Gb chem 12th workshop

1. Welcome to GB Chem 12th Workshop
We Produce innovative unique tailor made
Chemicals & Pigments for all Industries

Recent Certificates

Renew Certificates
Oeko standard 100
Reach certificate
GOTs certificate
3. Pretreatment
4. Potential products for pretreatments :
1 -
2-

3-
4 -
5-
GBdetergent OS Conc
Is one shot product for Pretreatment Co & Co blends exhaust as well as continuous , and has very good emulsifying,
dispersing and stabilizing properties in peroxide bleachinghas a strong detergent and wetting action
GBdetergent High Conc / 3D
Nonionic wetting, peneterating & foam suppressant economical for all process & reduce silicon precipitation
in finishing liquor.
GBdetergent SRM Conc
Wetting agent and defoamer for the textile industry. This productincreases the liquor pick-up in padding processes.
GBdetergent GB Conc
low-foaming detergent and wetting agent, APEO-free , with an emulsifying and extractive action , used in pretreatment processes to mobilize and removethe impurities present in cotton.
GBstabilizer PL NEW
Organic Peroxide stabilizer with a dispersing a action, for bleaching cellulosic fibers in long liquors & continuous process.
5. GBwetting MC
6-
Universally applicable, economical low foaming padding auxiliary for continuous and semi continuous dyeing
processes, wettingand deairating agent for dyeing from long liquors; for dyeingcellulosic fibers and their blends.
GBlubricant JET
7-
Universal lubricant and crease inhibitor for textile processing in rope dyeing machines:
improves running properties
protects the fabric surface
prevents running creases
Auxiliary for increasing liquor pickup in padding processes.
GBscour KB
8-
Non-surface-active auxiliary for the alkaline pretreatment of different cellulosic fibres, particularly grey cotton, alone and in blend with synthetic fibres, high degree of absobance& whiteness plus prevention of oxycellulose formation, not to be used with H2O2
9-
GBmercerizing MC
Wetting agent for mercerising and causticising cotton in the form of woven and knitted fabrics and yarn
GBsequestering TA-S
10-
Complexing agents for the textile industryBioeliminable; the decomposition products formed are non-toxic to fish and micro-organisms.
6. Classical exhaust recipe
Single stage bleach for full white CO (exhaust)
98 C for 60 minutes
Rinse overflow x 2
at 80 C for 10 minutes
Acid neutralization
to pH 5-5,5
80 C
50 C
Load
Please, note addition of GBkol SN increase wettability & whiteness by removingoliffen, paraffins,waxes from fabrics
For heavy material its advisable to use GBlubricantJet 1 3 g/L
7. Cold Pad Batch
Cold bleaching with hydrogen peroxideIntensive washing
Intensive washing
8. Continuous recipe ( one shot product )
*Recipe 1
For bleaching fabrics that have been desized and given an alkaline pretreatment
**Recipe 2
( for very bad quality of Cotton , i.e. dark yellow fabrics)
A-Oxidative desizing/boiling-off
9. B- Bleach
-Intensive washing :for recipes 1,2 gives better results as follows
10. Bleaching for full White Cotton(one shot product) exhaust recipe :
1: GBdetergent OS Conc addition and loading
of machine
2: NaOH addition
3: H2O2 addition
4: Heating to 95 C
5: Bleaching for 30 45 min
6: Cooling down, overflow, rinsing
7: Neutralizing
8: GBperoxide killer Enzymes
9: Rinsing
11. Brilliant solution to common technical problems

A- Granting excellent wettability & same reproduability& repeatability
Hence same absorbancy & dyeing shades.

Using0.5 g/l GBdetergent OS Concin exhaust
6-8 g/l in continuous bleaching

B. Using GBscour KB for treatment of very bad quality of cotton ( Dark Yellow fabrics)

C.Using more GBdetergentSRM Concwill kill foam existence.

