V1.3

Glowway Oy Ltd Ohdakkeentie 2 06100 Porvoo FINLAND

Tel: +358 10 328 7838 info@glowway.com www.glowway.com

GENERAL CATALOGUE

2

GLOWWAY TILES GLOW IN THE DARK GUIDING PEOPLE TO SAFETY

Glowway produces innovative and elegant glass tiles that lead people to safety in emergency situations by glowing brightly in darkness. The tiles are installed on the floor where people can follow them. According to studies low-location-lighting can significantly speed up evacuation times in emergency situations like fires as the traditional safety markings can be covered with smoke.

Glowway products do not require electricity, the luminance will last over 25 years and with normal charge the tiles glow for over 8 hours in total darkness. The product is environmentally friendly and cost-effective compared for example to led-powered systems. Glowway products do not require maintenance except regular cleaning and the products are non-toxic, non-radiative, and non-corrosive.

Glowway uses high-quality glass as its main material since it is durable, easy to keep clean and its an elegant material that sits very well in many architectural surroundings. It also does not wear off like different tape solutions even in heavy usage. Glowway uses best photoluminescent green and yellow pigments available (other colors are available but they are not safety grade) and the products exceed the ISO, DIN and ASTM standard requirements for luminosity clearly as well as the EN ISO 10545:2012 requirements for breaking strength, chemical resistance, resistance to stains and slip-resistance. The fire rating of the Glowway glass products is A1.

Glowway also focuses on accessibility. We have designed specific products that the visually impaired individuals can follow with foot or white cane. According to tests by the Finnish Federation of the Visually Impaired (FFVI), Glowway products can significantly help the visually impaired navigating in public buildings.

Glowway products have been installed e.g. in metro and train stations, hospitals, shopping malls and residential buildings. In general, Glowway products can be used in all locations where quick and efficient exit is required in emergency situations. Glowway products can also be used for decoration purposes.

Please ask also for custom-made solutions.

Aviapolis Train Station, Vantaa, Finland

3

CONTENT

PRODUCTS

BASIC LINE GLASS PRODUCTS…………………………………..……………………………………………………………….…………..4

ANTISLIP STEPFRONT (stair nosing)……………………………………………………………………………………….……………….4

PREMIUM LINE GLASS PRODUCTS……………………………………………………………………………………………………….…5

ACCESSIBILITY PRODUCTS………………………………………………………………………………………………..…………….……..6

INSTALLATION TOOLS……………………………………………………………………………………………………..……..………………8

WARNING TILES……………………………………………………………………………………………………….……………..…………….8

OTHER MATERIAL

INSTALLATION INSTRUCTIONS FOR GLASS TILES…………………………………………………………….………………………9

CARE AND MAINTENANCE INSTRUCTIONS FOR GLASS PRODUCTS…….…………………………………….……..……11

CARE AND MAINTENANCE INSTRUCTIONS FOR POLYCARBONATE PRODUCTS………………………….……….…12

GLASS TILES DATA SHEET………………………………………………………………………………………………..……………..…….13

GENERAL TERMS AND CONDITIONS…………………………………………………………………………………….…………..….15

Glowway team and products Helsinki Music Centre, Helsinki, Finland

4

BASIC LINE GLASS PRODUCTS

These photoluminescent glass tiles have flat grind edges and are mainly manufactured from standard float glass. They have an elegant and non-slippery etched surface and the daylight and afterglow color is green. These tiles are durable and can be used in inside and outside conditions.

The round tiles are very easy to retrofit. The rectangular shaped tiles can be placed sequentially to form solid lines that lead to safety. The longer tiles are perfect e.g. as stepfronts/stair nosing or baseboards.

The basic line glass products are available in following sizes:

ANTISLIP STEPFRONT (stair nosing)

Glowway’s new innovation for stairs combines three important features in one product. High-quality photoluminescent glass strip makes the stairs visible in darkness. Rubber part provides friction which makes the stair anti-slippery. The dark rubber part also provides an excellent contrast stripe for light coloured steps. For darker stair materials a custom lighter contrast colored rubber is available. The product is available in several sizes and also without the rubber part.

