GEA Farm Technologies The right choice. - htequipment.net · GEA Farm Technologies A !’˚ˇ . ......
Transcript of GEA Farm Technologies The right choice. - htequipment.net · GEA Farm Technologies A !’˚ˇ . ......
GEA Farm Technologies
GEA Houle Inc.
Manufacturing Plant and Canadian Sales office
4591, boul. St-Joseph, Drummondville, QC, Canada, J2A 0C6
Tel.: 1.819.477.7444 / Fax: 1.819.477.5565
www.geahoule.com
GEA Farm Technologies
GEA Farm Technologies Inc. (Houle)
USA Distributor
1880 Country Farm Drive, Naperville, IL 60563 USA
Tel.: 1.800.563.4685 / Fax: 1.819.477.0486
www.gea-farmtechnologies.com/houle/en
Maxi-Pump
High capacity centrifugal pump
GEA Farm Technologies - The right choice.2014-4
815-0
90 / P
rinte
d in C
anada (V.
05.1
1)
GEA Farm Equipment | Houle
GEA Farm Technologies
GEA Farm TechnologiesThe right choice.
2 | GEA Farm Technologies The right choice. | 7
Maxi-Pump and side mount agitator kit Maxi-Pump specifications
Standard equipment
• 3 point hitch with adjustable legs;
• 20” (508 mm) diameter impeller with 6blades (see chart below);
• Bearing assembly in oil bath protectedby a greasable 3 seals mechanism;
• Intake flapper valve with thick rubber topositively shut against a stainless steelpipe;
• 6” (152 mm) intake and discharge.
Optional
• Maxi-Pump on trailer;
• Manual primer pump or primer pumpwith hydraulic motor;
• Impeller 28” (711 mm) x 540 RPM or im-peller 20” (508 mm) x 1000 RPM (seechart below).
Maxi-Pump on trailer
Intake flapper closed Intake flapper opened
* The maximum pumping head permitted shown takes consideration of the maximum suction depth. The amount of solids contained in the liquids will progressively reduce the maximum suction depth shown on the chart.
Impeller Tractor UsageMaximum
Pumping headpermitted
Maximum suc-tion depth
(water)
20” (508 mm) dia. x 540 RPM 40 HP min. Pumping water from platforms * 15 ft (4.5 m) 15 ft (4.5 m)
20” (508 mm) dia. x 1000 RPM 100 HP min. Agitate and pump hog manure * 55 ft (17 m) 15 ft (4.5 m)
28” (711 mm) dia. x 540 RPM 85 HP min. Agitate and pump hog and cow manure * 40 ft (12 m) 15 ft (4.5m)
6 | GEA Farm Technologies The right choice. | 3
Maxi-Pump for solid manure platform
Advantages
• Siphons water alongside the wall of platform to load solid manure with front end loader;
• Reduces the time required to load manure.
Components specifications
• Reinforced 6” (152 mm) suction hose with intake protector;
• 20 feet (6 m) loading pipe.
Low pressuredischarge elbow(in option)
6” (152 mm) rubbersuction hose alone orwith aluminium tube
Advantages
• Powerful surface and bottom agitation forfast mixing of manure;
• A rubber hose between the Maxi-Pumpand the reservoir absorbs vibrations.
Note: The Maxi-Pump can be installedabove ground level to keep environmentclean and help draining the pump oncereservoir is empty.
Components specifications
• Two kinds of 12” (305 mm) intake pipesare available to easily adapt most reser-voirs;
• Hydraulic directional valve to select agi-tation of reservoir or loading of spreader;
• 20 feet (6 m) loading pipe;
• Large operating deck which attaches tothe reservoir at the exact place wanted;
• Rotative valve to select surface or bot-tom agitation without decreasing RPMof PTO shaft;
• Surface nozzle with operating radius of180° horizontal and 60° vertical;
• Bottom nozzle with speed reducer andoperating radius of 180° horizontal.
Rotative select valve canbe switched at full RPM
12” (305 mm) intakegate valve with hoseadapter and flange
12” (305 mm) intakegate valve with 2flanges
“S” sha pe 12” (305 mm)intake pipe to install theMaxi-Pump aboveground
12” (305 mm) intake pipe installedthrough wall of reservoir
4 | GEA Farm Technologies The right choice. | 5
Maxi-Pump and port hole agitator
Advantages
• Positive agitation to minimize solidresidues between the port holes of pit;
• Loading capacity up to 1500 GPM (5 678 L/min.);
• No hose to connect to load the spreader.
Components specifications
• Reinforced 6” (152 mm) suction hosewith intake protector;
• Hydraulic directional valve to select agitation of pit or loading of spreader;
• 20 feet (6 m) loading pipe;
• 6” (152 mm) PVC brown transfer hose(100 PSI);
• Remote agitator (steel or aluminum) thatrotates to help agitation between theport holes of pit.
