GENERAL CATALOG - regalpts.com...• General information • Construction details • Calculations...

Interactive catalog connection

APPLICATION CONSIDERATIONS

The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application informa-tion included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal Beloit America, Inc. and its affi liates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.

Regal Power Transmission SolutionsVia Guareschi, 224060 - Telgate (BG) - ItalyCustomer Service: +39 035 83 51 301Fax: +39 035 83 51 306

www.RegalPTS.com www.SystemPlastSmartGuide.com

Regal and System Plast are trademarks of Regal Beloit Corporation or one of its affi liated companies.

©2015-2016 Regal Beloit Corporation, All Rights Reserved. MCB16092E • Form# 9921E • Printed in Italy

GENERAL CATALOG

HOW SMART GUIDE™ CATALOG WORKS

Our interactive catalog is your key to direct access to the System Plast SmartGuideTM website, where you will fi nd all possible information and tools to assist you in selecting, applying our products

The page codes of this catalog opens your access to all relevant information and services

about the product you have selected on www.SystemPlastSmartGuide.com

Clicking on product code directly available:• Download DWG and STP fi les• Possibility to create your bill of material for enquiry or purchase

Related information:• Design guidelines• General information• Construction details• Calculations

Click here forrelated information.

SPECTM

Load and strength calculator

Energy savings calculator

www.SystemPlastSmartGuide.com

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

Chains & sprockets Wear strips Side guide brackets &accessories Levelers

Modular belts & sprockets Chain & beltreturn systems

Frame & structure supports Bearing supports

Curves & tracks Side guide solutions Miscellaneousproducts Related information

1 0 1 1 0 c

GENERAL INDEX

BEARINGS

CURVES & TRACKSSIDE GUIDES SOLUTION

ROLLER GUIDE SOLUTIONSMODULAR BELTS & SPROCKETS

MISCELLANEOUSPRODUCTS

CHAINS& SPROCKETS

WEAR STRIPS

LEVELERS

SIDE GUIDE BRACKETS & ACCESSORIES

LEVELERS

CHAINS & BELTS RETURN SYSTEM

FRAME & STRUCTURE SUPPORTS

ROLLER TRANSFERMODULES

Introducing

New chain &

modular belt

material

Click here...

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 6 0 1 0 a

5 4 5 1 0 a

1 1 0 1 0 a

5 0 5 1 0 a

5 5 5 1 0 a

5 3 5 1 0 a

5 5 5 1 0 a

5 0 0 0 5 a5 1 5 1 0 a

5 2 5 1 0 a3 0 0 1 0 a

5 1 0 1 0 a

5 4 0 1 0 a

5 2 6 7 0 a

7 5 6 0 0 a





1 0 1 1 0 awww.SystemPlastSmartGuide.com

Information about this product is only available on our Smart GuideTM website.

INDEX METAL CHAINS

STRAIGHT SIDEFLEXING

FOR OTHER TYPES OF CHAIN GO TO:

FLAT TOP FLAT TOP

PLATE TOP

RUBBER TOP RUBBER TOP

GRIPPER

812 - 815 - 812L - 815L 881M -881MO

1874

815VG - 815 VG TAB 881 MO VG

1874 GV

800 - 802 - 805 814 VG 8857 M VG

8157 8157 VG - 8157 TAB VG 881 VG - 881 TAB VG

515 8857 TAB - 8857M805 VG

Index Straight running thermoplastic chains

Index Sidefl exing thermoplastic chains

Index other types of chains

881R TAB - 881O TAB

881O

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

1 1 1 3 0 a 1 1 1 8 0 a 1 1 1 1 0 a

1 1 1 3 0 a 1 1 1 2 0 a 1 1 1 0 0 a

1 1 1 0 0 a 1 1 1 8 0 a 1 1 0 8 0 a 1 1 1 7 0 a

1 1 1 0 0 a 1 1 1 0 0 a 1 1 0 9 0 a

1 1 0 9 0 a

1 1 0 4 0 b

1 1 1 0 0 a

1 1 1 5 0 a

1 1 0 7 0 a 1 1 1 6 0 a

1 1 1 6 0 a1 1 0 6 0 a

1 1 1 2 0 a 1 1 1 5 0 a

1 1 1 2 0 a

1 1 0 4 0 b

1 1 1 5 0 b

1 1 0 2 0 a

1 1 0 4 0 a 1 1 0 9 0 a1 1 0 4 0 a

1 1 0 1 1 a

1 1 0 1 2 a

1 1 0 1 3 a

1 1 1 4 0 a 1 1 4 5 0 a







INDEX STRAIGHT RUNNING THERMOPLASTIC CHAINS

STRAIGHT

Index Metal chains




FLAT TOP RUBBER TOPPLATE TOP LBP

820 - 820P - 831 831 VG843 - 845

863

LBP 831

828 8257 VG

821 VG

LBP 8257

LBP 8218257

821

SK 38

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

1 1 3 7 0 a

1 1 3 4 0 a

1 1 3 0 0 a

1 1 2 0 0 a

1 1 3 7 0 a

1 1 3 2 0 a

1 1 1 9 0 a

1 1 2 1 0 a

1 1 3 8 0 a1 1 4 6 0 a

1 1 2 0 0 a

1 1 2 6 0 a

1 1 2 0 0 a

1 1 3 1 0 a

1 1 3 2 0 a

1 1 4 1 0 a

1 1 4 1 0 a

1 1 3 0 0 a

1 1 3 2 0 a

1 1 3 2 0 a

1 1 3 0 0 a

1 1 3 3 0 a

1 1 3 3 0 a

1 1 0 1 0 a

1 1 0 1 2 a

1 1 0 1 3 a

1 1 4 6 0 a







INDEX SIDEFLEXING THERMOPLASTIC CHAINS

FLAT TOP RUBBER TOPPLATE TOP GRIPPER

879M - 880M

878 TAB VG - 879 TAB VG

1843 TAB 878 TAB GS

877TAB - 878TAB879TAB - 880TAB

882 M VG - 882 TAB VG

1873 TAB VG

1863 TAB

1873 TAB GS

879 - 880

8800P

882M

882 BEVEL - 882 TAB

SIDEFLEXING

LBP

LBP 878 TAB

LBP 882 M - LBP 882 TAB

LBP 879 M


Index Metal chains



879 M VG

1873 TAB

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

1 1 3 6 0 a

1 1 3 5 0 a

1 1 2 2 0 a

1 1 2 4 0 a

1 1 2 8 0 a

1 1 4 2 0 a

1 1 2 3 0 a

1 1 4 0 0 a

1 1 4 4 0 a1 1 3 9 0 a

1 1 4 3 0 a1 1 4 7 0 a

1 1 2 6 0 a

1 1 2 6 0 a

1 1 3 0 0 a

1 1 3 0 0 a1 1 0 1 0 a

1 1 0 1 1 a

1 1 0 1 3 a

1 1 3 0 0 a

1 1 2 6 0 a1 1 2 6 0 a

1 1 2 6 0 a

1 1 3 0 0 a

1 1 2 6 0 a

1 1 2 6 0 a

1 1 2 4 0 b

1 1 3 5 0 a

1 1 2 9 0 a

1 1 4 9 0 a

1 1 2 6 0 a

1 1 3 8 0 a

1 1 2 6 0 b

1 1 4 7 0 a






OTHER TYPES OF CHAIN

MULTIFLEX CRATE CONVEYOR

1700 - 1702 - 1701 TAB CC 600 - CC 600 TAB

1706

1710 - 1710C TAB

CC 600 P - CC 600 TAB P

CC 600 FCC 631 TAB

CC 1400 - CC 1400 TAB

CC 1431 TAB

CC 1400VCC 1400V TAB

SIDEFLEXING




IndexMetal chains

SAFE

TY C

HA

IN

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

1 1 5 3 0 a

1 1 5 3 0 a

1 1 5 4 0 a 1 1 5 8 0 a 1 1 6 0 0 a

1 1 5 7 0 a 1 1 5 9 0 a

1 1 5 7 0 a 1 1 5 9 0 a

1 1 5 5 0 a

1 1 5 5 0 a

1 1 5 5 0 a 1 1 5 8 0 a 1 1 6 0 0 a

1 1 5 8 0 a 1 1 5 9 0 a

1 1 5 8 0 a 1 1 5 9 0 a

1 1 0 1 0 a

1 1 0 1 1 a

1 1 0 1 2 a







PITCH

H

12,7 (½")