D. Using GBkol SN e.g. 0.5 g/L duringwashing off will increase wettability and whiteness .

E. For heavy matrial in order to prevent marks its essential to
use GBlubrcant Jet 1-3 g/L.
12. Complexing capacity for CaCO3
- at pH 11
- 1 dH = 10 mg CaO / l water = 17.9 mg CaCO3 / l water
- Conclusion the highest ecological chemistry & the best complexing
capacity for CaCO3 is nitrilotriacetic acid Trilon TA/ GBsequesteringTA-S
13. Dyeing
14. Potential products forDyeing :
1 -
2-

3-
4 -
5-
GBcid AS
Mixture of organic acids for use in dyeing and printing.
GBreduction Clearing ECO.
Liquid reducing agent for clearing dyeings on polyester, polyacrylonitrile, cellulose acetate and blends of these. For use in dyebaths in the acidic range.
GBojet PELS/NEW
APEO-free combined dispersing and levelling agent for dyeing PES fibres with disperse dyes under HT
conditions & replacing carrier. greatly reduces deposition of PES oligomers on fibers and in dyeing
machines (one shot product).
GBleveler SFD/NEW
APEO-free levelling agent for dyeing polyester fibers under HT conditions,ensuresuniform exhaustion of disperse dyes and promoteslevelling-out in the HT phase and penetrating agent in printing e.g flag printing.
GBkolkintleveler/SN2
-One shot very concentratedin Viscose pastyform, easily dissolved in hot water.High dispersing effect.
-Protective colloid &-High sequestering power.
Used for after treatment of reactive dyeing & printings
15. Potential products forDyeing :
6 -
7-

8-
9-
GBojet BDS
Very economical dispersing,and buffering versatile multi .purpose liquid auxiliary for use in polyester dyeing etc.
GBvat leveler P liquid
Leveling agent for vat dyes improves the levelness of exhaust dyeings with vat dyes on cellulosic fibers, generally without affecting the colour yield.
GBdispersing BL
All-purpose, liquid dye-dispersingagent
GBantimigrating AM
Padding auxiliary for continuous dyeing of piece goods composed of cotton, polyester, and polyester/cotton blends
16. Wool Nylon local Auxi
GBantibackstaining
Aftersoaping agent for the removal of reactive
dyes hydrolysate or unfixed direct dyes from
dyeingson cellulosic material as well as all
types of dyes e.g. disperse dyes from PES/CO,
denim . Etc.
GBcid AS
GBdetergent SRMD
Mixture of organic acids for use in dyeing
and printing.
GBLeveler WO PA
Nonionic wetting & detergent .
GBsilicon MM
Versatile dyeing auxiliary for WO/PA
as a levelling agent and for improving the rub fastness of dyeings with
metal-complex dyes on wool and of dyeings on half-wool & nylon
for degreasing and scouring textiles in acid dyebaths
as an auxiliary in one-bath bulking and prescouring of high-bulk acrylic yarns
as a levelling and penetrating agent for dyeings with direct and basic dyes
as an aftertreating agent for improving the rub fastness of vat dyeings and removing pigment deposits
as an addition to the developing liquor and aftersoaping bath of Naphthol AS dyeings to obtain good rub fastness
for degumming silk and instead of degumming soap in silk dyeing
Silicone-based softener and additivefor
the finishing of textiles ( Semi Micro gives
very smooth handle ).
17. Dyeing 100 % cotton dark Shade Process
(6 hours instead of 8 hours)
18. PES Dyeing Recipe By GBojetPELS / New
Jets,Luspels & Cones
GBojet PELS / new
6 g/LHydrosulfite Conc. BASF
12 g/LNaOH 38 Be
3 - 4 %GBojet PELS/ new
45 120

GBojetPELS/ New
!!
19. Pigment dyeing without finishing

Liquor pick-up : As low as possible ( 65 % for Co fabric )
Drying : 120 C
Curing : 5 min at 150c

Primary trials must be carried out before production
20. GBreduction Clearing ECO
After treatment agent for PES dyeing
.. ..
GBreduction clearing ECO

4 % Dark shades
2 % Medium & light shades
: pH 4.5

.

