Towing accessories • Loading skids • Load restraint • Cleaning products • Safety & Security

General Accessories

Page

On the road accessories: towballs & covers, stabiliser, socket tester & towing guides 69Loading skids in steel and aluminium for LT/LM, Beavertail, Tipper & Tilt-bed trailer ranges 70Load restraint, rope and rope hooks, ratchet straps, boxvan shoring poles and tie downs 71 Fenwick’s dedicated trailer and caravan cleaning and protective products 72Safety & Security 73

Contents

Loading Skids Page 70

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:30 Page 68

2

1

3

4

5

6

7

8

9

9

P0233 Standard flange towball. 50mm ball.

P0421 Combination towball. 50mm ball and pin arrangement.

B0083 Towball cover. To fit standard bolt on type of tow ball.

B0084 Socket cover. To keep your 12N, 12S or 13pin towing socket clean and dry, preventing those annoying lighting problems.

B0001 Socket tester. Test for correct function from the towing vehicles 12N socket, complete with 5m cable.

C95020 Towing & the Law. By the Society of Motor Manufacturers and Traders (SMMT) this booklet gives a valuble insight into trailer and towing law with sections on tyres, lighting, couplings etc. As well as towing with commercial vehicles and hints on correct and safe loading.

C95015 Horsebox Trailer Towing Guide. A booklet on towing horsebox trailers. Provides advice on all aspects of towing a horsebox trailer and caring for your horse whilst in transit.

C95010 The Complete trailer manual. This Porter manual covers in depth all areas of trailer ownership, use and maintenance with workshopsections covering topics from re-wiring the 7 pin plug to replacingbrakes and bearings. It includes a DIY Trailer 'MOT' to ensure thateverything is legal and in perfect working order.

B0119 Safety Kit. Gloves, safety goggles, pair of dust masks, ear defenders and hooded overall. (Contents may vary from illustration)

General AccessoriesOn The Road

Page69

4

3

5

6 7

8

1

2

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:31 Page 69

Page General AccessoriesLoading Skids to suit the LT/LM, Tiltbed,

Beavertail & Tipper range

KX5566 Loading Skids. A pair of 1.8m (6') formed steel loading skids to fit 8' long LT/LM and tippers.

KX5568 Loading Skids. A pair of 2.5m (8') formed steel loading skids to fit LT/LM and tipper models 10' and over.

KX5596 Loading Skids. A pair of 1.8m (6') lightweight aluminium skids to fit LT/LM and tippers.

KX5598 Loading Skids. A pair of 2.5m (8') lightweight aluminium skids to fit LT/LM and tipper models 10’ and over.

C11450 Skid Latch. This small toggle holds the skid in place on LT/LM/DP models. (2 per trailer)

KS0900 Skid Flap Kit. LT / LM & DP120G – Covers the skid opening and doubles as a number plate holder. Suitable for trailers manufactured before April 1996

KS0901 Skid Flap Kit. Beavertail - Covers the skid opening and doubles as light plate and number plate holder. Will fit pre 96 & current models

KX5569 Loading Skids. A pair of 1.8m (6') lightweight loading skids with timber infill centres. Suitable for trailers manufactured before April 1996

1

2

3

4

5

6

6

1

2

3

4

5

LM167/B with optional headboard, skids, electric winch, prop stands andlashing rings.

The formed steel and lightweight aluminium skids were introduced inApril/May 1996 and arestowed side by side

Skids to suit other models CT177 page 132

CT115/CT136 page 133 GX Range pages 136, 137 & 138

Eurolight page 142

For prop stand kitsplease see pages57, 58, 133 & 142

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:31 Page 70

BV85 twin axle with roller shutter

P1046 Cargo strap. 3 metre long cargo strap.

P1049 Cargo strap. 8 metre long ratchet cargo strap.

P1042 Wheel strap. Specially designed for lashing vehicle wheels on car transporters.

P1113 Lashing ring. Fixes through the floor to chassis to provide a low profile lashing point (under-floor reinforcement may be required).

KX0200 Lashing ring. Contains recessed lashing ring with all fixings (should be welded to chassis)

KX0201 Lashing ring. With all fixings GX.

KX0651 Light duty lashing point. Supplied as a pair complete with fixing bolts, ideal for unbraked trailers BV64E, HB510XL & HB610

P1050 Shoring pole. BV4 Series spring loaded pole that fits between the receiver tracks to secure upright loads.

P1047 Shoring pole. BV5 Series spring loaded pole that fits between the receiver tracks to secure upright loads.

P1048 Shoring pole. BV6 Series spring loaded pole that fits between the receiver tracks to secure upright loads.

B0102A Elastic strap. Ideal for use with the Tack Pack kit, or general lashing requirements. 32” length

B0102B Elastic strap. Ideal for use with the Tack Pack kit, or general lashing requirements. 36” length.

B0102C Elastic strap. Ideal for use with the Tack Pack kit, or general lashing requirements. 42” length.

P1035 Receiver track. Allows for the use of shoring poles, 2.40m.