Glow-in-the-dark

Contrast strip

Antislip

No installation costs

Elegant complete solution

Efficient anti-slipperiness

Excellent afterglow

Accessibility

Durable

98*8 mm round tile, product code: GW0047

100*100*8 mm, product code: GW0043

300*25*8 mm, product code: GW0057

300*50*8 mm, product code: GW0038

300*100*8 mm, product code: GW0052

300*300*8 mm, product code: GW0072

5

PREMIUM LINE GLASS PRODUCTS

These beautiful photoluminescent premium line glass tiles are made out of tempered (hardened) optiwhite glass which is approximately five times harder than regular float glass. These products are extremely robust and are suitable in high traffic areas. Tiles have flat grind edges and the daylight and afterglow color is green. The tiles come with an etched non-slippery surface. The premium line glass products are available in following sizes:

98*8 mm round tile, product code: GW0002

100*100*8 mm, product code: GW0029

300*25*8 mm, product code: GW0033

300*50*8 mm, product code: GW0010

300*100*8 mm, product code: GW0017

300*300*8 mm, product code: GW0024

University of Washington Medical Center, Seattle, USA Kontula Metro Station, Helsinki, Finland

6

ACCESSIBILITY PRODUCTS

The Accessibility products are used in spaces which require consideration for the visually impaired. The products are designed to have a raised pattern which can be felt and followed with foot or white cane. The glass products are designed to be installed in a floor-groove. The polycarbonate products are easily retrofitted in various surfaces by glue or screws on top of the floor material. The rods and lists are placed sequentially to form solid lines that lead to exits. The buttons and studs can be used e.g. to warn about stairs.

GLASS ROD ETCHED Product codes: Optiwhite glass: GW0001 Tempered glass: GW0016 Size L*W*T: 300*25*15 mm Material: optiwhite non-tempered glass or optiwhite tempered glass Body color: green Afterglow color: green

The photoluminescent glass rod has an opaque surface and a 5 mm raised pattern for the visually impaired. The product is available in optiwhite non-tempered glass or optiwhite tempered glass.

GLASS BUTTON ETCHED Product code: GW0009 Size D*T: 25*15 mm Material: Optiwhite glass Body color: green Afterglow color: green

The photoluminescent glass button has an opaque surface and a 5 mm raised pattern. The button is designed for the visually impaired and can be used e.g. to warn about stairs.

Pirkkala Main Library, Nokia, Finland Helsinki Music Centre, Helsinki, Finland

7

ACCESSIBILITY PRODUCTS

POLYCARBONATE LIST Product code: GW0004 Size L*W*T: 2500*25*5 mm Material: polycarbonate Body color: green Afterglow color: green

This photoluminescent polycarbonate list has a grooved surface which provide friction. The list is used to form solid lines on the floor and is easily retrofitted by glue and/or screws. The product has a 5 mm raised pattern for the visually impaired.

Price 21,10 €/m

POLYCARBONATE STUD Product code: GW0022 Size D*T: 25*5 mm Material: polycarbonate Body color: green Afterglow color: green

The photoluminescent polycarbonate stud is easily retrofitted by screws. The product has a 5 mm raised pattern for the visually impaired. The product can be used e.g. to warn about stairs

STAINLESS STEEL STUD Product code: GW0059 Size D*T: 25*5 mm Material: stainless steel

The stainless steel stud can be used e.g. to warn about stairs. The stud has a 5 mm raised pattern for the visually impaired. The product comes with a plastic installation plug in which the stud is fixed. This product is non-photoluminescent.

GUIDING LIST ALUMINUM Product code: GW0046 Size L*W*T: 1960*25*5 mm Material: aluminum

The aluminum guiding list is meant for guiding the visually impaired. The list is used to form solid lines on the floor. The product has a 5 mm raised pattern and is mounted with glue or screws. This product is non-photoluminescent.

8

INSTALLATION TOOLS

The installation tools are meant to help the installation of the Accessibility products. The tools help set the products in the correct height. The installation tools are non-photoluminescent.

