric panel). For AIR-TO-AIR or WATER-TO-AIR units
For units with 1 or 2 compressors
Cooling only and heat pump
2 heat stages
Control sensor configurable in environment or in return (remote)
Thermostat comprising a user interface terminal installed in the environment, and a input and output board (PCOC, PCO3) located on the outdoor unit (electric panel). Only for AIR-TO-AIR units
For unitswith 1 or 2 compressors
Cooling only and heat pump
Control of 2 or 3 electric resistance stages, heat valve and gas burner module
Parameterisable thermostat, with 3 access levels: User, Maintenance, Manufacturer
Scheduling function
(model: PROGRAMMABLE ARIA)
Option of interconnection units in network: model ARIA pLAN (refer to Centralised management systems section)
Output with Modbus, BackNet, Lonworks communication protocols, via supernode gateway and the card of the used protocol
Option of adapting and modifying the internal software to meet specific customer needs and functions
Option of interconnecting units in a network (refer to Centralised Management Systemssection)
Several options available: clock card for function scheduling, cards available for Modbus, BacNet, Lonworks, TCP-IP... communication protocols.
RE
GU
LAT
ION
AN
D C
ON
TR
OL
th TUNEThermostat comprising a user interface terminal installed in the environment, and a input and output board (uPC) located on the outdoor unit (electric panel). For INVERTER R410A, AIR-TO-AIR units
For unitswith 1 inverter compressor
Cooling only and heat pump
Power supply at 220 V
Selection of 3 speeds of the indoor fan or automatic
1 electric resistance stage (only active in defrost) Control sensor in return (remote)
Parameterisable thermostat, with 3 access levels: User, Maintenance, Manufacturer
Option of Modbus communications protocol using RS-485 card
100
FFOR WATER CHILLER UNITS
MICROCHILLER 2Thermostat typically used for AIR-TO-WATER or WATER-TO-WATER water chiller units. Made up of only one set that is used as a user interface and electronic board
For unitswith 1 or 2 compressors
Cooling only and heat pump
Management of the recirculation pump and inertia module
Scheduling function
Parameterisable thermostat, with 3 access levels: User, Maintenance, Manufacturer
Option of interconnecting units in a network (refer to Centralised Management Systems section)
Option of output Modbus communication protocol via communication card
DN33Thermostat typically used for AIR-TO-WATER or WATER-TO-WATER water chiller units. Made up of only one set that is used as a user interface and electronic board.
For unitswith up to 4 compressors.
Cooling onlyand heat pump.
Scheduling function
Management of the heatpump and inertia module.
Parameterisable thermostat, with 3 access levels: User, Maintenance, Manufacturer
Option of output Modbus communication protocol via communication card
MCX08Parameterisable thermostat typically used for R410A refrigerant AIR-TO-WATER or WATER-TO-WATER water chiller units. Made up of only one set that is used as a user interface and electronic board
For unitsof up to 4 compressors
Cooling only and heat pump
Management of the recirculation pump and inertia module
Scheduling function
Parameterisable thermostat, with 3 access levels: User, Maintenance, Manufacturer
Option of interconnecting units in a network (refer to Centralised Management Systems section)
Option of output Modbus communication protocol via communication card
RE
GU
LAT
ION
AN
D C
ON
TR
OL
101
FCENTRALISED MANAGEMENT SYSTEM AND BMS Centralised control for units with Aria pLAN thermostat
Centralised control for units with PGD thermostat and PCOC, PCO3 boardsConnection of several units using the pLAN network belonging to the PCOC, PCO3 board. Each of the machines connected in a network can be accessed from a single PGD thermostat. Maximum of 15 connection units.
Network up to 15 unitsCentralised management for an ARIA pLAN unit network, via a PGD control
Network of 15-40 unitsCentralised management for an ARIA pLAN unit network, via a PGD control
RE
GU
LAT
ION
AN
D C
ON
TR
OL
“ARIA” CONTROLLER “ARIA” CONTROLLER “ARIA” CONTROLLER
Connection to BMS with the following integrationlanguages: “Modbus” “Lonworks” “BacNet”.Please ask for details if you require other integration languages.