... ...
No hydro & no caustic soda .saving time
21. *Standard Recipes for Dyeing 100 % PES
*
1- High Temperature Dyeing
* Using 3-4% GBleveler SFD / New
For30min. at 130 0C will level any faulty dyeing.
2- Continuous Dyeing

A.Cotton dyeings
prevent bleeding of poor wash fastness of reactive dyes
Using 1 % GBkolknit leveler/SN
1 % GBwash off co &
( boiling two times for dark shades & one time for med. To light shades)
B.On PES dyeings machines
you will have a clean machine (Huspels, cone,Jets.etc) &No oligomers within machine Pipes.
When
Using 2-4 % GBojet PELS/new
6 g/l HaydrosulphiteConc BASF
12 g/l NaoH 38 Be
For 45min. at 120 C
C.Reductive clearing of PES dyeing
you get excellent reductive clearing of PES dyeing in same acid medium,
reducing time, energy, recommended for dyeing cotton after PES dyeing .etc,no soda &no hydro.
Using 4 % GBreduction clearing Eco for dark shades
2 % GBreduction clearing Eco for medium & light shades
1-3% GBojet PELS/new

At PH 4.5 (GBcid AS)
23. Indantheren dyeing
How to improve the properties of rubbing and washing

Explanation and measures for improving the rubbing fastness
-The rubbing fastness of a dyeing depends less on the dye than on the substrate and depth of shade of the dyeing. Check whether it is dye pigment or fibre material that has rubbed off (magnifying glass!).
-Alkaline earths, introduced by the material or the process water, cause a lower standard of rubbing fastness.
-Unsatisfactory state of the vat at the end of the dyeing process. Indanthren yellow paper must turn to a deflnlte blue shade.
-Softeners can lower the fastness to rubbing.
Recommended dyeing process
Recipe:
Add in following order at 50 C:
2 g/l GBkol SN
2 g/l GBsequestring TA-S
%Indanthren Coll. Dye
ml/l caustic sode 38 Be
1-2 g/lGBvat leveler P liquid
g/l sodium nitrite / glucose *
g/l hydrosulfite conc. BASF
Heat to 60 C and dye 45 min at 60C

*to prevent over-reduction, the following products are added to the dyebath:
60 80 C: 15% sodium nitrite (calculated on the amount of hydrosulfite used)
80 115 C:2-3 g/l glucose 80%
Over-reduction cannot be prevented by sodium nitrite when the dyebath contains
Trilon TB/GBsequestering TBS. In this case, glucose must be used.
24. Printing
25. Potential products forPrinting :
1 -
2-

3-
4 -
5-
Helizarin Binder ET95 + RongalitC + LudigolGrains
GBwhitePast Elastic + GBwhitePast New +GBglitteringPast
Ready to use (Elastic) white paste for pigment printing & for outstanding white especially on dark ground - colored on dark ground - Aqueous compound of a self-cross linking polymer dispersion with additives, used as a base coat in coating textiles of all fiber types and blends. Viscosity can be adjusted with Lutexal HIT. (glittering, silver,golden, metallic, in flock & foil printing.
GBemulsiphier OU
Nonionic emulsifying agents for all branches of the chemical industry and for oil processing.
GBbinder FMD /NEW
Acrylate-based pigment-printing binder for direct, discharge and resist printing. The prints are fast to dry cleaning , have a pleasingly soft handle and excellent all-round fastness properties.
GBresin M70
Crosslinking agent for the finishing of technical textiles. On synthetic fiber material, GBresin M70
produces a resilient stiff finish , Washing finished textile with GBresin M 70 will remove any formaldhyd left on
the fabric .
26. Potential products forPrinting :
6 -
7-