INSTALLATION CUP FOR GLASS BUTTON Product code: GW0062 Size D*T: 26*13 mm Material: acid resistant steel

The installation cup is inserted in a drilled hole. The photoluminescent glass button fits the cup perfectly and automatically sets the button in the correct level, 5 mm above floor level.

INSTALLATION PIECE FOR GLASS ROD Product code: GW0046 Size of the glass rod L*W*T: 300*25*15 mm Material: acid resistant steel

Using the installation piece makes the installation of the glass rod easy as the tool automatically sets the rod in the correct level, 5 mm above floor level.

INSTALLATION CHUTE FOR GLASS ROD Product code: GW0042 Size L*W*T: 1200*27*13 mm Material: Acid resistant steel

The installation chute is placed in a floor groove underneath the glass rod. The chute helps set the rod in the correct level, 5 mm above floor level.

YELLOW WARNING TILE LINES Product code: GW0025 Size L*W*T 300*100*8 mm Material: float glass Body color: yellow Afterglow color: yellow

This photoluminescent tile is available in yellow anti-slip screen print lines. This product can be used e.g. in metro platform to warn people about the tracks.

WARNING TILES

Glowway photoluminescent Warning tiles are used to warn about dangerous places. Yellow body and afterglow color is usually used for warning tiles and the surface is anti-slippery. For example, railway station platforms can be marked with the Yellow Warning Tiles that warn about the tracks and they can be seen glowing in bright yellow color in darkness

9

INSTALLATION INSTRUCTIONS FOR GLASS TILES Prior to installation, please ensure the tiles purchased are suitable for the application and thoroughly inspected. Glow-

way products are manufactured using low-temperature technology and the products reach their final resistance after some months. The coated backside of the glass tiles should be protected from scratches and mechanical damages dur-ing product control and the installation process.

Reclamations must be done according to the General Terms and Conditions provided by Glowway. Ensure your installer is aware of the expected completion of the tiles and there are sufficient amount of tiles for the area. Also ensure that the installation area beneath the tiles and the surface is sufficiently cleaned before beginning of the installation. Primer can be used beneath the mortar. Grit etc. left underneath the tiles can cause breaking of the tiles.

The installation of Glowway tiles requires workmanship and skills for tiling and familiarization with instructions and the products. The durability of glass tiles can only be sufficient if the installation is done professionally and according to the instructions.

If the tiles are placed sequentially, the mortar used for installing should have a drying time long enough so that the lines of tiles can be made vertically and horizontally straight and positioned correctly. The installation should be completed in accordance with the given drying time and working life of mortar. If the mortar is too dry, the attachment of the tiles might not be optimal.

The underlying surface of the tiles should be solid and the material of the tiles has to be taken into consideration when planning the end use. The tile should not be able to move after installation and should be firmly in place. The mortar should be spread evenly under each tile and all the tiles should be 100 % soundly bedded in the mortar without any space for air underneath. Uneven spreading of mortar can result in poor attachment or breaking of the tile.

The tiles should not be placed butt-joint. Grout should be used between the tiles. The possibility for thermal expansion should be taken into consideration when installing the tiles.

All freshly installed tiles should be well protected until the mortar is fully dry. Multi-Sensory tiles should be covered in a way that there is no pressure against the tiles from any direction. Walking etc. on the tiles is prohibited during the dry-ing period.

Glowway tiles are recommended to be installed at the final stage of constructing to prevent damaging the tiles. After installation, the tiles should be sufficiently protected until the constructing is completed. The tile should not be driven over with heavy machinery or vehicles.

The dispatch and installation of Glowway tiles require:

inspecting the quality of the products upon dispatch

making an approved test-installation of the products

protecting the products while the mortar is drying

keeping the tiles in a locked space and sufficient monitoring of the worksite

10

INSTALLATION INSTRUCTIONS FOR GLASS TILES

1. Glass tiles

Tile is inserted in a groove and leveled with the surface

2. Glass rods and buttons

Tile should rise 5 mm above floor level

Attachment mortar Attachment mortar

The groove in the surface material should be 6 mm wider than tile width and 5 mm deeper than tile thickness. 3 - 5 mm width

should be left between the tiles for grout seam. Exact tile width and thickness should be verified before installation.