Hand primer pump with 6”(152 mm) gate valve
Aluminum or steel remoteagitator kit 12’ (4 m) longwith two rotative leversand 3” (76 mm) nozzle
Optional hydraulic motoron primer pump
4 | GEA Farm Technologies The right choice. | 5
Maxi-Pump and port hole agitator
Advantages
• Positive agitation to minimize solidresidues between the port holes of pit;
• Loading capacity up to 1500 GPM (5 678 L/min.);
• No hose to connect to load the spreader.
Components specifications
• Reinforced 6” (152 mm) suction hosewith intake protector;
• Hydraulic directional valve to select agitation of pit or loading of spreader;
• 20 feet (6 m) loading pipe;
• 6” (152 mm) PVC brown transfer hose(100 PSI);
• Remote agitator (steel or aluminum) thatrotates to help agitation between theport holes of pit.
Hand primer pump with 6”(152 mm) gate valve
Aluminum or steel remoteagitator kit 12’ (4 m) longwith two rotative leversand 3” (76 mm) nozzle
Optional hydraulic motoron primer pump
6 | GEA Farm Technologies The right choice. | 3
Maxi-Pump for solid manure platform
Advantages
• Siphons water alongside the wall of platform to load solid manure with front end loader;
• Reduces the time required to load manure.
Components specifications
• Reinforced 6” (152 mm) suction hose with intake protector;
• 20 feet (6 m) loading pipe.
Low pressuredischarge elbow(in option)
6” (152 mm) rubbersuction hose alone orwith aluminium tube
Advantages
• Powerful surface and bottom agitation forfast mixing of manure;
• A rubber hose between the Maxi-Pumpand the reservoir absorbs vibrations.
Note: The Maxi-Pump can be installedabove ground level to keep environmentclean and help draining the pump oncereservoir is empty.
Components specifications
• Two kinds of 12” (305 mm) intake pipesare available to easily adapt most reser-voirs;
• Hydraulic directional valve to select agi-tation of reservoir or loading of spreader;
• 20 feet (6 m) loading pipe;
• Large operating deck which attaches tothe reservoir at the exact place wanted;
• Rotative valve to select surface or bot-tom agitation without decreasing RPMof PTO shaft;
• Surface nozzle with operating radius of180° horizontal and 60° vertical;
• Bottom nozzle with speed reducer andoperating radius of 180° horizontal.
Rotative select valve canbe switched at full RPM
12” (305 mm) intakegate valve with hoseadapter and flange
12” (305 mm) intakegate valve with 2flanges
“S” sha pe 12” (305 mm)intake pipe to install theMaxi-Pump aboveground
12” (305 mm) intake pipe installedthrough wall of reservoir
2 | GEA Farm Technologies The right choice. | 7
Maxi-Pump and side mount agitator kit Maxi-Pump specifications
Standard equipment
• 3 point hitch with adjustable legs;
• 20” (508 mm) diameter impeller with 6blades (see chart below);
• Bearing assembly in oil bath protectedby a greasable 3 seals mechanism;
• Intake flapper valve with thick rubber topositively shut against a stainless steelpipe;
• 6” (152 mm) intake and discharge.
Optional
• Maxi-Pump on trailer;
• Manual primer pump or primer pumpwith hydraulic motor;
• Impeller 28” (711 mm) x 540 RPM or im-peller 20” (508 mm) x 1000 RPM (seechart below).
Maxi-Pump on trailer
Intake flapper closed Intake flapper opened
* The maximum pumping head permitted shown takes consideration of the maximum suction depth. The amount of solids contained in the liquids will progressively reduce the maximum suction depth shown on the chart.
Impeller Tractor UsageMaximum
Pumping headpermitted
Maximum suc-tion depth
(water)
20” (508 mm) dia. x 540 RPM 40 HP min. Pumping water from platforms * 15 ft (4.5 m) 15 ft (4.5 m)
20” (508 mm) dia. x 1000 RPM 100 HP min. Agitate and pump hog manure * 55 ft (17 m) 15 ft (4.5 m)
28” (711 mm) dia. x 540 RPM 85 HP min. Agitate and pump hog and cow manure * 40 ft (12 m) 15 ft (4.5m)
GEA Farm Technologies
GEA Houle Inc.
Manufacturing Plant and Canadian Sales office
4591, boul. St-Joseph, Drummondville, QC, Canada, J2A 0C6
Tel.: 1.819.477.7444 / Fax: 1.819.477.5565
www.geahoule.com
GEA Farm Technologies
GEA Farm Technologies Inc. (Houle)
USA Distributor
1880 Country Farm Drive, Naperville, IL 60563 USA
Tel.: 1.800.563.4685 / Fax: 1.819.477.0486
www.gea-farmtechnologies.com/houle/en
Maxi-Pump
High capacity centrifugal pump
GEA Farm Technologies - The right choice.2014-4
815-0
90 / P
rinte
d in C
anada (V.
05.1
1)
GEA Farm Equipment | Houle
GEA Farm Technologies
GEA Farm TechnologiesThe right choice.