25,4 (1")

PITCHmm

Hmm

VERSIONMODULE

BELTSERIES FLAT TOP FLUSH GRID RUBBER INSERTS LBP SPECIAL

12,7(½”) 8,7

Metric85

Metric100

- - - -

Imperial- - - -

Metric- - - -

Metric- - -

19,05 (¾”) 8,7

Imperial- - -

25,4(1”) 8,7

Metric -

Imperial- - -

25,4(1”) 12,7

Metric-

Imperial-

2120

2122

2121

2123

2124

2190

2250

2253

2251

2252

Flights

Roller top

Guide bar

Index modular belt straight running pitch 50,8 mm (2" ) to 63,5 mm (2 ½" )

Index modular belt sidefl exing

FOR OTHER TYPES OF BELT GO TO:

INDEX MODULAR BELTS STRAIGHT RUNNINGFROM 12,7 mm (½”) TO 25,4 mm (1") PITCH

Indication for molded to width versions

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

3 0 1 2 0 a3 0 1 6 0 a 3 0 1 1 0 a3 0 1 0 0 a3 0 0 7 0 a3 0 0 5 0 a

3 0 1 6 6 a 3 0 0 7 3 a

3 0 1 6 0 a3 0 0 5 5 a3 0 0 3 0 a

3 0 3 9 5 a

3 0 3 9 5 a

3 0 3 9 5 d

3 0 5 5 0 a

3 0 5 5 0 a 3 0 4 8 1 a

3 0 3 3 0 a

3 0 4 4 5 a

3 0 3 2 5 a 3 0 3 6 0 a 3 0 3 7 0 a

3 0 4 9 0 a 3 0 5 0 0 a

3 0 3 9 7 a

3 0 3 6 5 a

3 0 4 4 0 a

3 0 4 2 0 a

3 0 3 1 0 a 3 0 3 4 0 a

3 0 4 2 0 a

3 0 0 6 5 a

3 0 2 1 0 a 3 0 2 3 0 a

3 0 1 6 5 a

3 0 2 3 5 a 3 0 2 0 0 a 3 0 2 2 0 a

3 0 0 9 0 a

3 0 0 6 5 a

3 0 0 3 0 a

3 0 0 1 1 a

3 0 0 1 2 a






FROM 50,8 mm (2") TO 63,5 mm (2 ½")INDEX MODULAR BELTS STRAIGHT RUNNING

H

PITCH

PITCHmm

Hmm

VERSIONMODULE


50,8(2”) 16

Imperial

50,8 (2”) 22Metric

63,5(2.½”) 30

Metric

2500

2508

2630

Raised rib

Index modular belt straight runningpitch 12,7 mm (½") to 25,4 mm (1")

Index modular belt sidefl exing

FOR OTHER TYPES OF BELT GO TO:50,8 (2")

63,5 (2 ½")

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

3 0 6 4 0 a

3 0 6 5 0 a

3 0 6 1 5 a

3 0 6 2 0 a

3 0 6 4 5 a

3 0 6 1 0 a

3 0 0 1 0 a

3 0 0 1 2 a






INDEX SIDEFLEXING MODULAR BELT

H

Index modular belt straight runningpitch 12,7 mm (½") to 25,4 mm (1")

Index modular belt straight runningpitch 50,8 mm (2") to 63,5 mm (2 ½")