Use appropriate attachment mortar for installation of the tiles. Do not use glue for attachment!

Tiles should be in line with each other. Attachment mortar

should be inserted between tiles. Butt joint should not be used.

With accessibility products the gap between the tiles

(above floor level) shall be seamed with grout.

Attachment mortar should cover evenly the whole area beneath the tile.

Uneven distribution of attachment mortar can result in poor attachment

or breaking of the tile.

11

CARE AND MAINTENANCE INSTRUCTIONS FOR GLASS PRODUCTS

1. Characteristics of photoluminescent glass products

Glowway’s glass products are solid, non-cellular material so they are not easily stained and are easy to keep clean. To avoid problems with sealers, we recommend acid-enduring epoxy sealers to be used with the glass tiles. This allows cleaning the glass tiles with alkali, neutral and acidic general cleaning agents. In addition, epoxy sealer withstands mechanical strain well. Cement-based sealers do not endure acidic cleaning agents and the seals must be imbued with water before cleaning and after acidic cleaning rinsed with care.

Hydrofluoric acid or its by-products must not be used in cleaning of the glass tiles. Also the use of cleaning varnishes containing abrasive components and abrasive brushes should be avoided since they can damage the anti-slip surface of the glass tile. Fur-thermore, any conservatives that create a film or membrane on the surface of the polycarbonate products can weaken the anti-slipperiness of the product and are not recommended.

2. Principles of cleaning

Clean the glass- and the surrounding surfaces regularly.

Choose the cleaning agent based on the sealer. Do not use acidic (pH7) cleaning agents. Epoxy sealers do withstand neutral, acidic and alkali cleaning agents.

Use general neutral (pH 6-8) cleaning agents according to the manufacturers’ instructions and recommendations.

Avoid cleaning varnishes containing abrasive components as well as abrasive brushes.

Clean the glass surfaces with vacuum cleaner, cleaning cloth, soft brush (also mechanical brush cleaning) or suitable pressure cleaning.

3. Cleaning after installation

The products must be cleaned after installation. Loose material is to be swept with soft brush. Afterwards the products are to be cleaned with suitable cleaning agents.

Choose the cleaning agent based on the sealer. Do not use acidic (pH7) cleaning agents. Epoxy sealers withstand neutral, acidic and alkali cleaning agents.

Possible remains of cement can be removed with acidic cleaning agents but remember to protect the cement based seals since they do not endure acidic cleaning agents. The seals can be protected by imbuing them with water. After Acidic cleaning the cement based seals must be rinsed thoroughly.

Epoxy remains can be removed with special agents which can also be used to remove paint and varnish stains.

4. Regular cleaning and stain removal

Depending on the sight, the cleaning should be done several times per day, daily or weekly. Normally the cleaning can be done with warm water with added general neutral (pH 6-8) cleaning agents.

Choose the cleaning agent based on the sealer. Do not use acidic (pH7) cleaning agents. Epoxy sealers withstand neutral, acidic and alkali cleaning agents.

Stains are removed when necessary with:

Chalice and rust: acidic cleaning agent, pH < 7 (remember to protect the seals)

Oil, grease, wax: alkali cleaning agent, pH > 7.

12

CARE AND MAINTENANCE INSTRUCTIONS FOR POLYCARBONATE PRODUCTS

1. Characteristics of photoluminescent polycarbonate products

Glowway’s polycarbonate products are solid, non-cellular material so they are not easily stained and are easy to keep clean. Still, polycarbonate as a material restrains the use of some cleansers. Polycarbonate does not endure alkaline (pH>7) cleaning agents, acids (e.g. sulphur acid, nitric acid, acetic acid) or solvents (e.g. acetone, toluene, dichloromethane, turpentine, paint-stripper). In addition, polycarbonate does not endure water heated over 60◦C. Also the use of cleaning varnishes containing abrasive components and abrasive brushes should be avoided since they grind the surface of the polycarbonate products dam-aging it. Furthermore, any conservatives that create a film or membrane on the surface of the polycarbonate products can weaken the anti-slipperiness of the product and are not recommended.