8-
9-
10-
GBemulsfier FSR/ NEW
Crosslink agent containing auxiliary product combination for low- formaldehyde pigment printing, one shot fixing, emulsphier, granting sharp outlining.
GBnaturalThickner FA
Is for all applicationsa natural printing thickener extensively used in printing with disperse dyes, reactive dyes and also suitable for discharge printing with stannous chloride.
GBsyntheticThicknerGP
High-polymer synthetic thickening agent for pigment printing
GBoxidizer liquid
Oxidizing agent for the textile industry, prevent yellaing in dyeing & printing also for bleaching colored yarn fabrics & replacing H2O2 especially for sensitive fabrics.
GBsuper pig (8 colors) powder water soluble
Pigment colors , fast dissolving in all pastes ( highly concentrated ) and it gives better fastness .
( Red - Darkred - Yellow - Blue - Green -Orange -Black -White )
27. Flock printing Recipe
500 gmGBglittering /GBcopolymer
10 15 gmGBresinM70
2 5 gmLutexal HIT / GBsynthicknerGP
(well stir for 5-10 min. to achieve the desired viscosity ) and print twice
& immediately to be taken to the spraying with Flock Powder !!! on Flock Machine
Fixation :
min at 150 c is the ideal ( maybe two /three time passing hot air fixation )
Checkexact fixation time under your condition .
Preliminary trials must be carried out .
28. Ideal water base printing recipe for high ecological & better fastness , meeting ECO standard 100
XXH2O
30 35 gLutexal HIT (GBsyn.thickner GP )
120 160 g Helizarin Binder ET 95
5 10 gGBemulsphire OU
10 20 gGBemulsphire FSR
100 Urea
-------------
1000

Pigment XXorGBsuper Pigment (you can disolve in water before
adding to pig.paste or directly with stiring)

Fixation : 5 min at 150 degree
Before printing : fabric must be very well absorbing water.

*NOTE:
+ you can use GBemulsiphire OU to increase running properties.
+you can use ammonia to prevent screen blocking.
29. Best fastness water base printing recipe
Pig. Stockbase
XXH2O
30 35 gLutexal HIT (GBsyn.thickner GP )
120 160 g Helizarin Binder ET 95
5 10 gGBemulsphire OU
10 20 gGBresin M 70 for better fastness ( wash & rub )
100Urea
-------------
1000

Pigment XXorGBsuper Pigment (you can disolve in water before
adding to pig.paste or directly with stiring)

Fixation : 5 min at 150 degree
Before printing : fabric must be very well absorbing water.

Please wash the discharge printing if you add GBresin M 70 to reduce the amount of formaldhyde if available
30. Pigment Discharge Printing withDecrolin without Steaming

A.Using150g/kg Rongalit C10 min at saturated steam 102 C -105 C
( air free )
together With 15g/kg GBemulsphir FSR will give excellent white discharging
on reactive ground.
B. Using 10-20 g/kgGBemulsphir FSR will give you high sharpness,
excellent
Fixation, lower thickner, more color yield, only one shot product needed beside binder & thickner.
C. prevent yellowing during dyeing & printing & protectreactive against reductive effects & also used for bleaching colored yarn & fabrics.

Using 1-2 g/l Ludigol from dyeing reactive
10g/kgLudigolfor printing reactive
D.GBresinM 70 , Crosslinking agent for the finishing of technical textiles. On synthetic fiber material, GBresin M70 produces a resilient stiff finish , Washing finished textile with GBresin M 70 will remove any formaldhyd left on the fabric.
We have unique innovative brilliant Solution for Printing problems
please cheak our function list& dont hesitate to contact us to send to you our package solution.
just send your Email request, as well as the requiredrecipe here under.

& dont hesitate to contact us to send to you our package solution.
just send your Email request, & visit our web site
32. Printing Polyester / Cottonblend
Stock Paste :
Print Pastes:
Screen print (full shades and reductions1 : 3 -black1 : 9 ) ,dry , hot air fixation 1 minute at200 C ,
- Wash: Good cold rinse , soap first at 60C when at 80C with :
-1-4g/lGBkol Knit Leveler/ SN
- Rinse
33. Acrylic Printing
Printing with Basic dyes, steaming, washing
-Basic dyes are cationic dyes, which give brilliant, strong and fast prints on polyacrylonitrilefibres. Owing to their simple handling, liquid types are generally preferred for textile printing.
Printing recipe:Basic powder types
Basic dyeg / l
Glyezin A ( glycerine)30g / l paste with
GBcid AS 30%30g /l and dissolve with
Boiling water 250g /l
GBnaturalThickner FA 500-600 g
Eluysin S5g
Or GBcid AS
Ammonium sulfate 1:215g
Luprintan PFD30g
GBantifoam2g
1000 g
For Basic liquid types
GBnaturalThickner FA500-650 g
GBcid AS10-20 g
Ammonium sulfate 1:215 g
Luprintan PFD30 g
GBantifoam2 g
Basic dye g
Water or thickening g
1000 g
1- Basic GBcid AS Benzyl alcohol ( )
20-30 GBCID AS
2- 30 / Luprintan PFD
3-
GBdetergent GB Conc (defoaming + dearating + wetting)
34. ( 100% )
On 100% PES light weight
Discharge printing recipe for white and color discharge
Dyeing:
- Dyeing at 120C4% Dischargeable Black (using blue 79 & orange 30& Red 167)
PH 4,55
30 min. at 120C (only)
hot rinse & cold rinsing
dry not more than 100C
Printing

