GD KP $KT-08-HAUPTKATALOG-$KP-MONTAGETEILE-$PG-S4 … · PDF created with pdfFactory Pro trial...

Threaded rodsstrength class 4.6, galvanised

Thread Length [m]

Part no. Sales unit Pack unit

M6 1 113603 100 pieces2 113612 50

M8 1 1136392 113651 253 113660

M10 1 1134672 1134863 113495 20

M12 1 1135132 113525 103 113534

M16 1 1135492 1135613 113567 5

M20 1 1135792 113582

Threaded pinsgalvanised

Connecting thread Length [mm]


M6 25 114094 100 pieces40 11409770 11409980 114103

100 114082M8 20 114149

30 11418440 11421150 11422360 11424170 11425380 11426290 114271

100 114115110 114118120 114128140 114137160 114140180 114143

M10 25 11376235 11379255 11382580 113858

100 113699120 113714140 113723160 113729180 113744

M12 25 11394255 11398380 114001

100 113882130 113900150 113915

M16 60 114058 25120 114016160 114031250 114046

ðí

ñïí

ëñì w

PDF created with pdfFactory Pro trial version www.pdffactory.com

http://www.pdffactory.com


Hexagonal nutsDIN 934, galvanised

Thread Nut height [mm]

Spanner size [mm]


M6 5.0 10 105484 100 piecesM8 6.5 13 105498

M10 8.0 17 105433M12 10.0 19 105447M16 13.0 24 105460M20 16.0 30 105469 25

Hexagonal nutsself-locking plastic ring, DIN 985, galvanised


Spanner size [mm]


M6 4.0 10 105525 100 piecesM8 5.5 13 105531

M10 6.5 17 105511M12 8.0 19 105517

Cap nutsDIN 1587, galvanised


Spanner size [mm]


M8 15 13 117119 100 piecesM10 18 17 117060M12 22 19 117069M16 28 24 117080 50M20 34 30 117086 25M24 42 36 117089 5

Protection capsfor the protection of threaded ends, with inner hexagon, plug on, black

For hexagonal nuts Part no. Sales unit Pack unit

M8 105994 100 piecesM10 105996M12 105998

ðí

ñïí

w ó ß ½±²½»°¬ º±® °®±¹®» ¿²¼ ¯«¿´·¬§ ëñïç




WashersDIN 125, galvanised

For thread Outer diameter [mm]

Thickness [mm]


M6 12 1.6 127307 100 piecesM8 16 127310

M10 20 2.0 127277M12 24 2.5 127286M16 30 3.0 127295

Washersfor MPC-Support channels, galvanised

For thread Outer diameter [mm]

Thickness [mm]


M6 24 2 127244 100 pieces36 127184

M8 24 12725336 127214

M10 24 12707929 12708836 127121

M12 127151M16 40 3 127169

ðí

ñïí

ëñîð w




Threaded rodsstrength class 4.6, galvanised

Thread Length [m]


M6 1 113603 100 pieces2 113612 50

M8 1 1136392 113651 253 113660

M10 1 1134672 1134863 113495 20

M12 1 1135132 113525 103 113534

M16 1 1135492 1135613 113567 5

M20 1 1135792 113582

Threaded pinsgalvanised



M6 25 114094 100 pieces40 11409770 11409980 114103

100 114082M8 20 114149

30 11418440 11421150 11422360 11424170 11425380 11426290 114271

100 114115110 114118120 114128140 114137160 114140180 114143

M10 25 11376235 11379255 11382580 113858

100 113699120 113714140 113723160 113729180 113744

M12 25 11394255 11398380 114001

100 113882130 113900150 113915

M16 60 114058 25120 114016160 114031250 114046

ðí

ñïí

ëñì w




Type Connecting thread

Overall height L

[mm]

Threaded length L1

[mm]from the vertical

Height adjust-ment up to

[mm]


Short M8 34 14 up to 12° 120231 100 piecesM10 35 17 120227 50

Long, with inspection hole

M12 70 19 25 120211M10 61 57 120208

17 120204M8 60 14 120223M10 61 17 up to 22° 120196

For secure tilt-free pipe guides two swivel hangers – one at the top and one at the bottom – must be considered for each attachment point.The threaded rod must be secured against loosening by the use of locknuts.