P1036 Receiver track. Allows for the use of shoring poles, 3.10m.

P1037 Receiver track. Allows for the use of shoring poles, 3.62m.

P12451 Rope cleat. Round plastic cleat used on P5 model.

C04663 Rope Hook. Used on the Low loader range of trailers.

C04664 Rope hook. Formed rope hook used on general duty trailer models.

C04667 Rope hook. This rope hook is riveted to the trailer and has a lower profile than those used on other models. Used on the P6E & P7E

C04669 Rope Hook. Used on the Eurolight range.

KS0204 Lashing Lugs. 1 pair. Fitted to the GX range.

P1340 Rope. 6mm woven polypropylene rope. (per metre).

B0119 Safety Kit. Gloves, safety goggles, pair of dust masks, ear defenders and hooded overall. (Contents may vary from illustration).

1

14

15

15

16

2

3

4

5

2

3

4

5

6

7

8

9

10

16

6

14

1

12

11

13

13

8

1097

12

General AccessoriesLoad Restraint

Page71

11

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:31 Page 71

Page72

General AccessoriesCleaning Products

B0112 Horsebox & trailer cleaner. For all trailer types. Effective removal of black streaks, road traffic film, green algae, fungus, moss, bird lime and drainage stains. This pleasant smelling solution also contains fly repellent and sanitizer and can be used for interior cleaning. (Up to 40 standard exterior washes from this 1litre bottle). No acids, caustic, abrasives, silicon or solvents

B0108 Caravan cleaner. Easily cleans all exterior surfaces including acrylic windows. Removes black streaks, green algae and road grime. (Up to 40 washes from this 1litre bottle). Ideal for use on G.R.P surfaces such as those found on our boxvan range.

B0110 Bobby Dazzler. A unique protective coating applied during rinsing. No need to polish. Keeps vehicle cleaner for longer and makes cleaning next time easier. Contains algae inhibitor. (Up to 60 washes per bottle).

B0111 Overwintering. Cost effective winter protection. Helps prevent green algae growth and water ingress. The vehicle stays cleaner and makes spring cleaning easier. When diluted this 1litre bottle will protect 50 square metres.

1

2

3

4

FENWICKS HORSEBOX AND TRAILER CLEANERWhen you have spent a lot of money on a horsebox or trailer,it is important to keep it looking good and to protect it.

Fenwick’s Horsebox & Trailer Cleaner is specifically formulatedfor cleaning both the interior and exterior of horseboxes andtrailers, with added fly repellent and sanitizer. It will removeblack streaks, diesel fumes, rust and drainage stains, algae,moss, fungus, road and traffic film. It is safe on all surfacesand all types of paintwork including airbrushed andcustomised woodwork, aluminium, steel, galvanised steel,rubber, fibreglass, decals, logos and mastics or sealant. Thereis no other cleaner that is safer to use, or that is as economicalin use. The raw materials used for the manufacture of thecleaner are also the most biodegradable in their classregardless of cost, making sure that there is no other cleanerthat even comes close for biodegradability. Fenwick’sHorsebox Cleaner cleans in a unique way, attracting dirt like amagnet, it then surrounds the dirt and stops it from sticking.

Most other cleaners use aggressive agents e.g. sodiumhydroxide (caustic), metasilicates, acids, abrasives, or solventswhich can damage paintwork and metalwork.

12

34

HB506

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:31 Page 72

KX8105 Ifor Williams Coupling Head Lock. For all Ifor Williams trailers with Avonride coupling heads, this lock is designed to encase the operating handle and lock sections of the coupling head to prevent unauthorised operation or tampering of the components within. Tested and approved to the coveted Gold Standard by Sold Secure. This means the product offers the top level of resistance against the dedicated thief. Supplied with two keys, dummy ball and waterproof cover.

B0025 Lock chain. Hardened square links with protective nylon cover, 8mm - 0.91M.

B0026 Lock chain. Hardened square links with protective nylon cover, 10mm - 0.91M.

B0027 Lock chain. Hardened square links with protective nylon cover, 10mm - 2M.

B0028 Padlock. High security rating (shrouded shackle) Size (Throat/diameter) 25/8.

B0029 Padlock. Laminated steel body and hardened shackle, special bumper to prevent damage to locked item. Size (Throat/diameter) 59/8.

B0030 Padlock. Solid brass body with hardened steel pin. Square throat design. Size (Throat/diameter) 12/10.

B0031 Padlock. Set of 6 padlocks all keyed alike, ideal for toolboxes or trailer ramps. Size (Throat/diameter) 24/6.

B0032 Padlock. Laminated steel body and hardened shackle, cover to prevent damage to locked item. Size (Throat/diameter) 18/6.

6

2

1

2

2

2

3

4

5

6

7

4

5

3 7

1

Coupling head lock manufacturedby Ifor Williams

Safety & SecurityVisual Deterrents

Page73

Available fromAutumn 2009

5. IWT Catalogue'09 P62-81_Ifor Williams Catalogue P62-81 10/08/2009 10:31 Page 73