GE FANUC Series 20-FA. B-62174EN_03_070816
616
-
Upload
johnpaulsmith -
Category
Documents
-
view
600 -
download
88
description
Fanuc series 20-FA manual. From 1995. Operators manual.
Transcript of GE FANUC Series 20-FA. B-62174EN_03_070816
Ed. Date Design Description Date 2007.07.11 Desig. Check Apprv.
Sheet
Title
Draw No.
1/3
FS 0i-TA/MA/TB/MB/TC/MC, FS 20-FA/TA, FS 20i-A/B OPERATOR’S MANUAL Addition of caution sentence of “parameter OLV(No.3202#1)”
B-63504EN/01-2, B-63514EN/01-3, B-63834EN/02-2, B-63844EN/02-2, B-64114EN/01-2, B-64124EN/01-2, B-62174E/03-2, B-62204E/02-2, B-63384EN/02-1, B-63374EN/01-2, B-64204EN/01-1, B-64194EN/01-1
FS 0i-TA/MA OPERATOR’S MANUAL FS 0i-TB/MB OPERATOR’S MANUAL FS 0i-TC/MC OPERATOR’S MANUAL
FS 20-FA/TA OPERATOR’S MANUAL FS 20i-FA/TA OPERATOR’S MANUAL FS 20i-FB/TB OPERATOR’S MANUAL
Addition of caution sentence of “parameter OLV(No.3202#1)” 1.Type of applied technical documents
Name
FS 0i-TA OPERATOR’S MANUAL,
FS 0i-MA OPERATOR’S MANUAL,
FS 0i-TB OPERATOR’S MANUAL,
FS 0i-MB OPERATOR’S MANUAL,
FS 0i-TC OPERATOR’S MANUAL,
FS 0i-MC OPERATOR’S MANUAL,
FS 20-FA OPERATOR’S MANUAL,
FS 20-TA OPERATOR’S MANUAL, FS 20i-FA OPERATOR’S MANUAL,
FS 20i-TA OPERATOR’S MANUAL FS 20i-FB OPERATOR’S MANUAL, FS 20i-TB OPERATOR’S MANUAL
Spec.No./Ed. B-63504EN/01, B-63514EN/01, B-63834EN/02, B-63844EN/02, B-64114EN/01, B-64124EN/01, B-62174E/03, B-62204E/02, B-63384EN/02, B-63374EN/01, B-64204EN/01, B-64194EN/01
Ed. Date Design Description Date 2007.07.11 Desig. Check Apprv.
Sheet
Title
Draw No.
2/3
FS 0i-TA/MA/TB/MB/TC/MC, FS 20-FA/TA, FS 20i-A/B OPERATOR’S MANUAL Addition of caution sentence of “parameter OLV(No.3202#1)”
B-63504EN/01-2, B-63514EN/01-3, B-63834EN/02-2, B-63844EN/02-2, B-64114EN/01-2, B-64124EN/01-2, B-62174E/03-2, B-62204E/02-2, B-63384EN/02-1, B-63374EN/01-2, B-64204EN/01-1, B-64194EN/01-1
2.Summary of Change
Group Name/Outline New, Add, Correct, Delete
Applicable Date
Basic
Optional Function
Unit
Maintenance Parts
Notice
The caution sentence of “parameter OLV(No.3202#1)” is added to the following chapters. ・ FS 0i-TA OPERATOR’S MANUAL ・ FS 0i-MA OPERATOR’S MANUAL ・ FS 0i-TB OPERATOR’S MANUAL ・ FS 0i-MB OPERATOR’S MANUAL ・ FS 0i-TC OPERATOR’S MANUAL ・ FS 0i-MC OPERATOR’S MANUAL ・ FS 20-FA OPERATOR’S MANUAL ・ FS 20-TA OPERATOR’S MANUAL ・ FS 20i-FA OPERATOR’S MANUAL ・ FS 20i-TA OPERATOR’S MANUAL ・ FS 20i-FB OPERATOR’S MANUAL ・ FS 20i-TB OPERATOR’S MANUAL III.OPERATION 8.4.2 Outputting a Program
Add Immediately
Correction
Another
Ed. Date Design Description Date 2007.07.11 Desig. Check Apprv.
Sheet
Title
Draw No.
3/3
FS 0i-TA/MA/TB/MB/TC/MC, FS 20-FA/TA, FS 20i-A/B OPERATOR’S MANUAL Addition of caution sentence of “parameter OLV(No.3202#1)”
B-63504EN/01-2, B-63514EN/01-3, B-63834EN/02-2, B-63844EN/02-2, B-64114EN/01-2, B-64124EN/01-2, B-62174E/03-2, B-62204E/02-2, B-63384EN/02-1, B-63374EN/01-2, B-64204EN/01-1, B-64194EN/01-1
In "Outputting a Program", the following CAUTION is added.
Outputting a Program CAUTION When parameter OLV(No.3202#1) is 0, please note that the selected
program number for foreground operation is changed by deleting the program or outputting all programs. Please confirm the selected program number for foreground operation before the program is executed.