Swivel hanger, longSwivel hanger, short

long versionshort version

Features º·®» °®±¬»½¬·±²

½»®¬·º·»¼

Óïð ó Óïî

Connecting thread Max. recommended load [N]

M8 2,400M10 3,000M12 3,500

galvanisedSwivel hangers

Field of application Attachment solution for suspended pipes – allows axial and lateral pipe movements Attachment of pipes with thermal, axial expansion Especially suitable for large ceiling distances

Advantages 360° degree of freedom Appropriate threaded rod lengths allow the pipes to be set to the desired height Screw-in depth of thread hanger allows precise height adjustment Screw-in depth visible through inspection hole (long version) Short version for low overall height

ðí

ñïí

êñïî w




Steel anchorSteel anchor with collar

Steel anchorSteel anchor with collar

galvanisedSteel anchors

Field of application For anchorages of medium-weight loads in concrete and natural stone (hard) in dry interiors of buildings Versatile and suitable for attach-ment with screws or threaded rods in all plumbing, heating and ventila-tion installations

Advantages Secure grip due to controlled splay-ing as the taper is driven in Requires only small drilling depth building material Secure expansion force even when the mounting screw is loosened European Technical Approval (ETA) for non-cracked and cracked con-crete (reduced loads) If used the setting tools for check marking, test loading of the anchor is not required

Features

Multiple attachment of non-load bearing

systems ETA approval

Non-cracked concrete, centrally

tensile loaded ETA approval

Connecting thread

Anchor length L

[mm]

Part no. Sales unit

Pack unit D

[mm]

Usable thread length [mm]

Drilled hole

depth h0 [mm]

Approved load 1) [kN]

Drilled hole

depth h0 [mm]

Approved load 2) [kN]

Steel anchor M6 30 129092 100 pieces 8 13 30 1.2 30 3.3 3)

M8 129093 10 1.7 2.8 3)

40 129088 20 40 2.0 40 3.6M10 129089 12 15 5.1M12 50 129090 50 15 18 50 2.4 50 7.1M16 65 129091 25 20 23 65 6.3 65 10.5

Steel anchor with collar

M8 30 149067 100 10 13 30 1.7 30 2.8 3)

40 150703 20 40 2.0 40 3.6 3)

M10 30 149068 12 12 30 30 3.3 3)

40 149325 15 40 40 5.1 M12 50 150704 50 15 18 50 2.4 50 7.1

1) into consideration. The European Technical Approval 05/0161 shall be observed for dimensioning.2)

Technical Approval 05/0160 shall be observed for dimensioning.3) Only for use in statically indeterminate systems.

·For the stainless steel version please refer to chapter „Stainless steel“. Please refer to the "Technical information" chapter for additional characteristic values, of plugs.

ßÐÐÎÑÊÛÜº±® Óïð�Óïî

º·®» °®±¬»½¬·±²

½»®¬·º·»¼ Úçð

ðí

ñïí

ïíñî w




FeaturesßÐÐÎÑÊÛÜ

º±® Óïð�Óïî

º·®» °®±¬»½¬·±²

½»®¬·º·»¼ Úçð

Óè�Óïê

Type Connecting thread

Clamping thickness t [mm]

Overall length L [mm]


M6 67 129513 pieces129514

M8 129516129517129519129490129491129493129499129502129505129506129495129496129497129498129500129501129511129512129507

· Please refer to chapter "Stainless steel" for the stainless steel version.

galvanisedThrough anchors

Field of application For anchorages of medium-weight loads in non-cracked concrete Attachment of metal and wood constructions, handrails, shelves and cable ducts Also applicable in hard natural stone

Advantages Quick handling: simply insert and tighten

Splaying controlled by the tighte-ning torque High security due to increasing splaying with increase in load European Technical Approval (ETA) for non-cracked concrete

ðí

ñïí

ïíñì w




Uncracked concrete with central tensile load

ETA approval

Type Drill diameter d[mm]

Drilled hole depth [mm]

Standard anchoring depth hef

[mm]

Setting depth hs [mm]

Approved load [kN]

6

8

1)

Technical Approval shall be observed for dimensioning.