Polycarbonate endures citric acid, regular oil-products (mineral oil, cooking oil), ethanol, hexane and heptane.

Use warm water and general neutral cleaning agents (pH 6-8) to clean the products.

We recommend epoxy sealer to be used with the polycarbonate products.

2. Principles of cleaning

Clean the polycarbonate- and the surrounding surfaces regularly.

Use general neutral (pH 6-8) cleaning agents according to the manufacturers’ instructions and recommendations.

Avoid cleaning varnishes containing abrasive components as well as abrasive brushes.

Clean the surface with vacuum cleaner, cleaning cloth, soft brush (also mechanical brush cleaning) or high-pressure cleaning. Do not use water over 60◦C warm to avoid cracking of the polycarbonate.

3. Cleaning after installation

The products must be cleaned after installation. Loose material is to be swept with sift brush. Afterwards the products are to be cleaned with general neutral (pH 6-8) cleaning agents.

Epoxy remains can be removed with special removers but the applicability polycarbonate must be checked.

4. Regular cleaning and stain removal

Depending on the sight, the cleaning should be done several times per day, daily or weekly. Normally the cleaning can be done with warm water with added general neutral (pH 6-8) cleaning agents.

Stain removing should be done according to recommendations of cleaning professionals. Try first to small area to ensure the applicability.

13

GLASS TILES DATA SHEET

Manufacturer Glowway Oy Ltd Tel: +358 10 328 7838 Ohdakkeentie 2 info@glowway.com 06100 Porvoo www.glowway.com Finland VAT no. FI21396956 Product description Glowway glass tiles are manufactured from tempered or float glass depending on the product with photoluminescent pigment on the bottom side. Some mo dels have screen print patterns on the top, some on the bottom, and some models have anti-slip structure combined in the screen print pattern.

Sizes & tolerances The sizes of different models can be found in the Product Catalogue. Glowway glass tiles are mostly handicraft products and the general maximum tolerances for the glass tiles are length +/- 1 mm, width, +/- 1 mm, thickness +/- 1 mm, and curvature (side, top, bottom) +/- 1 mm.

Color The body color and after-glow color of the guiding tiles is normally green. The body color and the after-glow color of the warning tiles can be green or yellow depending on the usage. The colors of the tiles may vary slightly due to reasons beyond our control including variations of the natural photoluminescent mate-rials, the lighting, surface variations, glass variations, method of application, and thickness of film applied.

Installation Please refer to Glowway Installation Instructions for Glass Tiles for information as to the installation of these products.

Care and Maintenance Recommendations Please refer to Glowway Care and Maintenance of glass tiles for technical information as to the care of these products.

Photoluminescent pigment According to the manufacturer the afterglow pigment is not considered flammable, poisonous, radiative or corrosive substance. The manufacturer gives mini-mum 25 years working life for the photoluminescent pigment.

Disposal Regarding the disposal, according to EU Regulation N:o 1272/2008 the products are considered as general waste.

GLOWWAY GLASS TILES PHOTOLUMINESCENCE TEST RESULTS Tested by SP Technical Research Institute of Sweden, tests MTk3P04444-K01 - KO6

This summary compares different photoluminescence standards and Glowway’s products in comparison to these standards. The standards in question are: •ISO 16069:2004 •DIN 67510-1:2009 •ASTM E2073-10

According to PSPA (The Photoluminescent Safety Products Association, see http://www.pspa.org.uk) the samples fulfil requirements for PSPA class D (best class).