“ARIA” CONTROLLER “ARIA” CONTROLLER “ARIA” CONTROLLER
SUPERNODE
102
1 2 3
F
Centralised control for units with MICROCHILLER 2 thermostatOutput towards BMS supervision system via FCSER cards.
BMS connection using the following integration languages: Modbus. Please ask for details if you require other integration languages.Maximum number of connected units varies according to the integration language, please ask for details.
Centralised control for units with DN33 thermostatOutput towards BMS supervision system using specific RS-485 card for DN33.
Connection of several units with PCOC, PCO3 cards via RS-485 cards towards a supervision system.
BMS connection using the following integration languages:Modbus – Lonworks – BacNet. Please ask for details if you require other integration languages.
Modbus. Please ask for details if you require other integration languages.Maximum number of connected units varies according to the integration language, please ask for details.
RE
GU
LAT
ION
AN
D C
ON
TR
OL
103
Pl@ntVisor
F
Main features:
Monitoring functions with visual and graphic elements
User management for access control and operations registration
Management of configurable reports
Alarm management
Local and remote connectivity
Scheduling function
Energy saving management
Option of screen personalisation, emulating installation (SCADA)
Activity planning and controls for instruments or groups of instruments
SUPERVISION SYSTEM (BMS) PLANT VISOR Carel supervision and monitoring system designed to control facilities.All thermostats with MODBUS output can be integrated via RS-485.
Personalised screen for Roof Top, basic control of the unit: allows carrying out basic operations: ON-OFF, cold/heat selector, change temperature setpoints and display the status of the main components.
Facility map screen (example):a personalisation of the facility can be carried out.
Maximum number of connected units varies according to the Plant Visor model.
RE
GU
LAT
ION
AN
D C
ON
TR
OL
(CVSTD00000) (IR32XXXXX)Unit 15
(PJ32XXXXX)Unit 13
(IRDRXXXXX)Unit 14
(PCO2000XX0)Unit 12 (MTCDXXXXXX)
Unit 1
Pl@ntVisor(free)
Pl@nt Visor
104
F
Screen with a complete alarms list (access according to user level): allows displaying the alarms and resetting them.
Report management screen (access according to user level): allows configuring and making reports, according to date intervals and variables selected.
Roof Top unit detail screen: allows displaying all the variables and changing all the parameters via the Plant Visor.
Screen with a complete parameter list (access according to user level): allows reading/changing the values and saving them (backup).
RE
GU
LAT
ION
AN
D C
ON
TR
OL
105
FHYDROFAN SYSTEMSystem designed to control water installations in a centralised, simple and efficient way. Made up of a set of components, including a touch screen, to control installations with water chiller units, fan coils and ATUs.
RE
GU
LAT
ION
AN
D C
ON
TR
OL
SYSTEM COMPONENTS
Cards
Fcc base card
4 relay card
Card 2 x (0-10 V) + 2 relays
RS-485 serial card
Thermostat
AMBIENT AQUA
PGD TOUCH touch screen
The touch screen carries out the centralised control function. This offers the possibility of using a user and password access to control the elements in the facility.
Screen with all the network's elements (14 FCC, 1 AHU and 1 cooler appear in this installation).
We can access each fan coil, to turn it ON-OFF, modify setpoint, select automatic or manual low, medium or highspeed and see the cold or heat status.
AHU detail screen, to turn to ON-OFF, modify setpoint, see valve opening and cold or heat status.
Cooler detail screen, to turn to ON-OFF, select cold or heat, see discharge and return temperature, and if the cooler has an alarm.
This screen can be used to configure a timetable to start and stop all the elements.
The touch screen can govern installations of up to 30 fan coils with 1 cooler. For installations with more elements consult possible configurations.
106
NOTES
107
NOTES
108
NOTES
109
NOTES
110
NOTES
111
NOTES
112
NOTES
HIPLUS AIREACONDICIONADO S.L.
Masia Torrents, 2Tel. +34 938 934 912Fax +34 938 939 61508800 Vilanova i la GeltrúBarcelona, Spain
www.hitecsa.com