· Please refer to chapter "Technical information" for additonal characteristic values of plugs.

galvanisedThrough anchors

ðí

ñïí

w ó ß ½±²½»°¬ º±® °®±¹®» ¿²¼ ¯«¿´·¬§ ïíñë




Threaded pipesgalvanised

Thread Length [m]


½ 2 113390 5 pieces¾ 1134261 113375

Hanger bracket for quick hooking-in, with height adjustment, galvanised

For threaded rods

Max. recommended load [N]


M8–M12 1,200 106350 50 pieces

Washer for hanger bracketfor use with threaded rods or threaded pins M8, galvanised

Dimensions [mm]


8.5 x 20.5 x 2 127232 100 pieces

ðí

ñïí

ëñïð w




Base plates with hexagonal nutgalvanised

Size L x b x s

[mm]

Connection socket

Oblong holes V

[mm]

Hole-centre distance C

[mm]


Size 1 (80 x 30 x 3)

M8 9 x 16 54 112407 50 piecesM10 112395M12 112401

Size 2 (120 x 40 x 4)

M8 11 x 19 80 112467M10 112451M12 112459M16 112463

Base plates with combination nutgalvanised

Size L x b x s

[mm]

Connecting nut with

dual-thread

Oblong holes V

[mm]


[mm]


Size 1 (80 x 30 x 3)

M8/M10 9 x 16 54 112397 50 pieces

Base plates with connection socketgalvanised

Size L x b x s

[mm]

Connection socket [inch]

Oblong holes V

[mm]


[mm]


Size 1 (80 x 30 x 3)

½ 9 x 16 54 112389 50 pieces

Size 2 (120 x 40 x 4)

11 x 19 80 112435¾ 112443

Base plates welded aroundgalvanised

Size L x b x s

[mm]


Oblong holes V

[mm]


[mm]


Size 2 (120 x 40 x 4)

½ 11 x 19 80 112807 50 pieces¾ 1128091 112805

Base plates with connection socket with four mounting holes, galvanised

Size L x b x s

[mm]



Size 3 (100 x 60 x 4)

½ 112825 50 pieces¾ 1128291 112817

ðí

ñïí

w ó ß ½±²½»°¬ º±® °®±¹®» ¿²¼ ¯«¿´·¬§ ëñç




[mm]

Part no.

27/18 1,000 129883 252,000 1299116,000 130003 1

28/30 2,000 118590 83,040 118692 14,000 118822 86,000 118994 1

38/24 2,000 139920 106,000 139922 1

galvanisedMPC-Support channels

Field of application

Advantages

ðí

ñïí

ìñî w




galvanisedMPC-Hammer head fasteners

Field of application -

Advantages

27/18 and 28/30

Features º·®» °®±¬»½¬·±²

½»®¬·º·»¼

íèñìð

For support channels


Usable thread length [mm]


27/18, 28/30 M8 20 7 115129 100 pieces30 15 11515240 25 11516650 35 11517560 45 11517870 55 11518180 65 11519090 75 115193

100 85 115113120 105 115116140 125 115119160 145 115122180 165 115125

M10 35 18 115104M8 25 7 115056 50

35 20 11507440 25 11508050 35 11509280 65 115101

100 85 115035120 105 115038140 125 115041160 145 115044180 165 115047

M10 35 18 11499055 35 11499980 60 115002

100 80 114963120 100 114966140 120 114969160 140 114972180 160 114975

M12 35 15 115014

ðí

ñïí

w ó ß ½±²½»°¬ º±® °®±¹®» ¿²¼ ¯«¿´·¬§ ìñïé




For support channels Max. allowable bearing point load

capacity of channel[N]

MPC-Hammer head fasteners

Connecting thread Max. recommended tensile load FZ

[N]

Max. recommended transverse load FQ

( displacement)[N]

For a tightening torque of

[Nm]

27/18 1,700 M8 1,000 400 10M10 1,700 1,200 30

28/30 2,500 M8 1,000 400 10M10 2,500 1,200 30

For support channels Max. allowable bearing point load

capacity of channel[N]

MPC-Hammer head fasteners

Connecting thread Max. recommended tensile load FZ

[N]

Max. recommended transverse load FQ

( displacement)[N]

For a tightening torque of

[Nm]

38/24 2,200 M8 1,000 600 20M10 2,200 800 30

38/40 5,000 M8 2,500 1,000 20M10 2,800 1,100 30M12 5,000 1,200 40

39/52 6,700 M8 3,000 1,000 20M10 3,300 1,100 30M12 6,700 1,200 40

40/6040/80

8,300 M8 3,500 1,000 20M10 4,000 1,100 30M12 8,300 1,200 40

38/80 5,000 M8 2,500 1,000 20M10 2,800 1,100 30M12 5,000 1,200 40

40/120 8,300 M8 3,500 1,000 20M10 4,000 1,100 30M12 8,300 1,200 40

MPC-Hammer head fastenersgalvanised

ðí

ñïí

ìñïè w




Features

[mm]Part no.