- Light weight material preferably.
- Drying not more than 100C
- No storage
- Prevent from light
- Guar or gem thickeners mixed with starch ether (GBnatural Thicker FA) gives better results for
(good surface printing)
- Decrolin(GBreducing C) is the only reducing agent for white
- RongalitH (GBreducing H) is the only reducing agent for color
- Only for color discharge ludigol OR GBoxidizer liquid should be used.
- GBleveler SFD newis used to intensify the discharge effect
- Steaming 15 min. at 175C HT steam
Wash off:
cold rinse: 10 min. at 20C
Warm rinse:10 min. at 45C
Reduction clearing:10 min. at 60C
2 g/I Hydrosulphite Conc. BASF
4 m/ICaustic soda 38Be
2 g/I GBkol SN/SN2 or GBwsh off CO
- Warm rinse: 10 min. at 60C
Cold rinse
GBcid AS to adjust PH at last rinse.
35. Discharge With Rongalit C
A. Pigment Colored Discharge Printing With Rongalit C
Drying:80 C
Steaming:8 min at102 C - 105 C saturated steam ( air free)
Wash-off:Rinse cold
40-60 C, 2 m/l H2O2
70 C, g/l GBkol knit leveler
Rinse cold and warm

Rongalit C *For pig. Color discharge stability of the reducing power during production is not as good as ( decroline which offer the excellent pig. Color discharge / best stability & constant reducing power. )
36. Wrinkle effect with Pigment Printing
(e.g. Stripes)
Viscosity: 70-80 dpa s
In case of foam you can add GBantifoam
37. Water base ecological ready to use paste
Using:
GBwhit paste new or GBglittering Paste

- stirring well by adding GBsuper pig. Slowly untilyouget the desired colored paste.

- you can adjust the viscosity of the paste by using GBsynthetic thickener and water.

- print & Fix5min at 150 min
Orfix 4 min at 160 min.

Check fastness on white material , e.g. wash & rub fastness

*NOTE:
+ you can use GBemulsiphire OU to increase running properties.
+you can use ammonia to prevent screen blocking.
38. Finishing
39. Potential products forFinishing :
1 -
2-

3-
4 -
5-
GBresin CPN/GBresin ECO/GBresin M70/PC
Crosslinker for the easycare finishing of textiles composed of cellulosic fibres, alone and in blends with synthetics , washing finished textile with GBresin M 70 will remove any formaldhyd left on the fabric .
GBdensolFM
Catalyst for the resin finishing, like Fixapret ECO/Fixapret F-CL & GBresin CPN.
GBpolyetheyen PEP /conc
Smoothing agent and additive, polyethylene based, for textile finishing, excellent sewability.
GBretGB /NEW
Aqueous Polyurethane for finishing textile fabrics giving full & very smooth voluminous handle, Smooth & full handel . Reducing pilling & slipping etc
GBsilicon GB/ME
Silicone-based additive and secondary polyethylene dispersionfor textile finishing.
6 -
7-