FOR OTHER TYPES OF BELT GO TO:PITCH

PITCHmm

Hmm

VERSIONMODULE


12,7(½”) 8,7 Metric

25,4(1”) 8,7

Magnetic chainbelt

TABchainbelt

Magneticchainbelt

25,4(1”) 12,7

Magneticchainbelt

TABchainbelt

25,4(1”) 12,7

Imperial

31,75(1¼”) 12,7

Metric

2120

2250

2250 TAB

2260

2251

2251 TAB

2256

2351245125512651

3 0 7 3 0 a

3 0 7 4 5 a

3 0 7 3 5 a

3 0 7 5 5 a

3 0 1 6 0 a

3 0 7 1 5 a

3 0 7 1 5 a

3 0 7 1 5 a

3 0 7 1 5 a

3 0 7 1 5 a

3 0 7 4 0 a

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

3 0 0 1 0 a

3 0 0 1 1 a

3 0 7 6 0 a

3 0 7 0 0 a

3 0 7 0 0 a

3 0 7 2 0 a

3 0 7 0 0 a

3 0 7 1 0 a

3 0 7 1 0 a






Indication for molded to width versions

DUAL MAGNETIC CURVE TRACKSINTRODUCTION TO CURVES

Magnetic system with metal strip: “EXTRA” curves

System Plast has developed a magnetic curve retention system for dry-running applications.

The system, sets new performance standards in magnet curve technology due to the inclusion of

a unique metal strip mounted in the inside bearing face of the top section. This area is constantly under

load due to the pressure/speed factor.

Main advantages:• Extreme dissipation of heat signifi cantly reduces wear.• Under test conditions, lowest noise decibel levels were recorded.• “Extra” curves are strongly recommended with plastic chains only!

BEVEL TAB MAGNETIC

Secure chain retention: + +++ ++

Support in return part: - + +

Chain can be lifted for cleaning: + - +++

Jamming due to foreign particles: + - ++

COMPARISON OF CURVE SYSTEMS:

BEVEL:

TAB:

MAGNETIC:

UHMWPE

Solidlubricant

Nolu®-S material is a unique compound of UHMWPE and a solid lubricant.It drastically reduces the coeffi cient of friction, maintaining the characteristics of UHMWPE.Nolu-S has a better thermal conductivity compared with UHMWPE.

Benefi ts and features• Nolu-S makes very high speeds possible, especially when running dry.• Nolu-S has an extremely low coeffi cient of friction.• Nolu-S reduces noise and squeaking.• Nolu-S reduces chain pull.• Nolu-S extends the life of the chain.• Nolu-S does not damage and scratch the surface of PET.• Nolu-S reduces the consumption of energy.• Nolu-S is a UHMWPE with a solid lubricant.

HDPE 500

UMHW

-PE1000

UMHW

-PE1200

Nylatro

n GSM

/NSM

Nolu-S

SPECIAL CURVES FOR DRY RUNNING APPLICATIONS

Design and functionality: Dual Magnetic System curves have the magnets positioned on the outside of the centre line radius of each track which results in a more effective magnetic fi eld through the curve.

R

Magnet

SYSTEMPLAST OFFERS A COMPLETE RANGE OF CURVES AND STRAIGHT TRACKS, DESIGNED FOR ALL POSSIBLE CONVEYOR APPLICATIONS. BELOW A BRIEF OVERVIEW OF THE VARIOUS CHARACTERISTICS.

Coeffi cient of frictioncomparison of materials

INDEX CURVES GO TO:

Index curve and straight track for tab

Index magnetic curves

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 0 0 1 0 a5 0 0 1 0 b







CHAIN TYPES: 879M-880M-881M / WIDTH:K325-K330 NOMINALWIDTH mm PAGE

100

111

OTHER VERSIONS:

CHAIN TYPES: 880M-881M / WIDTH: K450-K750 PAGE

CHAIN TYPES: 882M-8857M / WIDTH: K750-K1000-K1200 PAGE

CHAIN TYPES LBP: 879M-K325 & LBP 882M / WIDTH: K750-K1000-K1200 PAGE

CHAINBELT: 2120M / WIDTH: K330 PAGE

CHAINBELTS: 2250M-2260M/ WIDTH: K330 PAGE

CHAINBELTS: 2251M / WIDTH: K330-K450 PAGE

K325-K33082,5-83,8

85

8,7mm

12,7mm

82,5-83,8

100-110

85-89-90

K450-K750114,3-140,5

INDEX MAGNETIC CURVES

CURVE TYPE PAGE

SYSTEM PLAST

REFERENCEK1 KMD01K2 KMD02K3 KMD04K4 KMD05

K5A KMD07K5B KMD06K5C KMD09K5D KMD10K6 KMD03.BK7 KMD03.AK8 KMD08K9 KMD62K10 KMD61

K21A KMD21K22A KMD22K27 KMD23K42 KMD11K43 KMD12K61 KMD31K62 KMD37K65 KMD33K66 KMD32K80 KMD39K81 KMD40K85 KMD42K86 KMD41K93 KMD48K97 KMD52KA4 KMD26KA6 KMD25KA7 KMD24KA8 KMD27

KA42 KMD28KB4 KMD92

KB5D KMD96KB6 KMD91KB7 KMD90KB8 KMD93KC4 KMD86

KC5D KMD97KC6 KMD85KC7 KMD84KC8 KMD87

KC22 KMD64KC27 KMD66

LBP68C KMD68LBP86C KMD71LBP93C KMD78LBP97C KMD82

MAGNETIC CURVESCROSS REFERENCE

FOR OTHER TYPES OF CURVES AND STRAIGHT TRACK GO TO:

Index curve and straight track for tab

Introduction to curves. Go to:

Nominal Width

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 0 0 1 0 b

5 0 1 0 1 a

5 0 0 9 1 a

5 0 0 8 0 a

5 0 0 6 0 a

5 0 0 5 0 a

5 0 0 6 0 a

5 0 0 8 0 a

5 0 1 0 1 a

5 0 0 9 1 a

5 0 0 4 0 a

5 0 0 4 0 a

5 0 0 5 0 a

5 0 0 2 0 a

1 1 0 6 0 a1 1 1 6 0 a1 1 2 2 0 a1 1 3 8 0 a

1 1 0 6 0 a1 1 1 6 0 a1 1 2 2 0 a1 1 3 8 0 a

1 1 0 6 0 a

1 1 2 8 0 a

1 1 2 8 0 a1 1 3 5 0 a

1 1 1 6 0 a1 1 2 2 0 a

5 0 0 4 0 a

5 0 0 5 0 a

5 0 0 2 0 a

5 0 0 0 5 a

5 0 0 7 0 a

5 0 0 3 0 a5 0 0 3 0 a

5 0 0 3 0 a

5 0 0 7 0 a

3 0 7 2 0 a

3 0 7 0 0 a

3 0 7 0 0 a







CURVE AND STRAIGHT TRACKS FOR TAB CHAINSCHAIN TYPES: 878-879-880-881O / WIDTH: TAB K325-330-450-750 PAGE

COMPACT CURVES AND STRAIGHT TRACKS FOR TAB & BEVEL CHAINSCHAIN TYPES: 878-879-880-881O / WIDTH: TAB K325-330-450 PAGE

CURVES AND STRAIGHT TRACKS FOR BEVEL CHAINSCHAIN TYPES: 879-880-881-881O / WIDTH: K325-350-450-750 PAGE

CURVES AND STRAIGHT TRACKS FOR TAB CHAINS CHAIN TYPES: 882 TAB / WIDTH: K450-750-1000-1200 PAGE

CURVES AND STRAIGHT TRACKS FOR BEVEL CHAINS CHAIN TYPES: 882 / WIDTH: K450-750-1200 PAGE

CURVES AND STRAIGHT TRACKS FOR TAB CHAINS CHAIN TYPES: 1863-1873-1874 PAGE

CURVES FOR MULTIFLEX TAB CHAINS PAGE

CURVES FOR MULTIFLEX CHAINS WITH TOP PLATES PAGE

INDEX CURVE AND STRAIGHT TRACK FOR TAB & BEVEL

TAB BEVEL

FOR OTHER TYPES OF CURVES GO TO:

Index magnetic curves

Introduction to curves. Go to:

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 0 0 1 0 a

5 0 0 0 5 a5 0 1 8 0 a

5 0 1 6 0 a

5 0 1 5 0 a

5 0 1 2 0 a

5 0 1 1 0 a

5 0 1 3 0 a

5 0 1 4 0 a

5 0 1 7 0 a

5 0 1 7 0 a

1 1 0 7 0 a1 1 2 3 0 a

1 1 0 8 0 a

1 1 2 4 0 a

1 1 1 4 0 a

1 1 0 8 0 a

1 1 4 7 0 a

1 1 2 9 0 a

1 1 2 9 0 a

1 1 5 3 0 a

1 1 5 4 0 a

1 1 5 4 0 a





5 0 0 1 0 bwww.SystemPlastSmartGuide.com

INDEX WEAR STRIPS

WEAR STRIPS

CHAIN AND BELT SUPPORT SYSTEM

DRIVE RIVET FOR WEAR STRIPS GUIDES FOR SIDEFLEXING BELT

CHAIN AND BELT SUPPORT BAR CAPS

STANDARD MATERIAL: UHMWPEThis ultra high molecular weight material is the choice for a wide variety of applications. The low friction characteristics of UHMW allow chains and containers to move at high speed with minimum drag and noise as well as minimun container damage.

BENEFITS:• Low friction• High wear resistance• High temperature resistance

BENEFITS:• Extends the life of mating surfaces• Lowers mating surface scratching or damage

NOLU®-SNolu-S is a blend of UHMW and other dry lubricants that maintain good wear characteristics while signifi cantly reducing coeffi cients of friction. Its unique self lubricating properties make it ideal for applications requiring reduced friction, noise reduction and higher dry-running speeds.

• Reduces energy consumption• Minimizes product pulsation on conveyors• Low noise operation

UHMWPE

Solid lubricant

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 0 5 2 0 a 5 0 5 3 0 a 5 0 5 5 0 a 5 0 5 6 0 a

5 0 6 0 0 a 5 0 6 0 0 a5 0 5 8 0 a

5 0 5 5 0 b

5 0 5 7 0 a

5 0 5 7 0 a

5 0 6 5 0 a







Chain return rollers85 mm center distance

Chain return rollersOther center distances

Watertight return rollers27mm versions

Watertight return rollers40/43mm versions

Watertight return rollers82/85mm versions

Flanges for Return Rollers

Wear strip & Clamps for serpentine system

Little striker & Strikerfor serpentine system

Sliding shoe & expansion plug

for serpentine system

Single spacer & Shoe wear strip

for serpentine system

Washer & Sliding shoe for serpentine system

Wearshoesfor return system

INDEX CHAIN & BELT ROLLERS SYSTEMS

BLACK COLOR

GREEN COLOR

STANDARD

SOLID VERSION

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 1 0 3 0 a

5 1 0 4 0 a

5 1 0 5 0 a

5 1 0 9 0 a

5 1 1 2 0 a

5 1 1 3 0 a

5 1 1 4 0 a

5 1 1 5 0 a

5 1 1 7 0 a

5 1 0 2 0 a5 1 0 6 0 a

5 1 0 8 0 a5 1 1 1 0 a

5 1 1 6 0 a




Curves & tracks Side guide solutions Miscellaneousproducts Relate d information


INDEX SIDE GUIDES & CLAMPS

SHAPE SIDE GUIDE TYPE OF CLAMPS

Single clamps

Double clamps

Stainless steel clamps

Other clamps

Single clamps

Double clamps

GUIDE FOR PET BOTTLES

PRODUCT GUIDES

Other clampsOther clampsOther clampsOther clampsOther clamps

ADJUSTING RODS ADJUSTING IN CURVES THERMOPLASTIC ADJUSTING ALUMINIUM GUIDE RAIL

D-SHAPE HOLLOW EXTRUDED PROFILES

ADJUSTING IN CURVES

ACCESSORIES FOR GUIDE ADJUSTMENT IN CURVES:

Side guide

For index side guides with rollers.