ISO DIN ASTM

Activation conditions

Light type Xenon Xenon Fluorescent

Activation luminance level 1000 lx 1000 lx 1 ft/c (n. 10 lux)

Activation time 5 min 5 min 60 min

Color of the light 6500 K 6500 K

Following conditions to be fulfilled (mcd/m2) Glowway average Glass products

10 min >20 >20 >20 338

60 min >2,8 >2,8 >2,8 44,1

Time to 0,3 mcd/m2 340 340 - 3097

PSPA Class

mcd/m2 after 2 minutes

mcd/m2 after 10 minutes

mcd/m2 after 30 minutes

mcd/m2 after 60 minutes

Decay time (min) to 0,3 mcd/m2

D 1100 260 85 35

C 690 140 45 20

B 210 50 15> 7

A 108 23 7 3

Glowway average Glass products

1534 338 100,4 44,1 3097

http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2008:353:0001:1355:FI:PDF

14

GLASS TILES DATA SHEET

Technical data Tests according to EN ISO 10545:2012 Tested by ZAG Ljubljana, Slovenian National Building and Civil Engineering Institute, Department for Materials, Test reports no: P1338/13-480-1 P841/14 – 480 – 1

DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH All 8mm thick glass products (float glass): Breaking strength average Modulus of rupture average All 8mm thick glass products (tempered glass): Breaking strength average Modulus of rupture average Multi-Sensory Guiding Rod (float glass): Breaking strength average Modulus of rupture average Multi-Sensory Guiding Rod (tempered glass): Breaking strength average Modulus of rupture average

1824N / 186 kg / 410 lbs 40,6 N/mm2 6476N / 660 kg / 1455 lbs 173 N/mm2 6200N / 632 kg / 1394 lbs 76,1 N/mm2 27740N / 2829 kg / 6237 lbs 158,4 N/mm2

Minimum >800N Minimum >18 N/mm2

DETERMINATION OF CHEMICAL RESISTANCE Products without anti-slip stripes: HC1 solution 3%: Citric acid solution 100g/l: KOH solution 100g/l: NH4CI solution 100g/l: NaC10 solution 20g/l: Products with anti-slip stripes: HC1 solution 3%: Citric acid solution 100g/l: KOH solution 100g/l: NH4CI solution 100g/l: NaC10 solution 20g/l:

A A A A A A A A A A

class A: No visible effect class B: Visible effects on cut sides class C: Visible effects on cut sides, non-cut sides and on the proper surface

DETERMINATION OF RESISTANCE TO STAINS Products with anti-slip stripes: Green staining agent Red staining agent Solution of Iodine 13g/l Olive oil Products with etched surface: Green staining agent Red staining agent Solution of Iodine 13g/l Olive oil

5 5 5 5 3 3 3 3

class 5: stain removed with running hot water class 4: stain removed with the weak cleaning agent and with running hot water class 3: stain removed with the strong cleaning agent and rotating brush class 2. stain removed with suitable solvents (Hcl, KOH, acetone and other specific solvents) class 1: stain is impossibly removed with any of the test procedures

DETERMINATION OF SLIP RESISTANCE (PTV Value) Products with anti-slip stripes: Dry surface longitudinal y Dry surface lateral y Wet surface longitudinal y Wet surface lateral y Products with etched surface: Dry surface longitudinal y Dry surface lateral y Wet surface longitudinal y Wet surface lateral y