8-
9-
Siligen SIE-K/GBsilicon MM
Silicone-based softener and additivefor the finishing of textiles ( Semi Micro gives very smooth handle ).
GBsilicon SKS Plus/ Suppra/ Excell
Silicone-based additive and softener for the finishing of textiles gives volume ,very good smoothness,sewability &reduces antistatic, Smooth handel (it can also be used in exhaust e.g. 1 % ).
GBsiliconSKS New
Silicone-based additive and softener for the finishing of textiles gives, very good soft handle, sewability& reduces antistatic, hydrophilic ( it can also be used in exhaust e.g. 1 % ).
GBsoft NF/GB/D
Economical softener for all fibres alone and in blends for white & colored fabric With very good sewability .
41. * EconomicalFinishing Recipes
Recipe No. 1 ( Smooth handel )
Recipe No. 2( Soft handel ) + hydrophilic
Or GBsoft GB
Recipe No. 3( Smooth & full handel )
* For economical cool touch Smooth, Soft & full handle 20 g/l of each of
GBsiliconSKS Plus / SKS New or GBsoft GB / GBret GB& then Calendaring
* New finishing tastes : GBsilicon Supper GBsilicon Excel
42. *Special Wash fast Finishing recipe for smooth surface
For High quality of cotton
***GBret GB :THEHIGHER AMOUNT THE BETTER RESULTS.
* Dp (degree of smoothness ) of 3-3,5
Remakrs:
Possibilities how to improve handle like cool touch
Residual moisture on fabric should be as high as possible before calendaring
- Calendaring should be carried out at a temperature higher than 100 C , Pressure more than 60 N/mm.
43. Classical & EconomicalWash fast Finishing recipe
***GBret GB :THEHIGHER AMOUNT THE BETTER RESULTS.

FOR SHIRT- WE RECOMMEND STARTING FROM 10-20 G / L.
PANTS-WE RECOMMEND STARTING FROM 40-60 G / L.
44. High degree of smoothness for Wool
( )
We dissolve THE Chemicals in 1 to 10 water & sieve before USE
Recipe G / L :
pH6 by Eulysin S/ GBcid FM/AS

Pick up : 70 %

Process :
12% residual moisture, Curing at 140 deg C x 4-5 min.

Decatizing ( sanforizing or calendaring )
Results:
dp (degree of smoothness ) of 3.5-4
45. Hard paper like touch on PES Material
46. WRINKEL FREE RECIPE APPLIED ON Stenter for T-shirt & Pantsetc
( )
Pretreatment :
1- WASHING 2 GM/L GBdetergent High Conc/3D FOR 10 MIN. AT 80 DEG.
2- OVER FLOW RINSING & ADDING 1 CC /L Eulysin S/GBcid FM/AS
3- COMPLETE DRYING
THEN.
We dissolve THE CHEMICALS in 1 to 10 water & sieve before adding into Tank.
Finishing Recipe/L :
Results:
DP (degree of smoothness ) of 4 4.5
pH 5.5 - 6 by Eulysin S or GBcid FM/AS is a must
Process :
-Possibilities how to improve handle like cool touch
-Residual moisture on fabric should be as high as possible before calendaring.
-Calendaring should be carried out at a temperature higher than 100C, pressure more than 60 N/mm
Curing : 45s at 170C
47. WRINKEL FREE RECIPE APPLIED ON GARMENT WASHING MACHINE
( )
Pretreatment :
-WASHING 2 GM/L GBdetergent High Conc/3D FOR 10 MIN. AT 80 DEG.
-OVER FLOW RINSING & ADDING 1 CC /L Eulysin S/GBcid FM/AS
-COMPLETE DRYING
THEN
We dissolve THE CHEMICALS in 1 to 10 water & sieve before adding
IN anotherNEW GARMENT WASHING MACHINE.
(Take into consideration liquor ratio 1:10 i.ewight of pants or T-shirt :total liquor.)
Finishing Recipe / L :
pH 4 - 4.5 by Eulysin S or GBcid FM/AS

Process :
Complete Garment Dipping (25 mins.), hydro-extraction, tumble dry at 90 deg C to 12% residual moisture, garment pressing, Curing at 140 deg C x 6 min.

Results:
DP (degree of smoothness ) of 3.5 - 4
We will get minimum dp 0.5 more if we add 50 g/l Perapret PU new &
5 g/L GBdetergent High Conc/3D & pH must be 6 when using PU.