Go to:

78

87 90

78

87 90

78

87 90

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 1 5 2 0 a 5 2 5 1 0 a

5 1 6 0 0 a

5 1 5 2 0 a

5 1 6 1 0 a

5 1 6 2 0 a

5 1 6 3 0 a

5 1 6 4 0 a

5 1 6 5 0 a

5 1 6 8 0 a 5 1 6 9 0 a 5 1 7 0 0 a5 1 6 6 0 a

5 1 8 3 0 a 5 1 8 1 0 a 5 1 8 2 0 a 5 1 7 4 0 a

5 1 7 2 0 a

5 1 7 3 0 a

5 1 7 3 0 a

5 1 7 1 0 a







INDEX ROLLER SIDE GUIDES & ROLLER TRANSFER PLATES

AluminiumAluminium

PVC PVC

85 & 115 mm 6” & 9”

ACCESSORIES

Can only be used straight

Loose modules

Loose Modules

Loose modules

Loose rollers

Loose profi les

Forfl at bar

40X8

Forfl at bar

40X10

APPLICATION STRAIGHT & CURVES

LATERAL CENTRAL

ROLLER TRANSFER PLATES

For index side guides, go to:

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 2 5 2 0 a

5 2 6 1 0 a 5 2 6 1 0 a5 2 6 1 3 a

5 2 6 1 2 a

5 2 5 9 2 a

5 2 6 1 1 a

5 2 5 2 1 a

5 2 5 7 0 a 5 2 5 7 1 a 5 2 5 7 2 a

5 2 6 7 0 a 5 2 6 7 1 a

5 2 5 9 0 a

5 2 5 3 0 a 5 2 5 5 0 a

5 2 6 5 0 a

5 2 6 1 4 a5 2 6 8 0 a

5 1 5 1 0 a

5 2 5 9 4 a

5 2 5 9 4 a







ECCENTRIC LEVELER

SIDE GUIDE BRACKETSSTAINLESS STEEL

MOUNTING TOP

CROSS BLOCKS T CLAMPS QUICK RELEASE CLAMP FORPHOTOCELLS CROSS BLOCK

LATERAL BRACKETSSTAINLESS STEEL

ANGLE BRACKETSTHERMOPLASTIC

ANGLE BRACKETSSTAINLESS STEEL

SPEEDSET™ GUIDE RAIL ADJUSTMENT

DRIP TRAY BRACKETS

PHOTOCELL CLAMP ASSEMBLY

INDEX SIDE GUIDE BRACKETS

SIDE GUIDE BRACKETS - FIXED TOP

AB PAGE CODE

TYPE 1 TYPE 2

35 - 31

- 61 38,5

65 - 30

66 - 30,5

- 78,5 30

- 89 38,5

SIDE GUIDE BRACKETS - SWIVEL TOP

AB PAGE CODE

TYPE 1 TYPE 2

69 - 31

77 70 43

- 69 44

A A

Type 1 Type 2

B B

A

Type 1 Type 2

BA

B

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 3 5 5 5 a

5 3 5 2 5 a

5 3 5 3 5 a

5 3 5 4 5 a

5 3 5 6 0 a

5 3 5 5 5 a

5 3 5 1 5 a

5 3 5 5 5 a

5 3 5 6 0 a

5 3 5 5 5 a

5 3 5 6 5 a

5 3 5 8 5 a

5 3 5 7 0 a 5 3 5 7 5 a 5 3 5 8 0 a 5 3 5 9 5 a 5 3 6 0 0 a 5 3 6 0 5 a

5 3 6 1 0 a 5 3 6 2 5 a 5 3 6 3 0 a 5 3 6 3 5 a 5 3 6 4 5 a






STAINLESS STEEL

FRAME & STRUCTURE SUPPORTS INDEX

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 4 0 6 0 a

5 4 0 2 0 a

5 4 0 5 0 a

5 4 0 3 0 a5 4 0 4 0 a

5 4 0 7 0 a

5 4 0 8 0 a







MISCELLANEOUS PRODUCTSMACHINE GUARDING

MOUNTINGPROFILES

TUBE JOINTS

PANEL CLAMPS

HINGES

HANDLES

DOOR LOCKS

DOOR STOP

END PLUGSRATCHEDHANDLES

SHAFT COLLARKNOBS

MISCELLANEOUS COMPONENTS

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 4 5 2 0 a

5 4 5 3 0 a

5 4 5 4 0 a

5 4 5 5 0 a

5 4 5 6 0 a

5 4 5 7 0 a

5 4 5 2 0 a

5 4 5 3 0 a 5 4 6 2 0 a