108 107 41 50 121 111 44 44

Slip potential (PTV) High 0-24 Moderate 25-35 Low 36+

FIRE RATING General Euroclass fire rating for glass

A1

15

GENERAL TERMS AND CONDITIONS

1. General All deliveries, services and quotations by GLOWWAY are made exclusively on the basis of these terms and conditions. Other terms and conditions apply only if they are accepted in writing by GLOWWAY. This also applies if the customer confirms a quotation by GLOWWAY with reference to its own terms and conditions of business or purchase. 1.1 Contract parties and Delivery Contract The contract for delivering the goods and/or the order and the order confirmation (Delivery Contract), together with these terms and conditions, form a contract (hereinafter referred to as “Delivery Contract”) by which GLOWWAY (Supplier) commits to supply to the customer (Orderer) the goods (hereinafter referred to as “Products”) Unless otherwise agreed in the Delivery Contract, these terms and conditions apply to all deliveries between the Supplier and Orderer. Furthermore, these terms and conditions apply to all possible future delivery contracts between the Supplier and Orderer unless using an updated version of the terms and conditions is agreed upon. 1.2 Application of terms and conditions and order of reading The Delivery Contract and these terms and conditions together form a contract entirety which will be applied to the delivery of the products. In case of a conflict between the Delivery Contract and the terms and conditions, the terms in the Delivery Contract will be used primarily. 1.3 The validation of the Delivery Contract The Delivery Contract is valid when both parties agree to the terms of the Delivery Contract by signing the contract and/or when the Supplier confirms the order made by the Orderer by providing the Orderer electronically the order confirmation. The Supplier is not obligated to deliver the Products based on the order but confirmation from the Supplier is needed for the Delivery Contract to be valid. The Supplier is entitled to check the Orderer’s credit reference if it chooses to do so. 2. Terms of payment The agreed prices are applicable. Supplier is not bound by prices appearing in price lists. Prices are subject to adjustment at any time, without prior notice, with reference but not limited to changes in market conditions, inflation or exchange rate fluctuations. In the case of follow-up orders, Supplier is not bound by prices from prior orders. Unless otherwise agreed, the invoice shall be dated with the day of the order confirmation by Supplier. 50 % of the total invoice amount shall be paid into Glowway’s account before the manufacturing of the products begin. The remaining 50 % of the invoice amount, unless otherwise agreed, shall be paid into Glowway’s account before the goods are shipped/collected. 2.1 Payment shall be made according to the due date. Interest shall be charged on overdue payments from the due date on, as stipulated in current legisla-tion on interest. 2.2 The Orderer shall pay the invoice even if he has made a complaint or reclamation. 2.3 Prices stated by Supplier are understood to be ex-works excluding the cost of delivery, unless otherwise agreed. 2.4 If the Orderer defaults on payment or circumstances indicating deterioration in the Orderer's financial position become known, Supplier is entitled to withdraw from the contract and to discontinue agreed deliveries. In this case all Supplier accounts receivable are immediately due for payment. 3. Terms and time of delivery Unless otherwise agreed, the terms “Ex Works” / EXW INCOTERMS 2010 shall apply. The Supplier may, if so agreed, arrange for shipment at the Orderer’s cost and risk. Supplier’s default transport packaging shall be included in the price of the delivery unless otherwise agreed. 3.1 Unless otherwise agreed, delivery times / delivery dates are only binding on Supplier if they are explicitly confirmed in writing. Claims for compensation on grounds of late delivery are precluded unless Supplier deliberately or negligently fails to comply with the conditions of the delivery. In this case liability is limited to the immediate damage due to delay. No compensation will be paid for lost profits, losses due to business interruption and costs or expenses related to covering purchases. 4. Documentation and samples Dimensional and text data as well as illustrations appearing in Supplier documents of any kind are not binding, unless Supplier explicitly confirms these data when concluding the contract. In case Supplier provides product samples to the Orderer, Supplier commits to provide end products with equivalent quality. Supplier provides the Orderer with the necessary installation instructions and product specifications. General care and maintenance instructions for ceram-ic tiles are accordingly applied to Supplier’s glass products. 5. Legal Norms and Government Directives Orderer must inform Supplier about legal norms and government directives affecting the delivery, equipment or use of the goods which are the subject of enquiries or orders. This obligation to provide information includes in particular provisions regarding the nature and use of the goods to be supplied, safety regulations, health regulations, ordinances and specifications regarding prohibited substances, import regulations, etc. 5.1 If this obligation to provide information is infringed, Supplier denies any liability. In such cases, the Orderer undertakes to indemnify Supplier in full for all claims arising therefrom.

