GCS (Above Mount)
1
>Max kg/lbs >60° >60° >60° A E B C D GCS (Above Mount) Quick – simple and secure attachment to channel with a 3/16” hex key Universal – secures up to 6” OD piping systems, eliminating the need to stock multiple pipe clamps Versatile – suitable for mechanical piping and plumbing applications including HVAC refrigerant piping, VRF systems, medical gas, and domestic water Strong – can be used to rack piping (refer to strut manufacturer for point loads) Robust – secure fit to strut using the hex key allows safe transit of pre-built racks from off-site pre-fabrication shop to the job site Safe – stainless steel securing strap with non-conductive coating to prevent galvanic corrosion between dissimilar metals Adjustable – prior to final lock, button release allows easy adjustment or addition of insulation after installation Gripple Inc | 1611 Emily Lane | Aurora, IL 60502 | USA Tel +1 866 474 7753 Fax +1 800 654 0689 Email [email protected] SPECIFICATION FEATURES / BENEFITS Versatile pipe clamp solution designed for use with standard strut channel profiles to secure up to 6” OD piping systems in multiple mechanical and plumbing applications. INSTALLATION & ADJUSTMENT 2. 1. 3. 4. 5. 6. Always support load before adjusting. Suitable for use with pipe sizes up to 6” SUBMITTAL INFORMATION Load Rating: Above-Mount (Racked) - Refer to strut channel manufacturer Material: Housing – ZA2 Zinc Cover – 30% glass filled PP Rubber Pad – EDPM Wedge – Sintered steel hardened to min 50 Rockwell C Spring Release Cartridge: Acetal Locking Screw: Type ZA2 zinc Strap: Stainless steel with non-conductive coating Approvals: UL listed UL2239 – Hardware for the support of conduit, tubing & cable – project file E251132 UL listed UL2043 – Plenum rating ICC - PMG-1320 Pipe Support & Hanging System IAPMO - UEL 5030 – Pipe, duct & conduit supports & suspension hangers A (in) B (in) C (in) D (in) E (in) GCS-24 25.5 1.37 1.7 0.92 2.4 www.gripple.com Gripple’s policy is one of continuous development and innovation. We therefore reserve the right to alter specifications, etc. without notice. PI-GCS-US-24IN Published Aug 2020 3/16” or 5mm hex key required TORQUE MAX 11lb-ft
Transcript of GCS (Above Mount)
>Maxkg/lbs
>60°
>60° >60°
A
E
B
CD
GCS (Above Mount)
Quick – simple and secure attachment to channel with a 3/16” hex keyUniversal – secures up to 6” OD piping systems, eliminating the need to stock multiple pipe clampsVersatile – suitable for mechanical piping and plumbing applications including HVAC refrigerant piping, VRF systems, medical gas, and domestic waterStrong – can be used to rack piping (refer to strut manufacturer for point loads)Robust – secure fit to strut using the hex key allows safe transit of pre-built racks from off-site pre-fabrication shop to the job siteSafe – stainless steel securing strap with non-conductive coating to prevent galvanic corrosion between dissimilar metalsAdjustable – prior to final lock, button release allows easy adjustment or addition of insulation after installation
Gripple Inc | 1611 Emily Lane | Aurora, IL 60502 | USA Tel +1 866 474 7753 Fax +1 800 654 0689 Email [email protected]
SPECIFICATION
FEATURES / BENEFITS
Versatile pipe clamp solution designed for use with standard strut channel profiles to secure up to 6” OD piping systems in multiple mechanical and plumbing applications.
INSTALLATION & ADJUSTMENT
2.1. 3. 4. 5. 6.
Always support load before adjusting.
Suitable for use with pipe sizes up to 6”
SUBMITTAL INFORMATION
Load Rating:
Above-Mount (Racked) - Refer to strut channel manufacturer
Material:Housing – ZA2 ZincCover – 30% glass filled PP Rubber Pad – EDPMWedge – Sintered steel hardened to min 50 Rockwell CSpring Release Cartridge: AcetalLocking Screw: Type ZA2 zincStrap: Stainless steel with non-conductive coating
Approvals:UL listed UL2239 – Hardware for the support of conduit, tubing & cable – project file E251132 UL listed UL2043 – Plenum ratingICC - PMG-1320 Pipe Support & Hanging SystemIAPMO - UEL 5030 – Pipe, duct & conduit supports & suspension hangers
A(in)
B(in)
C(in)
D(in)
E(in)
GCS-24 25.5 1.37 1.7 0.92 2.4
www.gripple.comGripple’s policy is one of continuous development and innovation. We therefore reserve the right to alter specifications, etc. without notice.
PI-GCS-US-24IN Published Aug 2020
3/16” or 5mm hex key required
TORQUE MAX 11lb-ft