5 4 6 3 0 a5 4 6 0 0 a5 4 6 1 0 a







Ø D Articulated foot

Fixedfoot Sanistar Metal

foot

30 - - -

40 - - -

50 -

60 - - -

75 - 80 -

100

125

INDEX LEVELERS & TUBE ENDS

BasesØ 80-100-150-200

Welded endplates

Threadedtube ends

Single Lag hole pad

General tolerance on total height L ± 2 mm

-

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 5 5 2 5 a5 5 5 4 0 a

5 5 5 5 5 a

5 5 5 7 0 a

5 5 6 1 5 a5 5 6 0 0 a5 5 5 8 5 a

5 5 6 1 5 a

5 5 6 4 5 a5 5 6 6 0 a

5 5 7 5 0 a 5 5 6 7 5 a

5 5 6 7 5 a 5 5 7 2 0 a

5 5 6 3 0 a

5 5 7 3 5 a

5 5 7 6 5 c

5 5 7 6 5 a

5 5 6 7 5 a5 5 7 2 0 a5 5 7 0 5 a

5 5 6 9 0 a 5 5 7 0 5 a

5 5 6 9 0 a5 5 7 3 5 a

5 5 7 5 0 a5 5 7 5 0 a

5 5 7 8 0 a

5 5 7 9 5 a5 5 8 4 0 a

5 5 8 1 0 a5 5 8 2 5 a







TYPE SHAFTDIAMETER

GRUBSCREWS

ECCENTRICRING

UFL / UCFHØ 12 - Ø 19

Ø 20 - Ø 40

UCF / UCFQØ 12 - Ø 19

Ø 20 - Ø 40

UCFG Ø 25 - Ø 35

CL Ø 30 - Ø 40

CS Ø 30 - Ø 40

UCP Ø 20 - Ø 40

UCPA Ø 20 - Ø 30

SQL Ø 12 - Ø 20

UCFB Ø 20 - Ø 30

UCHE Ø 20 - Ø 35

UCT Ø 20 - Ø 35

UCTT Ø 20 - Ø 35

INDEX MOUNTED BEARINGS

LOOSE SAFETY CAPSBALL BEARINGS

GREASE NIPPLES

1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a

5 6 0 6 0 a

5 6 0 8 0 a

5 6 1 2 0 a

5 6 1 5 0 a

5 6 1 6 0 a

5 6 1 7 0 a

5 6 0 8 0 a

5 6 1 2 0 a

5 6 1 5 0 a

5 6 1 6 0 a

5 6 1 7 0 a

5 6 0 3 0 a

5 6 3 0 0 a

5 6 3 0 0 a

5 6 0 2 0 a

5 6 0 5 0 a

5 6 0 9 0 a

5 6 1 0 0 a

5 6 1 1 0 a

5 6 1 3 0 a

5 6 1 4 0 a

5 6 0 4 0 a

5 6 0 7 0 a

5 6 0 9 0 a

5 6 1 0 0 a

5 6 1 1 0 a

5 6 1 3 0 a

5 6 1 4 0 a

5 6 3 0 0 b






Interactive catalog connection

APPLICATION CONSIDERATIONS

The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application informa-tion included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal Beloit America, Inc. and its affi liates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.

For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.

Regal Power Transmission SolutionsVia Guareschi, 224060 - Telgate (BG) - ItalyCustomer Service: +39 035 83 51 301Fax: +39 035 83 51 306

www.RegalPTS.com www.SystemPlastSmartGuide.com

Regal and System Plast are trademarks of Regal Beloit Corporation or one of its affi liated companies.

©2015-2016 Regal Beloit Corporation, All Rights Reserved. MCB16092E • Form# 9921E • Printed in Italy

GENERAL CATALOG

GENERAL CATALOG - regalpts.com...• General information • Construction details • Calculations...

Documents

Transcript of GENERAL CATALOG - regalpts.com...• General information • Construction details • Calculations...