H1 b C V

27/18 200 118562 25 120 40 4 80300 118656500 118888

28/30 240 118602400 118771

38/40 160 118518 30 6240 118604320 118704 25400 118775480 118849560 118908 20640 119006 10720 119050800 119072 1

1,040 11845340/60 560 118940 200 100 8 155

640 119029800 119090

1,040 11846538/80 400 118807

800 119087

galvanisedMPC-Wall hanger brackets

Field of application Advantages

º·®» °®±¬»½¬·±²

½»®¬·º·»¼

º®±³ íèñìðô «° ¬± éîð ³³ ´±²¹

ðí

ñïí

w ó ß ½±²½»°¬ º±® °®±¹®» ¿²¼ ¯«¿´·¬§ ìñé




Max. load capacities:

[mm]

27/18 200 526 263 263 175300 350 143 175 116500 163 50 76

28/30 240 1,317 658 658400 787 262

38/40 160 1,532240 3,062 1,531 1,531 1,020320 1,147 1,147 764400 1,832 610480 1,524 762 762 508560 1,304 612 652 434640 1,138 467720 367 504 336800 444 287

1,040 171 257 16640/60 560 3,613 1,806 1,806 1,204

640 3,156 1,578 1,578 1,052800 2,514 1,242 1,257 838

1,040 72738/80 400 5,465 2,732 2,732 1,821

800 2,711 1,355 1,355

MPC-Wall hanger bracketsgalvanised

ðí

ñïí

ìñè w




MPC-Rail nutsgalvanised

For support

channels

Thread Length [mm]

Width [mm]

Height [mm]


27/18, 28/30

M6 21.5 11.5 4 118013 100 piecesM8 14.0 5 120043

38/24, 38/40, 39/52, 40/60, 40/80, 38/80, 40/120

M6 32.8 20.0 148759M8 33.0 23.0 6 118040

30.0 11.5 118067M10 33.0 23.0 117968M12 117986M16 33.0 9 117998 25

Size 38/24 to 40/120

Size 27/18 to 28/30

MPC-Double rail nutgalvanised

For support channels Part no. Sales unit Pack unit38/24, 38/40, 39/52, 40/60,

40/80, 38/80, 40/120117944 50 pieces

galvanised

For support channels For thread Part no. Sales unit Pack unit27/18, 28/30 M8 114439 100 pieces

M10 11450338/24, 38/40, 38/48,

38/80M8 114447M10 114450

39/52, 40/60, 40/80, 40/120

M8 114471M10 114474M12 114477M16 114459 25

MPC-Clamp bracket heavy-dutyto transfer large forces, galvanised

For support channels For thread Part no. Sales unit Pack unit39/52, 40/60, 40/80,

38/80, 40/120M10/M12 114557 25 pieces

MPC-Protection caps

For support channels Part no. Sales unit Pack unit27/18 106000 100 pieces28/30 106002

38/24, 38/48 10600438/40, 38/80 106006 50

39/52 10600740/60, 40/120 106008 25

40/80 106009

MPC-Clamp brackets

For support

channels

Thread Length [mm]

Width [mm]

Height [mm]


27/18, 28/30

M6 21.5 11.8 4 118013 100 piecesM8 14.0 5 120043

38/24, 38/40, 39/52, 40/60, 40/80, 38/80, 40/120

M6 31.0 16.0 6 14875732.8 23.0 148759

M8 31.0 16.0 14876132.8 23.0 118040

M10 31.0 16.0 14785432.8 23.0 117968

M12 117986M16 32.5 32.5 8 148762 25

ðí

ñïí

ìñîð w

º·®» °®±¬»½¬·±²

½»®¬·º·»¼

íèñìð




GD KP $KT-08-HAUPTKATALOG-$KP-MONTAGETEILE-$PG-S4 … · PDF created with pdfFactory Pro trial...

Documents

Transcript of GD KP $KT-08-HAUPTKATALOG-$KP-MONTAGETEILE-$PG-S4 … · PDF created with pdfFactory Pro trial...