Above mentioned exhaust process are carried out under the complete responsibilities of the Customers
e.g.: Chaps Successful production at Swiss Garment EGYPT
48. Luster on Jeans
Then
49. Miscellaneous
50. Potential products forMiscellaneous:
1 -
2-

3-
4 -
5-
GBbiopolish/ Peroxide Killer / DesizingEnzymes
Catalase enzyme / especial finishing process & reduce pilling / Decompose starch size from fabrics by the enzymatic reaction
GBphoreSFN / SFN S3 / PES-CO / CA-SB
Conc. Bluish fluorescent brightener for polyester fibers and their blends.
GBantibackstaining
Aftersoaping agent for the removal of reactive dyes hydrolysate or unfixed direct dyes from dyeings
on cellulosic material as well as all tyes of dyes e.g. disperse dyes from PES/CO, denim . Etc.
GBlanon Wash Off CO
Aftersoaping agent for the removal of reactive dyes, hydrolysate or unfixed direct dyes from dyeings on cellulosic material as well as all tyes of dyes e.g. disperse dyes from PES/CO, denim . Etc
GBantifoamConc
Is a very strong, polar solvent which can be used as an antifoam agent, in hydraulic fluids, extraction agents and
for the production of plastics.
6 -
7-

8-
9-
10 -
11-
GBcoplymer / Soft Tacky Free / Soft Tacky / Hard free
Wash fast finishing agent .it's used as soft filing .binder and coating agent for Non-woven, needle felts and carpets. Adhesive for industrial applications.
GBstain Repellent FC
Phobic agent for hydrophobic, oleophobic and dirt-repellent finishing of textiles.
GBstripper & leveler A
Dye-affinitive stripping , afterwashing and levelling agent
GBadhesive Paste
Adhesive Paste for all perpose usage.
GBsizeEco
Water-soluble sizing agent for polyester filament yarns .
GBacarylicRetarder
Versatile retarder in the dyeing of polyacrylonitrle fibers with cationic dyes.
52. GBphorPES Co
Fluorescent brightener for polyester- cellulosic blends gives same hue on PES & Co blends during bleaching of cotton .
One-step bleaching and
brightening of PES/CO
blends
Liquor ratio 10: 1-20: 1
60 min at 98 C
Dry for 60 s at 100C
53. Economical optical Brightener recipe for PES
GBphor SFN S3Can be supplied bluish or neutral
54. Economical optical Brightener recipe for PES
55. GBcopolymer
Up-to-date adhesive & filling (not PVA Base) soft handle & transparent surface for textile & non textile application .
Recipe :For textile industries:
Application examples :
*Finish of 100% cotton, dralon fabric
50 gm/lGBcopolymer
15 gm/lGBsilicon SKS Plus
**Finish of furnishing fabric
20 gm/l GBcopolymer
15 gm/l GBret GB
10 gm/l GBsoft GB
***Finishing fur imitation
80 gm/lGBcopolymer
100 gm/lKaurit M70
20 gm/l GBdensol FM
56. RECIPE FOR ALUMNIUMFOIL COATING

100 Parts of weightGBcopolymer
2-3 Parts of weightLUTEXALHIT/ GBsynthickner GP
0.3 Parts of weightGBantifoam
PH = 8 with ammonia ( NH40H)
Drying at 120 C curing 90 sec. at 150 C
Machinery floating knife , knife over roll, knife over rubber- blanket etc.
57. Cotton O.B.A. neutral & Bluish
GBphor CA SB
58. Stain & water repellent recipe
GBstain Repellent FC
is used at room temperature in the foulard process.

The liquor pickup ranges from 40 to 90 % depending on the fabric.

Condensation takes place after drying:
3 minutes at 150 C or

45 seconds at 170 C

Application rates: 20-60 g/l GBstainrepellent FC
59. GBbiopolish Enzyme recipe
Activity of GBbiopolish
63 300 CMU/g
60. GBdesizing Enzyme Recipe
61. GBperoxid Killer Enzyme recipe
DOSAGE:

Enzyme dosage will vary with hydrogen peroxide concentration, degree of decomposition, pH temperature and time of reaction. Initially evaluate
0.04-0.4 ml on 1Lit of hydrogen peroxide is recommended
62. Thanks for coming

Gb chem 12th workshop

Business

Transcript of Gb chem 12th workshop