16

GENERAL TERMS AND CONDITIONS

5.2 The Orderer guarantees to Supplier that the manufacture of Orderer defined customized products ordered by the Orderer is admissible without infringing the rights of third parties, in particular intangible property rights or industrial property rights. Otherwise Supplier can withdraw from the contract with full indemnification by the Orderer. Furthermore, the Orderer undertakes to indemnify Supplier in full for all claims by third parties for infringement of their rights. 6. Supplier is entitled to withdraw from a delivery contract without consequent liability for damages if unforeseen problems, which cannot be resolved with reasona-ble effort, arise during manufacture (Force Majeure). Supplier is obliged to inform the Orderer immediately when the Force Majeure has emerged. 7. Incoming returned goods inspection at Supplier confines itself to identifying the goods, reviewing the delivery and inspection documents, ascertaining shipping damage which is clearly apparent externally and checking the quantity on the basis of estimates. All costs arising from quality defects, deviations in quantity or deliv-ery which is late or to the wrong address will be charged to the Orderer. Orderer is responsible for determining the suitability of the products in the project. 8. Unforeseen events such as force majeure and other occurrences outside the control of Supplier or its sub-suppliers release Supplier from the obligation to make partial or complete delivery. Compensation claims of any kind are precluded in this case. 9. Unless otherwise agreed, goods may only be returned with the consent of Supplier. 10. Retention of Title The goods remain the property of Supplier until all payments have been received in full. Supplier is entitled to request the return of the goods if the Orderer fails to fulfill his contractual obligations. This also applies to delays in payment by the Orderer. 10.1 The Orderer is obliged to treat with care the goods delivered to him, insure them appropriately and maintain them as far as necessary. 10.2 As long as the purchase price has not yet been paid in full, the Orderer must inform Supplier immediately in writing if the goods are subject to third-party liens or if the goods are otherwise attached by third parties. 11. Notification of Defects The Orderer must inspect the goods promptly after delivery and in seven (7) days’ time notify Supplier in writing if any defect is apparent. If the Orderer fails to make such notification, the goods are deemed to be accepted, unless the defect is such that it was not apparent upon inspection. If such a defect becomes apparent later, notification must be made immediately after it is discovered; otherwise the goods are deemed to be accepted, even considering this defect. 11.1 The period of limitation for claims by the Orderer in respect of manufacturing defects is three (3) years. This commences on the delivery of the goods. 11.2 Upon notification of a defect Supplier has the right to have the defect thus notified examined by specialists selected by Supplier. 11.3 The goods which are the subject of the complaint must in any case be properly stored until Supplier gives its consent for their return. Any consequential costs arising from unconfirmed return deliveries will be charged in full to the Orderer. 11.4. In the event of defective goods the Orderer is entitled to subsequent delivery of goods free of defects. If subsequent performance fails, the Orderer is entitled to reduce the purchase price. 11.5 Liability for consequential damage arising from defects of all kinds is precluded to the legally permissible extent. This applies both to indirect and direct damage and also to lost profits. Any type of reworking of components without the consent of Supplier, or improper treatment or storage, results in the loss of all claims against Supplier in respect of defects. 11.6 If action by the Orderer to avert risks (e.g. product recalls) is necessary due to defective goods supplied by Supplier, this action must be coordinated with Suppli-er before it is implemented. Otherwise the Orderer has no entitlement to claim for damages against Supplier. 12 Supplier is liable in the event of intent or gross negligence, also of its representatives or persons employed to perform its obligations, in accordance with legal provisions; also if Supplier culpably fails to fulfill material contractual obligations. In the absence of deliberate breach of contract by Supplier, the liability of Supplier for damages is limited to the foreseeable typical damage occurring. 12.1 Liability for culpable injury to life, limb or health and liability under product liability legislation remain unaffected. 12.2 Unless otherwise explicitly set forth in the foregoing, liability of Supplier is precluded. 13. Termination of contracts The termination of contracts is always subject to the written consent of Supplier. 14. Confidentiality All models, sketches, explanations and samples from Supplier are confidential information which has to be kept secret and may not be made accessible to unauthor-ized third parties. 15. Jurisdiction Place of jurisdiction is Finland and Finnish law is applied. 16. Escape Clause If one or more of these provisions and the other agreements concluded should be wholly or partly invalid or impracticable or subsequently lose its legal effect or feasibility, the effectiveness of the remaining provisions shall not thereby be affected. The invalid provision will then be replaced by the contracting parties in a man-ner resembling as closely as possible the intention of the invalid provision. 17. These terms and conditions are subject to change without prior notice and valid until altered by Supplier.

17

Glowway Oy Ltd Ohdakkeentie 2 06100 Porvoo FINLAND Tel: +358 10 328 7838 info@glowway.com www.glowway.com

VAT no: FI21396956

Siilitie Metro Station, Helsinki, Finland